profile email
TRANSCRIPT
CONTENTS
FIRM DETAILS1.< Company Information
< Scope of Services
THE ORGANIZATION2.
<
< Quality Policy
< HSE Policy
< Organogram
< Key Personnel
< ISO Certification
< Empanelment
< Project Experience
< Client List
About Us
< Vision, Mission & Values
< Geotechnical Investigation
< Quality Control & Quality Assurance (QC&QA)
· Soil & Rock Testing
· Material Testing
· Bitumen Testing
· Non-destructive Testing (NDT)
< Environmental
· Water Quality Analysis
· Air Quality Monitoring & Analysis
< Survey
· Topographic Survey
· Hydrographic Survey
· GPS Survey
· GIS
· Traffic Survey
LABORATORY & SURVEY3.
CONSULTANCY4.
· Design Consultancy
· Project Management Consultancy (PMC)
· Environmental Engineering & Protection
· Project Facilitation
< Sectors
· Architecture, Structural & Town Planning
· Infrastructure & Telecommunication
· Highways, Railways & Bridges
· Power & Energy
· Chemical & Industrial
· Mining, Minerals and Metallurgical
· Construction
· Environmental Monitoring & Analysis
< Services
Company Information
NAME:
ADDRESS Regd. Office:-
Email Address : [email protected], [email protected]
Contact Persons: DEEPAK KUMAR MALLICK (Founder & CEO) B.Tech (H), Civil - IIT Kharagpur Mob: +91-
Telephone No : + 91- 674 - 0674-2360019, 3199991
Fax No : + 91- 674 -
Website : www.idaxconsulting.com, www.idaxlab.com
IDAX CONSULTING & RESEARCH GROUP
C-103, Jyotshna Enclave, Jaydev Vihar, Near Mayfair Hotel,
Bhubaneswar-751012, Odisha, INDIA.
9937061009 / 9338709009e-mail: [email protected]
ALOK KUMAR MALLIK(Project Manager)MS - IISER Kolkata Mob: +91- 9338558778e-mail: [email protected]
2360019
FIRM DETAILS
Scope of Services
ROLE OF IDAX
CONSULTANCY SERVICES OFFERED
CONSULTANCY SERVICES OFFERED IN THE FOLLOWING SECTORS
· Principal Consultant· Detailed Engineering Consultant· Project Management Consultant· Sub Consultant To PMC
· Preliminary Planning And Site Development Studies, Survey, Soil Investigation.· Feasibility Reports / Detailed Project Reports, Estimates.· Concept Design, Architectural Design, Structural Detail Engineering, Landscaping, Town
Planning, Residential, Commercial Complexes.· Procurement Support Services:
§ Enquiry Specification.§ Review & Evaluation.§ Recommendation For Selection Of Contractors For Field Services.§ Purchase Recommendation For Selection Of Vendors.
· Detailed Engineering For Civil, Mechanical And Electrical Works.· Project Management Services & Co-odination.· Inspection & Expediting.· Site Services – Construction Supervision, Erection, Start-up And Commissioning.· Turnkey Projects.· Survey, Geo-technical Investigation, Material Testing.· Environmental Engineering & Protection.
· Architectural, Structural, Urban Planning, Township, Landscaping· Highway, Railway & Bridge Engineering· Water, Sewerage, Hydraulics, Public Health Engineering· Chemical, Industrial & Power Plants, Material Handling, Boiler, Piping, Conveyor, Steel Structures,
Gantry Girder, Rails· Mining, Minerals & Metallurgy· Topographic, Hydrographic & GPS Survey· Geo-technical Investigation, Material Testing· Non-destructive Testing (NDT), Pile Integrity Testing, Pile Load Testing, Ground Penetrating Radar· Environmental Monitoring & Analysis· Project Facilitating
FIRM DETAILS
About Us
IDAX CONSULTING & RESEARCH GROUP
CONSULTING & RESEARCH GROUP
was established in the year 2010 at Bhubaneswar, Odisha,
India. IDAX is the brain child of Er. Deepak Kumar Mallick, a B.Tech(H) in Civil Engineering from IIT
Kharagpur and has a huge experience in the field of Consulting & Construction of Mega Infrastructure
Projects. He has worked in various prestigious companies such as Tata Consulting Engineers Ltd.
(TCE) and ILFS Water Ltd. (IWL). IDAX is a leading multi-
disciplinary consulting firm providing a diverse range of services in the field of Civil Engineering,
Mechanical Engineering, Electrical Engineering & Environmental Engineering such as Geo-technical
Investigation, Quality Control & Quality Assurance, Non-Destructive Testing (NDT), Pile Load Testing,
Pile Integrity Testing (PIT), Ground Penetrating Radar (GPR), Leak Noise Correlator, Survey, GIS,
Environmental Engineering & Protection, Project Management & Supervision, Architectural & Structural
Design & Drawings, Topographic Survey, Hydrographic Survey, GPS Survey, Soil, Rock, Bitumen,
Concrete, Steel Testing & all types of Material Testing, Chemical Analysis, Water Analysis, Ambient Air
Quality Monitoring, etc. It also provides services to Roads, Highways, Railways, Water Supply &
Sanitation, Industrial, Chemical, Power, Energy, Oil&Gas, Mining, Mineral, Metallurgy, Construction
and Environmental Sectors. The highly qualified & experienced technical personnel from different
activities like Geo-technical Engineers, Civil Engineers, Mechanical Engineers, Environmental
Engineers, Scientists, Chemists, Structural Designers, Architects have joined in the company.
We have a well-equipped Ultra Modern Quality Control Laboratory with latest infrastructures, which is
supported by highly advanced equipments, computers and softwares to carry out Civil, Mechanical,
Electrical & Environmental Work. Our Success is the result of working diligently as a team to do each job
“Our approach is uniform: uncompromising quality, commitment to
client satisfaction and personal attention to relationships
with everyone we work with.”
THE ORGANIZATION
team work and coordination among our employees and our clients.
Our commitment is to provide outstanding services to our clients.
IDAX is an equal opportunity organization.
is an ISO 9001:2008
certified company.
IDAX CONSULTING & RESEARCH GROUP
Vision, Mission & Values
To be an internationally respected Consulting & Quality Control Laboratory firm committed to quality,
time, customer satisfaction and continuous improvement.
To build a strong future ensuring sustained revenue growth and improve market position.
To adopt latest technologies in the field of construction of infrastructure projects to achieve the highest
possible standards.
To encourage innovation, professional integrity, upgradation of knowledge and skills of employees,
maintain a safe and healthy working environment.
To be responsible and sensitive to the country, communities and environment.
• Trust , Commitment & Loyalty
• Ethics & Integrity
• Unity
• Discipline
• Innovation & Excellence
• Responsibility to Society
THE ORGANIZATION
Vision
Mission
Values
THE ORGANIZATION
Quality Policy
Health, Safety & Environment
IDAX
IDAX
IDAX
CONSULTING & RESEARCH GROUP is committed to continually improving our performance related
to Health, Safety and Environment (HSE).
CONSULTING & RESEARCH GROUP will ensure that:
= Safe and Healthy environment is provided to all its employees at their work places.
= Safe work practices are observed at all project sites that it is associated with.
= Environment friendly practices are adopted in meeting its own needs.
= Where relevant, environment friendly solutions are advocated to its customers.
= Health, Safety and Environment hazards are proactively identified and risks are assessed
and controlled.
= Employees are trained to perform their work in a safe and environmentally responsible manner.
= CONSULTING & RESEARCH GROUP will implement this policy incompliance with all applicable
Health, Safety and Environment codes and standards as well as legal and statutory requirements.
THE ORGANIZATION
Organogram
THE ORGANIZATION
CHIEF EXECUTIVE OFFICER(CEO)
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
ADVISORY GROUP COMPANY SECRETARY
DIRECTORS, EXECUTIVE DIRECTORS
TECHNICAL DIVISION CORPORATE SUPPORT
AR
CH
ITE
CT
UR
E &
ST
RU
CT
UR
AL
DIV
ISIO
N
HIG
HW
AY
& R
AIL
WA
Y D
IVIS
ION
COMMERCIAL DIVISION
FINANCEDIVISION
HRDIVISION
¯ ¯ ¯ ¯ ¯ ¯ ¯
BU
SIN
ES
S D
EV
EL
OP
ME
NT
PU
BL
IC R
EL
AT
ION
& L
IAIS
ON
ING
CO
RP
OR
AT
E F
INA
NC
E
AC
CO
UN
TS
HU
MA
N R
ES
OU
RC
E D
IVIS
ION
AD
MIN
IST
RA
TIO
N
IT D
IVIS
ION
MANAGEMENT PROFESSIONALS
PRINCIPAL DESIGN PROFESSIONALS
DESIGN PROFESSIONALS
SUB PROFESSIONALS
SUPPORT STAFF
MANAGEMENT PROFESSIONALS
SENIOR MANAGERS
MANAGERS
ASSISTANT MANAGERS
SUPPORT STAFF
¯
INF
RA
ST
RU
CT
UR
E
D
IVIS
ION
IND
US
TR
IAL
DIV
ISIO
N
EN
VIR
ON
ME
NTA
L D
IVIS
ION
WA
TE
R R
ES
OU
RC
ES
DIV
ISIO
N
CO
NS
TR
UC
TIO
N D
IVIS
ION
LA
BO
RA
TO
RY
DIV
ISIO
N
SU
RV
EY
DIV
ISIO
N
TE
ND
ER
ING
& P
RO
CU
RE
ME
NT
DIV
ISIO
N
Deepak Kumar Mallick (Founder & CEO)
B.Tech (H), Civil Engineering – IIT Kharagpur
Mr. Deepak Kumar Mallick, the Founder and Chief Executive Officer of
GROUP a Gold Medallist in Mathematics and B.Tech (Hons.) in Civil Engineering from Indian Institute of
Technology (IIT) Kharagpur. He has huge experience in Detail Engineering, Project Report, Feasibility
Report, Tendering, Construction, Turnkey Projects, Contracting, Project Management, Quality Control,
Environmental Engineering, Public Health Engineering, Water Supply and Waste Water Engineering.
He was a part of IL&FS Water Ltd. team to execute the water supply system for Indian Oil Corporation
(IOCL) on a Build-Own-Operate-Transfer (BOOT) basis. The project involves transportation of 100 MLD
water over a distance of about 93 Km from Mahanadi River at Cuttack to Paradip for the IOCL Paradip
Refinery Project. Prior to IL&FS he was working with TATA Consulting Engineers Ltd. (TCE). During his
association with TCE, the experience was mainly involved in assignments on infrastructure
development projects in India, funded by many international funding agencies like Japan Bank for
International Co-operation (JBIC), Japan International Co-operation Agency (JICA), Asian
Development Bank (ADB) and World Bank. He has worked in mega infrastructure projects like
Bangalore Water Supply and Sewerage Project Stage-IV, Phase-II (BWSSP-II) funded by JBIC/JICA
and Urban water Supply and Environmental Improvement Project, Madhya Pradesh (UWSEIP-MP)
funded by ADB.
Beyond his works, he has deep interest in Research & Development. He has attended numerous
research papers presented in international seminars. He has contributed two valuable technical papers
to TCE Journal “Water Demand and Supply Management for Bangalore City” and “Sewer
Rehabilitation / Replacement for RCC pipes with Internal Lining”.
Mr. Mallick has passion for infrastructure development and believes that quality infrastructure is the
primary factor in Economic Growth & Nation Making. His vision is to Develop Capabilities, Sound
Technology and Human Resources, T
. IDAX, the brain child of Mr. Mallick was started in the year 2010 as a small proprietor firm and
due to his Leadership, Passion, Hard Work and Discipline has grown to a big corporate
CONSULTING & RESEARCH GROUP, one of the finest Quality Control Laboratory & Consultancy firm in
INDIA.
IDAX
IDAX
CONSULTING & RESEARCH
eam Work and Co-ordination among our Employees and our
Clients
Our commitment is to provide Outstanding, Cost-effective & Time-bound services to our
THE ORGANIZATION
Key Personnel
Founder & CEO
THE ORGANIZATION
Key Personnel
Technical Group
THE ORGANIZATION
ISO Certification
Empanelment
THE ORGANIZATION
<
<
DISTRICT INDUSTRIES CENTER (DIC), BHUBANESWAR (DIRECTORATE OF INDUSTRIES)
RESEARCH DEVELOPMENT & QUALITY PROMOTION (R&B) GOVT. OF ODISHA
THE ORGANIZATION
Project Experience
THE ORGANIZATION
THE ORGANIZATION
Client List
LABORATORY & SURVEY
Geotechnical Investigation
Sub- Soil Exploration, Testing of all Soil & Materials, Non-Destructive Testing for all types of structures, Pile Load Testing, Plate Load Testing, Pile Integrity Test (PIT) and Ground Penetrating Radar (GPR).
Sub-Soil Exploration.
Geo-technical Investigation is primary requirement for Civil Engineering Structures. The planning of
structure and subsequent design and implementation is dependent on sound investigation of founding
strata. Another important aspect during construction is the quality of execution & post construction
maintenance. There are sufficient experienced personnel for supervising tests, data interpretation &
analysis. The company has also the expertise in the field of consultancy in rehabilitation of structures.
Necessary equipments and tools for evaluation of structures are available with the company. The
company has full fledged laboratories, besides this as per necessity & demand, field laboratories at
many sites are also under operation to conduct quality control tests. We have expertise in installation of
Piezometers and conducting Electric Resistivity Test (ERT) for Soil & Ground Water Table. Foundations
(Pile Foundation, open Excavation, Mat Foundation, etc.) design and recommendations are given for
various structures in types of projects.IDAX is having expertise in providing services for Ground Penetrating Radar (GPR) and interpreting the
data to assess the under ground utilities and soil profile without excavating the earth. We are also
providing other cutting-edge technology services like Pile Integrity Test (PIT) for Piles.
LABORATORY & SURVEY
STANDARD PENETRATION TEST (SPT) APPARATUS
Ground Penetrating Radar (GPR) Output
LABORATORY & SURVEY
Quality Control & Quality Assurance (QC&QA)
Our Quality Control Laboratory is equipped with automatic computerized machines which gives
accurate results. All the equipments have their software which transform data into computers and
provide comprehensive results and graphs for analysis. All tests are conducted in accordance with
various IS Codes, ASTM Codes, BS Codes and other relevant codes.
We have facility to test following materials.
Soil & Rock, Concrete, Cement, Flyash / Pozzolana, Aggregates, Bricks, Steel (Reinforcement &
Structural), % elongation, Young’s Modulus, Yield Strength, Total Strength, Hardness, Bend, Rebend,
GGBS (Ground Granulated Blast Furnace Slag), Lime, Tiles, Water, Bitumen, Plasticizer, Concrete
Curing Compound, Aluminum Section, Bentonite, Timber / Wood, Ply board ,Solid Block / Hollow Block /
Paver Block, Special engineering, materials (on request of client) , Mix Design, Grain size analysis,
Hydrometer analysis, Atterberg's Limit, Triaxial shear test (Digitriaxial), Unconfined compression test,
Consolidation test (Digitalized), Permeability test (Constant and variable head), Standard and modified
compaction test.
Aggregate Compaction Apparatus
Air Entrainment Meter Automatic Bitumen Compaction Apparatus
Automatic Soil Compation Beam Flexture Apparatus Benkelman Beam Apparatus
LABORATORY & SURVEY
Quality Control & Quality Assurance (QC&QA)
CBR test- (Soak and Un-soak ), Density, Moisture content, Specific gravity test, Shrinkage limits, Direct
shear test, Laboratory Vane Shear Test, Swell index and swell pressure tests, Chemical analysis of soil,
Plate load test, pile load test, concrete core test, Uniaxial Compression Test, Modulus of Elasticity,
Tensile Strength, Hardness, concrete (Fresh)- Density, Bleeding, Workability Test, Slump / Flow value,
Compacting Factor, Concrete (Hardened)- Mix design (NS,HSC,HPC,DLC,HVFA), Compressive
strength, Tensile strength, Flexural strength, Cement content, Shrinkage & Moisture Movement,
Cement- Fineness (By Sieving), Specific Surface (By Blaine's Permeability Method), Consistency,
Setting Time (Initial & Final), Soundness, Specific Gravity, Heat of Hydration, Drying Shrinkage,
Compressive Strength, Tensile Strength, Flexural Strength, Chemical analysis.
Aggregates (Coarse)- Gradation (Sieving), Water absorption, Specific Gravity, Flakiness and
Elongation Index, Impact value, Crushing value, Soundness, Silt Content, Deleterious Materials (Clay,
Silt, Coal & Lignite, Soft Materials), Ten percent fine value, Alkali aggregate reactivity, Abrasion value,
Angularity Numbers, Stripping Value, Chemical Analysis, Aggregates (Fine)- Grain size analysis,
Specific gravity, Soundness, Fineness modulus, Silt content, Water absorption, Specific Gravity, Silt
Content, Deleterious Materials (Clay, Silt, Coal & Lignite, Soft Materials), Alkali aggregate reactivity,
Mica content, Chemical Analysis, Bricks- Water Absorption, Efflorescence, Dimensions, Compressive
Strength, Flexural Strength, Resistance to Wear.
Bitumen Ductility Apparatus Bitumen Extractor
Core Cutting Machine Cube Vibrating Table Digital Curing Tank
Vibrating Machine & Compaction Factor Apparatus
LABORATORY & SURVEY
Quality Control & Quality Assurance (QC&QA)
Steel (Reinforcement & Structural)- Tensile Test (% Elongation, Yield Strength, Total Strength,
Modulus of Elasticity), Band Test, Reband Test, Impact Test, Hardness Test, Brinell Hardness Test,
Bonding Strength, Compression Test, Chemical Analysis, GGBS (Ground Granulated Blast Furnace
Slag)- Specific Surface (By Blaine's Permeability Method), Soundness, Setting Time (Initial & Final),
Compressive Strength, Moisture Content, Chemical Analysis.
Lime- Fineness, Residue on Slaking, Compressive Strength, Soundness, Volume Yield of Quick Lime,
Setting Time (Initial & Final), Free Moisture Content, Popping & Pitting, Workability Bumps, Transverse,
strength, Chemical Analysis, Bitumen- Specific gravity, Flash Point, Fire Point, Softening point,
Penetration test, Ductility, Loss on heating by thin film oven, Viscosity (Kinametic & Absolute), Water
Content by Dean & Stark apparatus, Matter soluble in trichloroethylene, Concrete Curing Compound-
Reflectance Test, Drying time, Water retention test, Bentonite- Swell index, Marsh cone viscosity,
Slurry density, Liquid limit, Sand content, Moisture content, Fineness, Chemical analysis, Timber /
Wood- Timer, Moisture content, Specific gravity, Compression test, Tension test, Nail & Screw holding
test, Impact test, Torsion test, Ply Board- Glue shear strength, Fire resistance, Adhesion test, Water
resistance, Moisture absorption, Mix design- Mix design of concrete, Mix design of dry lean concrete,
Mix design of PQC, Mix design for wet mix macadam, Mix design for granular sub base, Asphalt
concrete mix design by Marshall stability method.
Digital Hot Air Oven Digital Water Bath Electronic Balace
Electronic CBR Test Apparatus
Electronic Consolidation Meter
Electronic CTM for Cube Test
LABORATORY & SURVEY
Quality Control & Quality Assurance (QC&QA)
LABORATORY & SURVEY
Quality Control & Quality Assurance (QC&QA)
Non-destructive Testing (NDT)
We provide complete range of Non-destructive Testing (NDT) for all types of structures with all new
sophisticated machines having microprocessor controller and computerized models which gives the
most accurate data in best represent able manner. IDAX has the following NDT facilities available4
4 Digital Concrete Rebound Hammer4 Corrosion Analyser4 Ultrasonic Pulse Velocity (UPV) Meter4 Ultrasonic Testing (UT) & Radiography Testing (RT) for Metals & Welded Structures4 Rebar / Profometer for Concrete Scanning4 Concrete Core Cutting4 Pile Integrity Testing (PIT) 4 Plate Load Testing & Pile Load Testing4 Ground Penetrating Radar (GPR)
LABORATORY & SURVEY
Environmental
Water Quality Analysis.
Analysing and monitoring various environmental parameters, third party hazardous audit, REIA/EMP, Operation of ETP and chemical testing of metal, minerals, water, waste water, industrial effluent, river pollution, hazardous and Non-hazardous waste, solid waste, etc. We do Ambient Air Quality (AAQ) Analysis for all types of industries. The testing parameters are PH, Electrical Conductivity, Color, Odour, Chloride, Sulphate, Sulphite, Calcium, Magnesium, Phosphate, Nitrate, Nitrite, Total Hardness, Acidity, Alkalinity, Iron, Chemical Oxygen Demand, Bio Chemical Oxygen Demand, Floride, Silica, Total Dissolved Solids, Total Suspended, Matter, Organic Matter, Inorganic Matter, Carbonates, Bicarbonates, Cations, Anions, Metals, Non-metals, Heavy Metals, etc.
Analysing and monitoring various environmental parameters of air various industries. We do Ambient Air Quality (AAQ) Analysis for all types of industries. The testing parameters are Ambient Air Quality monitoring as per pollution control board norms we do SPM 2.5,10, SOx, NOx and other gaseous parameters.
Air Quality Monitoring & Analysis
LABORATORY & SURVEY
Topographic Survey
We do Hydrographic survey for ports, harbours, jetty, marine survey and all types of offshore survey for
all types of industries especially for energy and petrochemical industries. IDAX is well equipped with all
types of latest instruments and trained personnel for Hydrographic survey.
Hydrographic Survey
Topographic survey is the basic requirement of planning of any civil engineering structure. The firm has
acquired all latest Total Station & Auto Level survey equipments with high precision level with software
interface for analysis and competent personnel for analysis and interpretation.
LABORATORY & SURVEY
GPS Survey
In the modern world GPS survey is essential for faster work and accurate survey especially for critical
project zones. IDAX has sophisticated GPS survey machines for conducting GPS survey in any location
and has enough technical personnel to execute the work in time.
Geographic Information Systems is vital for execution of any project. IDAX has experience in providing
solution for GIS related works. We have technical personnel who are having excellent knowledge in
latest software i.e ArcGIS and other software.
Traffic Survey
Due to rapid urbanization the traffic control is a major problem in the developing cities. IDAX has
competent personnel and instruments for analysis and interpretation of traffic survey.
Services
Design Consultancy
IDAX operates in multiple roles:
Lender's engineer
Owner's consultant
Sub consultant to PMC
Detailed engineering consultant
Project Management onsultant
The range of IDAX services covers the entire gamut of project
engineering from inception to project commissioning, and turnkey
design, supply and installation of IDAX engineered equipment.
Our scope of services cover:
Pre-project activities
Design engineering
Procurement assistance
Project management and co-ordination
Inspection and expediting
Construction supervision
Commissioning support
Pre-project activities
Site assessment and surveys
Environment impact assessment
Preliminary planning
Evaluation of technologies
System studies
Feasibility and detailed project reports
Design engineering
Basic studies/engineering
Design calculations and drawings
Enquiry specifications
Technical bid analysis
Vendor drawing review
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
CONSULTANCY
Services
CONSULTANCY
Procurement assistance
Vendor prequalification
Issuing enquiries and receiving offers
Commercial bid evaluation
Purchase recommendation
Purchase order preparation
Project management and coordination
Project planning, scheduling and control
Budgetary and cost control
Communication management
Interface co-ordination
Contract administration
Liaison with statutory authorities
Inspection and expediting
Vendor appraisal
Stage-wise inspection
Final inspection
Expediting deliveries
Construction supervision
Planning of field activities
Scheduling, monitoring and control of field activities
Supervision
Certification
Safety
Site coordination
Commissioning support
Start-up and commissioning assistance
Site performance tests
O & M manual preparation
As-built documentation
Training of owner's personnel
Trouble shooting
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Design Consultancy
Project Management Consultancy (PMC)
Supervision of all types of projects by senior experienced personnel.
Project Management Consultancy services for Housing Complex,
IT Park, Hospitals.
Apartments, Buildings, Hotels,
CONSULTANCY
Services
CONSULTANCY
Environmental Engineering & Protection
IDAX CONSULTING & RESEARCH GROUP is a professionally managed quality conscious organization which provides Techno-environmental solutions to various industrial organizations with sustainable growth and environmental friendly ecosystem. It is a competent technical organization providing environmental solutions with latest technical knowhow, legal advice, liaisoning with various authorities and community at large. IDAX has a distinct track record in the field of liaisoning with local public in order to carry out public hearing jobs for different steel plants to their utmost satisfaction. Our Internal resources and technical acumen blended with highest degree of Public Relationship has been our strength in providing a total solution for Environmental aspects of Mines and Industries.
The technical team of IDAX has wide experience in design,
engineering, erection & commissioning of various pollution control
devices. Carrying out statutory audits, drawing of water pipeline,
water and Air Quality modeling, mine plans, designing of Intake well
and other technical assignment for various industries.
Our laboratory is ISO 9001:2008 certified for its complete
operations. Our laboratory having ultramodern facilities for
Environmental Monitoring, Quality Testing for minerals,
engineering materials, coal, coke and petroleum products. IDAX is
also deeply involved in Hazardous Waste Audits and Water
Harvesting Projects etc.
Our aim is to provide solutions for sustainable development for the
growth of Industries, a one stop service provider for all types of
Industries / Mines related projects, particularly relating to
environmental issue.
Services
CONSULTANCY
Environmental Engineering & Protection
Services
Environmental Services:· Environment Impact Assessment.· Environmental Management Plan.· Pollution Prevention & Control (Design, Installation &
Maintenance of ETPs, Air pollution Control Equipment).· Preparation of Comprehensive EMP mitigation measures,
advising on air pollution control, Waste Water Treatment.· Solid Waste Management (Vermin-technology &
Bio-Technology) Industrial Waste, Urban Waste.· Environmental Monitoring & Survey.· Greenery Management (Plantation, Maintenance, nursery
raising & Sailing of seedling).· Watershed Management.· Liaisoning with OSPCB, CPCB & MOEF.· Environment Auditing, Energy Auditing, Assessing the
performance of environmental systems, environmental
liabilities.· Bio-medical Waste Management.· Third party Hazardous Waste Audit.· Environmental Monitoring (Air, water, Soil).· Laboratory testing of different samples in Laboratory.
Marine Environment Assessment & Management:Environmental Impact Assessment of various hazardous materials
generated due to ship building and ship repair activities.
(The study will be carried out in concurrence with various
International conventions, Requirements and guidelines)1. All relevant Annexes of MARPOL 1973/78 and
amendments there to.2. Relevant sections of IMO resolutions A.962 (23)”IMO
Guidelines on ship recycling” and amendments.3. Impact of exported “aquatic organisms or pathogens” on
local Marine Environment as per IMO Resolution A. 868 (20)
and amendments.4. “Potentially Hazardous Materials” as treated in EU
Regulation no 259/93 annexes II/III & IV and assessment of
their impact on local environment.
CONSULTANCY
Environmental Engineering & Protection
Techno-Functional:· Site selection & due diligence.· Design, Erection & Commissioning of industrial units, Water
Treatment Plant (WTP), Effluent Treatment Plant (ETP),
Sewage Treatment Plant (STP) etc.· Preparation of Mining plan, Environmental Clearance,
Forest Diversion Proposal, Rehabilitation & Reclamation.· Liaisoning with statutory authorities.· Mechanical Fabrication.· Preparation of TEFR for Integrated steel plants.· Preparation of TEFR for MSW Management practices.· Preparation of Feasibility Report for Water Pipeline & Intake
Well Design, Supervision & Commissioning.· Design, Erection & Commissioning of Dust Suppression
Equipments like Sprinkler System, Dry Fog system &
Scrubber etc.· Dust Extraction system like cyclone & Bag filter.
Legal Liaisoning:We Advice on various legal matters related to industries / mines,
and represent on behalf of clients in interacting with various
authorities. We always keep up with the latest Notifications,
circulars of the authoritative bodies for appropriate advice to our
clients.
Forest Diversion plan:Preparation and approval of Forest proposal both stage I & II under
section-2 of F.C. Act. 1980 (Amended)
Land Acquisition:Preparation of ROR and secondary documents from the Govt.
Authority, liaisoning with Govt. Authority & PAP. Assisting the project
Authority in carrying out Grama Sabha, carrying out Land
Acquisition as per Land Acquisition Act, 1894 & current ROR policy
of state Govt. convincing the PAP for smooth transaction of land.
Services
CONSULTANCY
Project Facilitation
Land Unit:Collection of village maps, Record of Rights, digitization of maps,
demarcation of land, preparing land schedules, preparing
documents for acquisition. Preparation of ROR and secondary
documents from the Govt. Authority, liaisoning with Govt. Authority
& PAP. Assisting the project Authority in carrying out Grama Sabha,
carrying out Land Acquisition as per Land Acquisition Act, 1894 &
current ROR policy of state Govt. convincing the PAP for smooth
transaction of land.
Forest Unit:
Survey of forest area, prepare document on flora & fauna, mitigation
measures and prepare appraisal documents. Preparation and
approval of Forest proposal both stage I & II under section-2 of F.C.
Act. 1980 (Amended)
R&R Unit:
This unit takes up base line survey, Prepare estimates; prepare
entitlement matrix & Action plan for the client. Equipped with a state
of the art laboratory with ISO 9001 Certified for testing of building
materials, it has mobile laboratory to do the same on the site. It has
provided consultancy services to multifarious projects like
Township, Multi-storeyed building, highways, Railway, bridges,
flyover, subway stadium, Hotels, technical building, auditorium,
hospital, Oil terminal, aviation building, educational institutions,
hostel, Industrial structure, area Drainage, High transmission line,
MS/HSD Retail outlet etc. The firm has undertaken design jobs for
Indian Railways for bridges, tracks, siding etc and has been
carrying out Project Management assignment of Major Railway,
Road & Housing Projects.
Legal Liaisoning:
We Advice on various legal matters related to industries / mines,
and represent on behalf of clients in interacting with various
authorities. We always keep up with the latest Notifications,
circulars of the authoritative bodies for appropriate advice to our
clients.
Services
Facilitate services, documentation & processing.
CONSULTANCY
IDAX has worked on planning, designing, building and supporting
urban development projects that include information technology
parks, hotels, hospitals, new townships, as well as special projects
such as earthquake resistant housing and renovation of flood-
affected structures.IDAX's expertise and competencies include detailed architectural
design, civil, structural and electrical engineering, construction and
zoning laws.
4IT parks
4Hotels
4Buildings
4Hospitals
4Townships
4Heritage conservation
IDAX has been deeply Involved in engineering and consulting on a
large number of infrastructure development projects across India
and overseas. Our key personnel have been very active in projects
relating to water supply, sewage and wastewater treatment, building
of roads and bridges, culverts, Telecommunication, airports,
seaports and harbours.
4Water supply, Waste water, Storm water and Public Health 4Engineering
4Pumping Schemes
4Leak detection
4Rainwater Harvesting
4Offshore Platform, Pipeline
4Urban and Rural Development
4Airports
4Ports and harbours
4Telecommunication
Sectors
Architecture, Structural and town planning
Infrastructure & Telecommunication
CONSULTANCY
IDAX has been associated with the chemical industry and
has built up a broad bank of experience and knowledge in a
large number of sub-sectors. IDAX has provided extensive
consultancy services in this sector. Our key personnel were
deeply involved from detailed engineering to construction,
supervision and procurement and have been active in many
other projects.
4Refineries
4Petrochemicals
4Pharmaceuticals
4Pulp and paper products
4Food and allied products
4Manmade fibres
4Pesticides
4Fertilisers
4Sugar
IDAX contributes its expertise and competencies to a large number
of industries and sectors too .
4Cement
4Automobiles and auto components
4Glass
4Tyres
4Iron and Steel Plants
4Coal to Liquid (CTL) Projects
4Alumina & Aluminum
4Pelletization plant & Washeries
IDAX has been very active in the metals and minerals, having
worked extensively with steel plants, tin plate, steel strip rolling
plants, etc.
Sectors
Mining, minerals and metallurgical
Chemical & Industrial
CONSULTANCY
IDAX has extensive experience in providing Construction Supervision, Construction
Management/ Project Management services in the following sectors:
4Power & Energy
4Infrastructure Projects
4Buildings and IT Parks
4Chemical & Industrial Projects
4Highways, Railways & Bridges
4Mining, Minerals and Metallurgical
4Nuclear & Special Projects
4Safety Related Services
Sectors
Construction
Environmental Monitoring & Analysis
The Environment is being the main concern of nation for rapid
industrialization. Therefore the government is provided the
yardstick to keep pollutant within the limit. IDAX is well equipped
with latest technology based instrument to measure pollutants.
IDAX has extensive experience in providing Environmental
Services in the following sectors:
4Water, Waste Water, Industrial Effluent
4Ambient Air Quality Monitoring
4Environmental Clearances, Forest Diversion Plan
4Mining Plan
4Coastal & Marine Pollution
4Soil Conservation & Disaster Management
4Soild Waste Management for Hazardous, Non-Hazardous,
Municipal Waste, Bio-medical Waste, Industrial Waste
C-103, Jyotshna Enclave, Jaydev Vihar, Near Mayfair Hotel, BhubaneswarPIN - 751010, Odisha, INDIA, Ph: +91 - 674-3199991,Fax: 0674-2360019, e-mail: [email protected], website: www.idaxconsulting.com
IDAX CONSULTING & RESEARCH GROUP