preliminary - sennebogen · preliminary the premium cab. joysticks on resonant, seat-mounted...
TRANSCRIPT
Mobile material handler
Stage V
17 - 21 m
77 - 110 t
PRELIMINARY
227 kW (Stage IIIa) 231 kW (Stage V)
200 kW (Electro)
PRELIMINARY
227 2 kW (Stage IIIa)
231 2 kW (Stage V)
200 2 kW (Electro)
2 Subject to change. Additional options available upon request.
1962: rope-driven S833 with elevated operator cab
Advanced. The E-Series
65 years of experience in designing and constructing hydraulic material handling machines
Uncompromisingly high performance in all areas: Focus on material handling
Technology that can be mastered: High-quality components without over-engineering
Long service life and high value retention
What makes up the E-Series
Your top benefits:
Safe entry and exit – no-slip steps State-of-the-art cameras – entire work area in view
Maximum safety
Maxcab comfort cab – work in comfort SENCON – work program selection made easy
Maximum usability
Durable mechanical systems – stressed parts optimized High speeds– high load capacities
Top-level performance
Save fuel – reduce operating costs Work quietly – protect operator and environment
Green Efficiency
3 production sites – 2 subsidiaries 150 sales partners – over 350 service stations
Consultation and support in your area
SENNEBOGEN control system– easy error diagnostics Simple maintenance– clear labelling
Maintenance and service made easy
1
2
3
4
5
6
3Subject to change. Additional options available upon request.
4
The E-Series. At a glance.
min-1
1800 ECOmin-1
0 min-1
1400 min-1
800
0 s 5 s 8 s 5 min
Work Idle Stop
2
3
Up to 20 % savings: Work in EcoMode with reduced engine speed
Idle automation reduces speed to 40 % of operating speed
Stop automation switches the engine off when not needed
Optimized engine settings, reduced specific fuel consumption, state-of-the-art exhaust after treatment
Four ways to save fuel
Quiet operation
Consistently quiet operation thanks to decoupled engine mounts and soundproofing in the doors
Sound pressure level reduced by up to 4.5 dB; sound power level according to 2000/14/EC up to 2 dB lower than required
High-capacity cooling
Constant, reliable performance thanks to large-dimensioned and robust fans and coolers
Water and oil coolers with top-notch efficiency thanks to axial-piston pump and motor control and on-demand thermostatic control
Fan reversal for cleaning in series
4
PRELIMINARY
2 3
Subject to technical changes. Further options available upon request.
5
1
No-slip work surfaces Hand rails 2 cameras to the right and rear Step grid with railing next to cab sliding door
Protective guard*, windshield/roof
Maximum safety
Powerful hydraulic system
Strong pumps with power reserves Top efficiency thanks to large-dimensioned hydraulic valves and lines
Extra-long change intervals of 4,000 operating hours through initial fill-up with special oil with extended service life when using SENNEBOGEN HydroClean*
PRELIMINARY
4
*OptionSubject to technical changes. Further options available upon request.
6
PRELIMINARY
The premium cab.
Joysticks on resonant, seat-mounted consoles
Comfortable grip thanks to ergonomic design
Shortcuts for direct and sensitive control
Quicker access thanks to optimized design of buttons and switches
optimal indoor climate with automatic climate control, partly tinted windows
comfortable even temperature distribution via 9 air vents
panoramic view
Air suspended comfort seat, seat heater
quiet due to optimized soundproofing
Safety & comfort thanks to the sliding door, large access opening
operating elements arranged ergonomically, SENCON
12 V, 24 V, and USB charging sockets, cellphone holder, document folder
various options : electric cooler box behind the driver seat, slip covers, seat climate control
Equipment features
mized es
tric cooler seat, slip covers,
* Option
Slliiddddiiiing
dddoooooorrr
SENNEBOGEN Joysticks
7
PRELIMINARY
Maintenance and service made easy.
SENNEBOGEN-HydroClean*
Optimal protection of hydraulic components thanks to 3 μm micro-filter
Cleaner hydraulic oil, extended oil service life
Central measuring points
Easily accessible Quickly inspect the entire hydraulic system
Clear labeling
All parts labeled with a unique part number
Easy and reliable spare parts ordering
SENHyd
Optimhydrato 3 Cleanexte
* Option
Fast and easy diagnostic analysis thanks to the clearly labeled electrical distributor
Easy access to all service points on the machine
Automatic central lubrication for equipment and slewing gear raceway
Optimized for maintenance
8
Modular design – versatile solutions
3.00 m
2.60 m
E300/260
E270
2.70 m
Attachments
Multi-shell grab
Double shell grab
Magnetic plate
Wood grab
Equipment options (others available upon request)
Undercarriage variants
Upper carriage
Cabs Cab elevation K17 K19 K21
M Diesel-hydraulic drive
Electrohydraulic drive
Motorized cable reel
Transformer
Mobile EMP80
R83-450 crawler*
R90-550 crawler*
Mobile E MP71
Crawler gantry*P136-585
max.1.5 m max. 2.5 m
max. 4.0 m
4-point pedestal ST88-550
B19
al
Maxcab Industry
Maxcab
Ausrüstung (weitere auf Anfrage)quipments (additional upon request)
B20
Max.1,5m
Max.2,5m Max.
1,0mmax. 1.0 m
Max.3,0m Max.
3,0m
Mastercab
* additional information on our crawler undercarriages can be found in the 855 R E-Series hybrid brochure.
Skylift 700/900
max. 4.0 m
9
- Decade-long experience- most advanced computer simulation- the greatest degree of stability and longest service life
- Decade-long experience- most advanced computer simulation- the greatest degree of stability and longest service life
Green Hybrid
Advantages at a glance
Ideal overview and safe working height thanks to stable cab elevation
Safe entry and exit thanks to platform with railing
High stability due to the broad outrigger area
Better illumination of the work area through powerful LED headlights*
Reliable working thanks to robust and FEM optimized equipment
High load capacities even when fully extended, thanks to massive cylinders
Safe entry and exit thanks to railings, grip handles and no-slip steps
Robust side cover made from recyclable sheet steel
10 Technical features and dimensions subject to change.
Hydraulic oil
Control block
Nitrogen (Energy storage)
Safety Use of standard hydraulic components Energy storage in the enclosed rear section
SENNEBOGEN Green Hybrid Energy Recovery System
Reduce operating costs High quality components for a long service life and reliability
Proven concept: successfully in use since 2013 High efficiency of the system – already very effective in small lifting movements
Save 30 % energy with the Green Hybrid system
A combination of hydraulic cylinders at the outrigger and nitrogen piston accumulators with gas recovers energy during the work procedure
Use of the recovered energy during the next working cycle reduces the necessary engine power
PRELIMINARY
11
Recommended grabs
Dimensions in [mm]
SGM orange peel grab (5 shells)
Clamshell grab SGZ
Magnetic plates
SGM orange peel grab (4 shells)
1 ) Weight information without grab suspension, stick bolts, hose system
2 ) Half-open shells: shell sheet steel width 400 mm, 500 mm for 1,250 l capacity and higher
*) Available upon request
Detailed information on grabs, as well as log grabs, quick-release systems, and other attachments can be found in the "Attachments" brochure
M
Design / size Grab capacityWeight1 max.
piled densityShell shape2
HO G
SGM l kg kg t/m3
800.50 800 2580 2740
2.0
1000.50 1000 2710 2870
1500.50 1500 2860 3100
2000.50 2000 3060 3370
2500.50 2500 3130 3615
3000.50 3000 3250 3875
3500.50 3500 3420 4140
Type series / model Power Deadweight Breakaway force
Load-bearing capacity in kg
WOKO kW kg kN Bramme (safety factor 2)
S-RLB 15 11.7 2400 380 19000
S-RLB 17 17.8 3300 640 32000
S-RLB 19 22.0 5090 790 39500
Recommended magnetic generator: 20 - 25 kW
Design / size Grab capacity Weight1 max. piled density
SGZ l kg t/m3
1500.50-HD 1500 22403.5
2000.50-HD 2000 2535
3000.50-L 3000 21401.0
3500.50-L 3500 2260
4000.50-L 4000 24800.8
4500.50-L 4500 2600
Design / size Grab capacityWeight1 max.
piled densityShell shape2
HO G
SGM l kg kg t/m3
800.50-4 800 2245 2490
2.01000.50-4 1000 2345 2585
1500.50-4 1500 2475 2830
2000.50-4 2000 2660 3075
PRELIMINARY
12
Technical data, equipment M
SLEWING DRIVEGearbox Compact planetary gear with slant-axis
hydraulic motor, integrated brake valves
Parking brake Spring-loaded multi-disk brake
Slewing ring Very strong slewing ring sealed with pinion lubrication
Slewing speed 0–5,5 rpm, stepless
UPPER CARRIAGEDesign Torsion-resistant box design, precision
crafted, steel bushings for boom bearings. Extremely service-friendly design, longitudinal engine.
Central lubrication
Automatic central lubrication for equipment and slewing ring
Electrical system
Central electrical distributor, battery disconnect switch
Cooling system 3-circuit cooling system with high cooling output, thermostatically regulated fan drive for oil cooler and water cooler, fan reversal for cleaning
Options Slewing gear brake via foot pedal LED lighting packages Fire extinguisher Sea climate resistant coating as corrosion protection
Electric hydraulic tank preheating for temperatures below -20 °C
HYDRAULIC SYSTEMLoad sensing/LUDV hydraulic system, hydraulic pilot-controlled work functions, load limit sensing control
Pump type Swashplate-type variable-displacement piston pump, load pressure-independent flow distribution for simultaneous, independent control of work functions
Pump control Zero-stroke control, on-demand flow control – the pumps only pump as much oil as will actually be used, pressure purging, load limit sensing control
Operating pressure
max. 350 bar
Delivery rate 2 x 369 l/min and 1 x 240 l/min for rotary drive in the closed circuit
Filtration High-performance filtration with long change interval
Hydraulic tank 900 lControl sys-tem
Proportional, precision hydraulic actuation of work movements, 2 hydraulic servo joysticks for the work functions, additional functions via switches and foot pedals
Safety Hydraulic circuits with safety valves, secured emergency lowering of the equipment at engine standstill, pipe fracture safety valves for lift cylinder and stick cylinder
Options Bio-oil – environmentally friendly ToolControl for programming the pressure/rate for up to 10 tools
Additional hydraulic circuit for shear attachment Load moment warning with capacity utilization indicator
Overload safeguard with shutdown 60 μm pressure filter for attachments 3 μm hydraulic micro-filter – SENNEBOGEN HydroClean
ENGINEPower Stage V:
Rated Power: 231 kW at 2100 rpm 237 kW at 2000 rpm / 242 kW at 1800 rpm Stage IIIa: Rated Power: 227 kW at 2000 rpm 254 kW at 1800 rpm
Model Cummins L9 Direct injection, turbo-charged, charge air cooler, reduced emissions, Eco Mode, automatic idle, automatic stop, fuel pre-warming
Cooling Water-cooled, cooler fan reversal
Diesel filter With water separator and heating system
Air filter Dry filter with integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator
Fuel tank 1000 lDEF tank 100 lElectr. Annex 24 VBatteries 2 x 155 Ah, battery disconnect switch
Options Engine block heater Electric fuel pump
Options Low-temperature Hydraulically driven magnetic generator 20 kW / 25 kW
SENtrack DS telematic system
MACHINE TYPEModel (type) 855
PRELIMINARY
13
Technical data, equipment
Subject to change.
M
FUNCTIONINGDesign Decades of experience, state-of-the-
art computer simulation, highest level of stability, longest service life, large-dimensioned and low-maintenance bearing points, sealed special bearing bushes, precision-crafted, quick-release couplings on the connections – open/close/rotate grab
Cylinders Hydraulic cylinders with high-quality sealing and guide elements, end position damping, sealed bearing points
Options Ball valves in the hydraulic lines for quick and easy grab switching
Sea climate resistant coating Sea climate resistant coating of all cylinders, nickel-plated and chrome-plated
Float position of the equipment Hoisting limiter / stick limitation adjustable for stop settings, e.g. in the hall
UNDERCARRIAGEDesign MP71 E mobile undercarriage with integrated
4-point outrigger system, hydraulic locking pendulum steering axle and pendulum axle cylinder with pipe fracture safety valves
Drive All-wheel drive powered by a variable-displacement hydraulic motor with direct-mounted, automatically actuated brake valve Planetary axles with integrated steering cylinders, service brake in 2-circuit system
Parking brake Spring-loaded multi-disk brake
Tires 14.00-24, 8x
Speed 0-12 km/h variable
Options Tires: 16.00-25, 8x Traction drive protection Shunting coupler
ELECTRIC DRIVE Option Power: 200 kW / 400 V / 50 Hz
Total connected load 340 kVA, machine side fuse 400 A (alternatively 425 A with magnet system) for 400 V – via star-delta circuit
Advantages: Lowest operating costs, quiet and virtually vibration-free work, long service life of hydraulic components
OPERATING WEIGHTMass Notice
approx. 77,000 kg 855 M basic machine with K17 equipment and orange peel grab Operating weight varies by design.
CAB Cab elevation E270, hydraulically elevating cab
Cab equipment Sliding door inc. sliding pane, vibration damped, tinted safety glass, front pane can be openend, roof window, windscreen wiper for front pane, radio preparation, air-suspended comfort seat, joystick steering, SENNEBOGEN SENCON control & diagnosis system
Options 30° tiltable cab Cab elevation E300/260, can be elevated and moved forward hydraulically
Cab elevation Skylift 700/900 Mastercab (Large-capacity port cab) Maxcab Industry Armored-glass windshield Armored-glass sunroof Safety side window and rear window Windscreen wiper for front window/sky-light
Rolling shade for roof window and windshield
FOPS protective roof guard Protective front guard Charcoal filter for circulating and outside air Auxiliary heating Climatic seat Radio Electric cool box
PRELIMINARY
14
Load Ratings
Technical features and dimensions subject to change.
MPRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
17,,17,771777888888
226,267
29,94,
111 ,4,
7,7722222222
6,66
7,00
7,88
10,1044,
15,157
19,1900
21,4,
22,9
24,1
13,6
12,2
12,2
12,1288
0,4
115,55
12,3123
13,1
14,2
15,9
17,0170
17,9
18,9
19,6
19,9
19,1
17,5
15,1151
8,8,7
10,3110
1111,55
12,5
13,7
14,5
15,0150
15,5
16,1
16,6
16,8
16,2
15,0
13,1131
8,8,55
0110,10,100011000
11,4
12,72
13,13
13,431343
13,83
14,14
14,44
14,4444
13,93
12,92
1111,22
8,888000
9,777
11,1
11,9
12,1211
12,4,
12,6
12,7
12,1277
,
11,0
9,944,
8,777
10,1
1111,11
11,2
11,3
11,3
1111,22
0,9
0,30
9,
8,82222
9,3
10,2
10,1
9,988
9,4,
8,5
K17
Machine shown reversed
20180606104527
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required operating temperature in the Green Hybrid system. In accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
Compact boom: 10.5 m
Grab stick: 7.5 m
Cab: Maxcab E270, hydraulically elevating
Undercarriage: MP71
[ m ]
15
Load Ratings
Technical features and dimensions subject to change.
MPRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9-10
9,5 8,28,2
9,49,49,4
10,1
8,,22
9,, 733 ,9
12,51
13,9
10,810 8
11,6
12,5
13,8
10,1010 10
11,01
12,02
12,42
9,9 00
10,11
11,11
11,33
7,777 4444
8,6
9,7
10,4
6,666,6,5
7,8
8,9 7,77 000
23 5,53 53
1
1,011
6,3,66 333366666,3
5,6,
5,8,
6,3,
115,91 915 999
20,55
21,99
23,22
77716,71166 7716 77777777777777777
11,44
10,00
9,8
10,1110 11
16,316 3
17,2
18,1
18,9
19 3
18,9
17,2
15,815 8
13,1
14,314 3
14,8
15,4
15,9
316 36 36 3316 3333333333333333333333
16,0
15,1
13,713 7
11,6
12,7212 72
13,13
13,53
13,83
144 044 0114 000000000000000000000
13,73
13,03
11,8111 81
10,10
11,5511 555
11,88
12,00
12,22
12 33
11,99
11,33
10,2210 22
8,6
10,510 5
10,7
10,8
10,9
10,90 9
0,8
1111
9,8
8,8 77
9,9 77
9,8
9,8
9,8
9,9 77
9,5
88,3333333333
7,7 1111
7,7 55555
8,1
8,9
8,8
8,8 66
8,3
7,6
K19
Machine shown reversed
20180321091717
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required operating temperature in the Green Hybrid system. In accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
Compact boom: 11.2 m
Grab stick: 8.5 m
Cab: Maxcab E300/260, can be elevated and moved forward hydraulically
Undercarriage: MP71
[ m ]
16
Load Ratings
Technical features and dimensions subject to change.
MPRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
19,98
227,22771
4,,44,
4,,5
5,,0
5,,555
13,,,11313131 888888888
19,8
21,0
8,8
7,8
7,6
7,799
8,3
7,799
12,311
14,6146
16,5
17,3
18,5
14,5
12,7
12,1121
12,2
8,6
9,91
10,0010001000
10,61
11,4
12,6
13,6136
14,2
14,7
15,6
15,3
14,7
13,6136
12,0
6,6,66777777
7,788
8,55
9,11
9,9777777
10,40,
11,2,
11,8,
12,12,121121
12,42,
12,82,
13,23
12,72
1111,8,8
10,50
8,7
6,666
7,7777
8,4,
9,911
9,9
10,4
10,6
10,9109
11,1
11,4
,6
7,7777777
11,5
11,1
10,3103
9,2
7,5
6,44,
7,4,
8,833
9,1
9,6
9,7
9,999
10,1
10,2
10,3
10,1044,
10,11
9,7
9,900
7,9
6,600
7,700
7,9
8,8
9,0
9,911
9,2
9,3
9,3
9,933
9,2
8889
7,777
6,6
6,,333
7,,2
8,,1
8,,88444444,
8,,44,
8,,44,
8,,44,
8,,84444,
8,,2
79
6,666,655555
6,00
6,688
7,5
7,7
7,6
7,755
7,2
6,7
6,1
K21
Machine shown reversed
20180613190256
Compact boom: 12.1 m
Grab stick: 9.5 m
Cab: Maxcab E270, hydraulically elevating
Undercarriage: MP71
[ m ]
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required operating temperature in the Green Hybrid system. In accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
17
Load Ratings
Technical features and dimensions subject to change.
MPRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
19,88919 89
27,1227
9,00,
5,05,,5 005 0
4,4,4 4
13,8,83,81 8
19,8819 88
21,00
22,1
12,812,8122 888812,8
8,88 8
12,31
14,6
16,516 5
17,3
18,0
18,5
9
6666
9,19
10,0
10,6110 6
11,4
12,6
13,6
14,214 2
14,7
15,2
15,6
6,76,7,,
7,87,7 8
8,5,
9,1,
9,7,
10,4010 40
11,21
11,81
12,12
12,4212 42
12,82
13,13
13,43
6,66,66 66
7,77,77,7
8,4
9,1
9,99 9
10,44
10,66
10,99
11,1111 11
11,44
11,66
11,77
6,4,4
47,44
8,3
9,19 1
9,6
9,7
9,9
10,110 1
10,2
10,3
4
,310,33,3
6,06,0
7,00
7,97 9
8,8
9,0
9,1
9,29 2
9,3
9,3
9,3
9,29 2
36,333,36 33
7,2,
8,1,
8,4,
8,4,8 4
8,4,
8,4,
8,4,
8,2,8 2
6,00
6,8
7,57 5
7,7
7,6
7,5
7,27 2
4,5,
5,0,
5,5,
7,8
7,6
7,9
8,38 3
14,5
12,7
12,1
12,212 2
15,3
14,7
13,6
12,012 0
13,23
12,72
11,81
10,5010 50
8,7,
11,55
11,11
10,33
9,29 2
7,5
10,111
9,7
9,0
7,97 9 6,66 6
,9, 6,7
K21
Machine shown reversed
20180321073224
Compact boom: 12.1 m
Grab stick: 9.5 m
Cab: Maxcab E270, hydraulically elevating
Undercarriage: MP71
Pylon: 1.5 m
[ m ]
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required operating temperature in the Green Hybrid system. In accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
18
Load Ratings
Technical features and dimensions subject to change.
MPRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
23,73
1919,4199
7,0,
5,15 1,5 15 115 1
5,0,
5,3,
5,8,
6,4,6 4
17,37,3317 3
1818,718,7
20,22
20,1
11111111
8,9
8,3
8,3
8,68 6
9,1
13,9,9,93,9
114,6114 6
15,5
16,5
17,3
17,5
14,2
13,0
12,712 7
12,9
12,6
11,811
12,2
12,812 8
13,4
14,0
14,6
14,9
14,214 2
12,9
11,2
9
0
10,010 00
10,0 5
10,0 7
11,1 0
11,111 44
11,1 8
12,2 2
12,2 6
,00
1
12,2 9
12,212 33
11,1 3
9,8,
7,777,
8,98 9
9,6
9,8
10,00
10,3310 3
10,66
10,99
11,22
11,4411 44
11 55
1,33111,
10,7710 77
9,9
8,5
7,47,47,47 4
8,6
9,1
9,2
9,49 4
9,6
9,8
10,0
10,210 2
10,2
10,2
6,76,6,,7
7,9
8,6
8,78 7
8,8
9,0
9,1
9,29 2
9,2
9,0
7
22
2
07,00,0,
7,6,7 6
8,2,
8,3,
8,3,
8,3,8 3
8,2,
8,0,
7,66,
20180613190815
Machine shown reversed
B19
Compact boom: 12 m banana
Grab stick: 8.5 m
Cab: Maxcab E270, hydraulically elevating
Undercarriage: MP71
[ m ]
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required operating temperature in the Green Hybrid system. In accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
19
Load Ratings
Technical features and dimensions subject to change.
MPRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
5,,7
5,,5
5,,8
6,,6 11
6,,6
17,5517
1919,019,0
20 44
10,66
9,0
8,5
8,8 55
8,7
9,1
13,88813 83,8
1414,714
15,7
16,6
7,37,7 37,
17177171
16,3
13,8
12,912 9
12,7
12,9
111,6111
12,112 1
12,7
13,4
14,0
14,614 6
15,1
15,0
14,514 5
13,6
12,2
10,3
9,,9 9
10,0 2
10,0 5
10,0100 88
11,1 3
11,1 7
12,2 2
12,2122 66
13,3 0
12,2 9
12,2122 55
11,1 8
10,0 7
9,,0
6
6
8,48 4
9,2
9,3
9,6
9,89 8
10,1
10,55
10,88
11,111 1
,33
311,311,11,11,11,11,11,11,311,
11111
1010
10
9,3
7,8
6,466,4
7,37 3
8,2
8,7
8,8
9,09 0
9,2
9,5
9,7
9,99 9
10,0
10 1
5,9555 9,,9
6,9
7,8
8,2
8,38 3
8,5
8,7
8,8
9,09 0
9,0
9,0
8,8
8,48 4
7,8
6,1,1
7,0,
7,8,87
7,9,
8,0,
8,1,
8,2,8 2
8,2,
8,1,
7,8,
7,3,7 3
6,22
6,88
7,2
7,47 4
7,44
20180321092215
Machine shown reversed
B20
Cab: Maxcab E300/260, can be elevated and moved forward hydraulically
Undercarriage: MP71
[ m ]
Compact boom: 12 m banana
Grab stick: 9.5 m
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required operating temperature in the Green Hybrid system. In accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
20
Load Ratings
Technical features and dimensions subject to change.
MPRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
9,,999,99
10,20
6,6
7,6
8,4
9,9 22
9,3
6,66,4
7,3
8,8 22
8,7
5,55,99
6,6 99
7,8 6,,1
,4
17,5517 517117
1919,0019
3,8813,83,8
1414,714 714
15,7
1,611111,
12,1
12,712 7
13,4
10,50
10,80
11,3111 3
11,71
9,6
9,8
10,110 1
10,55
8,8
9,0
9,9 22
9,5
8,2
8,3
8,8 55
8,7
7,,0
7,,8
7,,7 99
8,,0
6,6 22222
6,8
,9
6,9,6 996 96666
5,7,5 7
5,5,
5,8,
6,1,
6,6,6 6
20,44
10,610 66
9,0
8,5
8,5
8,78 7
9,1
16,6
17,8117 87 8887 87 8888888888888888888888
16,3
13,8
12,9
12,712 7
12,9
14,0
6
14,914 914,1414114,91414,9
15,1
15,0
14,5
13,613 6
12,2
10,3
12,22
12,62
12 82
12,92
12,52
11,8111 8
10,70
9,,0
10,88
11,1
11 33
11
10
1010
9,3
7,8
9,7
9,9
10 0
8,0
8,8
9,0
9,9 00
9,0
8,8
8,4
7,7 88
8,,1
8,,2
8,,8 22
8,,1
7,,8
7,,3
7,2
7,4
7,7 444
20180613190649
Machine shown reversed
B20
Compact boom: 12 m banana
Grab stick: 9.5 m
Cab: Maxcab E300/260, can be elevated and moved forward hydraulically
Undercarriage: MP71
Pylon: 1.5 m
[ m ]
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required operating temperature in the Green Hybrid system. In accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
Load Ratings
Technical features and dimensions subject to change.
MPRELIMINARY
21
0 2 4 6 8 10 12 14 16 18 20 22 24
2
4
6
-8
-6
-2
0
14
16
12
18
8
10
20
22
-10
-4
26
24
4,9
3,03333333333
3,0
3,53 5
4,1
4,6
17,317,317,3
7,66
5,8,
5,5,5 5
5,7,
6,0,
6,5,,,
17,2
18,77,718 7
9,29 2
8,6
8,5
8,6
9,09 0,
14,5,5,5
15,415 4
,4
2
1717
14,2
13,0
12,7
12,812 8
12,2
112,0111
12,61
13,2113 2
13,91
14 41
15,01
14,61
13,91
12,6112 6
10,81
9,8
10,10 1101
10,4,
10,7
11,2,
11,6,11 6
12,1
12 5
12,9,
12,6,
12,0,
11,0,11 0
9,5,
,3,33
37,33
8,2
9,0
9,39 3
9,5
9,8
10,1
10,10 44
10,7
11,0
2
11,,,
11,
10,
9,69,
8,2,
6,1
7,11
8,0
8,68 6
8,8
9,0
9,2
9,49 4
9,7
9,9
10,0
8,3
6,9,
5,6
76,77
7,67 6
8,2
8,3
8,5
8,68 6
8,8
8,9
9,0
9,09 0
8,9
8,6
8,0
7 07 07777
,99995,955
6,8
7,77
7,9
8,08 0
8,18
8,18
8,2
8,188 1
7,9
7,5
,006,
776,76 7
7,1
7,4
447,4
,227,7
7,6
20180613190709
Machine shown reversed
B20
Compact boom: 12 m banana
Grab stick: 9.5 m
Cab: Skylift 700 with Master cab, hydraulically elevating
Undercarriage: MP80
Pylon: 2.5 m
[ m ]
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required operating temperature in the Green Hybrid system. In accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
22
Dimensions M
855 M with undercarriage MP71 (tire size: 14.00-24) and E270 Maxcab with hydraulic elevation feature
3355
2060
3750
5420
6050
330
380
180
6550
2700
3850
3700
6505
7230
1860
4565
3950
3710
PRELIMINARY
3000
3850
6850
6025
2600
1860
3950 45
65
22 Technical features and dimensions subject to change.
855 M with undercarriage MP71 (tire size: 14.00-24)E300/260 Maxcab can be elevated and moved forward hydraulically
23
Dimensions
Technical features and dimensions subject to change.
M
855 M with undercarriage MP71 (tire size: 16.00-25) Maxcab E300/260, can be elevated and moved forward hydraulically, Pylon 1.5 m
PRELIMINARY
1,5m 1,5m
6020
460
180
1975
3755
5395
410
3355
5560
4070
5920
5330
3000
8330
6020
34252595
3440
5410 61
452600
3710
2795
525
3945
6100
6780
350
3355
5560
2,5m
9590
3205
3470
5870
6100
4535
6505
1860
4040
7240
5450
2,5m
970
3950
Technical features and dimensions subject to change. 23
855 M with undercarriage MP80 (tire size: 23.5-25), Maxcab with hydraulic elevation Skylift 700 and 2.5 m pylon
24
Transport dimensions MPRELIMINARY
H
L
Load boom Grab stick Transport length (L) Transport height (H)K17 10.5 m 7.5 m 15.3 m 4.00 mK19 11.2 m 8.5 m 16.0 m 4.00 mK21 12.1 m 9.5 m 16.9 m 4.00 mB19 12.0 m Banana 8.5 m 16.6 m 4.00 mB20 12.0 m Banana 9.5 m 16.5 m 4.00 m*
* Stick removed.
The following transport dimensions apply to tire sizes 14:00-24 and 16:00-25:
Note:
This catalog describes machine models, scopes of equipment of individual models, and configuration options (standard equipment and optional equipment) of the machines supplied by SENNEBOGEN Maschinenfabrik GmbH. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment and tolerances.
25Technical features and dimensions subject to change.
MNotes
PRELIMINARY
26
PRELIMINARY
27
PRELIMINARY
www.sennebogen.com
SENNEBOGEN Maschinenfabrik GmbHSennebogenstrasse 1 0 94315 Straubing, Germany
Tel. +49 9421 5 4 0 - 1 4 4 / 1 4 [email protected]
This catalog describes machine models, scopes of equipment of individual models, and configuration options (standard equipment and optional equipment) of the machinesdelivered by SENNEBOGEN Maschinenfabrik GmbH. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment and tolerances.
All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners.Please contact your local SENNEBOGEN sales partner for information concerning the equipment variants offered. Requested performance characteristics are only binding if they are expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change, and rights of advancement are reserved. © SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany.
Orde
r no.
299
210
855
M-E
-041
610-
1018
10-1
119d
u