Question

Fa 0/0: 172.16.31.35 /27 (27 bits is needed for subnet)

So 3 bits were borrowed from the host.172. 16. 31. 000 00000 - means host nos. are from 0-31172. 16. 31. 001 00000 - means host nos. are from 32-63

Selecting 4 will is NOT correct. 172. 16. 31. 32 is a network address so cannot be used for host.

1) Subnet mask is wrong2) Broadcast address3) Subnet mask is wrong4) Network address5) Subnet mask and default gateway is wrong6) Correct answer

Question

Correct answer for this should be: No. 210.10.9.37255.255.255.22410.10.9.351. Subnet mask is wrong2. Correct Answer3. Subnet mask is wrong4. Is a network address5. Gateway is wrong6. Is a broadcast address

QuestionAn organization has been assigned network ID 10.10.128.0 and subnet mask 255.255.224.0. Which IP address rangecan be used for this organization?

10.10.128.0 to 10.10.160.25510.10.128.0 to 10.10.159.25510.10.128.0 to 10.10.192.25510.10.128.0 to 10.10.0.15910.10.128.0 to 10.10.159.0**

To me the answer should be: 10.10.128.0 to 10.10.192.255

Subnet Mask is 255.255.224.0 - 3 bits were borrowed from the host255.255.100 00000. 0000 0000

So the network shoule be:10.10.100 00000. 0000 0000 - IP address: 10.10.128.0 - 10.10.128.255 - Available Range10.10.101 00000. 0000 0000 - IP address: 10.10.160.0 - 10.10.160.255 - Available Range10.10.110 00000. 0000 0000 - IP address: 10.10.192.0 - 10.10.192.255 - Available Range10.10.111 00000. 0000 0000 - IP address: 10.10.224.0 - 10.10.224.255 - Answers not available

Question

Refer to the exhibit. The NAT functionality of the router is enabled to provide Internet access to the PC. However, the PC is still unable to access the Internet. Which IP address should be changed to 209.165.201.1 to enable the PC to access the Internet?

192.168.1.191192.168.1.101192.168.1.1192.168.1.254

To me the answer should be 192.168.1.254

Question

Refer to the exhibit. What is required on host A for a network technician to create the initial configuration on Router1?

an FTP clienta Telnet clienta terminal emulation programa web browser

Ans: ????

To me the answer should be a terminal emulation program. Because you are talking about "Initial Configuration"

Question

Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and a Layer 3 address will enable this access from host A?

Destination MAC: 0030.8596.DE83 Default gateway: 209.165.202.130Destination MAC: 0030.8596.DE82 Default gateway: 172.16.9.2Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1Destination MAC: 0030.8517.44C4 Default gateway: 209.165.202.130

During the encapsulation process, what identifiers are added at the transport layer?

1) source and destination IP addresses

2) source and destination MAC addresses

3) source and destination port numbers

4) source and destination channel identifiers

Ans : ????

source and destination IP addresses

Question

Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and a Layer 3 address will enable this access from host A?

Destination MAC: 0030.8596.DE83 Default gateway: 209.165.202.130Destination MAC: 0030.8596.DE82 Default gateway: 172.16.9.2Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1Destination MAC: 0030.8517.44C4 Default gateway: 209.165.202.130

Ans :?????