Industrial Hydraulics Ducting Pneumatics

email: admin@hishose.com.au

MISCELLANEOUS

INDUSTRIAL CATALOGUE

www.hishose.com.au

Proprietary Limited

WESTERN BRANCH28 Spencer StreetSunshine West Vic 3020Tel: (03) 8311 7400Fax: (03) 9311 2322

EASTERN BRANCH73-81 Bessemer DriveDandenong South Vic 3175Tel: (03) 9794 9299Fax: (03) 9794 9992

NORTHERN BRANCH169-171 Northbourne RdCampbellfield Vic 3061Tel: (03) 9305 4600Fax: (03) 9305 4231

Quality ISO 9001

CERT NO QEC22270

2

MIS

CE

LLA

NE

OU

SC

ATA

LOG

UES

Other Catalogues Available:

� Barfell Plastic Hoses & Tubes

� IPL Plastic Hose

� Hose Clamps & Clips

� Industrial Rubber Hose

� Plastic Tubing & Recoil Hose

� Automotive

Email Enquiries: admin@hishose.com.au3

E & O.E 2006

MIS

CE

LLAN

EO

US

Threadlocking 4 & 5

Thread Sealing 6 & 7

Gasketing 8 & 9

Instant Bonding 10 & 11

Loc-Line Modular Hose System 12 - 18

Chemtools 19

CO

NTEN

TS

Contents:

4

MIS

CE

LLA

NE

OU

S

REF: 88-1107

THR

EAD

LOC

KIN

G

Loctite 290Recommended for locking pre-assembled fasteners, eg. instrumentation screws, electical connectors and set screws.

Loctite 222Recommended for low strength threadlocking of adjusting screws, counter sunk head screws and set screws; on collars, pulleys, tool holders, and controllers.

Also use on low strength metals such as aluminium or brass which could break during disassembly.

Handy Hints:• Clean parts with Loctite ODC Free Cleaner before applying the adhesive• If the threadlocker will be applied below 5°C, pre-treat with Loctite 7471 or 7649 Primer.• If the parts were in contact with aqueous washingsolutionsorcuttingfluidswhich leave a protective layer on the surface, wash with hot water before use• Use 480 if either substrate is plastic

Application Examples:

THREADLOCKING LOCKING OF THREADED FASTENERS

•Resists vibration.•Single part — clean and easy to apply.•Can be used on all sizes of fasterners - reduces inventory costs.•Seals threads - allows through-hole tapping.

Are the parts already assembled?

Yes

t

Wicked grade Low

Solution 290 222Size of Thread Up to M12 Up to M36Strength Medium LowFunctional Strength on M10 steel fasteners 3hrs 6hrsBreakaway Torque M10 bolts 10Nm 6NmMaximum Temperature Resistance +150°C +150°CPack Sizes: 10ml, 50ml, 250ml 10ml, 50ml, 250mlRecommended Primer 7649 7471

Email Enquiries: admin@hishose.com.au5

E & O.E 2006

MIS

CE

LLAN

EO

US

REF: 88-1107

Are the parts already assembled?

NoWill the fasteners be exposed to heat above 150°C?

No Yes What strength do you require?

Medium High Very High

243 262 277 272Up to M36 Up to M36 Up to M36 Up to M36Medium HIgh Very High High

2 hrs 6 hrs 3 hrs 3 hrs20 Nm 22 Nm 32 Nm 23 Nm

+150°C +150°C +150°C +200°C10ml, 50ml, 250ml 10ml, 50ml, 250ml 50ml, 250ml 50ml

7471 7649 7649 7471

THR

EAD

LOC

KIN

G

Loctite 243Effective on all types of metal threaded fasteners. Prevents loosening on vibrating parts such as pumps, motor mounting bolts, gear boxes or presses. Recommended for use where disassembly with hand tools is required for servicing and where parts are contaminated with oil.

Loctite 262For use on all metal fasteners (including stainless steels and those with protective coatings such as zinc) where regular removal for maintenance is not required. Recommended for permanently locking studs on engine blocks and pump housings.

Loctite 277Very high strength thread-locker with outstanding chemical resistance. Suitable for sealing most refrigerants. May require heat to dismantle.

Loctite 272High temperature thread-locker with good chemical resistance. Suitable for sealing most refrigerants at higher temperatures.

6

MIS

CE

LLA

NE

OU

S

REF: 88-1107

THR

EAD

SEA

LIN

G

Loctite 55Can be safely applied on metal and plastics threaded fittings.

Approved for use with potable water up to 80°C.Plumbing Safety AS/NZS 4020/199 Certificate 8638, Standards Australia for use with potable water systems. Gas – Approved by AGA, Approval Number 6007. Compies to AG208 for max rated working pressure of 2400kPa and temperatures of +150°C.

Loctite 5331Recommended for use on threaded plastic or plastic/metal fittings carrying hot or cold water eg. industrial and agricultural plastic water pipe systems, or drainage systems.

Carries the German DVGW (No.96.07e125) and KTW approvals for gas and potable water. Tested in accordance to EN 751-1.

WRC approved for use with potable water up to 85°C

Handy Hints:• If the sealant (542, 569, 577 or 567) will be applied below 5°C, pre-treat with Loctite Pimer 747 or 7649• All parts must be clean & dry before sealing - use Loctite ODC Free Cleaner.• If the parts have been in contact with washes or cuttingfluidscontainingnitriteswashthemwith hot water1

Application Examples:

THREAD SEALING

•Replaces hemp, tapes and pastes.•Loctite sealants ensure complete contact between threads and provides a 100% seal.•Loctite sealants will not creep, shrink or block systems and filters by shredding.•Diassembly can be achieved easily with normal tools.

Are the parts metal or plastic?

Plastic or combined plastic/metal partsWill the pressure exceed 300kPa?

Yes No

Solution 55 5331Description Cord Curing gelMaximum Thread Size 6" 3"Temperature Resistance +150°C +150°CDisassembly Strength Low LowSubstrate to be Sealed Metal, plastic or both Metal, plastic or bothInstant Low Pressure Seal Yes Yes - up to 50kPaPack Sizes: 80g = 150m cord 100mlRecommended Primer - -

Email Enquiries: admin@hishose.com.au7

E & O.E 2006

MIS

CE

LLAN

EO

US

REF: 88-1107

Loctite 577Recommended for all coarse metal threads. Suitable for applications at low temperatures requiring fast cure, eg. outdoor plant maintenance.

Sydney Water Board Approval Number 95/00043.

Gas; Approved by AGA.Approval Number 4787 to a maximum pressure rating of 2600kPa.

WRC approval for use with potable water.

THR

EAD

SEALIN

G

Loctite 542Recommended for threaded fittings as used in hydraulic and pneumatic installations. Carries the German DVGW approval (No.96.02e125). Tested in accordance to EN 751-1.

Meets BS 6956 type A for sealing gas fittings.

WRC approval for use with potable water.

Loctite 569Recommended for fine threaded fittings as used in hydraulic and pneumatic applications. Approved by the Australian Gas Association, Approval Number 3375 for a maximum pressure rating of 1050kPa.

Loctite 567Recommended for all coarse metal threads where slow cure is required to prolong time frame for adjusting valves and fittings.

Approved by Australian Gas Association, Appproval Number 3207 to maximum pressure rating of 1050kPa.

Are the parts metal or plastic?

Metal parts

Are the threads fine or coarse?

Coarse pipe thread Fine pipe thread Coarse up to 2" pipe thread

542Hydraulic and pneumatic

569Hydraulic and pneumatic

577General Purpose

567Slow Cure

Curing liquid Curing liquid Curing gel Curing gel3/4" 3/4" 3" 3"

+150°C +150°C +150°C +205°CMedium Low / Medium Medium / High Low / Medium

Metal Metal Metal MetalNo No Yes Yes

10ml, 50ml 50ml, 250ml 50ml, 250ml 50ml, 250ml7471 7471 7649 7649

8

MIS

CE

LLA

NE

OU

S

REF: 88-1107

GASKETING SEALING OF FLANGES

•No shimming effect - controlled tolerances, no need for re-torqueing.•Fill all voids - reduce the need for a fine surface finish of flanges•Parts can be disassembled easily even after extended service.•Resists high pressure when fully cured.

Does the existing gasket need to be used as a shim?

GA

SKET

ING

Loctite 518Recommended for use on rigid iron, steel and aluminium flanges eg. aluminium gearbox and engine castings, etc.

Loctite 510Recommended for use on rigid iron, steel and aluminium flanges eg. cast iron components and pump housings, etc. operating at high temperatures. AGA approval number 2590 for a maximum rated pressure of 690kPa.

Handy Hints:• If there are traces of old gasket left on the parts to be sealed, clean with Loctite 790 gas ket remover.• All parts must be clean & dry before sealing - use Loctite ODC Free Cleaner.• Anaerobic products cure between metal sur faces with the absence of air

Application Examples:

Yes

Up to 0.1mm (Anaerobic Sealant)

High temp./chemical resistance

Coat existing gasket No Yes

Solution 515 518 510Gasket Type Formed-in-place Formed-in-place Formed-in-placeFlange Type Rigid Rigid RigidCure Method Anaerobic Anaerobic AnaerobicTack - Free Time N.A. N.A. N.A.Temperature Resistance 150°C 150°C 200°CSeal (low press) 30 mins 30 mins 2 hrsOil Resistance Excellent Excellent ExcellentWater/Glycol Resistance Good Good ExcellentPack Sizes: 50ml, 300ml cartridge 20ml, 50ml, 300ml cartridge 50ml, 250ml tubeRecommended Primer 7649 7649 7471

Loctite 515Recommended for coating and re-using gaskets to improve sealing. Approved by the AGA, Approval Number 2590 for a maximum rated pressure of 690kPa

Email Enquiries: admin@hishose.com.au9

E & O.E 2006

MIS

CE

LLAN

EO

US

REF: 88-11007

Does the existing gasket need to be used as a shim?

NoWhat gap must the sealant fill

More than 0.5 mm (Silicone Sealant)No Temps greater than 200°C Yes

Fast cure?

Yes No

5910 587 5920Formed-in-place Formed-in-place Formed-in-place

Flexible Flexible FlexibleMoisture Moisture Moisture20 min 45 min 30 min200°C 260°C 316°C

20 mins 45 mins 30 minsExcellent Excellent Good

Good Good Good95g 50ml, 300ml cartridge 85g

- - -

GA

SKETIN

G

Loctite 5910Black Maxx SiliconeReplacement for cork and paper cut gaskets on flanges and stamped sheet metal covers. Recommended for use where high vibration or flexing ovvurs. Can also be used with plastic parts. Oxygen sensor safe.

Loctite 587Blue Maxx SiliconeRecommended for sealing all types of flanges including stamped sheet metal where high flexibility and high oil or water glycol resistnace is required. Oxygen sensor safe.

Loctite 5920Copper Maxx SiliconeSingle component RTV non-sag silicone paste for low volatility applications. Adheres to metal, glass natural and synthetic fibres, wood, ceramics, and many plastic substrates. Oxygen sensor safe.

10

MIS

CE

LLA

NE

OU

S

REF: 88-1107

Loctite 401/406Rapid bonding of Santo-prene rubbers, polyolefin plastics and elastomers when used in conjunction with Loctite 770 Polyolefin Primer.

Loctite 454General purpose gel for bonding metals, composite materials, wood, cork, foam, leather, card, paper, plaster and unglazed ceramics.Recommended for use on vertical or overhead surfaces. Fills gaps to 0.5mm with the use of Primer 7452.

Handy Hints:• Toimproveadhesiontodifficult-tobond materials eg. PE, PP, PTFE, or silicone; use Primer 770 in combination with 401, 406, 416, 454 or 480.

Application Examples:

INST

AN

T B

ON

DIN

GINSTANT BONDING

•Fixtures in seconds.•Clear bond line - good cosmetic appearance.•Versatile - dissimilar materials can be bonded.•High strength - often giving a bond stronger than the materials being bonded.•Small parts bonding

Are you bonding "difficult to bond" rubber or plastics?eg. polyethylene, polypropylene, PETE, thermoplastic rubbers

such as silicone

Yes

Yes

If one or more apply

Solution 401/406 454Operating Temperature Up to 80°C Up to 80°CFixture Time1 5-20 secs 5-20 secsViscosity mPa.s 110/20 GelEspecially for Difficultplastics/rubber Porous SubstratesPack Sizes: 25ml, 100ml, 500ml 20g, 200g

1 on steel

Email Enquiries: admin@hishose.com.au11

E & O.E 2006

MIS

CE

LLAN

EO

US

INSTA

NT B

ON

DIN

G

Loctite 480Black, rubber toughened grade for bonding metal to metal and metal to rubber; especially suitable with applications where high peel strength is required and/or shock loads are present.

Loctite 401General purpose for bonding most substrates such as plastics, rubber, metals, card, wood.

Loctite 406Rapid bonding of rubbers (including EPDM), and plastics.

Loctite 416Specially formulated for applications requiring higher viscosity and slower fixturing speeds.

NoDo any of the following apply?

Is the gap over 0.1mm?Do you require a non-drip/non-run product?

NoIs the bond going to be subject to shock or peel loads?

Yes No

480 401 406 416Up to 100°C Up to 80°C Up to 80°C Up to 80°C20-120 secs 5-20 secs 5-20 secs 5-20 secs

300 110 20 1500Metal/Plastics Porous substrates EPDM, Rubber Rough, irregular surfaces

25ml, 500g 25ml, 100ml, 500ml 25ml, 100ml, 500ml 25ml

REF: 88-1107

12

MIS

CE

LLA

NE

OU

STHE BASIC SHAPE OF THIS BALL AND SOCKET DESIGN IS THE KEY TO THE LOC-LINE® SYSTEM.

LOC

-LIN

E

• The tapered skirt design of Loc-Line® allows full articulation of the ball without cutting off any flow as do round skirt designs.

• Loc-Line’s unique ball and socket design is fully hand adjustable in both position and length.

• Bending doesn’t decrease the inside diameter and it won’t kink or fatigue like copper tubing.

• Unlike metal hoses, Loc-Line® won’t damage machine tool cutters if contact occurs.

• Loc-Line® is electrically non-conductive. It is ideal for use as an EDM flushing hose.

• Loc-Line® has no internal positioning rod that can break or restrict fluid flow.

• Repeated positioning is easy and it will stay in position without any springback. Creep due to machine vibration is eliminated

• Loc-Line® is manufactured in a premium grade acetal copolymer material which is chemically resistant to petroleum products, coolants, and most common chemicals. Selected parts are also available in an acid iesistant polyester.

• Loc-Line® continues the original adjustable hose concept by offering four hose diameters, manifolds, valves, and a large choice of nozzles and fittings including the new Modular Vacuum Hose System proving, adjustability only just started with our original concept.

• Loc-Line® is designed for low pressure applica tions. Maximum pressures for the hose systems vary with the length of the hose, the diameter of the selected nozzle, and the bending angles. The following specifications are guidelines for all Loc-Line® coolant hose systems.

LINE PRESSURE & FLOW RATES1/4" System 30-50 PSI 250 Gal / Hour1/2" System 20-30 PSI 478 Gal / Hour3/4” System 10-20 PSI 1,140 Gal / Hour

TEMPERATURE SPECIFICATIONSMelting point: 329° FMaximum operating temperature: l70° F

Please note that all applications have variables and conditions that will affect the maximum hose pressures, testing is always recommended whenever possible.

LOC-LINE® KITS & BULK PACKS

Loc-Line® is offered in kits and bulk packaging to make buying easier. Whatever your demands, there’s a package to fit your needs.

REF: 47-1107

Email Enquiries: admin@hishose.com.au13

E & O.E 2006

MIS

CE

LLAN

EO

US

LOC

-LINE

VACUUM HOSEThe LOC-LINE® 2 1/2 Vacuum Hose is designed to be added to an existing central vacuum system to extract smoke, dust, fumes and particles at the source. It is easy to position within a work area and can be mounted to a 3" thin walled PVC drain pipe or a 3” sheet metal duct.

COMMON COMPATABILITY - ACETAL PRODUCTSLOC-LINE® - BLUE & ORANGE COLORS

Yes AcetoneNo Acids

Yes Alcohol, EthylNo Ammonium Hydroxide, (strong)No Bases, Strong

Yes Commercial Dish DetergentsYes GasolineYes Greases

No Hypochlorite Ion SolutionsYes Lacquer SolventsYes OilsYes Sodium Hydroxide

VACUUM HOSE APPLICATIONS• Soldering

• Wet Grinding.

• Machining applications; especially mist, graphite and particles.

• Chemical odours and fumes (except acids)

• Woodworking.

VACUUM HOSE FEATURESCreate a custom vacuum hose by change the length or the nozzle by popping together the appropriate number of elements and choosing the nozzle hcst suited for your application.

• LOC-LINE® Vacuum Hose is hand adjustable in 3600.

• LOC-LlNE® Vacuum Hose is hand adjustable and is easy to reposition. It’s self-supporting up to 3 feet so it stays where you put it.

• LOC-LINE® Vacuum Hose is durable, will not fray and is resistant to crushing.

• The LOC-LINE® Vacuum Hose is made of a premium grade acetal copolymer and is resistant to most chemicals.

• Tight turns are easy with a bending radius of 5.75”

REF: 47-1107

REF: 47-1107

REF: 47-1107

REF: 47-1107

REF: 47-1107

18

MIS

CE

LLA

NE

OU

SLO

C-L

INE

REF: 47-1107

3/4" SYSTEM • 3/4" INSIDE DIAMETER

Email Enquiries: admin@hishose.com.au19

E & O.E 2006

MIS

CE

LLAN

EO

US

CHEMTOOLS AUTOMOTIVE / INDUSTRIAL PRODUCTSR40 WD FORMULAR40 WD penetrates and lubricates. Loos-ens rusted parts and prevents corrosion. Displaces moisture.Product No. CT-R40-400

R10 PENETRATING OILFrees rusted mechanical parts and pene-trates narrow spaces. Corrosion stopper.Product No. CT-R10-300

R30 DRY LUBRICANT WITH PTFETefton-based powerful dry lubricant. Excellent anti-seize properties which resists high and low temperatures.Product No. CT-R30-300

R44 DEOXOne of the highest quality multi-purpose formulas available. An anti-corrosion lu-bricant which seals and protects against moisture.Product No. CT-R44-400

P28 NICKEL ANTI-FREEZERecommended for use on stainless steel and soft metals where copper is not suitable. Non-hardening formula, non-seperation.Product No. CT-P28-300

R60 SILICONEHigh performance lube primarily de-signed to reduce friction on non-load bearing assemblies. Water displacer and prevents binding. High temperature resistance.Product No. CT-R60-400

SILVER GALUsed extensively in maintenance and restoration of damaged or worn metal. Protects iron/steel structures..Product No. CT-SG-400

COLD GALLiquid cold galvanising is a zinc rich coating. It prevents rust and corrosion in harsh environments providing years of protection.Product No. CT-CG-400

BRAKE CLEANERFast drying solvent which cleans brake pad residue. A powerful solvent which penetrates into moving parts to remove grease and road grime.Product No. CT-BC-500

BELT GRIPIdeal for any equipment containing con-veyor belts. This product remains tacky and prevents belt slipping and maintains belt flexibility.Product No. CT-R12FG-300

TEFLON TAPE/PASTEProduct No:

TT01 12mmx10MrollsTeflonTapeWHITE

LACO 225mlLacoSlictiteTeflonPaste

TT00 12mmx10MrollsTeflonTapePINKPLUMBERS

TT02 12mmx10MrollsTeflonTapeYELLOWGAS

TT02/19 19mmx10MrollsTeflonTapeYELLOWGAS

TT04 12mmx10MrollsTeflonTapeGREENOXYGEN

TT05 12mmx12MrollsTeflonTapeGREYPLUMBERS

CH

EMTO

OLS

REF: 88-1107

TT00 TT02TT01 TT04

ABOVE IS ONLY A SAMPLE RANGE OF STOCKED PRODUCT. ENQUIRE AS PER YOUR REQUIREMENT. OTHER CHEMTOOLS PRODUCTS AVAILABLE ON REQUEST.

CT-R40-400

CT-R10-300

CT-BC-500

TT05