presentación movitrac® 07b
TRANSCRIPT
Product Overview MOVITRAC B
MOVITRAC® B 0
MOVITRAC B
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 1
MOVITRAC B
Product phase-out of MC31C and MC07A
MC31C ���� MOVITRAC B • New components and production
technology (MC31C: 1995/96)
MOVITRAC ® 31C
technology (MC31C: 1995/96)
• Modular design• Smaller dimensions
MC07A ���� MOVITRAC B• Compatible with MC07A• Smaller dimensions
• Longer motor cable lengths• Option-capable
Driving the worldSES / Senger / Mai 2007
MOVITRAC ® 07A
MOVITRAC ® B
General information• Extended power range
(BG0XS, BG5, BG6)
• Additional functions• Standardization MDX B / MC B• Cheaper because option-capable
Product Overview MOVITRAC B
MOVITRAC® B 2
MOVITRAC® B BG 0
MOVITRAC® B BG 2S – 5 (6)
Driving the worldSES / Senger / Mai 2007
Monolith units
Control units
Product Overview MOVITRAC B
MOVITRAC® B 3
Features of MOVITRAC B Size 0 Monolith
� Single-board inverter (monolith unit)
� Compact, book-shaped design with IP 20
� Power range: � Power range:
� 230 V 1 ph 0.25 kW – 2.2 kW
� 500 V 3 ph 0.25 kW – 4.0 kW
� Overload capacity
� 125 % IN continuous duty
� 150 % IN for max. 60 sec.
Driving the worldSES / Senger / Mai 2007
� 200 % IN max. breakaway torque
� Integrated brake chopper
Product Overview MOVITRAC B
MOVITRAC® B 4
Features of MOVITRAC B Size 0 Monolith
� Braking resistor can be mounted on the back
� Three-color status/diagnosis LED
� Integrated EMC line filter� Integrated EMC line filter
� 1 ph units class B filter
� 3 ph units class A filter
� EMC filter can be deactivated
� "Cold Plate" installation possible
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 5
Unit overview MOVITRAC B Size 0 230 V 1 ph
MC07B-XXX-2B1-4-00 0003 0004 0005 0008 0011 0015 0022
Mains voltage (AC) 1 x 200 V –10 % ... 1 x 240 V +10 % 50 / 60 Hz ±5 %Mains voltage (AC) 1 x 200 V –10 % ... 1 x 240 V +10 % 50 / 60 Hz ±5 %
Power (kW) 0.25 0.37 0.55 0.75 1.1 1.5 2.2
EMC filter EMC filter class B integrated
Size BG0XS BG0S BG0L
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 6
Unit overview MOVITRAC B Size 0 500 V 3 ph
MC07B-XXX-5A3-4-00 0003 0004 0005 0008 0011 0015 0022 0030 0040
Mains voltage (AC) 3 x 380 V –10 % ... 1 x 500 V +10 % 50 / 60 Hz ±5 %Mains voltage (AC) 3 x 380 V –10 % ... 1 x 500 V +10 % 50 / 60 Hz ±5 %
Power (kW) 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3.0 4.0
EMC filter EMC filter class A integrated
Size BG0XS BG0S BG0L
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 7
Unit overview MOVITRAC B Size 0 230 V 3-ph
MC07B-XXX-2A3-4-00 0003 0004 0005 0008 0011 0015 0022
Mains voltage (AC) 3 x 200 V –10 % ... 3 x 240 V +10 % 50 / 60 Hz ± 5 %Mains voltage (AC) 3 x 200 V –10 % ... 3 x 240 V +10 % 50 / 60 Hz ± 5 %
Power (kW) 0,25 0,37 0,55 0,75 1,1 1,5 2,2
EMC filter EMC filter class A integrated
Size BG0XS BG0S BG0L
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 8
Features of MOVITRAC B control unit
� Modular design (control unit)
� MOVIDRIVE power sections
� BG2S – BG5 (BG6) = 500 V units� BG2S – BG5 (BG6) = 500 V units
� BG1 – BG4 = 230 V 3-ph. units
� BG6 in preparation
� Overload capacity
� 125 % IN continuous duty
� 150 % IN for max. 60 sec.
Driving the worldSES / Senger / Mai 2007
� Three-color status/diagnosis LED
� Universal usabilty with BG0
� Safe technology (since FW13)
Product Overview MOVITRAC B
MOVITRAC® B 9
Unit overview MOVITRAC B control units 500V
MC07B-XXX-5A3-4-00 0055 0075 0110 0150 0220 0300 0370 0450 0550 0750
Mains voltage (AC) 3 x 380 V –10 % ... 1 x 500 V +10 % 50 / 60 Hz ± 5 %Mains voltage (AC) 3 x 380 V –10 % ... 1 x 500 V +10 % 50 / 60 Hz ± 5 %
Power (kW) 5,5 7,5 11 15 22 30 37 45 55 75
EMC filter EMC filter class A
Size BG2S BG2 BG3 BG4 BG5
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 10
Unit overview MOVITRAC B control units 230V
MC07B-XXX-2A3-4-00 0037 0055 0075 0110 0150 0220 0300
Mains voltage (AC) 3 x 380 V –10 % ... 1 x 500 V +10 % 50 / 60 Hz ± 5 %Mains voltage (AC) 3 x 380 V –10 % ... 1 x 500 V +10 % 50 / 60 Hz ± 5 %
Power (kW) 3,7 5,5 7,5 11 15 22 30
EMC filter EMC filter class A
Size BG1 BG2 BG3 BG4
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 11
Scope of MOVITRAC B functions
� 6 binary inputs (freely programmable)
� 3 binary outputs (1x relay)� 3 binary outputs (1x relay)
� Analog input (0-10V)
� 24V input and output
� 10V reference for setpoint potentiometer (10k)
� TF supply + TF input
Driving the worldSES / Senger / Mai 2007
� Frequency input
Product Overview MOVITRAC B
MOVITRAC® B 12
New funtions MDX B terminals
� Separable power terminals (up to BG 2S)
� Separable control terminals
Driving the worldSES / Senger / Mai 2007
� PI connection to grounding terminal (BG0)
Product Overview MOVITRAC B
MOVITRAC® B 13
Option capability
� FBG11B keypad front option
� FSC11B communication module
� FIO11B analog module (analog in- and output)
Driving the worldSES / Senger / Mai 2007
� MDX B option cards can be used
e.g. DFP21B with ULS11B
Product Overview MOVITRAC B
MOVITRAC® B 14
FBG11B option
� FBG11B keypad front option
� 5 character LED display� 5 character LED display
� Operation similar to MC07A
� Extended operating features
� Additional key replaces double-click (MC07A)
� Parameter set backup
� Non-SEW motor startup
Driving the worldSES / Senger / Mai 2007
� Non-SEW motor startup
Product Overview MOVITRAC B
MOVITRAC® B 15
FSC11B option
� FSC11B communication module option
� RS485 interface. Implemented as RJ10 socket
for service and diagnostic purposes and as
plug-in terminal for RS485 bus communication
� CAN-based system bus (SBUS). Implemented as
plug-in terminal
Driving the worldSES / Senger / Mai 2007
� Terminating resistors for SBUS termination
� 24 V auxiliary power input and output
Product Overview MOVITRAC B
MOVITRAC® B 16
Option FIO11B
� FIO11B analog module option
� Analog setpoint input AI2
useable for current or voltage setpoint setting
� Analog output AO(V,C)1
useable as current 0(4)-20 mA or voltage output 0-10V
� RS485 interface. Implemented as RJ10 socket
Driving the worldSES / Senger / Mai 2007
� RS485 interface. Implemented as RJ10 socket
for service and diagnostic purposes and as
plug-in terminal for RS485 bus communication
� Note: If using FIO11B, SBUS interface is not available
Product Overview MOVITRAC B
MOVITRAC® B 17
DBG60B option (in preparation)
� DBG60B keypad can be used with MOVITRAC B
as an option
� Option FIO11B or FCS11B is needed
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 18
Option MBG11A
� Control device MBG11A can be used optional with
MOVITRAC B
� Option FIO11B or FCS11B is needed
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 19
Option UBP11A
� Parameter module UBP11A can still be used
� Option FIO11B or FCS11B is needed
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 20
Option capability of DFX fieldbus
� MOVIDRIVE B fieldbus cards, e.g. DFP21B
� If fieldbus card is installed, MC B can be used as gateway for� If fieldbus card is installed, MC B can be used as gateway for
up to 8 units
Sta
nd
ard
fie
ldb
us
8x
Driving the worldSES / Senger / Mai 2007
Sta
nd
ard
fie
ldb
us
Communication via SBus
Product Overview MOVITRAC B
MOVITRAC® B 21
Option capability new gateway
� in combination with UOH11B housing new fieldbus gateway is available
� several MOVIDRIVE B field bus cards can be used e.g. DFP21B � several MOVIDRIVE B field bus cards can be used e.g. DFP21B
Sta
nd
ard
fie
ldb
us
8x
Driving the worldSES / Senger / Mai 2007
Sta
nd
ard
fie
ldb
us
Communication via SBus
Product Overview MOVITRAC B
MOVITRAC® B 22
Option capability of UFX fieldbus
� You can still use UFX gateways
Sta
nd
ard
fie
ldb
us
8x
Driving the worldSES / Senger / Mai 2007
Sta
nd
ard
fie
ldb
us
Communication via SBus
Product Overview MOVITRAC B
MOVITRAC® B 23
Option capability MOVIPLC
� MOVIPLC (DHP11B) can be operated in MOVITRAC B
� MOVIPLC (DHP11B) can also be used in UOH11B housing
� MOTION Library for MOVITRAC B available � MOTION Library for MOVITRAC B available
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 24
New functions MC B IT network
� Size 0 units can be modified to IT network versions
� Simple handling
� by inserting a plastic washer, EMC capacitors are� by inserting a plastic washer, EMC capacitors are
insulated for operation in IT network
� Customer can adjust the unit
� Special designs no longer necessary
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 25
New functions MC B MOVITOOLS MOTION STUDIO
� Engineering software MOVITOOLS MOTION STUDIO
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 26
New functions MDX B Scope function
� Scope available as standard
� New extended Scope via MOVITOOLS MOTION STUDIO
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 27
New functions MC B extended fault memory
� Extended fault memory
� Five fault memories (1 for MC07A)
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 28
Additional functions
� Second set of parameter
� Bipolar analog input (0-10V) for external potentiometer
� Longer motor cables (MC07A = 25 / 50 m)� Longer motor cables (MC07A = 25 / 50 m)
� Extended range of functions for the entire unit series
- Hoist
- Setpoint hold function
- Flying start function in preparation
Driving the worldSES / Senger / Mai 2007
Product Overview MOVITRAC B
MOVITRAC® B 29
MOVITRAC B Technology Version
� MOVITRAC B units as technology version available (since 12/2007)
� Units are comparable with MC07A LOGODRIVE, but without graphical
programming environmentprogramming environment
� For all MOVITRAC B units available
Unit designation e.g. MC07B0005-2B1-4-00/T
� IPOS functionality
Driving the worldSES / Senger / Mai 2007
� IPOS functionality
� application modules in preparation
� additional costs 95 €
Product Overview MOVITRAC B
MOVITRAC® B 30
MOVITRAC B Monolith units with safety stop
� New unit version of MOVITRAC B monolith units with safety stop
function
Unit designation e.g. MC07B0005-2B1-4-00/S
� Hardware is different to standard Monolith units
(SMPS is different)
Driving the worldSES / Senger / Mai 2007