www.Alchemy-Spetec.com

NEXT GENERATION SEAWALL REPAIRSE

AWAL

L RE

PAIR

Repair sea walls instead of replacing them by stopping high flow leaks, filling the voids behind concrete structures and binding loose soil with:

AP Fill 720 & AP Fill 700 — innovative, cost effective, water activated, low viscosity, simple to use closed cell polyurethane injection resins. PROVEN STRENGTH• By being impermeable to water once in place the

likelihood of future erosion is vastly diminished versus refilling the void with soil or other material

• Originally developed over 30 years ago, and continuously improved since, this technology has one of the longest histories of success in the field among engineering uses of polyurethane foams

ENVIRONMENTALLY CONSCIOUS• Avoids having to engage in remediation processes

that are more harmful to the environment such as a complete wall replacement or the excavating of all loose soil

• Phthalate free• Approved for contact with drinking water

APPLICATIONS• Cutting off high flow leaks• Concrete void filling for all structures• Cutting off undergound water flows• Consolidating loose soil• Filling voids under concrete slabs• Encapsulating contaminated soils• Compatible with any sea wall material: concrete,

metal, etc

EFFICIENT INSTALLATION• Results are immediately clear due to the visible

exiting of sea water when the foam is injected• Rapidly sets in less than 10 minutes• Simply injected through pipes directly into voids and

loose sandy soil using a single component pump

Repair leaking sea walls faster, more effectively, and with less effort than with other methods.

Facts AP Fill 720 & 700 Cement Grout

Unit Weight Less than 5lbs/cubic foot

150lbs/cubic foot

Set Time Less than 10 min-utes

Hours to days

Drill Hole 1/2” or less

1.5” to 2” or more

Shrinkage None Yes

Equipment One vehicle for materials and equipment

Multiple trucks and heavy machinery

Tempera-ture

Can be installed in any climate

Limited use below 32° F

AP Fill 720 & 700 vs Cement Grout:

Facts AP Fill 700 Excavation

Expense Much Less Much More

Time Much Less Much More

Mess Much Less Much More

AP Fill 700 vs Excavation:

AP Fill 720 & 700 Technical Specifications:

AP Fill 720• Single component, water acti-

vated, semi-rigid hydrophobic polyurethane foam injection resin requiring catalyst to ad-just set time. High flexibility.

• Accessory: AP Flush 121.• Accessory: AP Injection Ports.• Accessory: AP Soak 130.

Physical Properties 77 degree F (25 degree C) – Liquid:Viscosity ± 215 Centipoise.

Reaction Times (depending on type and amount of catalyst):• Initial Reaction: 5-19 seconds.• Full Rise: 22 seconds to 1 min-

ute, 15 seconds.

“We use Alchemy-Spetec for all our chemical grouting in seawall and soil stabilization projects throughout Florida and the South-east. Their seawall repair material has provided outstanding results on an extensive number of projects. After using a variety of other products in the past, we now believe that Alchemy-Spetec is sec-ond to none. From customer service to tech support, they have surpassed and exceeded all expectations.”

Lewis Evans – Projects / Sales ManagerStable Soils of Florida(352) 433-2323

Customer Testimonial:

AP Fill 700• Single component, water acti-

vated, semi-rigid hydrophobic polyurethane foam injection res-in requiring catalyst to adjust set time. Moderate flexibility.

• Accessory: AP Flush 121.• Accessory: AP Injection Ports.• Accessory: AP Soak 130.

Physical Properties 77 degree F (25 degree C) – Liquid:Viscosity 80 -100 Centipoise.

Reaction Times (depending on type and amount of catalyst):• Initial Reaction: 5-25 seconds.• Full Rise: 16 seconds to 1 min-

ute, 50 seconds.

This information is provided in good faith, but without guarantee. The application, use and processing of the products are beyond our control and therefore your entire responsibility. Should Alchemy-Spetec nevertheless be held liable for any damage, such liability will be limited to the value of the goods delivered by us. We are committed to providing high-quality goods at all times. This version supersedes all previous versions. Revision Date: August 25, 2020 10:16 am

Alchemy-Spetec4508 Bibb Blvd, Suite B5 Tucker, GA 30084

Tech Support:404-618-0438

www.Alchemy-Spetec.com