quick reference colour 5” & 7” touch dash guide · arm r.p.m system arm rpm for alarm...

Quick Reference Colour 5” & 7” Touch Dash Guide

MicroTech Automotive Systems © ver.1.3 �1


GPS Input

Buzzer

USB Port

84mm

16mm88.5mm

124m

m

23mm

CAN Hi+12v

SpareInput 1Input 3AUX 1AUX 3

Push Button

(Optional)

CAN LoGnd

SpareInput 2Input 4AUX 2AUX 4

24mm

Optional Functions:Input-1 - Right IndicatorInput-2 - Left IndicatorInput-3 - Lights ONInput-4 - High Beam ON

Aux-1 - Alarm Output (-ve trig)Aux-2 - General Purpose Aux Output (-ve trig)Aux-3 - Speed Input (optional)Aux-4 - Fuel Level Input (optional)

Dash 7” Dimensions

177mm


RPM Shift LED’sTouch Hot Corner, Display Handset

Touch Hot Corner, Display Configuration

Touch Hot Corner, Scroll Data Screens

Touch Hot Corner, Scroll Diagnostic Screens

Acknowledge LED Alarm LED

Screen Page Number

Dash Mode &

Input Status

Field 1

Field 3

Field 5

Field 7

Field 2

Field 4

Field 6

Field 8

Data Screen 2:

Data Screen 2:

AUX Input 1 Indicator

AUX Input 2 Indicator

Data Screen 1


Data Screen 3

Data Screen 4

Field 1

Field 3

Field 5

Field 7

Field 1

Field 3

Field 5

Field 7

Field 2

Field 4

Field 6

Field 8

Field 2

Field 4

Field 6

Field 8

Handset Programming Screen(Page 1)


Function: Displays the name of the function

being view.

Adjust: Displays the adjustment value currently

being view or edited.

Screen/Mode: Displays the screen

number being referenced or

indicates that the DASH is in

PROGRAM mode.

REF Buttons (Blue):The REF buttons are

used to scroll through the settings available on each

screen. These buttons work the same way in either view or program

mode.

Fast increment / decrement:

While in program mode.

Quick Function

Keys

Quick Function

Keys

Quick Example Adjusting Data_1 Field No. 1 to display MAP KPA (func_2)1. Touch Top Left Side Hot Corner to display Handset2. Scroll to Page_2 Dash Display DaTa_1 & 23. Press mode button to enable programming mode4. Press the up or down REF button until it displays MAP KPA (func_2)5. Press mode button again to save the change made and exit programming mode

Handset Programming Screen (Page 2)


Mode Button (red):

Switches the DASH between

VIEW and PROGRAM

modes

FUNC/ADJ Buttons (Blue):- In VIEW mode, these are the

FUNCTION buttons and are used to scroll up and down through the function screens.

- In PROG mode, these are the ADJUST buttons and are used in conjunction with the ADJ display to make changes to the program.

Page Up/Down: While in program mode

Quick Setup

Screens

Copy/Paste Data

Delete Current

Data

Dash Software Flow Chart


MicroTech Welcome Screen

Page_14 GPS

Page_1 Dash Display - Setup Screen

Page_2 Dash Display - DaTa_1 & 2

Page_3 Dash Display - DaTa_3 & 4

Page_4 Alarm Limits - Setup_5

Page_5 Alarm Count - Displays

Page_6 Warning Limits - Setup_6

Page_8 LOG Channels - Setup_2

Page_7 LOG Channels - Setup_1

Page_15 Dash Configuration Setup

Page_16 Dash Identification Setup

MicroTech Auto Screen

Page_13 Input Sensor Cal

Page_12 AUX Channels - Labels

Page_1 Dash Display - Setup Screen Page_2 Dash Display - DaTA_1 & 2


Select what Data is to be displayed on Dash Data Screens

L.E.D_1 rpm

Adjust RPM/Activation point on LED group 1

L.E.D_2 rpm


L.E.D_3 rpm


L.E.D_4 rpm


Shift -> rpm

Adjust RPM Shift point

Main_fn Adjust Speed and Gear Display on Main Dash Screen

Spare_1 No Function

Spare_2 No Function

Spare_3 No Function

Screen1 Adjust Background colour on Data Screen 1




Screen5 Adjust Background colour on Timing Screen

Dimmer Light

Dims Dash Display when lights turned on (input #3)

DispDly Sec

Warning and Lap Time Display time

Data1_1 Adjust the function that is to be displayed on the Dash Data Screen 1, Field No. 1
















Page_3 Dash Display - DaTA_3 & 4 Page_4 Alarm Limits - Setup_5


Select what Data is to be displayed on Dash Data Screens

















RPMcut cold Maximum RPM value when water temperature is cold

Water_T Min Minimum value of Water Temperature for Alarm Notification

WaterT Max Maximum value of Water Temperature for Alarm Notification

Air_T Max Air Temperature Maximum Value for Alarm Notification

BoostMaxBAR Boost Maximum Value for Alarm Notification

BatteryMin Battery Minimum Value for Alarm Notification

Oil_pBarMin Oil pressure minimum value for Alarm Notification

FuelpBarMin Fuel pressure minimum value for Alarm Notification

Lambda Min Lambda minimum value for Alarm Notification

SPEEDmaxKPH Maximum speed for Alarm Notification

ExhTempMaxC Maximum Exhaust Temperature for Alarm Notification

ARM R.P.M System Arm RPM for Alarm Function to operate

ARM T.P.S System Arm TPS for Alarm Function to operate

Alm R.P.M Alarm Notification RPM

Alm Time s Alarm Notification Display time

Alm Buzzer Alarm Notification Buzzer On/Off

Setup Minimum and Maximum Limits for Alarm Notification

Page_5 Alarm Count - Displays Page_6 Warning Limits - Setup_6


RPMcut RPM cut Alarm Count

Water_T Max Water Temperature Maximum Alarm Count

Air_T Max Air Temperature Maximum Alarm Count

Boost Max Boost Maximum Alarm Count

Battery Min Battery Minimum Alarm Count

Oil PresMin Oil Pressure Minimum Alarm Count

FuelPresMin Fuel Pressure Minimum Alarm Count

Lambda Lambda Alarm Count

Speed Max Maximum Speed Alarm Count

ExhTemp Exhaust Temperature Alarm Count

Spare no.1 No Function




TOTALalarms Total Alarm count

MAX Allowed Maximum Alarm count before check engine is displayed

SPEEDmaxKPH Maximum Speed Data warning colours to be displayed on Dash

WaterT MinC Minimum Water Temperature Data warning colours to be displayed on Dash

WaterT MaxC Maximum Water Temperature Data warning colours to be displayed on Dash

BoostMinBAR Minimum Boost Data warning colours to be displayed on Dash

BoostMaxBAR Maximum Boost Data Warning colours to be displayed on Dash

Lambda LEAN Minimum Lambda Data Warning colours to be displayed on Dash

Lambda RICH Maximum Lambda Data Warning colours to be displayed on Dash

Oil_pMinBAR Minimum Oil Pressure Data Warning colours to be displayed on Dash

Oil_pMaxBAR Maximum Oil Pressure Data Warning colours to be displayed on Dash

FuelpMinBAR Minimum Fuel Pressure Data Warning colours to be displayed on Dash

FuelpMAXBAR Maximum Fuel Pressure Data Warning colours to be displayed on Dash

ExhTempMinC Minimum Exhaust Temperature Data Warning colours to be displayed on Dash

ExhTempMaxC Maximum Exhaust Temperature Data Warning colours to be displayed on Dash

Air_T Max C Maximum Air Temperature Data Warning colours to be displayed on Dash

Battery_HI High Battery value Data Warning colours to be displayed on Dash

BatteryLOW Low Battery value Data Warning colours to be displayed on Dash

Logs All Alarm Types: Count 0-255 Setup Minimum and Maximum Warning Colours for DASH Data Display Values

Page_7 LOG Channels - Setup_1 Page_8 LOG Channels - Setup_2


Log_Ch1 Setup Data function to be logged on Channel 1
























Spare_1 No function

Spare_2 No function

Spare_3 No function

Spare_4 No function

Spare_5 No function

GPSlogOn/Off

Turn on logging via GPS location

Log On RPM Turn on logging via RPM

LOG on K.P.H Turn on logging via Speed

Setup Logging Channels Setup Logging Channels

Page_12 AUX Channels - Labels Page_13 Input Sensor Cal


Press_1 Label assigned to Pressure 1 0-5v input




Temp_1 Label assigned to Temperature 1 input

Temp_2 Label assigned to Temperature 2 input

RPM_1 Label assigned to RPM_1 input

RPM_2 Label assigned to RPM_2 input

RPMinp1 Tooth count for RPMinp1 trigger wheel

RPMinp2 Tooth count for RPMinp2 trigger wheel

Spare_6

Spare_5

Spare_4

Spare_3

Spare_2

Spare_1

0-5v_1 Pressure Sensor type for 0-5v input 1





Tank Tank Size in litres (Note 00 = Display fuel level as a Percentage)

FuelLo Calibration Low tank value

FuelHI Calibration Full tank value

ALMlow Low Fuel warning display (percentage)

HIbyte

MID_16

LObyte

Weight

ChkEng

TPSmin

TPSmax

Factory Use OnlyFactory Use Only

Page_14 GPS Page_15 Dash Configuration Setup


Data Screens Dash Data Screens to be displayed

Start Screen Dash Screen to be displayed at start up

Timing Mode Lap time or Drag mode for timing screen

Mode Setup CAN input Protocol (ECU dependant)

DataProtocol Factory Use only

Temp Temperature Values to be displayed in C° or F°

Pressure Pressure Value to be displayed in KPA or PSI

INPvalues Factory Use only

AFRdis Air Fuel/Type to be displayed

AuxIn Setup Aux inputs for Standard or Indicator Function

Spare

GMTime Time to be added to GPS GMT Time (country dependant)

G_Long Factory Use only

G_Lat Factory Use only

Piezo Vol Piezo volume 0% to 100%

PROG Enable configuration programming or lock Dash editing

Lat N/S_1

Lat Degs_1

Lat .dd_ _1

Lat .dddd1

Long E/W_1

Long Degs1

Long.dd_ _1

Long.dddd1

Lat N/S_2

Lat Degs_2

Lat .dd_ _2

Lat .dddd2

Long E/W_2

Long Degs2

Long.dd_ _2

Long.dddd2

GPS Memory

Storage AreaLocation 1

Factory Use Only

GPS Memory Storage Area

Location 2Factory Use Only

Page_16 Dash Identification Setup


Char1=D

Char2=A

Char3=S

Char4=H

Char5=7

Char6=g

Char7=p

Char8=s

High Byte

Low Byte

Pin#1

Pin#2

Pin#3

Pin#4

Pin#5

Pin#6

These screens allow you to give an 8-characters name to your program; this is the name that appears in the ID screen when the DASH is turned on. Naming a program makes identifying your different set-ups simple. To edit your program name scroll to the characters you wish to alter and use the ADJ buttons/up or down arrows to set the desired character. For example, to name a program “4cyl_tur”, scroll to the Char1 screen, switch to program mode and use the up/down buttons to set the first character i.e.: “4”. Now scroll rights to the Char2 screen and set the second character, “c”. Set the rest of the characters in the same way (Screens Char3 to Char8), then switch back to view mode. The name you have entered will now appear as the program description in the ID screen.

These screens allow you to set the 6-digit security number for the DASH, and are set in the same ways as the Char screens (above). If all six of these screens are set to “0” (i.e. the PIN number = “000000”), the security lock features of the DASH will be switched off.

IMPORTANT NOTE: If you set a PIN number for your DASH, make sure you write the number down keep it in a safe place as you will

not be able to program your DASH!

DASH CAN Identification Factory Use Only

MicroTech Auto Screen


Save to memCAL#1

Save to memCAL#2

Save to memCAL#3

Save to memCAL#4

LOAD memCAL #1

LOAD memCAL #2

LOAD memCAL #3

LOAD memCAL #4

Erase DaTa LOG If unit has Data logging enabled pressing mode button twice, will erase on board Data log. Also display’s logging time used in minutes.

When the DASH is unlocked, the left/right arrows scroll through the program selection options. The DASH software has four memories called memCALs, which allow for the storage and retrieval of different set-ups. These memories are stored on a DASH memory chip. Note that these memories cannot be accessed, when DASH is locked.

The memCALs are accessed by using the left/right arrows to scroll to the desired memory area (memcal 1-4) then pressing the MODE button twice, e.g. pressing the MODE button twice when the display reads “Save to memCAL#3” would store the current settings in memCAL 3. While a program is saved or loaded, the display will read “Programming Please Wait”. The memCALs can also be most useful for temporarily storing data while working on programs; if you want to try an adjustment but don’t want to lose the data you already have, save your settings in one of the memCAL areas and it can be retrieved later if your adjustments don’t work.

quick reference colour 5” & 7” touch dash guide · arm r.p.m system arm rpm for alarm...

Documents