recruitment initial data entry

8/3/2019 Recruitment Initial Data Entry

1/9

www.SAPconfig.com Page 1 (c) 2007

RecruitmentInitial Data Entry

Introduction

In the recruitment module, after a vacancy has been created and it has been advertised, it will be

necessary to enter applicants details into the recruitment module.

There are two basic levels of data entry:1. Initial: This will record the name, address and various other fields. At this stage an applicant

number is generated.2. Additonal Data: Here the vacancy/ies applied for are entered, plus qualifications and previous

employer details, if required.

You should have already worked through our other recruitment documents: Creating a Vacancy andCreating an Advertisement which are both available in our knowledge library at www.SAPconfig.com

Initial Data Entry

Here we will enter basic data for a person that has applied for a position advertised in a vacancy.

From the SAP Easy Access Menu navigate to the following:

(Transaction PB10)

The initial entry of basic data screen will be displayed, like so:


2/9


The fist section to be explained is towards the top of the screen:

The Ap.No field is for the applicant number. When an applicants details are entered into therecruitment module, an applicant number is allocated to him/her. In this system (and most others) thenumber is generated automatically and should be left blank.

The field Start is the start date of the applicant. Any date can be entered here, but typically this wouldbe the day the data is entered, or the day the application was received, depending on the requirementsof your implementation.

The Status is automatically assigned, so the next field to enter is the reason for the status. Select an

appropriate reason from the list by clicking the drop down list:


3/9


Because this is initial data entry, there is only one reason to choose:

Select the reason from the list.

Note there are other fields to enter:

In this simple example, the reference available, assign facsimiles, and Pers.no. fields are not used.They are explained here for clarity:

Reference available Tick this field if the applicant has been recommended by anemployee of the company.Pers.no. If the applicant is an existing (internal) employee, or has previously been

employed by the company, enter that employee number here.Assign facsimiles Tick this field and documents can be connected/assigned to the applicant,

This can be for CV documents, scanned application forms, etc. Assigningfacsimiles is detailed in a separate Recruitment document in our library.

After completing these header fields, the next field to fill is the Personnel Area. Click the drop downbutton at the side:

and a list of possible entries will be displayed:


4/9


Note: It is important to understand that the configuration of the data entry screens for each of thesepersonnel areas can be different. For example. different address fields are required for differentcountries. The country code is taken from the Personnel Area list above as shown in the CGrpgfield which is for the country grouping.

Choose an appropriate entry from the list, in our example we will choose 300 United States.

Next, click to the (Personnel) Subarea field. This is a further division within the Personnel Areaselected above (US). Click the drop down button as shown:

The list of available subareas will be displayed; select an appropriate entry:


5/9


The next field to enter is the Ap group. This is the applicant group. For those who are familiar withSAP HR Personnel Administration will be familiar with the employee group field. The applicant groupin recruitment is very similar to the employee group in Personnel Administration. Click the field dropdown button as shown:

The list of applicant groups are shown. Select the appropriate entry:

Note: The applicant groups shown above are typical examples of the applicant groups used in animplementation. The use of the words internal and external refers to whether the applicant alreadyworks for the company (internal) or is an outside applicant/person (external).

The next field to fill is the Appl.range which is the applicant range. According to which applicantgroup has been selected, the entries on the Appl.range list may be different. The applicant range is

very similar to the employee subgroup in personnel administration. Choose an appropriate entry fromthe list, as shown:

Now the Pers.off field should be filled. This is the Personnel Officer and is an important field inrecruitment. Click the drop down button, as shown:


6/9


In this example we will choose Anja Muller:

After filling these important fields (above), the user should now move to the personal data fields. Herethe title, first name, surname/last name, language, second title, date of birth and nationality should befilled in as appropriate. Here we see an example:

Next, the applicants address is entered, along with a telephone number and email address:

Note: the fields may appear slightly differently depending on which country the personnel area belongsto, and if you have been in this screen before.

The final section to complete is the Application:

In this section, if the application has been received for a particular advert, then click into the advert fieldand click the drop down button:


7/9


A list of recruitment advertisements will be displayed:

Select the appropriate advert from the list. For this tutorial we created the HR Manager advert at thetop of the list above. If you are not familiar with how to create recruitment advertisements and/orvacancies, we recommend you read through our other recruitment documents at www.SAPconfig.com

Note: this tutorial is a simple example with an advert. The Unsol.AG field is for an unsolicitedapplicant group. This field is used to group applicants that are not received from a particularadvertisement, e.g. perhaps general applications received in the post. This will be covered in our otherrecruitment documents.

After entering the fields, the screen will look similar to this:


8/9


After this basic data has been entered, there are various ways in which this screen can now beprocessed. In the next document in our recruitment series Additional Data Entry, you will learn how touse the Further data fields, and the button Save+add.data.

For the completion of this basic example, all that remains is to press save .

Note: After pressing save, each of the sets of fields entered are checked. Depending on which countryyou are entering data for (taken from the personnel area), it is possible that there are more fields thatneed to be filled in. So, in the example above, when pressing save (without selecting Further data)the Personal data screen appears:

This is because the gender needs to be selected:

The gender field may, or may not appear on the main data entry screen, depending on which countryyou are entering data for, and what you have used the screen for before.

Any of the data screens may appear with further fields to enter. On each screen, simply fill in therequired data and press save. After all the screens have been completed, the main data entry screenwill appear, and you will be notified at the bottom of the screen what applicant number has beenallocated to the person just entered:


9/9


It is important to note the applicant number from the bottom of the screen (shown above). Typicallythis would be written on the application form.

Further applicants details can be entered now, just by filling the fields again and pressing save.

When all details have been entered, exit from the screen by using the green arrow to go back tothe easy access menu.

This concludes our basic tutorial of Recruitment Initial Data Entry. Students should now move on toour next document Recruitment Additional Data Entry available from www.SAPconfig.com

recruitment initial data entry

Documents