1

Release Notes 7.22 (v7.22.146.1557) Task Number Summary

505 Add a new functionality in the creation of groups in order to allow a group with indoor units of different systems.

506 Max. number of connectable indoor units after single or double (parallel) SVK-box: 8 units

508 Update Wireless RCs

514 Add Italian Spec Text

Feedback 1: Add space between paragraphs in Spec Text for Italian version in print out report

Feedback 2: Remove an ‘Enter’/ ‘Start new paragraph’ in remote controls and some accessories codes for Italian version in print out report

519 GHP system issue

520 To have 2 different types of warning messages

517 New medium AHU kit model: PAW-160MAH2M, PAW-280MAH2M, PAW-560MAH2M, PAW-280PAH2M

522 Initial view

524 Remove zooming before Set Anchor Action in LoadBackgroungForm

525 Spec Text: Add type of indoor unit name for all language versions in print out report

528 Change some Spec Text in the Swedish version

526 Add snow protection hoods for ME1 OUs and commercial split outdoor units

529 Add spec text in English and Swedish language for new accessory 'Snow protection hoods'

2

Task 505: Add a new functionality in the creation of groups in order to allow a group with indoor units of different systems In Principle Scheme:

● Added possibility to join IUs from different systems into one control group; ● Implemented ability to create new control group among different systems; ● Implemented new option 'Create Cross-System Group' and added to context menu. It

contains list of systems with IUs (only principle schemes ) that are available in the project, so user can join IU from one system with IU from another system:

● Renamed option 'Create Group' on 'Create System Group':

3

● Implemented ability to add indoor unit(s) to control group from different systems; ● Extended option ‘Add Unit(s) To Group’ with list of control groups from other systems:

● Extended option ‘Join Group to Group’ with list of groups from other systems:

4

● Implemented group displaying among systems see example below:

Control Group 3 that contains IU from two systems: System 1:

System 2:

5

In Mounting Scheme: ● Added possibility to join IUs from different systems into one control group; ● Renamed ‘Group Wire Cross - Drawing Connector’ on ‘Group Wire Cross - System

Connector’: ● Implemented possibility use ‘Group Wire Cross-System Connector’ for creating control

group with indoor unit from another system;

● Added option, that all available systems (drawings) are shown after joining group wiring

to connector:

● Implemented navigation:

○ after clicking desired system (drawing) within context menu(screen above), user is navigated to it;

○ it is allowed to continue group wiring drawing->as result IUs from different system can be connected by control wiring;

● Implemented new tooltip for Group Wire Cross-System Connector depending on situations:

1. Group Wire Cross-System Connector is grey/grey (group connection is done from

both sides) : a. Grey on front-end: tooltip has following text: 'Allows to connect objects

located in different systems or drawings. Double click to create / move to the second connection point'

6

b. Grey on back-end: tooltip has following text: <System name>; Drawing: <Drawing name>

2. Group Wire Cross-System Connector is grey/white (connection is done only from one side and connector is added only on current drawing, doesn’t have defined

location on other drawing) : a. Grey on front-end: tooltip has following text: 'Allows to connect objects

located in different systems or drawings. Double click to create / move to the second connection point'

b. White on back-end: tooltip has following text: 'Group wire segment must have two connection points'

3. Group Wire Cross-System Connector is grey/red (connection is done from one

side and connector already has defined location on other drawing) a. Grey on front-end: tooltip has following text: 'Allows to connect objects

located in different systems or drawings. Double click to create / move to the second connection point'

b. Red on back-end: tooltip has following text:<System name>; Drawing: <Drawing name>'

4. Group Wire Cross-System Connector is red/white (connector doesn’t have connection from current drawing and doesn’t have defined location on other

drawing) : a. Red on front-end: tooltip has following text: 'Allows to connect objects

located in different systems or drawings. Double click to create / move to the second connection point'

b. White on back-end: tooltip has following text: 'Group wire segment must have two connection points'

5. Group Wire Cross-System Connector is red/grey (connection is not done from

current drawing and is performed within other drawing) : a. Red on front-end: tooltip has following text: 'Allows to connect objects

located in different systems or drawings. Double click to create / move to the second connection point';

b. Grey on back-end: tooltip has following text: 'System: <System name>; Drawing: <Drawing name>';

7

6. Group Wire Cross-System Connector is red/red (no connection from both sides,

but has defined location on other drawing) : a. Red on front-end: tooltip has following text: 'Allows to connect objects

located in different systems or drawings. Double click to create / move to the second connection point'

b. Red on back-end: tooltip has following text: <System name>; Drawing: <Drawing name>

● Implemented that group displaying among systems is the same as if IUs are in different drawings on mounting scheme, see examples below:

General:

● It is not allowed to join IU(s) between mounting schemes and principal schemes. ● Action manager (Undo/Redo option) now works per project not per system as it was before; ● Implemented increment group naming per project; ● Implemented validation (rules) of control group among the systems:

Global warning: 1. ‘Group n has no main controller’ 2. ‘Group n should contain 1 or 2 controllers’ 3. ‘Group n cannot contain more than 1 master controller’ 4. ‘Group cannot have Sub Remote Controller and Sensor at the same time’ 5. ‘Group n cannot contain more than 8 units’ 6. ‘Group n cannot contain more than one Sensor’

Item warning: 1. ‘Control group has no main controller’ 2. ‘Group should have 1 or 2 controllers connected’

8

3. ‘Group cannot contain more than 1 master controller’ 4. ‘Control group cannot have Sub Remote Controller and Sensor at the same time’ 5. ‘Group n cannot contain more than 8 units’ 6. ‘Group cannot contain more than one Sensor’

Appropriate warning messages are displayed for each system in the group. ● Implemented sensor improvements:

1. If user selects Sensor for IU1 (not a Master Unit) and then change Master from one IU to another -> Sensor remains on the unit;

2. If Sensor is on Master and user sets another IU as a master then Sensor is NOT moved to new Master;

3. If IU with Sensor is deleted from Control Group -> Sensor is NOT moved on the Master;

4. If Remote Controller CZ-RTC3/CZ-RTC4/CZ-RTC5 is set on IU1 and ECONAVI Sensor(ES) is set on IU2, after changing RC model in IU1 to not applicable for ES => Sensor is cleared at all and message box 'ECONAVI Sensor was removed because there is no suitable Remote Controller for Group 1' appears:

● Implemented restrictions:

1. It is not be possible to create 'Project' Group among (with) FS-Multi system: a. Principle scheme: Option 'Create Cross System Group' is absent for FS-Multi

system(s) and ‘Add Unit(s) to Group’, ‘Join Group to Group’ is not extended with other system(s) in FS Multi;

b. Mounting scheme: Group Wire Cross-System Connector is not extended with other system in FS Multi and FS-Multi systems are not available for selection in VRF,commercial Split systems

2. Implemented global error message and item warning: ‘Hydrokit can not be added to

the Control Group’ 3. Implemented global error message and item warning: ‘Group n can not contain

combination of WHE and other type of indoor unit'; 4. Implemented global warning: ‘Group <n> contains both 2-pipe and 3-pipe indoor

units, so for 3-pipe system indoor unit(s) AUTO mode is not available’ -> in case of combining any 2way system indoor unit(s) + any 3way system indoor unit(s);

5. Implemented global warning message: 'Group <n> contains both commercial split and VRF indoor units';

6. Global warning message: 'Group <n> contains both Air Curtain unit and other type of Indoor unit' is added;

9

7. Global warning message:'Group <n> contains both AHU kit with other type of indoor' Back on top

Task 506: Max. number of connectable indoor units after single or double (parallel) SVK-box: 8 units

● Implemented error popup window in case of connecting more than 8 indoor units after single(double) SVK box:

Back on top

Task 519: GHP system issue ● Fixed issue related to cloning 2-way ECOi system and changing OU to 2-way ECO G OU

unit; Back on top

Task 517: New medium AHU kit model: PAW-160MAH2M, PAW-280MAH2M, PAW-560MAH2M

● Added new models and combinations to AHU kit (MAH) range: ○ PAW-160MAH2M; ○ PAW-280MAH2M; ○ PAW-560MAH2M; ○ PAW-560MAH2M, PAW-280MAH2M; ○ PAW-560MAH2M, PAW-560MAH2M; ○ PAW-560MAH2M,PAW-560MAH2M,PAW-280MAH2M; ○ PAW-560MAH2M,PAW-560MAH2M,PAW-560MAH2M;

● New model PAW-280PAH2M is added to AHU kit (PAH) range; ● Timer Remote Controller (CZ-RTC2) is included as Main RC for new medium AHU units; ● Mini Seri-Para I/O unit (CZ-CZPBC2) is included as Sub RC for new medium AHU units; ● All technical data, images, calculation and restrictions will be taken from already added

Deluxe and Light models; ● Updated spec texts for AHU kits

Back on top

10

Task 522: Initial view ● Fixed issue related to initial view during opening project. It is automatically fit to the

screen in case of opening project. Back on top

Task 524: Remove zooming before Set Anchor Action in Load Background Form

● Removed zooming (in/out) after clicking ‘Anchor’ option, drawing view remains as is; Back on top

Task 508: Update Wireless RCs ● Updated Wireless Remote Controller (Wall Mounted) CZ-RWSC2 to CZ-RWSK2+ RWSC3

(receiver) (see table below):

● Updated Wireless Remote Controller (Unit Mounted) CZ-RWSL2 to CZ-RWSL2N for 2-way

Cassette ML1 series

● Updated Wireless Remote Controller (Unit Mounted) CZ-RWST2 to CZ-RWSD2 for MD1

series

● Updated Wireless Remote Controller (Unit Mounted) CZ-RWSU2 to CZ-RWSU2N for

MU1_A, PU1_A series

● Updated Wireless Remote Controller (Unit Mounted) CZ-RWST3 to CZ-RWST3N for MT2,

PT2 series

In case of opening old project -> old 'CZ-RWST3' is automatically replaced by CZ-RWST3N without any warning messages;

11

● In case of opening old project with Applied warning with selected old Wireless RC =>global

warning and additional

'Update Wireless RC's models' button Is displayed;

● Added appropriate Spect Text for new Wireless RCs;

Wireless RC old and new models

Back on top

Task 520: To have 2 different types of warning messages ● Updated all messages according to requirement: - errors:

- warnings:

● Implemented that printout report contains two types of messages: Errors and Warnings:

12

Back on top

Task 514: Add Italian Spec Text

Feedback 1: Add space between paragraphs in Spec Text for Italian version in print out report

● Added space between paragraphs in Spec Text for Italian version (Indoor Units, Outdoor Units and Accessories) in print out report:

13

Feedback 2: Remove an ‘Enter’/ ‘Start new paragraph’ in remote controls and some accessories codes for Italian version in print out report

● Implemented location model of remote controls and some accessories codes in one line for Italian version in print out report:

14

Back on top

Task 525: Add type of indoor unit name for all language versions in print out report

● Added type of indoor unit name for all language versions in print out report for Spec Text :

Back on top

Task 528: Change some Spec Text in the Swedish version ● Сhanged spec text in the Swedish version for following OU models:

U-50PE1E5 U-60PE1E5 U-60PE1E5A U-60PEY1E5 U-71PE1E5 U-71PE1E8 U-71PE1E5A U-71PE1E8A

15

U-71PEY1E5 U-100PE1E8 U-100PE1E8A U-100PEY1E8 U-125PE1E8 U-125PE1E8A U-125PEY1E8 U-140PE1E8 U-140PE1E8A U-140PEY1E8 U-200PE1E8 U-250PE1E8

Back on top

Task 526: Add snow protection hoods for ME1/PE1 OUs

1. Added check box 'Snow Protection Hood' to wizard screen for 2-pipe Electric VRF ● 2-pipe ECOi 6N:

● 2-pipe ECOi 6N, HI-COP:

2. Added check box 'Snow Protection Hood' to Outdoor Selection window for 2-pipe Electric

VRF ● 2-pipe ECOi 6N:

16

● 2-pipe ECOi 6N, HI-COP:

3. Added check box 'Snow Protection Hood' to wizard screen for Commercial Split OUs:

- U-50PE1E5; - U-60PE1E5(A); - U-60PEY1E5; - U-71PE1E5/8(A);

17

- U-71PEY1E5; - U-100PE1E5/8(A); - U-100PEY1E5/8; - U-125PE1E5/8(A); - U-125PEY1E5/8; - U-140PE1E5/8(A); - U-140PEY1E8; - U-200PE1E8(A); - U-250PE1E8(A):

4. Added check box 'Snow Protection Hood' to Outdoor Selection window for Commercial

Split OUs:

5. Implemented possibility to add accessories to outdoor units automatically, when user

ticks on a field called ‘Snow Protection Hood’:

18

● accessories: PAW-WPH1 + PAW-WPH3 are exported for U-8ME1E81 / U-10ME1E81 / U-12ME1E81 (1 set for each outdoor unit) into Equipment List per System, Summary Equipment List, Price List into printout report and to System, Project Equipment excel file:

● accessories: PAW-WPH2 + PAW-WPH3 are exported for U-14ME1E81 / U-

16ME1E81 (1 set for each outdoor unit) into Equipment List per System, Summary Equipment List, Price List into printout report and to System, Project Equipment excel file

19

● accessories: 2x PAW-WPH1 + PAW-WPH3 are exported for U-18ME1E81 / U-20ME1E81 (1 set for each outdoor unit) into Equipment List per System, Summary Equipment List, Price List into printout report and to System, Project Equipment excel file

● accessory: PAW-WPH7 is exported for U-50PE1E5 / U60PEY1E5 models into Equipment List per System, Summary Equipment List, Price List into printout report and to System, Project Equipment excel file

● accessory: PAW-WPH8 is exported for U-200PE1E8(A) / U-250PE1E8(A)models into Equipment List per System, Summary Equipment List, Price List into printout report and to System, Project Equipment excel file

● accessory: PAW-WPH9 is exported for U-60PE1E5(A) / U-71PE1E5/8(A) / U-100PEY1E5/8 / U-125PEY1E5/8 models into Equipment List per System, Summary Equipment List, Price List into printout report and to System, Project Equipment excel file

● accessory: PAW-WPH10 is exported for U-100PE1E5/8(A) / U-125PE1E5/8(A) / U-140PE1E5/8(A) / U-140PEY1E8 models into Equipment List per System, Summary Equipment List, Price List into printout report and to System, Project Equipment excel file

Back on top

Task 529: Add spec text in English and Swedish language for new accessory 'Snow protection hoods'

● Added spec text in English and Swedish language for new accessory 'Snow protection hoods'

English version:

Swedish version:

20

Back on top