product line ❘ franssons
DESCRIPTION
Our range of Machinery for Recycling, Waste and Biomass industry consists of 3 main lines: Industrial Shredders. We are Manufacturers and Designers of Biomass/Wood Shredders, and Fine Grinding Mills for wood chips since 1945. Plastic Shredders since 1963. Waste Shredders for Refuse Derived Fuel and MSW since 1981, Single-Shaft Shredders since 1994 and many more. Sorting systems. Mechanical Screeners for Wood Chips and Pneumatic Separation Equipment for Waste Sorting adds value in a Waste Plant. Conveyors, Feeding and Fans. Redlers (Chain Conveyors), Vibrating Tables, FeedHoppers for bulk material and Highly Resistant Fans for transport of abrasive materials, such as mineral wool, glass fibre, etc.TRANSCRIPT
Innovative technology and the way we see Performance
Long Experience Originally established in 1945, we have over six decades and three generations of experience. During these years, we’ve been known for our flexibility and innovative spirit.
Premium QualityFranssons offers a range of high-end equipment constructed in to the smallest detail and built using the best components and materials available on the market.
R & D innovationOur design philosophy is continuous improvement. Along the way of innovation, requires not only the experience to refine every detail, but also that the machine production takes place with the most modern technology.
Technical AvailabilityAvailability is profitability - Minimal maintenance, fast and easy - Parts in stock - Components with international support How we work Our construction idea is based on the material to be processed: After analyzing the client’s material, we decide what settings and structures are appropriate to achieve maximum performance and profitability.
Meticulous Process Franssons Q-control is a process of quality control, but we call not only the finished whole product, but we analyze every detail and component until we find the most.
GuaranteeWe carry out design and satisfaction to the same point. We never compromise on durability with performance or vice versa.
2
Wherever we are, we have the same goal:To be number one in the market, offering the best customer experience, providing high quality machinery and an efficient cost structure.
3
“
“
PRESHREDDERS
FRX are single shaft preshredders, extremely robust, with hydraulic pusher and a hydraulic screen change system with positive opening.
Thanks to its cutting system X-cross it shreds the most difficult materials.
Possibility to obtain fractions from 30 to 300 mm. in one step.
Shreds materials:Industrial waste • Urban waste • Logs • Laminates • Bark • Wood waste • Paper • Craft • Plastic • Textiles
Recommended for:All types of bulk and bulky material, with contaminants.
Obtains fractions:100 - ∞ mm.
Capacity: 80 - 200 m³/h
4
WOOD INDUSTRIAL WASTE URBAN WASTE
DESTROYER
5
Hydraulic Reject HatchEmpty the machine from contaminants
URBAN WASTE BULKY
Screen + OpenPositive opening, making maintenance easier.
Pusher® CleanPusher™Maximum control of production
InletBig dimensions
Belt tensionersUsing hydraulic system
TransmissionElectromechanical or hydraulic
Construction StarkKroppMaximium resistance
Teeth X-CrossMaximimum resistance and efficiency
Service hatchComfortable access for controls
SECONDARY FOR HIGH PERFORMANCE
Single shaft shredder with medium speed. Electric drive and hydraulic pendulum feeder, with low energy consumption.The pendulum feeder press the material against the rotor, equipped with fixed teeth that cut the material against anvil steels.The feeder, is operated by a last generation hydraulic system with hydraulic variable displacement axial piston pump.The process is set from software in the PLC.
Key benefits:• Low electrical consumption.• Low dust and noise level.• Very simple maintenance.• It is not necessary with rotor cooling.• Can process material down to 10mm in one step.• Technical availability from 96% to 98%.• Possibility to add water in the inlet.
Shreds materials:Industrial waste • Urban waste • Logs • Laminates • Bark • Wood waste • Paper • Craft • Plastic • Textiles
Obtains fractions:8 - 150 mm.
Capacity:50 - 140 m³/h
6
WOOD PLASTIC WASTE
///P h a n t o m
7
TEXTILE PAPER FISH NET
Rotor EuroShredder ™Bigger surface. More cooling.
Screen + OpenPositive opening, making maintenance easier.
Pusher® CleanPusher™Free of maintenance, no jams, no spill
TransmissionElectromechanical of high performance
Construction StarkKroppLess weldings. More resistance.
Teeth CoverCross™Higher cutting surface, self sharpening geometry.
Belt tensionersUsing hydraulic system Hydraulic Reject Hatch
Empty the machine from contaminants
Service hatchComfortable access for control
UNIVERSAL SHREDDERS
Single shaft shredder with medium speed. Electric drive and hydraulic pendulum feeder, with low energy consumption.The pendulum feeder press the material against the rotor, equipped with fixed teeth that cut the material against anvil steels.The feeder, is operated by a last generation hydraulic system with proportional valve or hydraulic variable displacement axial piston pump.The process is set from software in the PLC.
Key benefits:• Low electrical consumption.• Low dust and noise level.• Very simple maintenance.• It is not necessary with rotor cooling.• Can process material down to 10mm in one step.• Technical availability from 96% to 98%.• Possibility to add water in the inlet.
Shreds materials:Industrial waste • Urban waste • Logs • Laminates • Bark • Wood waste • Paper • Craft • Plastic • Textiles
Obtains fractions:8 - 150 mm.
Capacity: 3 - 80 m³/h
8
WOOD PLASTIC WASTE
9
TEXTILE PAPER FISH NET
Rotor EuroShredder ™Bigger surface. More cooling.
Screen + OpenPositive opening, making maintenance easier.
Pusher® CleanPusher™Free of maintenance, no jams, no spill
TransmissionElectromechanical with hydraulic clutch
Construction StarkKroppLess weldings. More resistance.
Teeth CoverCross™Higher cutting surface, self sharpening geometry.
Hydraulic service hatchComfortable access for control
SECONDARY WITH HIGH RESISTANCE
RAMBO Hammercutter™ is a fast rotating shredder with cutting hammers.How it works? The material is loaded on the vibrating table which distributes the material for a smooth and efficient feeding. The feeding rollers crush and push the material toward the inside of the shredder, where it is shredded towards the rotor with swinging hammers, with a special labyrinth system.
Key benefits:• For high capacity demands• Resistant to contaminants• Sturdy machine• Equipped with knock sensor• Technical availability from 96% to 98%
Shreds materials:Industrial waste • Urban waste • Biomass • Bark • Wood waste
Obtains fractions:40 - 100 mm.
Capacity: 80 - 200 m³/h
10
WOOD INDUSTRIAL WASTE
Rambo Hammercutter™
11
INDUSTRIAL WASTE
Outlet screenReplaceable, 30 to 200mm
Hydraulic service hatchTotal access to the interior
Rotor Hammercutter™ Swinging cutting hammers
Vibration and knock sensorsNotifies and stops the machine if contaminants enter
Controled feedingFeeding rollers, variable pressure and speed
Transmission F-drive
Disc brakeReduce braking time with 80%
Vibrating tableDistributes the material in a continuos flow
BIOSHREDDERS
THOR Hammercutter™ is a fast rotating shredder with cutting hammers.How it works? The material is loaded on a vibrating table or conveyor belt which distributes the material for a smooth and efficient feeding. The material falls into the shredder where the rotor with swinging hammers crushes the material, with a special labyrinth system.It is a sturdy machine, and specially used in biomass and bioenergy industry.Requires pre-shredded material and is normally used as secondary shredding.
Key benefits: • High capacity• Process bark• Sturdy machine• Economic maintenance• Technical availability from 96% to 98%
Shreds materials:Wet wood • Dry wood • Bark • Paper • Craft • Biomass
Obtains fractions:10 - 100 mm.
Capacity: 3 - 150 m³/h
12
WOOD / BIOMASS
THOR Hammercutter™
13
Anvil steelsEasy regulation from outside
Hammers Hammercutter™Swinging cutting hammers
InletSpecial geometry to avoid the “air bag” effect
Rotor X-RotorNo blind spots, maximum efficiency
BearingsDisplaced oscillating
Transmission F-drive
FINE GRINDING MILLS
HK mills are for fine grinding of wood chips and paper. Fast rotation, fixed hammers and an integrated fan makes possible a high capacity, obtaining homogenous fractions of wood down to 1 mm.One of the most remarkable features of the HK mills, is the quality of the final fraction, with a very precise particle size and with a minimum of dust. Interesting for burning and pellet industry.
Key benefits: • Shreds humid/green wood• Can shred dry wood down to 1 mm.• Very homogeneous fractions• Low maintenance costs• Technical availability from 96% to 98%
Shreds materials:Green/wet wood • Dry wood • Bark • Paper • Craft
Obtains fractions:1 - 20 mm
Capacity: 800 - 6.000 kg/h
14
WOOD / BIOMASS
15
Phneumatic shredding systemHigh performance and high homogeneity
ScreensSubstitutable, from 1 to 30 mm.
Venturi systemPrevents entry of impropers
Transmission F-drive
HammersFour sides, increasing the technical availability
COMPLETE PLANTSSIMPLE AND EFFICIENTOur goal is to build simple and conceptual plants for an interesting feasibility from the point of view of investment and pay-back.
We have a long and proven experience in the following fields:
• Biomass plantsGreen and dry wood, for final product: - Pellets/Briquettes - Fuel
• Waste plantsIndustrial and urban waste, for final product: - Recovery/Recycling - Destruction - RDF/SRF/Fuel
16
RDF/SRF BIOMASS
17
HAZARDOUS WASTE INDUSTRIAL WASTE
Engineering
Type Image Model Kw Rotor Inlet Weight
Primary
FRX3800 400 ∅800 x 3800 3660x2479 34.000
PrimaryFRX3000 220 - 320 ∅800 x 3000 2960x2479 28.500Primary
FRX2000 150 - 264 ∅800 x 2000 2460x2479 24.000
Secondary
FRS3008 320 ∅800 x 3000 2960x2480 27.000
Secondary
FRS2008 180 - 264 ∅800 x 2000 2460x2480 23.000
Secondary
FRS3006 180 - 264 ∅600 x 3000 2959x1850 21.400
Secondary
FRS2506 150 - 220 ∅600 x 2500 2459x1850 19.500
SecondaryTXM250s 730 - 1000 ∅1600 x 2500 2500 x 600 34.000Secondary
TXM200s 500 - 730 ∅1600 x 2000 2000 x 600 27.000
Secondary
TXM200 315 - 500 ∅1100 x 2000 2000 x 400 21.000
Secondary
TXM150 315 - 450 ∅1100 x 1500 1500 x 400 17.000
Secondary
TXM100 250 - 315 ∅1100 x 1000 1000 x 400 12.000
Rambo Hammercutter™
///P h a n t o m
DESTROYER
PELIGROSO
Type Image Model Kw Rotor Inlet Weight
Universal
FRP301 180 - 220 ∅600 x 3000 2960x1850 20.000
Universal
FRP251 150 - 180 ∅600 x 2500 2460x1850 18.000
Universal
FRP181 110 - 150 ∅600 x 1800 1760x1850 14.000
Universal FRP203 75 - 90 ∅400 x 2000 1950x1250 8.000Universal
FRP153 55 - 75 ∅400 x 1500 1510x1250 5.500
Universal
FRP141 37 - 55
∅250/400 x 1400
1424x1123 3.200
Universal
FRP91 22 - 30 ∅250 x 900 920x1123 2.700
Fine grinding
HK45 132 - 250 - ∅450 4.700
Fine grinding HK35 110 - 200 - ∅350 2.800Fine grinding
HK26 55 - 110 - ∅260 1.700
Bioshredders
TXV 132 - 315∅1100 x 1000-
20001470-1970 x
600 10.050-18.000
Bioshredders TXP 90 - 250∅800 x 700-1000-1500
675-1500 x 550 6.500-7.600Bioshredders
TXC 22 - 90∅600 x 500-
1000545-1085 x 400 1.450-2.250
THOR Hammercutter™
AFTER SALESNEAR YOUTechnical ServiceOfficial and exclusive Franssons service in many countries.
Spare partsOriginal spare parts always available and in stock, guarantee maximum availability.
Protection PlansIn some countries we offer programmed service agreements.
SwedenFranssons Recycling Machines ABTimmervägen 8Sundsvall, SWEDENTel.: +46 60 56 78 [email protected]
SpainFranssons Máquinas de Reciclaje, S.L.Calle Platino 4, Pol. Ind. SurColmenar Viejo (Madrid), SPAINTel.: +34 918 469 [email protected]
TURNKEY SOLUTIONSEVERYTHING YOU NEEDWe offer customized turnkey solutions, in big and small scale. Contact us and we will study your project and needs.
Headquarters Sweden
Commercial office Spare parts warehouse Test center
After sales service
www.franssons.com