requirements specification - mdm€¦ · low speed shaft 3. other requirements in atex-design...
TRANSCRIPT
Rot. speed, [min ]
Rot. speed, [min ]
2. Gear unit requirements
Torque , [N·m]
Torque , [N·m]
mm
Low speed shaft
3. Other requirements
in ATEX-design
Contact person
Fax
Telephone
City
Addresse
Company
Enquiry from
Comments
Requirements specification
1. Gear unit type
New design
As replacement for Helical gear unit
Bevel-helical gear unit
Planetary gear unit
other:
Prime mover
Power, [kW]
Rot. speed, [min ]-1
Torque , [N·m]
Auxiliary drive
-1
Gear ratio, [-] Gear ratio, [-]
required centre distance [mm]
-1
Power, [kW]
Driven machine
required number of stages [-]
Application factor
Type of driven machine:
Type of prime mover:
Connecting dimensions [mm] (diameter x length)
High speed shaft Ø
Drawing/sketch is attached Drawing/sketch is attached
Drawing/sketch is attached
×
×Shaft of aux. drive Ø
×Low speed shaft Ø
3.1 Environmental conditions
Tmin [°C] Tmax [°C]...
Place of installation
Base
Drawing/sketch is attached
Operating per day [h] per year [days]
yes no
Operational environment
3.2 Additional information
3.3 Cooling/Lubrication
Direction of rotation: one direction
reversible direction
Prime mover Brake Coupling
Auxiliary drive CouplingBrake
Driven machine CouplingBrake
Lubrication Dip lubrication Oil pump/Oil station
Cooling Fan Cooling coil Heating elements
3.4 Housing
Housing type
Preservation Colouration
3.5 Accessories/Measuring devices
Temperature of bearings Oil sump temperature Pressure Oil level Volume flow Vibration sensors
Mounting position of low speed shaft
horizontal
vertical
Power, [kW]
hollow
solid
Standard temperature range
Oil viscosity (ISO Grades)
RAL colour :
ATEX-Zone
mm
mmmm
mmmm
Country
Seite 1 von 1Revision 0Fo 09