Inovativno CAD-mjerenjeInnovation CAD-Measurement

Mobile 3D-Measurement-System

Precizna izmjera projekata na terenui momentalna izrada 3D CAD nacrta Accurately measure on-site projects anddynamically create 3D CAD drawings

M bil 3D M t S t

Prijenosni 3D-sistem za mjerenje

Flexijet GmbHKrellstraße 10

32549 Bad Oeynhausen / GER

S +49 5731/18 660 60

@

Nacrt kupole krova u FlexiCAD softveru.

Drawing of a domed roof in the FlexiCAD software.

Sa Flexijet 3D

With Flexijet 3D, laser points are projected on site to verifythe dimension accuracy before beginning assembly.

Pharmacy showroom (top view)

CAD measurement of an external staircase (3D view)

Ekskluzivni zastupnik za EX YU | Distributor:

Studio element d.o.o.

S +38513738717 S +385 98 472900

@

www.3dmjerenje.com

Flexijet 3D is a new and revolutionary CAD

allrounders and specialists an optimal measure-

ment method.

and cost-saving measurements with Flexijet 3D.

Don‘t worry about faulty or inaccurate measure-

ments. You don‘t have to note anything – you can

see what you measure directly on your display.

Flexijet 3D is easy to handle in any situation.

Aids such as scaffolds or ladders are unnecessary.

Measuring curves, arches and less angulated

constructions are accomplished with speed and

accuracy.

Simultaneously, Flexijet 3D acts as a laser-pointer

to simplify installation work.

Što je Flexijet 3D?What is Flexijet 3D?

Flexijet 3D is a new and revolutionary CD

allrounders and specialists an optimal

ment method.

and cost-saving measurements with Fle

Don‘t worry about faulty or inaccurate

ments. You don‘t have to note anything

see what you measure directly on your

Flexijet 3D is easy to handle in any situD

Aids such as scaffolds or ladders are un

Measuring curves, arches and less ang

constructions are accomplished with s

accuracy.

Simultaneously, Flexijet 3D acts as a lasD

to simplify installation work.

Št j F

Flexijet 3D je nov i revolucionaran CAD sistem za

izmjeru koja štedi novac i vrijeme.

-

Flexijet 3D

drugom metodom.

Istovremeno Flexijet 3D -

Što je ? 3

What is Flexijet 3D?

Kome je namijenjen? 4 - 5

Who is Flexijet 3D suited to?

Prednosti u odnosu na konvencionalne metode mjerenja 5

Advantages to conventional measurement methods

oprema 6 - 7

Flexijet 3D hardware

FlexiCAD 2 software and interfaces

Special features

Scope of delivery

| Archetype view Flexijet 3D-nacrt | Measurement in FlexiCAD 2

3

Prednosti u odnosu na konvencionalne metode mjerenjaAdvantages to conventional measurement methods

Kome je namijenjen?Who is Flexijet 3D suited to?

Izvedite precizna CAD mjerenja u kratkom

vremenu u odnosu na konvencionalne metode

mjerenja.

Measurements can be undertaken by one

person.

Undertake measurements without restriction.

Measure 360º vertically and horizontally – even

perpendicular to the bottom.

Calculation of areas or spaces directly

after measuring the required points.

Creating templates can now be avoided.

Flexijet 3D pojednostavljuje kompleksna mjerenja.

djelatnosti:

Create precise CAD measurements in a fraction

of the time of conventional measurement tech-

niques.

i kompliciranih namještanja stalka

Easy to use without any detailed adjustment

of the tripod

Pogreške prilikom mjerenja i neizmjereni

detalji su sada povijest

Wrong and forgotten measurements or

transmission errors are history

kao AutoCAD ili na CNC strojeve

Ability to undertake further processing of

measured data in other software such as

AutoCAD or CNC machines.

Neposredna vizualizacija prostora na licu

mjesta prilikom mjerenja

Immediate on-site 3D visualisation as

measurements are performed.

Flexijet 3D

End users can be found in the planning, trade,

series manufacturing and industry sectors:

Dizajn interijera i opremanje

Interior design applications

Arhitekti i geodeti Architects andsurveyors

Staklari

Glass and storefrontconstruction

Klesari i zidariStone workers / masons

Inspektori i nadzorEvaluators Booth construction

BrodograditeljiShip interior work

i mnogi drugi

and many more

Furniture makers and carpenters

Staircase construction

Kuhinjski studio Site measurements forkitchen construction

Bravari i metalna industrija

Metal work

54

Izmjera na objektu Izrada CAD nacrta, provjera i prema potrebi ponovna izmjeraMeasurement on-site (e.g. construction area) Creation of CAD drawing, verification or new measurements as needed

1. Osoba 2. Osobe

6h 12h 18h 24h

Izmjera na objektu i izrada CAD nacrta na objektu Measurement on-site and creation of CAD-drawing on-site

Samo 1 osoba Potpun CAD nacrt kao ovaj: 6h Complete CAD-drawing like this:

Potrebno vrijeme za konvencionalnu CAD izmjeruTime requirement for conventional CAD-Measurement.

Usporedba sa Flexijet 3D.Compared to Flexijet 3D.

360°

2 3,51,2

= 9,8m³

?

aopremaFlexijet 3D hardware

Laserski daljinomjer -

profesionalni 3D

softver za mjerenje FlexiCAD 2.

Flexijet 3D

daljinskog uprav-

Motorizirano kretanje izvode motori

visokih performansi i dinamike.

pritiskom tipke na laptopu.

Integrirani senzor nagiba -

-

Shock senzor

Flexijet 3D consists of a Laser Distancemeter

mounted on a motorized rotatable device and

the professional 3D-measurement software

FlexiCAD 2.

An important feature of Flexijet 3D is that the

device can be moved to the target point, either

manually or by the remote controlled internal

motor.

Motorized movement to points is the result of

high-performance and high-dynamic engines.

The activation of measurements with Flexijet 3D

can be done with a touch sensor on the device,

with the remote control or by pressing a key

on your laptop.

example with a level or laser alignment,

is not necessary anymore with Flexijet 3D.

The integrated inclination sensor makes

sure that you can start immediately with your

measurements.

In the event the

device is acciden-

tally knocked during

measurements, an

integrated shock sensor

will detect any movement.

Flexijet 3D can be relocated on points measured

previously, so that you are able to continue your

measurements.

Thereby taking measurement from different

location is quite easy as well. Simply set up the

device on a different location or on a different

Flexijet 3D comes with a removable battery

that can be replaced without interruption to the

measurement process.

Average battery life is approximately 8 hours,

dependent on manual or motorised operation.

Remaining battery life is indicated visually in the

FlexiCAD 2 software.

Flexijet 3D

postavi na drugu lokaciju i nastavi se sa mjerenjem.

Flexijet 3D

FlexiCAD 2.

76

sa postoljem za

Rugged case with tray for notebook

Remote control

C

sa protukliznom površinom

Height adjustable support plate

Integrirani laserskidaljinomjer

integratedLaser Distancemeter

Senzor dodira za aktivaciju mjerenja

Touchsensor

Accumulator slot

j j

dj j

hHeight adjustable support plate

Rugged case withtray for notebook

Remote control

Inovativno CAD-mjerenjeInnovation CAD-Measurement

Uvoz / izvoz podataka: DWG / DXF / XML

3D software IGES & STEP via RhinoCAD

Drvene stepenice Compass, Treppenmeister,

Staircon, Heglmeier

Kamene stepenice Scala

Arhitektura IFC

AutoCAD TachyCAD

Stolarija SEMA

Arhitektura Autodesk REVIT

Graphisoft ArchiCAD

Tachymeter & Digitaliziranu ruku

p

aFlexiCAD 2 software and interfaces

-

izravno sa lica mjesta u CAD program.

Brojne funkcije su optimalizirane za što precizniju

izmjeriti ili dali su svi relevantni podaci uneseni.

mjesto izmjere!

Mjerni podaci mogu se izvesti – Exportirati u

Importirati podaci direktno u softver. Nadalje

nekoliko programa imaju direktnu podršku za

The FlexiCAD software provides a comfortable

and intuitive user interface. Experienced CAD

users become quickly familiar with the interface

The function of the software is the creation of

– directly from site into CAD. Numerous functions

have been optimized for precise measurements

-

urement, you can track the completion of your

blueprint and ensure that all relevant data has

been processed. All this before you leave the

measurement site!

The measurement data can be exported by one

of the many export interfaces and imported

directly into your software. Furthermore, several

programs support a direct integration of the

Flexijet hardware.

• intuitive use supported by an assistant

• polar tracking, object capture and hatches

•

•

for well ordered measurement information

• symbol libraries with electrical, sanitary and

kitchen symbols

• measurement of inaccessible points

• sounding of points and marking of heights

• import of Auto CAD blocks

• optional interface to CNC machine

98

Nacrt nakon izvoza u RhinoCAD Drawing after export to RhinoCAD

Flexijet 3Dprograma Sema za projektiranje drvenih konstrukcija.Flexijet 3D is completely integrated, for example thesoftware SEMA for wood construction.

•

•

•

•

•

•

•

•

•

a Opseg isporukeScope of deliverySpecial features

1110

Automatsko mjerenje | Automatic series of measurementsFlexijet 3D

naredne zadatke. Automatsko mjerenje podrazumijeva hori-

-

horizontalnom serijom izmjera.

D Flexijet 3D

measures automatically the form of the walls while you can

pursue other tasks. The automatic series of measurements include the horizontal, vertical and along the series

of measurement of arbitrary mapping. For example, the hull of a boat can be measured automatically with a

vertical series of measurements. A curved wall surface can also be measured with a horizontal series of measurements.

| Initiating the points of constructionFlexijet 3D

Let the arbitrary points out of the drawing be displayed by Flexijet 3D. Click

on a point of construction in CAD-System and Flexijet 3D will show you the

| Surface area scan

Draw or measure any arbitrary enclosed outline and create a hatched measure-

ment pattern. With the „surface area scan“ command, all the intersections of the

hatched pattern will be automatically measured with the various levels displayed

(an ideal feature for laminate and tile layers).

3D skeniranje | 3D scanningFlexijet 3D

a rectangular area and the number of points to be measured. Flexijet 3D will then digitise this area with

approx. 2,000 measurements per hour, thus creating point cloud data that can be used for external modelling

(eg. terrain model).

Spline explode primjer | Spline explode example

drugih.

When digitising a sink cut-out, initially calibrate several points of the

cut-out. Afterwards, overlay a Spline of the measured points so that

contour on the CNC can be perfectly manufactured. In doing so, the Spline is converted into line segments,

tangential curves or into a combination of both.

| Transferring benchmarksFlexijet 3D

Flexijet 3D

Calibrate an arbitrary level with Flexijet 3D. Then turn the device to the point in which the height measured

afore should be displayed. At the push of a button Flexijet 3D initiates the measurement of the height.

Flexijet 3D

• Flexijet 3D

Laserski daljinomjer

Measurement device Flexijet 3D with

integrated Laser Distancemeter•

Integrated inclination sensor

(no adjustment of the tripod)• Integrirani senzor pomaka

Integrated shock sensor

Flexijet 3D will be delivered in a robust case and

consists of:

•

Remote control for motor-driven movements• | Charging device•

•

High-quality case including support plate and

tray for notebook• FlexiCAD 2 licencu | FlexiCAD 2-license

Opseg isporuke | Scope of delivery