project description strategy & approachedge.rit.edu/content/p13226/public/msd i detailed...
TRANSCRIPT
Project Description
Project Background:
The objective of this project is to design and build a test
stand that will validate the quality of electronic power
steering units for Maval Manufacturing. In 2007 Maval
Manufacturing launched its Wicked Bilt brand focusing on
steering solutions, including electronic power steering
(EPS) for UTVs. The Senior Design team is tasked with
designing and constructing a test stand for the EPS units.
Having a functional steering system is a major aspect of
customer safety so it is important to test all units. As
requested by Maval, we will be running several tests based
on input and output torque relationships. The units will be
serialized and the data will be recorded to a database. If
problems arise in the future, Maval needs to be able to
bring up the test data for any particular unit that has left the
building.
Problem Statement: Validate the quality of electronic power steering units by
creating a test stand to test performance criteria of all
electronic power steering units from Maval Manufacturing.
Objectives/Scope:
1. Validate quality by testing:
1.1. Torsion bar integrity
1.2. Steering current draw
1.3. Torque input and output 1.4. Steering symmetry
2. Record all data
3. Create an easy to use interface
4. Ensure safety of operator
Deliverables: Fully functioning test stand
User manual documentation
Expected Project Benefits: More robust test method of steering units
Ability to store data for manufacturer
Core Team Members: Travis Blais – Team Leader
Evan Lumby – Manufacturing Leader
Jordan Shields – Project Leader
Samuel Slezak – Software Leader
Strategy & Approach
Assumptions & Constraints: 1. Accommodate power steering casting and splines
Issues & Risks: The integration of data acquisition software and hardware
will be the biggest challenge for our senior design team.
o To ensure success we plan on starting creation of software early in the process as well as seek advice
from experts in the field.
Error codes occurring too often may cause operator to alter software to prevent warnings (has happened on other tests at
shop)
o Password Protection of Software o Proper Tolerances to ensure unit quality while also
minimizing error warnings
Spline wear deteriorating piece o Proper material Selection
High Cost of Parts necessary for Testing o Reasonable budget , cost assessment, price comparison
Lead time on manufactured parts o Requests parts and notify shop on time
Designing Intuitive Interface o Physical visit to Maval to speak with operator and
observe process in action and receive feedback
Repeatability of test results due to insufficient strain gauge life.
o Research and Benchmarking Strain Gauge Fatigue Life and Cost comparison to torque sensors available in
market
Inability to read Error Signals
o Conduct research with signals expert along with
detailed research of signals processing, including Morse Code
Creating accurate torque sample range to be read while
maintaining an elastic torque region. o Thorough analysis of connections as well as torque
sensor capability and signal generation.
Inability to find testing area that supplies 3-phase power supply.
o Option 1:
The Senior Design Facilities will be wired for the
capability of supporting 220V, 3-Phase power. The
Cost will be covered as a Facilities fee by RIT. The
testing of the stand will be completed in the Senior
Design Meeting Room.
o Option 2:
The Test Stand will have castors attached to the
structure, regardless of the availability of power,
for the assembly and testing process. These castors
will most likely be removed once the stand is
delivered to Maval. This will provide portability of
the test stand and allow the team to transport it to
the second floor engineering machine shop, which
has 3-phase power available. Due to space
limitations, the stand cannot remain in the machine
shop, and must be returned to the Senior Design
Meeting Room.
Customer Needs:
Primary
Customer
Need
# Specific Customer Needs
Ensure Safety
S1 E-stop
S2 Safe to use
S3 Secure EPS
Validate
Quality
Q1 Repeatable Measurements
Q2 Display Errors
Q3 Measure/Apply Torque In
Q4 Measure Torque Out
Q5 Measure Supplied Current
Q6 Check sensor calibration
Q7 Password protect specifications
Q8 Two test fixutres
Easy to use
E1 Red/Green light for fail/pass
E2 Failure criteria clearly expressed to user
E3 User friendly interface
E4 Automated test
E5 Tool-less to secure EPS
E6 Easily adjustable specifications
E7 Low skill level to use
E8 Easy to replace high wear parts
Record Data
R1 Record Torque In
R2 Record Torque Out
R3 Record Current
R4 Record Errors
R5 Keep database of all test data
R6 Record Max torque
R7 Record Calibration
R8 Record operator ID
Serialize Parts P1 Assign new internal serial number
P2 Record internal/external serial number with test data
Engineering Specifications:
Engineering
Specification
Number
Engineering Specification Description Units of
Measure
Preferred
Direction
Nominal
Value
Method of
Validation
Customer
Need
S1 Button to turn off power to actuation device and EPS yes/no - yes - S1,S2
S2 EPS Current limit Amperes Range 30-40 Fuse/device limits S2
S3 Area of exposed wire/connections m2 Exact 0 - S2
S4 Maximum applied torque in Nm Increase 9 motor capability Q3, R6
S5 Maximum measurable torque out Nm Increase 67.5 sensor capability Q4, R2, R6
S6 Maximum measureable torque in Nm Increase 9 sensor capability Q3, R1
S7 Voltage supplied to EPS control unit V Range 12-13.5 measure E4
S8 Max measureable current Amperes Increase 30 sensor capability Q5, R3
S9 Allowable EPS movement during test degrees Decrease 5 measure S3
S10 Number of test fixutres Exact - 2 - Q8
S11 Accuracy of measured torque % Decrease 5 sensor capability Q1
S12 Calibration Accuracy Nm Decrease 1 measure Q1, Q6, R7
S13 Tolerance on current measurement % Decrease 5 sensor capability Q1
S14 Time to secure minutes Decrease 1 survey E5
S15 Number of steps to start test stand from off # Less 5 - E7
S16 Use tools to secure yes/no - no - E5
S17 Display errors on screen yes/no - yes - E2, E3
S18 Illuminates green/red light for pass/fail yes/no - yes - E1, E3
S19 Time to remove spline connection Minutes Decrease 5 - E8
S20 Steps to run test # Decrease 7 - E4, E7
S21 Password Protected yes/no - yes - Q7, E3
S22 Display modifiable specifications yes/no - yes - E3, E6
S23 Min number of tests stored # Increase 30000 - R1-7
S24 Minimum DAQ sample rate Samples/sec Increase 50 sensor capability Q1,3,4,5
S25 Storable alphanuemeric characters for serialization # Increase 20 - P1,P2
S26 Storable digits for operator ID # Increase 10 - R8
Test Bench Concept Selection:
The above images show our initial concepts that we used for conversation as a group to pick apart
the aspects we did and did not like to we could approach our customer with our best concept for the
layout of the test stand. As a group we decided the picture shown to the right would be the best to take to
Maval along with the other concepts.
When meeting with Maval we improved on the concept yet
again by following their suggestions.
o Minimize horizontal surface to discourage clutter
o Remove additional components
o Start/Stop buttons
o Indicator light
o Reverse torque application so servos will be located
under the work surface
o Create storage area to accommodate for computer and
hardware
o Mount screen elsewhere, not sitting on a surface.
o Open up work area so it is easier to move parts in and
out of the fixture
Once these considerations were gathered, a much better concept was generated that can be met
with further approval from our customer.
After continued discussion and consideration for space to allow the user to sit comfortably at the
test stand, we decided to make the stand 12 inches wider to allow us to fit all of our electronics inside of
one locker that can be bought and attached to the underside of the stand. This extra table space will also
accommodate the label printer. We believe this will be our last major change to the layout.
Torque Application:
Servo: Anaheim Automation EMG-10:
- Rated torque of 677 oz-in (4.78Nm) continuous
- Repeatable 2031 oz-in (14.34Nm)
- Compatible with Anaheim Automation drives
Servo Drive: Anaheim Automation EDB-10AMA
- Torque control
- Speed Reference
Torque Sensor Fatigue and Max Stress Capability:
Torque Sensor Free Body Diagram
. Below are the calculations used to find the estimated expected stress.
Based on the Equations and coefficients in above from Futek, the 1300 in-lb Torque Sensor
selected for this project is limited to 15,000 psi for Maximum Stress. These calculations imply
that for the worst case scenario estimated for this application, the torque sensor chosen should
theoretically support infinite fatigue life for fully reversing loads, while including a factor of
safety of greater than 2.
Slip Shaft Design:
Outline of Slip Shaft Solid Model of Slip Shaft
Using ANSYS APDL Software, The Slip Shaft was designed based on a 3/4in DD Steering Shaft
and Tube combination. Both the Tube (OD 1in) and the shaft (OD .75in) were 6 inches long,
with a 3 inch overlap.
Results
The Slip Shaft experiences less than 12000 psi maximum stress under the max specified torque
of 67.5 N-m
The Maximum Stress occurs on the DD Shaft, pictured above.
An end view detailing the radial stress experienced by the Slip Shaft.
Using the Maximum Yield Stress of 1016 cold drawn Steel, the Shaft has an ultimate yield
strength of 50800 psi, providing an approximate factor of safety of 4.2.
Servo Key Analysis:
Shigley’s Mechanical Engineering Design, Ninth Edition, by Richard G. Budynas and J. Keith Nisbett
r = 11mm
t = 8mm
u = 4mm
h = 7mm
L = 40mm
T = 9Nm
Shear Failure:
Resist “crushing”:
u
F
F h
Data Acquisition:
cDAQ-9174 Chassis:
Features:
- USB Interface
- 4-Slot Chassis
- Compatible with over 50 modules
NI–9219 Universal Analog Input:
Features:
- 4 Channel Input module
- Built in quarter, half, and full bridge support
- Built in voltage and current excitation
- 250 Vrms channel to channel isolation
- 100 S/s/ch
Signals:
(1) Torque Sensor (2mV/V Excitation)
(2) Torque Sensor (2mV/V Excitation)
(3) EPS Error Signal (0-12V Pulse)
(4) Current Measurement (0-60mV)
NI-9264 16-Channel Analog Output Module:
Features:
- ± 10v Output
- 4mA/ch, 16mA total Current drive
- 25kS/s
- 0.01V Accuracy
Signals:
Signals duplicated on each side for a total of 10 used output channels, one side is listed:
(1) EPS Remote (0-10V, < 0.01A)
(2) EPS Main Power Relay (0-10V, 1.6mA)
(3) Speed Reference (-10V to 10V)
(4) Torque Reference (-10V to 10V)
(5) Servo Remote (0-5V, 2.2mA)
FUTEK FSH00648 Reaction Torque Sensor:
Features:
- 1300 in-lb (147Nm) rated load
- 1 to 18V Excitation
- 2mV/V Max output
- 150% Safe overload
Bill of Materials:
Product Number Vendor Product Descriptions Quantity Price/Unit Row Total
LabVIEW Full ViewPoint Systems LabVIEW Full 1 $2,699.00 $2,699.00
PKG-EMG10-EDB10-CBLS Anaheim Automation Servo, Drive, and Cables 2 $1,053.00 $2,106.00
NI 9219 ViewPoint Systems DAQ Input Module 1 $1,059.00 $1,059.00
FSH00648 Futek Torque Sensor 2 $495.00 $990.00
NI 9264 ViewPoint Systems DAQ Output Module 1 $926.00 $926.00
cDAQ 9174 ViewPoint Systems DAQ Chassis 1 $699.00 $699.00
Tripp Lite 40A Amazon AC to DC Convertor 1 $198.99 $198.99
CC1039-ND Digi-Key EPS Main Power Relay 2 $77.32 $154.64
N82E16824016172 Newegg Monitor 1 $126.00 $126.00
T9YB656290 Global Industrial Electronic Equipment Cabinet 1 $102.95 $102.95
CC1126-ND Digi-Key Servo alarm and remote relay 4 $18.73 $74.92
SPLT-RB Parts Expressed Wire quick connectors 10 $6.87 $68.70
4514k2 McMaster-Carr Circuit breaker 1 $58.74 $58.74
55C4473 Newark E-Stop button 2 $27.53 $55.06
4854 Monoprice Monitor Adjustment 1 $19.73 $19.73
TGHGCR0020FE-ND Digi-Key Current measurement resistor 1 $30.07 $30.07
FSH00037 Futek Torque sensor cable 1 $30.00 $30.00
NI 9904 ViewPoint Systems DAQ Mounting 1 $30.00 $30.00
HS172 Digi-Key EPS Main Power Relay Heat Sink 1 $17.64 $17.64
7587K921 McMaster-Carr 10 AWG Wire 1 $19.25 $19.25
7587K258 McMaster-Carr 24 AWG Wire 2 $9.29 $18.58
Vostro Small Form Factor Dell Computer 1 $469.00 $469.00
- Estimate Scanner 1 $300.00 $300.00
- Estimate Printer 1 $100.00 $100.00
- Estimate Table Materials 1 $350.00 $350.00
$10,703.27