remote data acquisition controllers · power conserving ethernet-enabled remote terminal units ......
TRANSCRIPT
Process
Batch
Discrete
Drives
The Power ofConnectedProduction
Visualize and control production from the wellhead to the point of custody transfer, either on site or from miles away, with our ConnectedProduction™ solution. Fully integrated, scalable control that puts the power of information at your fingertips, it helps maximize the recovery of existing reserves, optimizing production and reducing downtime.
Transform your operation starting from simple data gathering to advanced analytics and workflows that enable real-time decision making. Anytime. Anywhere.
rDAC – The intelligent technology behind the ConnectedProduction Solution
As part of the ConnectedProduction solution, our remote data acquisition controllers (rDAC) are the intelligent assets that collect and distribute data from the wellhead to wherever it is needed. From the control room to the boardroom to even the break room - on site or miles away - these data acquisition controllers are wireless, long-range, and multi-frequency, able to withstand the harsh oil and gas production environments.
• Wireless Transmitters• Gateways• Intelligent RTUs• Low Power RTUs
The ConnectedProduction solution provides an open, integrated architecture that can address your organization’s individual needs. It can help you achieve faster time to oil, lower operational costs and improve efficiency. By providing actionable information, personnel are able to make better decisions and facilitate communication from the wellhead all the way through the enterprise level. Achieve optimization with rDAC intelligent assets from Rockwell Automation® by gathering the information needed for advanced analytics and workflows that enable real-time decisions.
2 | ConnectedProduction ConnectedProduction | 3
Rockwell Automation Solutions
Wireless Transmitters Wireless transmitters are battery-powered, long-range,
low-cost and multi-frequency intelligent wireless sensors.
Compatible with proprietary point-to-multipoint WMP
gateways and RTU devices, these components work
together to offer greater than 99.9% wireless data
reliability. This network platform is specifically designed
for low-power applications such as pressure and
temperature monitoring of remote wells.
GatewaysAggregates packets of data from a variety of sources,
connecting different networks using different
base protocols.
Intelligent RTUsPower conserving Ethernet-enabled remote terminal
units (RTUs) feature expansive memory and hardened
construction for use in remote locations with harsh
environments and extreme temperature ranges, and Class 1,
Division 2 or Zone 2 classified locations. Customizable for
various applications and roles, they can be integrated with
third-party equipment to help provide real-time data.
Low Power RTUsFor sites off the electrical grid, wireless battery powered
RTUs fit in remote locations and can be powered by
replaceable batteries or recharged by solar panels or
wind turbine replaceable or generator. Configurable
sleep and transmit intervals offer long battery life,
typically eliminating the need for a solar power system.
Firewall
Physical Obstruction
rDAC iSensGP andrDAC iSensT2
rDAC iExtnd Repeater
rDAC iSensGP and rDAC iSensT2 (wireless transmission
up to 5 miles)
Micro 850
rDAC iRECV Gateway(up to 10 transmitters)
rDAC iXMS
rDAC iXMS
Long Range Modem
Long Range Modem
rDAC iXC2
ControlLogixPanelViewESP
PCP PowerFlex VFDPowerFlex VFD
(optional)
Well Manager
Plunger Lift Gas Lift Natural Flow
ConnectedProduction On-Premise Infrastructure
4 | ConnectedProduction ConnectedProduction | 5
Wireless Transmitters Intelligent RTUs/Wireless Gateways Low Power RTUs Wireless Repeater
iSensMV™ iSensGP™ iSensDP™ iSensT2™ iXC2™ iXMS™ iSensIO™ iXtend™
Product Multivariable transmitter that measures absolute pressure, differential pressure, and temperature. Seven ranges, available with DP to 840” H₂0, and AP to 1,500 psia.
Wired version only.
Gauge pressure transmitter; five ranges available up to 10,000 psi.
Transmitter that measures absolute pressure and differential pressure. Five ranges available, up to 3000” H₂0 available.
Temperature transmitter with -17 to 200°C range (0 to 392°F).
iXC2 is a site-level controller featuring IEC 61131 programming with ISaGRAF Workbench, two Ethernet ports with embedded webserver and gateway function for up to 100 rDAC wireless transmitters or wireless RTUs.
Wireless, long-range, multi-frequency, spread spectrum data acquisition features plug-and-play radio module for remote telemetry applications, and one 10/100Mbps Ethernet port.
Battery-powered, long-range, and multi-frequency flexible I/O transmitter and is a low cost data acquisition RTU, ideally suited for monitoring and control in hazardous environments. Provides secure and reliable wireless communication and easily installed with minimal deployment and commissioning.
Wireless repeater that extends the range of wireless transmitters and RTUs. Using two radio modems – one for the gateway and one for the sensors – this can improve the range, reliability, and scalability of the network. This license-free 900MHz and 2.4GHz band can be used worldwide with no site licenses, monthly leased lines, or wireless service fees.
Dimensions 13.03”H × 5.96” × 7.32”D 10.19”H × 5.32” × 5.76”D 11.81”H × 5.32” × 5.76”D 15.19”H X 5.32”W X 7.17”D 5.00”W x 4.88”H x 3.54”D 6.5” W × 1.56” H × 4.1” D 4.5”W x 7.95”H x 7.30”D 4.69”W × 3.90”H × 0.88”D
Weight 11.65 lbs 4.6 lbs 9.8 lbs 4.4 lbs 1.2 lbs 1.1 lbs 4.6 lbs 0.6 lbs
Enclosure and Protection
Aluminum, IP67 Aluminum, IP67 Aluminum, IP67 Aluminum, IP67 Anodized aluminum, IP20 Anodized aluminum, IP20 Aluminum, IP67 Molded plastic enclosure, IP20
Mounting Direct Mount or Stand Pipe Process mounted via ½” male NPT sensor thread or mounting bracket for remote mounting
Direct Mount or Stand Pipe Process Mounted DIN Rail Mount DIN Rail Mount Direct Mount or Stand Pipe DIN Rail Mount
Power 7 to 15VDC, 12VDC Nominal (Continuous Power- wired version only) 200mW consumption
3.6V dc Li-Ion cell. 34 Ah lithium-Ion battery pack. Battery life up to 5 yrs, depending on configuration
3.6V dc Li-Ion cell. 34 Ah lithium-Ion battery pack. Battery life up to 5 yrs, depending on configuration
3.6V dc Li-Ion cell. 34 Ah lithium-Ion battery pack. Battery life up to 5 yrs, depending on configuration
8 to 28 VDC; 24VDC Nominal. 4 watts (+12V DC to 28V DC Range) continuous powered operation only
7 to 28 VDC; 12VDC Nominal. 900mW (Max) and 350mW ( Min) continuous powered operation only. 320mW continuous – 0.45 mW in sleep mode
7.2V dc Li-Ion cell. 38 Ah lithium-Ion battery pack. Battery life up to 5 yrs, depending on configuration
8-28 VDC. 1.0W. Transmitting: 250mA @12Vdc. Receiving: 200mA @ 12Vdc
Operating Temperature
-40°C to +85°C(-40°F to +185°F)
-40°C to +85°C(-40°F to +185°F
-40°C to +85°C(-40°F to +185°F)
-40°C to +85°C(-40°F to +185°F)
-30°C to +70°C(-22 °F to + 158°F)
-40°C to +70°C(-40 °F to + 158°F)
-40°C to +85°C(-40°F to +185°F)
-40°C to +85°C(-40°F to +185°F) with option -40°C to +125°C
Operating Humidity
0-95% RHNon-condensing
0-95% RHNon-condensing
0-95% RHNon-condensing
0-95% RHNon-condensing
5-85% RHNon-condensing
0-95% RHNon-condensing
0-95% RHNon-condensing
5-90% RHNon-condensing
Transmission Range
Up to 10km (6.7 miles) dependent on antenna design and geographic location
Up to 10km (6.7 miles) dependent on antenna design and geographic location
Up to 10km (6.7 miles) dependent on antenna design and geographic location
Up to 10km (6.7 miles) dependent on antenna design and geographic location
– – Up to 10km (6.7 miles), dependent on antenna design and geographic location
Up to 10km (6.7 miles), dependent on antenna design and geographic location
Process Connection
1/4” NPT (F) for internal threading ½” NPT (M) for external threading. ¼” NPT (F) for internal threading
¼” NPT (F) for internal threading 1/2” NPT (M) for external threading 1/4” NPT (F) for internal threading 1/2” NPT (M) for external threading – –
User Interface RS-485/USB Modbus RS-485/USB Modbus RS-485/USB Modbus RS-485/USB Modbus COM1 RH-45 F-type connection with LED. RS-485 or RS-232 TD/RD with LED. 1 USB
RS-232 / RS-485 RS-485/USB Modbus RS-232 / RS-485
Sampling Interval
Continuous operation User selectable. 5 sec-18 hrs User selectable. 5 sec-18 hrs User selectable. 5 sec-18 hrs – – User selectable. 5 sec-18 hrs –
Transmission Interval
Continuous operation User selectable. 5 sec-18 hrs User selectable. 5 sec-18 hrs User selectable. 5 sec-18 hrs – – User selectable. 5 sec-18 hrs –
6 | ConnectedProduction ConnectedProduction | 7
PlantPAx, Integrated Architecture, Listen. Think. Solve., Motor Control Center, Total Cost to Design, Develop and Deliver, and PartnerNetwork are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.
Follow ROKAutomation on Facebook & Twitter. Connect with us on LinkedIn.
Publication 1759-PP001B-EN-P – October 2017 Copyright ©2017 Rockwell Automation, Inc. All Rights Reserved. Printed in USA. Supersedes Publication 1759-PP001A-EN-P – June 2016