reducing impact of accident -final
TRANSCRIPT
PROJECT WORK
FINAL REVIEW
PROJECT MEMBERS
SARAVANAKUMAR.R (109012015223)
PETCHIMUTHU.K (109012015214)
JUSTICEGOBINATH.A (109012015198)
PROJECT GUIDED BY
MR. D.M.MADHUVANESAN. M.Tech
ABSTRACT
Most of the injuries are all happened only by sudden impact of accident
Impact force absorber can reduce the impact force acting on the vehicle and prevent accident
absorber system fully analyzed then conclude how much of impact effect could be reduced by absorber while accident happen
Details of systems
• Spring system(combine of compression & tension)
• Fluid system(synthetic suspension oil made by silicone)
• Check valve system(ball check valve)
Spring system
• Compression and tension spring have 1” wire dia
• Compression spring have 2 inch pitch
• Tension spring have 1 inch pitch
• Both are outer dia of 3.5 inches
IMPACT ABSORBER
•Its able to absorb the impact forces and reduce the damages of vehicle, also save the human life.
•Its placed on the bumper and chassis between the vehicle
SKELETEN VIEWS• It works in 2 steps
• 1st step(impact force application)
• 2nd step(Reaction by spring)
Analyzing Report
• solid works and ansys software used to analyzed absorber system
• aluminum alloy as part material
• it could be applied 60000N force on single absorber system.
• The Result are shown given below
Calculating impact force of various
vehicleS.NO MAKE MODEL MASS
(WITHPASSENGERS)
SPEED(km/hr)
IMPACTFORCE(N)
NO.ABSORBER
1 FIET PUNTO 1540 70 289797.2 5
2 FORD FIGO 1440 70 270979 5
3 CHEVROLET SPARK 1255 70 243526.47 5
4 HYUNDAI I10 1260 70 237106.8 4
5 MARUTHI ALTO 1135 70 213584.3 4
6 VOLKSWAGEN POLO 1475 70 277565.5 5
7 TATA MAGIC 1700 70 321373.45 6
conclusion
• Installation of this project arrangement in the four wheeler vehicle the following aspect will be saved.
• Save the human being life
• Reduce the damage of vehicle body
• Reduce the fear of accident
• Reduce the impact of accident