prei ills prei steel
TRANSCRIPT
Petrosteel Technologies | General CataloguePremium mills, premium steel 1
PREMIUM MILLS, PREMIUM STEEL
Linepipe | Seamless Pipe/O.C.T.G | Stainless Steel Pipe and Tube | Steel Plate | Fitting & Flange | Wind Tower
www.petrosteel.ca2
Petrosteel Technologies | General CataloguePremium mills, premium steel 3
INTRODUCTION
COMPANY PROFILE
SERVICES
TECHNOLOGY
CONTENTS
TUBULAR PRODUCTS
LSAW Pipe
ERW Pipe
Seamless Pipe / O.C.T.G
Stainless Steel Pipe
Stainless Steel Tube
Centrifugal Casting Pipe
FLAT PRODUCTS
Carbon Steel Plate
Stainless Steel Plate
FITTING & FLANGE
Fitting
Flange
WIND TURBINE TOWER
Wind Turbine Tower
Wind Turbine Flange & Ring
JCO Process, Roll Bending
PRODUCTS
REFERENCE
CLIENTS
APPLICATIONS AND INDUSTRIES
Technical Advice
Comprehensive Logistics Services
• Packaging
• Transportation
• Insurance
• Documentation
• Customs Brokerage
After Sales Services
5
4
6
6
6
6
6
6
6
6
6
7
78
11
15
20
26
31
32
33
36
37
38
38
39
40
40
42
43
43
44
46
www.petrosteel.ca4
INTRODUCTION
Petrosteel offers a broad selection of premium steel products from leading mills worldwide.
Carbon or stainless steel, tubular or flat - all products are shipped directly from our mills to final destinations, whether warehouse or worksite.
Petrosteel specializes in serving the energy industry with a focus on oil and gas, power plants and clean energy production. Supporting EPC companies with linepipe and structural project, both on-shore and off-shore, is our main specialty.
Premium Mills, Premium Steel.
Petrosteel Technologies | General CataloguePremium mills, premium steel 5
COMPANY PROFILE
Petrosteel was founded to fill a need. Working in the oil and gas industries for many years, Petrosteel’s founders observed companies forced to compromise in materials acquisition.
Founded in 2000, Petrosteel partners with a carefully chosen selection of mills to provide the best material, manufactured to the highest standards, for every job. Affordably matching materials to job requirements is a Petrosteel specialty
ExperienceWith years of experience with companies and projects around the world,
Petrosteel brings world-class expertise to materials acquisition. Working
with mills worldwide, using up-to-date knowledge of international sup-
ply dynamics, and providing experienced metallurgical advice, Petrosteel
ensures that the best available product is supplied for every project and
application.
PricePetrosteel ships directly from the mill to the buyer, eliminating the cost
of stocking and providing significant savings to its customers. Petrosteel
packages provide all a job’s needs in a single order, all with Petrosteel’s
volume purchase pricing. Petrosteel packages combine ease, simplicity and
significant cost savings.
ChoicePetrosteel works closely with selected mills in North America, Europe, Asia
and elsewhere to provide the ultimate in supply choice.
All of Petrosteel’s manufacturers are ISO certified and all linepipe and plate
providers are API certified. Petrosteel delivers both choice and confidence.
CustomersPetrosteel specializes in supporting EPC contractors, oil and gas companies,
distributors and metal fabricators with unsurpassed procurement services.
Affordably matching materials to job requirements is our specialty
www.petrosteel.ca6
SERVICES
Petrosteel provides services throughout the entire process of materials acquisition. From expert technical advice in choosing the best material for each application, to shipping, documentation and after-sales service, we manage it all so you don’t have to.
We manage it all, so you don’t have to!
Technical AdviceWe don’t just sell material. We provide expert technical advice – based on extensive metallurgical expertise and experience to ensure that the best material is selected for each application. That includes not only choosing the proper material but also sourcing each item from the mill that best matches the job’s requirements.
If you have purchased material from another source and have experienced material failure during fabrica-tion or operations, we will work with you to perform a thorough failure investigation and analysis to de-termine the cause of the failure. We will then facilitate selection and acquisition of appropriate substitute materials.
Comprehensive Logistics ServicesWe provide all necessary logistics services for every job. Whether it’s a small job or a large piping project with tens of thousands of metric tons in materials, we handle it all from the mill to the final destination.
PackagingEach order is packaged according to the customer’s standards including preparation for export.
TransportationWe select from a range of transportation modes taking into account all project requirements shipping by sea, air, rail, truck, or a combination as needed.
InsuranceEvery shipment that leaves our mills is covered by insurance that protects everyone involved.
DocumentationAll shipping documentation is provided for seamless delivery from mill to customer. Our extensive experience in shipping worldwide means you can expect shipments to be delivered without costly delays.
Customs BrokerageWe handle all customs procedures, from obtaining export permits to clearing customs at the final destina-tion and shipping to your site.
After Sales ServicesWe stand behind our products and services. We follow up with our customers on every shipment to be sure they are satisfied with everything we have offered.
Petrosteel Technologies | General CataloguePremium mills, premium steel 7
SERVICES
PRO
DU
CTS
/ T
UBU
LAR
PRODUCTS
Whatever your industry or application in the energysector, Petrosteel has the products you need.
We supply products for a wide range of industries including oil and gas, petrochemical, electrical and wind power, water and more. Our broad range of products listed here covers applications of all kinds including construction of pipeline, fabrication of heat exchangers and pressure vessels, and construction of on- and off-shore structures.
Please contact us for assistance choosing the bestproduct for your application. We’re sure to havewhatever your specs require.
TUBULAR PRODUCTS
LSAW Pipe
ERW Pipe
Seamless Pipe / O.C.T.G
Stainless Steel Pipe
Stainless Steel Tube
Centrifugal Casting Pipe
FLAT PRODUCTS
Carbon Steel Plate
Stainless Steel Plate
FITTING & FLANGE
Fitting
Flange
WIND TURBINE
Wind Turbine Tower
Wind Turbine Flange & Ring
www.petrosteel.ca8
LSAW PIPE
We supply Longitudinal Submerged Arc Welded (LSAW) Pipe for use in a wide range of applications including linepipe, processing pipe and on-shore and off-shore structural pipes. Our product line is designed to cover a broad range of applications.
Our pipe mill in South Korea is equipped with JCO press facilities and roll bending machines, enabling it produces the widest range of LSAW linepipe design choices.
Application:
Steel pipe for transferring oil and natural gas
Pipe Specs:
CSA Z245.1-07 CAT I, II, III and Sour Service (NACE, HIC, SSC)API 5L
Plate Grades:
CSA Z245.1-07 Grade 241, 290, 359, 386, 414, 448, 483, 550, 690API 5L GR A, B, X42, X46, X52, X56, X60, X65, X70, X80 and X100
Available Sizes:
14’’ to 66 ‘’ OD with JCO pressfacilitiesWall Thickness:0.4’’ to 4’’ (10 mm to 100 mm)Max Length: 52’ (16 meters)
Application:
Low pressure carbon and low alloy steel pipe for steam, air water, oil and gas pipes
Pipe Specs:
ASTM/ASME A671, A672, A691
Plate Grades:
ASTM/ASME A515 Gr 60, 65, 70ASTM/ASME A516 Gr 60, 65, 70ASTM/ASME A387 Gr2, 11, 12, 22, 5, 9, 91
Available Sizes:
14’’ to 66 ‘’ OD press facilitiesWall Thickness:0.4’’ to 4’’ (10 mm to 100 mm)Max Length: 52’ (16 meters) 46’’ to 177’’ OD with rolling machineWall Thickness: up to 3.5’’ (90 mm)Max Length: 13.5’ (4.55 meters)
Application:
Off-shore and on-shore structures such as jackets, piles, conductors and marine construction pipes, and steel pipe for regular structures including engineering works, large buildings, bridges and steel towers.
Pipe Specs:
API2B, EN10025/10225/10113/10219, EEMUA158, BS7191, JIS G3444 STK 400, Plate Grades:
API 2W GR42, 50, 50T, 60API 2H GR42, 50A572 GR50
Available Sizes:
14’’ to 66 ‘’ OD with press bending machineWall Thickness: 0.4’’ to 4’’ (10 mm to 100 mm)Max Length: 52’ (16 meters)46” to 315’’ OD with rolling machineWall Thickness: up to 8’’ (200 mm)Max Length: 13.5’ (4.50 meters)
LSAW PIPE
LINEPIPE OFF-SHORE AND ON-SHORE STRUCTURAL PIPEPROCESSING PIPE
Petrosteel Technologies | General CataloguePremium mills, premium steel 9
LSAW PIPE
Application:
Steel pipe for NACE, HIC and SSCC applications.
Applied Specs:
MR-0175 / ISO 15156 / TM-0177 / TM-0284
Pipe Specs:
ASTM/ASME A671, A672API 5L Gr. X52 - 65CSA Z245.1 CAT I, II, III and Sour Service
Plate Grades:
ASTM/ASME A516 Gr 60, 65, 70API 5L Gr. X52 - 65CSA Z245.1 Grade 241, 290, 359, 386, 414, 448
Available Sizes:
14’’ to 66 ‘’ OD with press bending machineWall Thickness: 0.4’’ to 4’’ (10 mm to 100 mm)Max Length: 52’ (16 meters) 46’’ to 315” OD with rolling machineWall Thickness: up to 8’’ (200 mm)Max Length: 13.5” (4.50 meters)
LSAW PIPE
PIPE FOR NACE APPLICATIONS
Application:
Off-shore and on-shore wind turbine tower
Pipe Specs:
DIN 18800-7, EN 10025, EN10029, EN 10113-2
Plate Grades:
S355J0, S355J2, S355J2G3
Available Sizes:
Up to 315” OD with rolling machineWall Thickness: up to 8’’ (200 mm)Max Length: 13.5’ (4.5 meters)
PIPE FOR WIND TOWER
www.petrosteel.ca10
SIZE RANGE
OD Thinkness(mm)
mm inch 10 20 30 40 50 60 70 80 90 100355.6 14406.4 16457.2 18 16508 20
558.8 22 12609.6 24660.4 26 6711.2 28762 30
812.8 32863.6 34914.4 36965.2 381016 40
1066.8 421117.6 441168.4 461219.2 481270 50
1320.8 521371.6 541422.4 561473.2 581524 601676 66
(T)
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
40 70 100 130 160 190 220 250 280 310
Press Capacity (10,000 TON) Roll Capacity (Roll Bender)
O.D 14” ~ 66” (355.6 ~ 1,676 mm)
T 10 ~ 100 mm
L Max. 16M
O.D 46” ~ 315” (1,168 ~ 8,000 mm)
T Max. 200 mm
L Max. 4.5M
*Other grades or sizes may be available upon request.
LSAW PIPE
Petrosteel Technologies | General CataloguePremium mills, premium steel 11
ERW PIPE
Our Electric Resistance Welded (ERW) Pipes, made to API and CSA specs, are used in a wide range of application including linepipe, casing and tubing. We are partnered with a few selected mills worldwide to offer a wide range of pipe sizes to cover this broad range of applications.
Application:
Steel pipe for transferring oil and natural gas
Pipe Specs:
CSA Z245.1-07 CAT I, II, III and Sour Service (NACE, HIC, SSC)API 5L
Plate Grades:
CSA Z245.1-07 grade 241, 290, 359, 386, 414, 448, 483, 550API 5L GR A, B, X42, X46, X52, X56, X60, X65, X70 and X80
Available Sizes:
½’’ to 26’’ ODWall Thickness: 0.109’’ to 1.562’’ (2.8 mm to 39.7 mm) Max Length: 60’ Triple Random Length (18.5 m)
Application:
Steel pipe for use in oil and gas wells.
Pipe Specs:
API 5CT Plate Grades:
API 5CT grade H40, J55-K55, M65, N80, L80
Available Sizes:
Tubing: 3/4’ to 4’’ OD Wall Thickness: 0.113’’ to 0.63’’ (2.9 mm to 16 mm)
Casing: 4’’ to 20’’ ODWall Thickness: 0.205’’ to 0.635’’ (5.2 mm to 16.1 mm)
ERW PIPE
LINEPIPE CASING AND TUBING
www.petrosteel.ca12
ERW PIPE
*Other grades or sizes may be available upon request.
Size Range / Casing & Tubing
SizeOD Wall Thickness Weight
in mm in mm Ib/ft kg/m
3/41.05 26.7 0.113 2.9 1.13 1.7
1.05 26.7 0.154 3.9 1.48 2.19
11.315 33.4 0.133 3.4 1.68 2.52
1.315 33.4 0.179 4.5 2.17 3.21
1 1/4
1.66 42.2 0.125 3.2 2.05 3.08
1.66 42.2 0.14 3.6 2.27 3.43
1.66 42.2 0.191 4.9 3 4.51
1 1/2
1.9 48.3 0.125 3.2 2.37 3.56
1.9 48.3 0.145 3.7 2.72 4.07
1.9 48.3 0.2 5.1 3.63 5.43
1.9 48.3 0.25 6.4 4.41 6.6
1.9 48.3 0.3 7.6 5.13 7.63
2
2.375 60.3 0.167 4.2 3.94 5.81
2.375 60.3 0.19 4.8 4.44 6.57
2.375 60.3 0.254 6.5 5.76 8.62
2.375 60.3 0.295 7.5 6.56 9.77
2.375 60.3 0.336 8.5 7.32 10.86
2 1/2
2.875 73 0.217 5.5 6.17 9.16
2.875 73 0.276 7 7.67 11.39
2.875 73 0.308 7.8 8.45 12.54
2.875 73 0.34 8.6 9.21 13.66
2.875 73 0.392 10 10.4 15.54
2.875 73 0.44 11.2 11.45 17.07
3
3.5 88.9 0.216 5.5 7.58 11.31
3.5 88.9 0.254 6.5 8.81 13.21
3.5 88.9 0.289 7.3 9.92 14.69
3.5 88.9 0.375 9.5 12.53 18.6
3.5 88.9 0.43 10.9 14.11 20.97
3.5 88.9 0.476 12.1 15.39 22.92
3.5 88.9 0.53 13.5 16.83 25.1
3 1/2
4 101.6 0.226 5.7 9.12 13.48
4 101.6 0.262 6.7 10.47 15.68
4 101.6 0.33 8.4 12.95 19.31
Tubing
SizeOD Wall Thickness Weight
in mm in mm Ib/ft kg/m
3 1/2
4 101.6 0.415 10.5 15.9 23.59
4 101.6 0.5 12.7 18.71 27.84
4 101.6 0.61 15.5 22.11 32.91
4 101.6 0.226 5.7 9.12 13.48
4 101.6 0.262 6.7 10.47 15.68
4 101.6 0.33 8.4 12.95 19.31
4 101.6 0.415 10.5 15.9 23.59
4 101.6 0.5 12.7 18.71 27.84
4 101.6 0.61 15.5 22.11 32.91
4
4.5 114.3 0.271 6.9 12.25 18.27
4.5 114.3 0.337 8.6 15 22.42
4.5 114.3 0.38 9.7 16.77 25.02
4.5 114.3 0.43 10.9 18.71 27.79
4.5 114.3 0.5 12.7 21.38 31.82
4.5 114.3 0.56 14.2 23.59 35.05
4.5 114.3 0.63 16 26.06 38.79
SizeOD Wall Thickness Weight
in mm in mm Ib/ft kg/m
4
4.5 114.3 0.205 5.2 9.41 13.99
4.5 114.3 0.224 5.7 10.24 15.27
4.5 114.3 0.25 6.4 11.36 17.03
4.5 114.3 0.29 7.4 13.05 19.51
4.5 114.3 0.337 8.6 15 22.42
6
6.625 168.3 0.288 7.3 19.51 28.98
6.625 168.3 0.352 8.9 23.6 34.98
6.625 168.3 0.417 10.6 27.67 41.22
6.625 168.3 0.475 12.1 31.23 46.61
8
8.625 219.1 0.264 6.7 23.6 35.09
8.625 219.1 0.304 7.7 27.04 40.14
8.625 219.1 0.352 8.9 31.13 46.13
8.625 219.1 0.4 10.2 35.17 52.55
8.625 219.1 0.45 11.4 39.33 58.39
8.625 219.1 0.5 12.7 43.43 64.64
8.625 219.1 0.557 14.1 48.04 71.28
10
10.75 273.1 0.279 7.1 31.23 46.57
10.75 273.1 0.35 8.9 38.91 57.99
10.75 273.1 0.4 10.2 44.26 66.13
10.75 273.1 0.45 11.4 49.55 73.57
10.75 273.1 0.495 12.6 54.26 80.94
10.75 273.1 0.545 13.8 59.45 88.24
10.75 273.1 0.595 15.1 64.59 96.07
10.75 273.1 0.672 17.1 72.4 107.95
10.75 273.1 0.734 18.6 78.59 116.73
10.75 273.1 0.797 20.2 84.8 125.98
16
16 406.4 0.375 9.5 62.64 92.98
16 406.4 0.438 11.1 72.86 108.2
16 406.4 0.495 12.6 82.05 122.36
16 406.4 0.656 16.7 107.6 160.49
20
20 508 0.438 11.1 91.59 136.01
20 508 0.5 12.7 104.23 155.12
20 508 0.635 16.1 131.45 195.3
Casing
Petrosteel Technologies | General CataloguePremium mills, premium steel 13
ERW PIPE
Size Range / Linepipe
SizeOD Wall Thickness
in mm in mm
1/2
0.84 21.3 0.109 2.8
0.84 21.3 0.147 3.7
0.84 21.3 0.294 7.5
3/4
1.05 26.7 0.113 2.9
1.05 26.7 0.154 3.9
1.05 26.7 0.308 7.8
1
1.315 33.4 0.133 3.4
1.315 33.4 0.179 4.5
1.315 33.4 0.358 9.1
1 1/4
1.66 42.2 0.14 3.6
1.66 42.2 0.191 4.9
1.66 42.2 0.382 9.7
1 1/2
1.9 48.3 0.145 3.7
1.9 48.3 0.2 5.1
1.9 48.3 0.4 10.2
2
2.375 60.3 0.083 2.1
2.375 60.3 0.109 2.8
2.375 60.3 0.125 3.2
2.375 60.3 0.141 3.6
2.375 60.3 0.154 3.9
2.375 60.3 0.172 4.4
2.375 60.3 0.188 4.8
2.375 60.3 0.218 5.5
2.375 60.3 0.25 6.4
2.375 60.3 0.281 7.1
2.375 60.3 0.436 11.1
2 1/2
2.875 73 0.083 2.1
2.875 73 0.109 2.8
2.875 73 0.125 3.2
2.875 73 0.141 3.6
2.875 73 0.156 4
2.875 73 0.172 4.4
2.875 73 0.188 4.8
2.875 73 0.203 5.2
2.875 73 0.216 5.5
2.875 73 0.25 6.4
2.875 73 0.276 7
2.875 73 0.552 14
3
3.5 88.9 0.083 2.1
3.5 88.9 0.109 2.8
3.5 88.9 0.125 3.2
3.5 88.9 0.141 3.6
SizeOD Wall Thickness
in mm in mm
3
3.5 88.9 0.156 4
3.5 88.9 0.172 4.4
3.5 88.9 0. 188 4.8
3.5 88.9 0.216 5.5
3.5 88.9 0.25 6.4
3.5 88.9 0.281 7.1
3.5 88.9 0.3 7.6
3.5 88.9 0.6 15.2
3 1/2
4 101.6 0.083 2.1
4 101.6 0.109 2.8
4 101.6 0.125 3.2
4 101.6 0.141 3.6
4 101.6 0.156 4
4 101.6 0.172 4.4
4 101.6 0.188 4.8
4 101.6 0.226 5.7
4 101.6 0.25 6.4
4 101.6 0.281 7.1
4 101.6 0.318 8.1
4
4.5 114.3 0.083 2.1
4.5 114.3 0.125 3.2
4.5 114.3 0.141 3.6
4.5 114.3 0.156 4
4.5 114.3 0.172 4.4
4.5 114.3 0.188 4.8
4.5 114.3 0.203 5.2
4.5 114.3 0.219 5.6
4.5 114.3 0.237 6
4.5 114.3 0.25 6.4
4.5 114.3 0.281 7.1
4.5 114.3 0.312 7.9
4.5 114.3 0.337 8.6
4.5 114.3 0.438 11.1
4.5 114.3 0.531 13.5
4.5 114.3 0.674 17.1
5
5.563 141.3 0.083 2.1
5.563 141.3 0.125 3.2
5.563 141.3 0.156 4
5.563 141.3 0.188 4.8
5.563 141.3 0.219 5.6
5.563 141.3 0.258 6.6
5.563 141.3 0.281 7.1
SizeOD Wall Thickness
in mm in mm
5
5.563 141.3 0.312 7.9
5.563 141.3 0.344 8.7
5.563 141.3 0.375 9.5
5.563 141.3 0.5 12.7
5.563 141.3 0.625 15.9
5.563 141.3 0.75 17.1
6
6.625 168.3 0.083 2.1
6.625 168.3 0.109 2.8
6.625 168.3 0.125 3.2
6.625 168.3 0.1 41 3.6
6.625 168.3 0.156 4
6.625 168.3 0.172 4.4
6.625 168.3 0.188 4.8
6.625 168.3 0.203 5.2
6.625 168.3 0.219 5.6
6.625 168.3 0.25 6.4
6.625 168.3 0.28 7.1
6.625 168.3 0.312 7.9
6.625 168.3 0.344 8.7
6.625 168.3 0.375 9.5
6.625 168.3 0.432 11
6.625 168.3 0.5 12.7
6.625 168.3 0.562 14.3
6.625 168.3 0.625 15.9
6.625 168.3 0.719 18.3
6.625 168.3 0.75 19.1
6.625 168.3 0.864 21.9
6.625 168.3 0.875 22.2
8
8.625 219.1 0.125 3.2
8.625 219.1 0.156 4
8.625 219.1 0.188 4.8
8.625 219.1 0.203 5.2
8.625 219.1 0.219 5.6
8.625 219.1 0.25 6.4
8.625 219.1 0.277 7
8.625 219.1 0.312 7.9
8.625 219.1 0.322 8.2
8.625 219.1 0.344 8.7
8.625 219.1 0.375 9.5
8.625 219.1 0.438 11.1
8.625 219.1 0.5 12.7
8.625 219.1 0.562 14.3
SizeOD Wall Thickness
in mm in mm
8
8.625 219.1 0.625 15.9
8.625 219.1 0.719 18.3
8.625 219.1 0.75 19.1
8.625 219.1 0.812 20.6
8.625 219.1 0.875 22.2
8.625 219.1 1 25.4
10
10.75 273.1 0.156 4
10.75 273.1 0.188 4.8
10.75 273.1 0.203 5.2
10.75 273.1 0.219 5.6
10.75 273.1 0.25 6.4
10.75 273.1 0.279 7.1
10.75 273.1 0.307 7.8
10.75 273.1 0.344 8.7
10.75 273.1 0.365 9.3
10.75 273.1 0.438 11.1
10.75 273.1 0.5 12.7
10.75 273.1 0.562 14.3
10.75 273.1 0.625 15.9
10.75 273.1 0.719 18.3
10.75 273.1 0.812 20.6
10.75 273.1 0.875 22.2
10.75 273.1 0.938 23.8
10.75 273.1 1 25.4
10.75 273.1 1.25 31.8
12
12.75 323.9 0.172 4.4
12.75 323.9 0.188 4.8
12.75 323.9 0.203 5.2
12.75 323.9 0.219 5.6
12.75 323.9 0.25 6.4
12.75 323.9 0.281 7.1
12.75 323.9 0.312 7.9
12.75 323.9 0.33 8.4
12.75 323.9 0.344 8.7
12.75 323.9 0.375 9.5
12.75 323.9 0.406 10.3
12.75 323.9 0.438 11.1
12.75 323.9 0.5 12.7
12.75 323.9 0.562 14.3
12.75 323.9 0.625 15.9
12.75 323.9 0.688 17.5
12.75 323.9 0.75 19.1
www.petrosteel.ca14
ERW PIPE
Size Range / Pipeline
SizeOD Wall Thickness
in mm in mm
12
12.75 323.9 0.812 20.6
12.75 323.9 0.875 22.2
12.75 323.9 0.938 23.8
12.75 323.9 1 25.4
12.75 323.9 1.062 27
12.75 323.9 1.125 28.6
12.75 323.9 1.25 31.8
14
14 355.6 0.188 4.8
14 355.6 0.203 5.2
14 355.6 0.21 5.3
14 355.6 0.219 5.6
14 355.6 0.25 6.4
14 355.6 0.281 7.1
14 355.6 0.312 7.9
14 355.6 0.344 8.7
14 355.6 0.375 9.5
14 355.6 0.406 10.3
14 355.6 0.438 11.1
14 355.6 0.469 11.9
14 355.6 0.5 12.7
14 355.6 0.562 14.3
14 355.6 0.625 15.9
14 355.6 0.688 17.5
14 355.6 0.75 19.1
14 355.6 0.812 20.6
14 355.6 0.875 22.2
14 355.6 0.938 23.8
14 355.6 1 25.4
14 355.6 1.062 27
14 355.6 1.125 28.6
14 355.6 1.25 31.8
16
16 406.4 0.188 4.8
16 406.4 0.203 5.2
16 406.4 0.219 5.6
16 406.4 0.25 6.4
16 406.4 0.281 7.1
16 406.4 0.312 7.9
16 406.4 0.344 8.7
16 406.4 0.375 9.5
16 406.4 0.406 10.3
16 406.4 0.438 11.1
16 406.4 0.469 11.9
SizeOD Wall Thickness
in mm in mm
16
16 406.4 0.5 12.7
16 406.4 0.562 14.3
16 406.4 0.625 15.9
16 406.4 0.688 17.5
16 406.4 0.75 19.1
16 406.4 0.812 20.6
16 406.4 0.875 22.2
16 406.4 0.938 23.8
16 406.4 1 25.4
16 406.4 1.062 27
16 406.4 1.125 28.6
16 406.4 1.188 30.2
16 406.4 1.25 31.8
18
18 457 0.188 4.8
18 457 0.219 5.6
18 457 0.25 6.4
18 457 0.281 7.1
18 457 0.312 7.9
18 457 0.344 8.7
18 457 0.375 9.5
18 457 0.406 10.3
18 457 0.438 11.1
18 457 0.469 11.9
18 457 0.5 12.7
18 457 0.562 14.3
18 457 0.625 15.9
18 457 0.688 17.5
18 457 0.75 19.1
18 457 0.812 20.6
18 457 0.875 22.2
18 457 0.938 23.8
18 457 1 25.4
18 457 1.062 27
18 457 1.125 28.6
18 457 1.188 30.2
18 457 1.25 31.8
20
20 508 0.219 5.6
20 508 0.25 6.4
20 508 0.281 7.1
20 508 0.312 7.9
20 508 0.344 8.7
20 508 0.375 9.5
SizeOD Wall Thickness
in mm in mm
20
20 508 0.375 9.5
20 508 0.406 10.3
20 508 0.438 11.1
20 508 0.469 11.9
20 508 0.5 12.7
20 508 0.562 14.3
20 508 0.625 15.9
20 508 0.688 17.9
20 508 0.75 19.1
20 508 0.812 20.6
20 508 0.875 22.2
20 508 0.938 23.8
20 508 1 25.4
20 508 1.062 27
20 508 1.125 28.6
20 508 1.188 30.2
20 508 1.25 31.8
20 508 1.312 33.3
20 508 1.375 34.9
22
22 559 0.219 5.6
22 559 0.25 6.4
22 559 0.281 7.1
22 559 0.312 7.9
22 559 0.344 8.7
22 559 0.375 9.5
22 559 0.406 10.3
22 559 0.438 11.1
22 559 0.469 11.9
22 559 0.5 12.7
22 559 0.562 14.3
22 559 0.625 15.9
22 559 0.688 17.5
22 559 0.75 19.1
22 559 0.812 20.6
22 559 0.875 22.2
22 559 0.938 23.8
22 559 1 25.4
22 559 1.062 27
22 559 1.125 28.6
22 559 1.188 30.2
22 559 1.25 31.8
22 559 1.312 33.3
SizeOD Wall Thickness
in mm in mm
22
22 559 1.375 34.9
22 559 1.438 36.5
22 559 1.5 38.1
24
24 610 0.25 6.4
24 610 0.281 7.1
24 610 0.312 7.9
24 610 0.344 8.7
24 610 0.375 9.5
24 610 0.406 10.3
24 610 0.438 11.1
24 610 0.469 11.9
24 610 0.5 12.7
24 610 0.562 14.3
24 610 0.625 15.9
24 610 0.688 17.5
24 610 0.75 19.1
24 610 0.812 20.6
24 610 0.875 22.2
24 610 0.938 23.8
24 610 1 25.4
24 610 1.062 27
24 610 1.125 28.6
24 610 1.188 30.2
24 610 1.25 31.8
24 610 1.312 33.3
24 610 1.375 34.9
24 610 1.438 36.5
24 610 1.5 38.1
24 610 1.562 39.7
26
26 660 0.281 7.1
26 660 0.312 7.9
26 660 0.344 8.7
26 660 0.375 9.5
26 660 0.406 10.3
26 660 0.438 11.1
26 660 0.469 11.9
26 660 0.5 12.7
26 660 0.562 14.3
26 660 0.625 15.9
26 660 0.688 17.5
26 660 0.75 19.1
26 660 0.812 20.5
Petrosteel Technologies | General CataloguePremium mills, premium steel 15
SEAMLESS PIPE | O.C.T.G
Petrosteel has well-established relationships with mill and the experience necessary to supply all your tubular needs on time, wherever you need them. Through the years we have developed supply paths that provide the most cost effective solution for any O.C.T.G. or other seamless pipe need in a wide variety of applications.
Seamless Pipe | O.C.T.G
OIL COUNTRY TUBULAR GOODS (O.C.T.G) HIGH PRESSURE & HIGH/LOW TEMPERATURE SERVICE PIPE
Application:Casing, tubing and drill pipes for use in oil and gas wells.
Pipe Specs:API 5CT casing and tubing, API 5D drill pipe
Pipe Grades: Casing H40, J55-K55, N80, L80 (1), C95, P110 Tubing H40, J55-K55, N80, L80 (1), C95, P110Drill Pipes E75, X95, G105, S135
Available Sizes:OD from 3/4’’ to 7’’ (26.67 mm to 177.80 mm)
Casing Thread:Available in plain end, short thread and cou-pling (S.T.C), long thread and coupling (L.T.C) and buttress threaded and coupled (B.T.C)
Tubing Thread: Available in plain end, NUE (non-upset ends) and EUE (external upset ends)
Drill Pipe Thread: Available in plain end, EU (external upset),IU (internal upset) and IEU(internal &external upset)
Application:Heat exchangers, boilers, furnaces and condensers
Pipe Specs:ASTM A 106, ASTM A179, A192, A209ASTM A210, ASTM A213ASTM A333, ASTM A334, ASTM A335ASTM A200, ASTM A199
Pipe Grades: ASTM A 106 Gr. A, B, CASTM A199 Gr. T4, T5, T11, T21, T22ASTM A200 Gr. T4, T5, T7, T11, T21, T22ASTM A209 Gr. T1, T1A, T1BASTM A210 Gr. A1, CASTM A213 Gr. T2, T5, T5b, T5c, T11, T12, T17, T21, T22ASTM A335 Gr. P1, P2, P5, P11, P12, P22ASTM A333 Gr. 1, 1/6, 6A, 3, 7ASTM A333 Gr. 1,6
Available Sizes:OD from ¾’’ to 24’’Wall Thickness: 0.102’’ to 4’’ (2.6 to 100 mm)
LINEPIPE
MECHANICAL PIPE (CHROMOLY)
Application:Seamless pipe for transferring oil and natural gas
Pipe Specs:CSA Z245.1-07 CAT I, II, III and Sour Service (NACE, HIC, SSC), API 5L
Pipe Grades: Gr. 241, 290, 359, 386, 414, 448, 483Gr. A, A25 C1, B, X42 to X70 Available Sizes:OD from 3/4’’ to 24’’WT: 0.102’’ to 4’’ (2.6 to 100 mm)
Application:Seamless pipe used for equipments, components and tools in oil and gas industries Pipe Specs:ASTM A519
Pipe Grades: 4130 (L80, P110, Q125)4140 (L80, P110, Q125)
Available Sizes:OD from 3/4’’ to 24’’Wall Thickness: 0.102’’ to 4’’ (2.6 to 100 mm)
www.petrosteel.ca16
• Tubing and casing plain ends
• Tubing ends: N.U.E
• Tubing ends: E.U.E.
• Casing threads: Short (S.T.C.), long (L.T.C.) and buttress (B.T.C.)
Special threads on request
Outside diameter Plain ends H40 J55 - K55 N80 L80(1) C95 P110
1.050 “ 26.67 mm •
1.315” 33.40 mm •
1.660” 42.16 mm •
1.900” 48.26 mm •
2.063” 52.40 mm •
2.3/8” 60.30 mm • • • • • • • •
2.7/8” 73.00 mm • • • • • • • •
3.1/2” 88.90 mm • • • • • • • •
4” 101.60 mm • • • • • • • •
4.1/2” 114.30 mm • • • • • • • • •• •• ••
5” 127.00 mm • • • • • • •
5.1/2” 139.70 mm • • • • • • •
6.5/8” 168.30 mm • • •
7” 177.80 mm • • •
O.C.T.G | CASING & TUBING
Production Range / Casing and Tubing
*Other grades or sizes may be available upon request.
Petrosteel Technologies | General CataloguePremium mills, premium steel 17
O.C.T.G | DRILL PIPE
Size Range / Drill Pipe
*Other grades or sizes may be available upon request.
Outside diameterWall Thikness (mm, inch)
Min. Max.
mm NPS Inches (“) mm Inches (“) mm Inches (“)
26.7 26.9 3/4" 1.050 2.6 0.102 6.3 0.248
28 1.102 2.6 0.102 6,3 0.248
30.0 1.181 2.6 0.102 7.1 0.280
31.8 1.250 2.6 0.102 7.1 0.280
33.4 33.7 1" 1.315 2.6 0.102 8.0 0.315
35.0 1.378 2.6 0.102 8.0 0.315
38.0 38.1 1.496 1.5 2.6 0.102 8.8 0.346
42.2 42.4 1.1/4" 1.660 1.669 2.6 0.102 8.8 0.346
44.5 1.750 2.6 0.102 10.0 0.394
48.3 1.1/2” 1.900 2.6 0.102 10.0 0.394
50.8 51.0 2000 2.008 2.6 0.102 10.0 0.394
54.0 2.126 2.6 0.102 11.0 0.433
57.0 2.254 2.9 0.114 11.0 0.433
60.3 63.5 2" 2.375 2.480 2.500 2.9 0.114 11.0 0.433
70.0 2.756 2.9 0.114 11.0 0.433
73.0 2 1/2” 2.875 2.9 0.114 11.0 0.433
76.1 76.2 2.996 3.000 2.9 0.114 12,5 0.492
82.5 3.258 3.2 0.126 14.2 0.559
88.9 3” 3.500 3.2 0.126 14.2 0.559
95.0 98.0 3.740 3.858 3.6 0.142 14.3 0.563
101.6 3 1/2” 4.000 3.6 0.142 16.0 0.630
108.0 4.252 3.6 0.142 16.0 0.630
114.3 4” 4.500 3.6 0.142 16.0 0.630
121.0 4.764 4.0 0.157 16.0 0,630
127.0 5.000 4.0 0.157 16.0 0.630
133.0 5.236 4.0 0.157 16.0 0.630
139.7 5.500 4.0 0,157 16.0 0.630
141,3 5” 5.563 4.0 0.157 16.0 0.630
152.4 6.000 4.0 0.157 16.0 0.630
159.0 6.260 4.0 0.157 16.0 0.630
165.1 168.3 6" 6.500 6,625 4.0 0.157 16.0 0.630
177.8 7.000 8.0 0.315 16.0 0.630
www.petrosteel.ca18
Outsi
de D
iamet
er
Wal
l Thi
nkne
ss(in
ch)
0.102
0.1
14
0.126
0.1
42
0.157
0.1
77 0.
197
0.220
0.2
48 0.
280
0.315
0.34
6 0.3
74
0.394
0.4
13
0.433
0.4
72
0.512
0.5
59
0.591
0. 63
0
Wal
l Thi
nkne
ss(m
m)
inch
nps
mm
2.62.9
3.23.6
4.04.5
5.05.6
6.37.1
8.08.8
9.510
.010
.511
.012
.013
.014
.215
16
1.051
3/4"
26.7
- 26.9
1.181
30
.0
1.250
31
,8
1.315
1"33
.4 -
33.7
1.378
1.49
635
.0 -
38.0
1.661
1.66
91.1
/4”
42.2
- 42
.4
1.750
44
.5
1.900
1.1/2
"48
.3
2.000
2.00
8 50
.8 - 5
1.0
2.126
54
.0
2.254
57
.0
2.375
2.48
0 2.5
002”
60.0
63.0
63.5
2.756
2.79
5
70.0
71.0
2.875
2.1/2
"73
.0
2.953
2.99
6 3.0
00
75.0
76.1
76.2
3.150
3.25
8
80.0
82.5
3.346
3.50
0 3.5
433"
85.0
88.9
90.0
3.740
95
.0
3.937
4.00
0
100.0
101
.6
4.173
4.25
2
106.0
108
.0
4.409
4,50
04"
112.0
114
.3
4.646
4.76
4
118.0
121
.0
4,921
5.00
0
125.0
127
.0
5.197
5.23
6
132.0
133
.0
5.500
5.51
2
139.7
140
.0
5.563
5"14
1.3
5.906
6.00
0
150.0
152
.4
6.260
6.29
9
159.0
160
.0
6.500
6.62
5 6.6
936"
165.1
168
.3 17
0
7.000
7.08
7
177.8
180
.0
Size
Ran
ge /
Hot
Fin
ishe
d Se
amle
ss P
ipe
SEAMLESS PIPE | HOT FINISHED
Othe
r size
s up
to 2
0” m
ay b
e av
aila
be u
opn
requ
est
Petrosteel Technologies | General CataloguePremium mills, premium steel 19
Outsi
de D
iamet
erW
all T
hink
ness
(inch
)0.0
39
0.059
0.0
71
0.079
0.08
7 0.0
91 0.
093
0.098
0.1
02
0.104
0.11
0 0.1
14 0.
118
0.126
0.1
28
0.138
0.1
42
0.144
0.1
57
0.159
0.17
7 0.1
91 0.
197
0.21
3 0.
217
0.22
0 0.2
36 0.
248
0.256
0.2
76 0.
280
0.29
5 0.
315
0.34
6 0.3
54
0.394
0.43
3 0.4
72
0.492
0.5
51
Wal
l Thi
nkne
ss(m
m)
inch
mm
1 1.5
1.8
2.0
2.2
2.3
2.35
2.5
2.6
2.65
2.8
2.9
3.0
3.2
3.25
3.5
3.6
3.65
4.0
4.05
4.5
4.85
5.0
5.4
5.5
5.6
6.0
6.3
6.5
7.0
7.1
7.5
8.0
8.8
9 10
11
12
12
.5
140.4
7212
0.551
14
0.5
9115
0.6
30
16
0.677
17
,2
0.709
18
0.7
50 - 3
/4"
19,05
0.7
87
20
0.827
21
0.8
39
21.3
0.8
66
22
0.984
25
1.0
24
26
1.059
26
,9
1.102
28
1.1
81
30
1.250
-1.1/
4"
31.75
1.2
60
32
1.327
33
.7
1.378
35
1.5
00-1
.1/2"
38
.1
1.575
40
1.6
54
42
1.669
42
.4
1.752
44
.5
1.772
45
1.8
90
48
1.902
48
.3
1.969
50
2.008
51
2.1
26
54
2.165
55
2.2
44
57
2.362
60
2.3
74
60.3
2.4
80
63
2.500
63
.5
2.559
65
2.5
98
66
2.756
70
2.9
53
75
2.996
76
.1
3.150
80
3.2
48
82.5
3.3
46
85
3,500
88
.9
3,543
90
3,7
40
95
3,937
10
0 4.0
00
101.6
4.2
52
108
4.331
11
0 4.5
00
114.3
4.7
24
120
Size
Ran
ge /
Cold
Dra
wn
Seam
less
Pip
e
SEAMLESS PIPE | COLD DRAWN FINISHED
www.petrosteel.ca20
STAINLESS STEEL PIPE | SEAMLESS
Stainless steel pipe and tube resist corrosion and oxidation, withstand high temperatures, provide cleanliness with low maintenance costs, and won’t interact with a wide variety of materials.
This specification covers seamless and welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.
ASTM A312 / A312M• ASTM A312 / A312M, Stainless steel industrial seamless pipe
Stainless Steel Seamless Pipe
Application:
High-temperature and general corrosive service
Pipe Specs:
304,304L, 304H, 316, 316L, 316Ti, 316H, 321, 321H, 317, 317L, 347, 347H, 310S, 310H, 904L, S31803, S32205, S32750, S30432
Available Sizes:
OD from 1/4’’ to 16’’Wall Thickness: 0.0196’’ up to 1.378’’
Petrosteel Technologies | General CataloguePremium mills, premium steel 21
DN NPS WT(in) 0.02 0.03 0.04 0.05 0.06 0.06 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.18 0.20 0.22 0.24 0.26 0.28 0.30 0.31 0.33 0.35 0.37 0.39 0.41 0.43 -.47 0.51 0.55 0.63 0.75 0.91 1.10 1.38
0.5 0.8 1 1.24 1.6 1.65 2 2.3 2.5 2.77 3 2.3 2.5 2.73 4 2.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 12 13 14 16 19 23 28 35
6
8
6 1/8 10.3
12.7 9000 6000
8 1/4 13.7
15.9 16000 10000
10 3/8 17.2
19.1
15 1/2 21.3
15.4 22000
20 3/4 26.7
31.8
25 1 33.4 16000
38.1 6000
32 1 1/4
42.2
44.5 10000
40 1 1/2
48.3 12000
50.8 16000
50 2 60.3
63.5
65 2 1/2
73
76.5
80 3 88.9 16000
90 3 1/2
102
100 4 114
127 13000
125 5 141
152
150 6 168
178 12000 8000
203 10000
200 8 219
254
250 10 273 8000 6000
300 12 324
350 14 356
400 16 406
wt(mm)
OD(mm)
16000
9000 6000
10000
10000
22000
16000
6000
16000
16000
16000
12000
12000
8000
8000
6000
13000
Size Range / Stainless Steel Seamless Pipe and Tube
STAINLESS STEEL PIPE | SEAMLESS
*Other grades or sizes may be available upon request.
www.petrosteel.ca22
Stainless Steel Welded Pipe
STAINLESS STEEL PIPE | WELDED
ASTM A312 / A312M
Application:
High-temperature and general corrosive service
Pipe Specs:
304,304L, 304H, 316, 316L, 316Ti, 316H, 321, 321H, 317, 317L, 347, 347H, 309, 309S, 310, 310S, 310H.
Available Sizes:
OD from 1/8’’ to 80’’Wall Thickness: Up to 60 mm (2.36’’)
• ASTM A312 / A312M, Stainless steel industrial welded pipe
This specification covers seamless and welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.
Petrosteel Technologies | General CataloguePremium mills, premium steel 23
STAINLESS STEEL PIPE | WELDED
ASTM A358 / A358M• ASTM A358 / A358M, Stainless steel industrial welded pipe
Class1:Pipe is double welded by processes employing filler metal in all passes and are completelyradiographed.
Class2:Pipe is double welded by processes employing filler metal in all passes without radiography
Class3:Pipe is single welded by processes employing filler metal in all passes and are completelyradiographed.
Class4:Same as Class 3, except that the weld pass exposed to the inside pipe surface may be made without the addition of filler metal.
Class5:Pipe is double welded by processes employing filler metal in all passes and is spot radiographed.
Application:
High-temperature and general corrosive service
Pipe Grades:
304,304L, 304H, 316, 316L, 316H, 321, 321H, 317, 317L, 347, 347H, 309, 309S, 310, 310S.
Available Sizes:
Any size can be provided but this process is usually used sizes of NPS 8’’ and upper.
This specification covers electric-fusion-welded austenitic chromium-nickel stainless steel pipe suitable for corrosive orhigh-temperature service, or both, or for general applications.
The pipe comes in five classes:
www.petrosteel.ca24
STAINLESS STEEL PIPE | WELDED
Size
Ran
ge /
Sta
inle
ss S
teel
wel
ded
Pipe
/ AS
TM A
312
/ A31
2M
NBNo
m.
pipe
Size
Outsi
deDi
amet
eSc
hedu
le 5
Sche
dule
10Sc
hedu
le 40
Wall
thick
ness
Weig
htW
all th
ickne
ssW
eight
Wall
thick
ness
Weig
ht
inch
mm
.inc
hm
m.
Kg/ft
Kg/m
inch
mm
.Kg
/ftKg
/minc
hm
m.
Kg/ft
Kg/m
151/
20.
840
21.3
40.
065
1.65
0.24
80.
812
0.08
32.
110.
309
1.01
40.
109
2.77
0.39
21.
286
203/
41.
050
26.6
70.
065
1.65
0.31
51.
032
0.08
32.
110.
395
1.29
60.
113
2.87
0.52
11.
708
251
1.31
533
.40
0.06
51.
650.
399
1.31
00.
109
2.77
0.64
72.
121
0.13
33.
380.
773
2.53
7
321
1/4
1.66
042
.16
0.06
51.
650.
509
1.67
10.
109
2.77
0.83
22.
728
0.14
03.
561.
047
3.43
5
401
1/2
1.90
0 48
.26
0.06
51.
650.
586
1.92
30.
109
2.77
0.96
03.
150
0.14
53.
681.
250
4.10
1
502
2.37
560
.33
0.06
51.
650.
738
2.42
10.
109
2.77
1.21
53.
986
0.15
43.
911.
681
5.51
5
652
1/2
2.87
573
.03
0.08
32.
111.
141
3.74
10.
120
3.05
1.62
75.
336
0.20
35.
162.
669
8.75
5
803
3.50
088
.90
0.08
32.
111.
396
4.57
80.
120
3.05
1.99
66.
546
0.21
65.
493.
490
11.4
48
903
1/2
4.00
010
1.60
0.08
32.
111.
600
5.24
80.
120
3.05
2.29
17.
514
0.22
65.
744.
194
13.7
56
100
44.
500
114.
300.
083
2.11
1.80
45.
918
0.12
03.
052.
586
8.48
30.
237
6.02
4.96
816
.296
125
55.
563
141.
300.
109
2.77
2.92
59.
593
0.13
43.
403.
574
11.7
220.
258
6.55
6.72
722
.065
150
66.
625
168.
280.
109
2.77
3.49
411
.462
0.13
43.
404.
273
14.0
150.
280
7.11
8.73
428
.648
200
88.
625
219.
080.
109
2.77
4.56
714
.979
0.14
83.
766.
171
20.2
400.
322
8.18
13.1
4943
.129
250
1010
.750
273.
050.
134
3.40
6.98
822
.920
0.16
54.
198.
586
28.1
630.
365
9.27
18.6
3861
.131
300
1212
.750
323.
850.
156
3.96
9.65
531
.669
0.18
04.
5711
.121
36.4
780.
375
9.52
22.8
0874
.811
350
1414
.000
355.
600.
156
3.96
10.6
1434
.812
0.18
84.
7812
.781
41.9
230.
375
9.52
25.1
1282
.367
400
1616
.000
406.
400.
165
4.19
12.8
4542
.131
1.18
84.
7814
.632
47.9
940.
375
9.52
28.7
9894
.457
450
1818
.000
457.
200.
165
4.19
14.4
6747
.453
0.18
84.
7816
.483
54.0
640.
375
9.52
32.4
8410
6.54
8
500
2020
.000
508.
000.
188
4.78
18.3
3460
.135
0.21
85.
5421
.217
69.5
91.0
375
9.52
36.1
7011
8.63
8
Petrosteel Technologies | General CataloguePremium mills, premium steel 25
STAINLESS STEEL PIPE | WELDED inc
hes
mm
411
46
168
821
910
273
1232
314
355
1640
618
457
2050
822
559
2461
026
660
2871
130
762
3281
334
864
3691
438
965
401,0
1642
1,067
441,1
1846
1,168
481.2
1950
1,270
521,3
2154
1,372
561,4
2258
1,473
601,5
2462
1,575
641,6
2666
1,676
681,7
2770
1,778
721,8
2974
1,880
761,9
3078
1,981
802,0
32
PIPEDIAMETER
12
34
56
78
910
1112
1314
1516
1718
1920
2122
2324
2526
2728
2930
3132
3334
3536
3738
3940
4142
4344
4546
4748
4950
5152
5354
5556
5758
5960
WAL
L THI
CKNE
SS (m
m)
6 OR 1
2 MTR
S WITH
ONE L
ONGIT
UDINA
L WE
LD, N
O CIRC
ULAR
WELD
S
6 OR 1
2 MTR
S WITH
MUL
TIPLE
CIRCU
LAR W
ELDS,
OR W
ITH DO
UBLE
LONG
ITUDIN
AL W
ELDS
UNIT
LENGT
H TO B
E AGR
EED D
UE TO
WEIG
HT
OF SI
NGLE
PIPE
Size
Ran
ge /
Thi
ck-W
alle
d an
d La
rge
Dia
met
er S
tain
less
Ste
el w
elde
d Pi
pes
www.petrosteel.ca26
STAINLESS STEEL TUBE | SEAMLESS
Stainless steel pipe and tube resist corrosion and oxidation, withstand high temperatures, provide cleanliness with low maintenance costs, and won’t interact with a wide variety of materials.
This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes.
This specification covers standard requirements for seamless and welded austenitic steel tubing for general corrosion-resisting and low- or high-temperature service.
ASTM A213 / A213M• ASTM A213/A213M, Stainless steel boiler, superheater
and heat-exchanger seamless tube
Stainless Steel Seamless Tube
Application:
Boiler, superheater, and heat exchanger
Pipe Specs:
304,304L, 304H, 316, 316L, 316Ti, 316H, 321, 321H, 317, 317L, 347, 347H, 310, 310S, 310H, 904L.
Available Sizes:
OD from 1/8’’ to 5’’ (3.2 to 127 mm) • Wall Thickness: 0.015’’ to 0.5’’ (0.4 to 12.7 mm)
Application:
For general corrosion-resisting and low- or high-temperature service.
Tube Grades:
304,304L, 304H, 316, 316L, 316Ti, 316H, 321, 321H, 317, 317L, 310, 310S, 310H
Available Sizes:
OD from 0.187’’ to 4’’ (4.75 mm to 101.60 mm)Wall Thickness: 0.016’’ to 0.118’’ (0.4 mm to 3 mm)
ASTM A269 / A269M• ASTM A269/A269M, Stainless steel general industry seamless tube
Petrosteel Technologies | General CataloguePremium mills, premium steel 27
STAINLESS STEEL TUBE | SEAMLESS
ASTM A511 / A511M• ASTM A511 / A511M, Stainless steel mechanical seamless tube
Stainless Steel Seamless Tube
This specification covers seamless stainless tubing for use in mechanical applications where corrosion-resistant or high-temperature strength is needed.
Application:
Mechanical applications where corrosion-resistant or high-temperature strength is needed.
Tube Grades:
304,304L, 304H, 316, 316L, 316Ti, 316H, 321, 321H, 317, 317L, 347, 347H, 310, 310S, 310H
Available Sizes:
OD from ¼’’ to 12 3/4’’ • Wall Thickness: 0.02’’ to 1’’ (0.5 mm to 25.4 mm)
For size range, please refer to page 17
www.petrosteel.ca28
STAINLESS STEEL TUBE | WELDED
This specification covers welded austenitic stainless steel tubing intended for hightemperature usage such as boiler, superheater, heat exchanger, or condenser tubes.
This specification covers welded and seamless austenitic stainless steel tubing intended for low or high temperature and general corrosive service.
ASTM A249 / A249M• ASTM A249/A249M, Stainless steel boiler, superheater, heat exchanger & condenser welded tubes
ASTM A269 / A269M• ASTM A269/A269M, Stainless steel general industry welded tube
Application:
Boilers, heat exchanger, heaters or condensers.
Tube Grades:
304,304L, 316, 316L, 321, 310, 310S, 309S
Available Sizes:
OD from 1’’ to 4’’ • Wall Thickness: 0.035’’ to 0.079’’ (0.9 mm to 2 mm)
Application:
For general corrosion-resisting and low- or high-temperature service.
Tube Grades:
304,304L, 316, 316L, 321, 310, 310S, 309S
Available Sizes:
OD from 0.187’’ to 4’’ (4.75 mm to 101.60 mm) • Wall Thickness: 0.016’’ to 0.118’’ (0.4 mm to 3 mm)
Stainless Steel Welded Tube
Petrosteel Technologies | General CataloguePremium mills, premium steel 29
Application:
For use in dairy and food industries, pharmaceutical industry and other applications requiring special surface finishes.
Tube Grades:
304,304L, 316, 316L
Finish:
The following surface finishes are available: mill finish (2B), finish no. 120, finish no. 180, finish no. 320, finish no. 400, and finish no. 600.
Available Sizes:
OD from 1’’ to 5’’ (25.4 to 127 mm)Wall thickness: 0.039’’ to 0.079’’ (1 mm to 2 mm)
STAINLESS STEEL TUBE | WELDED
ASTM A270 / A270M• ASTM A270 / A270M, Stainless steel sanitary welded tube
ASTM A554/ A554M• ASTM A554 / A554M, Stainless steel ornamental welded tube
This specification covers grades of welded austenitic and ferritic austenitic stainless steel sanitary tubing.
This specification covers welded stainless steel tubing for mechanical applications whereappearance, mechanical properties, or corrosion resistance is needed.
Application:Decoration and structural services.
Tube Grades:304,304L, 316, 316L
Finish:Round Tubes: Finish no. 180, 320, 400, 600, and bright annealed (BA).Square and Rectangular Tubes: Finish no. 180
Available Sizes:Round Tubes: OD from 0.236’’ to 5’’ (6 mm to 127 mm) Wall Thickness: 0.02’’ to 0.12’’ (0.5 to 3 mm)
Square Tubes:20 x 20 mm to 150 x 150 mm Wall Thickness: 1 mm to 6 mm
Rectangular Tubes:25 x 15 mm to 120 x 80 mm Wall Thickness: 1 mm to 6 mm
www.petrosteel.ca30
Outsi
de D
iamet
erW
all T
hink
ness
(inch
)0.0
160.0
200.0
250.0
280.0
320.0
350.0
420.0
490.0
650.0
830.1
090.1
20
Wal
l Thi
nkne
ss(m
m)
inch
mm
0.40
0.51
0.64
0.71
0.81
0.89
1.07
1.24
1.65
2.11
2.77
3.05
0.281
7.14
0.295
7.5
00.3
137.9
50.3
759.5
30.3
9410
.00
0.438
11.12
0.472
12.00
0.500
12.70
0.540
13.71
0.551
14.00
0.563
14.30
0.591
15.00
0.625
15.88
0.630
16.00
0.675
17.14
0.677
17.20
0.709
18.00
0.748
19.00
0.750
19.05
0.787
20.00
0.840
21.33
0.875
22.22
0.945
24.00
0.984
25.00
1.000
25.40
1.050
26.67
1.059
26.90
1.125
28.58
1.181
30.00
1.250
31.75
1.260
32.00
1.315
33.40
1.327
33.70
1.378
35.00
1.500
38.10
1.496
38.00
1.575
40.00
1.660
42.16
1.669
42.40
1.900
48.26
1.968
50.00
2.000
50.80
2.008
51.00
2.126
54.00
2.250
57.15
2.374
60.30
2.375
60.32
2.500
63.50
Size
Ran
ge /
Stai
nles
s St
eel w
elde
d Tu
bes
STAINLESS STEEL TUBE | WELDED
Petrosteel Technologies | General CataloguePremium mills, premium steel 31
CENTRIFUGAL CASTING PIPE
Application
Petrochemical furnace tubes, reformer tubes and rollers for different industries.
Tube Grades
Heat-, corrosion- and abrasion-resistant materials are available.
Available Sizes
Petrosteel can supply cast tubes from 2 1/8” to 32”outside diameters. Individual tubes can be cast from 6’ to 15’ long.
In the centrifugal casting process molten metal is poured into a spinning die. The die can be spinning either on a vertical or horizontal axis depending on the configuration of the desired part. Tubular shapes are made with the horizontal centrifugal process.
Centrifugal Casting Pipe
www.petrosteel.ca32
SERVICES
PRO
DU
CTS
/ F
LAT
PRODUCTS
TUBULAR PRODUCTS
LSAW Pipe
ERW Pipe
Seamless Pipe / O.C.T.G
Stainless Steel Pipe
Stainless Steel Tube
Centrifugal Casting Pipe
FLAT PRODUCTS
Carbon Steel Plate
Stainless Steel Plate
FITTING & FLANGE
Fitting
Flange
WIND TURBINE
Wind Turbine Tower
Wind Turbine Flange & Ring
Petrosteel Technologies | General CataloguePremium mills, premium steel 33
CARBON AND ALLOY STEEL PLATE
Pipeline grade Plate for vessel and boiler Offshore structural steel plate Structural steel
Carbon and Alloy Steel Plate
Application:
Making pipeline for transfer-ring crude oil and natural gas in the oil and gas industries.
Plate Standard:
API 5L
Plate Grades:
5LB (L245) ~ X52 (L360) X60 (L415) ~ X70 (L485)X80 (L555) ~ X1005LB (L245) ~ X70 (L485)X80
Available Sizes:
Thickness: 6 ~ 30 mmWidth: 1600 ~ 3200 mmLength: 6000 ~ 24000 mm
Delivery Condition:*
TMCP, N, Q+T
Application:
Making boiler and pressure vessel for the oil, gas and petrochemical industries.
Plate Standard:
ASTM A515, ASTM A516, ASTM A283, ASTM A285 ASTM A537
Plate Grades:
A515 Gr. 55 ~ 70A516 Gr. 50~70 A283 Gr. A,B,CA285 Gr. A,B,CA537-C11
Available Sizes:
Thickness: 6 ~ 80 mmWidth: 1600 ~ 3200 mmLength: 6000 ~ 24000 mm
Delivery Condition:*
AR, CR, TMCP, N, N+T, Q+T, DQ/Q+T
Application:
Plate for offshore structural use.
Plate Standard:
API 2H/2W/2Y
Plate Grades:
API 2H-50, API 2W-50, API 2Y -60
Available Sizes:
Thickness: 6 ~ 60 mmWidth: 1600 ~ 3150 mmLength: 6000 ~ 24000 mm
Delivery Condition:*
AR, CR, TMCP, N
Application:
Used in bridge building and general construction.
Plate Standard:
ASTM A283, ASTM A573, ASTM A572, ASTM A36, ASTM A709
Plate Grades:
A283 Gr. CA537 Gr.70A36A572-19002, A572 Gr. 42~50A709-50-2 Z25, A709-50F-2, A709-50T-2-A, A709 Gr.50
Available Sizes:
Thickness: 6 ~ 80 mmWidth: 1600 ~ 3200 mmLength: 6000 ~ 24000 mm
Delivery Condition:*
AR, CR, TMCP, N, TMCP+T, Q+T, DQ+T
www.petrosteel.ca34
CARBON AND ALLOY STEEL PLATE
Shipbuilding plateAtmospheric corrosion resistant steel
Carbon and Alloy Steel Plate
Application:
Used to fabricate sections and floor plate for decking and stair treads in shipbuilding.
Plate Standard:
CCS, DNV, GL, LR, BV, ABS, NK, KR, RINA
Plate Grades:
A, B, D, E, A32, D32, E32, A36, D36, E36, A40, D40, E40, F32, F36
Available Sizes:
Thickness: 6 ~ 60 mmWidth: 1600 ~ 3150 mmLength: 6000 ~ 24000 mm
Delivery Condition:*
AR, CR, TMCP, N
Application:
With high resistance to atmospheric corrosion, this steel is used for steel frame structures, bridges, tanks and containers exposed to outdoor conditions.
Plate Standard:
ASTM A242, ASTM A588, ASTM A606
Plate Grades:
Cor-ten ACor-ten B
Available Sizes:
Thickness: 6 ~ 100 mmWidth: 1600 ~ 3200 mmLength: 6000 ~ 24000 mm
Delivery Condition:*
N+T, Q+T, Q
*Other grades or sizes may be available upon request.
DELIVERY CONDITION TABLE
HR Hot RolledN NormalisedTMCP Thermomechanically Controlled ProcessQ+T Quenched and TemperedCR Controlled Rolling N+T Normalised and TemperedAR As Rolled
Petrosteel Technologies | General CataloguePremium mills, premium steel 35
CARBON AND ALLOY STEEL PLATE
CARB
ON A
ND
ALLO
Y ST
EEL
PLAT
EAP
PLIC
ATIO
NPL
ATE
STAN
DARD
PLAT
E GR
ADES
AVAI
LABL
E SI
ZES
DELI
VERY
CON
DITI
ON
Pipe
line
grad
eM
akin
g pi
pelin
e fo
r tra
nsfe
rring
crud
e oi
l and
na
tura
l gas
in th
e oi
l and
ga
s ind
ustri
es.
API 5
L5L
B (L2
45) ~
X52
(L36
0)
X60
(L415
) ~ X
70 (L
485)
X80
(L555
) ~ X
100
5LB
(L245
) ~ X
70 (L
485)
X80
Thick
ness
: 6 ~
30
mm
Wid
th: 1
600
~ 32
00 m
mLe
ngth
: 600
0 ~
2400
0 m
m
TMCP
, N, Q
+T
Plat
es fo
r ves
sel a
nd b
oile
rM
akin
g bo
ilers
and
pr
essu
re ve
ssel
s for
the
oil, g
as a
nd p
etro
chem
ical
indu
strie
s
ASTM
A51
5, A
STM
A51
6, A
STM
A2
83, A
STM
A28
5 AS
TM A
537
A515
Gr. 5
5 ~
70A5
16 G
r. 50~
70
A283
Gr. A
,B,C
A285
Gr. A
,B,C
A537
-C11
Thick
ness
: 6 ~
80
mm
Wid
th: 1
600
~ 32
00 m
mLe
ngth
: 600
0 ~
2400
0 m
m
AR, C
R, T
MCP
, N, N
+T,
Q+T,
DQ/Q
+T
Offs
hore
stru
ctur
al st
eel p
late
Plat
es fo
r offs
hore
stru
c-tu
ral u
se.
API 2
H/2W
/2Y
API 2
H-50
, API
2W
-50,
API
2Y
-60
Thick
ness
: 6 ~
60
mm
Wid
th: 1
600
~ 31
50 m
mLe
ngth
: 600
0 ~
2400
0 m
m
AR, C
R, T
MCP
, N
Stru
ctur
al st
eel
Used
in b
ridge
bui
ldin
g an
d ge
nera
l con
stru
ctio
n.AS
TM A
283,
AST
M A
573,
AST
M
A572
, AST
M A
36, A
STM
A70
9A2
83 G
r. CA5
37 G
r.70
A36
A572
-190
02, A
572
Gr. 4
2~50
A709
-50-
2 Z2
5, A
709-
50F-
2, A
709-
50T-2
-A, A
709
Gr.5
0
Thick
ness
: 6 ~
80
mm
Wid
th: 1
600
~ 32
00 m
mLe
ngth
: 600
0 ~
2400
0 m
m
AR, C
R, T
MCP
, N,
TMCP
+T, Q
+T, D
Q+T
Ship
build
ing
plat
eUs
ed to
fabr
icate
sect
ions
an
d flo
or p
late
for
deck
-in
g an
d st
air t
read
s in
ship
build
ing.
CCS,
DNV
, GL,
LR, B
V, AB
S, N
K,
KR, R
INA
A, B
, D, E
, A32
, D32
, E32
, A36
, D36
, E3
6, A
40, D
40, E
40, F
32, F
36Th
ickne
ss: 6
~ 6
0 m
mW
idth
: 160
0 ~
3150
mm
Leng
th: 6
000
~ 24
000
mm
AR, C
R, T
MCP
, N
Atm
osph
eric
corro
sion
resis
tant
stee
lW
ith h
igh
resis
tanc
e to
at
mos
pher
ic co
rrosio
n th
is st
eel is
use
d fo
r ste
el fr
ame
stru
ctur
es, b
ridge
s, ta
nks
and
cont
aine
rs e
xpos
ed to
ou
tvdo
or co
nditi
ons.
ASTM
A24
2, A
STM
A58
8, A
STM
A6
06Co
r-ten
ACo
r-ten
BTh
ickne
ss: 6
~ 1
00 m
mW
idth
: 160
0 ~
3200
mm
Leng
th: 6
000
~ 24
000
mm
N+T,
Q+T,
Qv
Prod
uct R
ange
/ C
arbo
n an
d Al
loy
Stee
l Pla
te
*Oth
er g
rade
s or
size
s m
ay b
e av
aila
ble
upon
requ
est.
www.petrosteel.ca36
This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessel and for general applications.
Stainless Steel Sheet, Coil and Plate
Application:
Widely used in a variety of industries including the oil and gas, petrochemical, food and architectural industries for making parts, pipes, tubes, machines, vessels and other items that must be resistant to corrosion and temperature extremes.
Austenite:
301, 301L, 304, 304L, 304LN, 304N1, 309S, 310S, 316, 316L, 316LN, 316Ti, 317L, 321, 347
Duplex:
329 J3L (UNS S32205/S31803), 329LD
Ferrite:
409L, 410L, 429EL, 430, 430J1L, 430Ti, 436L, 439, 441, 444, 445NF, 446M. 410, 410B
Martensite:
410, 410B, 420N1, 420J2
Finish:
No.1, 2B, BA, No.3, No.4, HL, No.8.
Finish:
Thickness: 0.15 ~ 3.0 mm (Cold Rolled), Thickness: 3.0 ~ 195 mm (Hot Rolled)Width: 10.0 ~ 3,300 mm.
ASTM A240 / A480• ASTM A240/A480
*Other grades or sizes may be available upon request.
STAINLESS STEEL SHEET, COIL AND PLATE
Petrosteel Technologies | General CataloguePremium mills, premium steel 37
SERVICES
PRO
DU
CTS
/ F
ITTI
NG
& F
LAN
GE
PRODUCTS
TUBULAR PRODUCTS
LSAW Pipe
ERW Pipe
Seamless Pipe / O.C.T.G
Stainless Steel Pipe
Stainless Steel Tube
Centrifugal Casting Pipes
FLAT PRODUCTS
Carbon Steel Plate
Stainless Steel Plate
FITTING & FLANGE
Fitting
Flang
WIND TURBINE
Wind Turbine Tower
Wind Turbine Flange & Ring
www.petrosteel.ca38
FITTING & FLANGE
Our extensive range of products consists of seamless and welded fittings. Our fittings all meet ANSI and API standards and are manufactured to meet each customer’s specs.
Our extensive range of products consists of forged carbon steel and stainless steel flanges. Our flanges all meet ANSI and API standards and are manufactured to meet each customer’s specs.
Fitting Flange
Fittings Type:
Butt Weld Fittings:
LR & SR Elbows, Tees, Ecc., and Conc., Reducers & Caps Forged Fittings:
Socket Weld, Threaded fitting, Pipe nipple, Swage nipple andButt welding outlet
Standards:
ASME B16.9, ASME B16.28, and ASME B16.25ASME B16.11, and MSS-SP 97
Material and Grades:
Carbon Steel:
ASTM A234 Gr. WPBASTM A420 Gr. WPL6ASTM A105ASTM A350 Gr. LF2 Stainless Steel:
ASTM A403 WP316/316LASTM A403 WP304/304LASTM A182 F316L, 304L
Available Sizes:
Butt Weld Fitting: ½’’ to 102’’Forged Fitting: 1/8’’ to 4’’Outlet: Up to 36’’
Flanges Type:
Welding Neck, Slip On, Blind, Threaded, Socket Weld, Lap Joint, Orifice, Hub and Wind Tower flanges.
Flanges Standards:
ANSI B16.5, ANSI B16.47 Series B (API 605), ANSI B16.47 Series A (MSS SP44), ANSI B16.36
Material and Grades:
Carbon Steel:
ASTM A105, ASTM A181Stainless Steel:
ASTM A182 F316/316LASTM A182 F304/304L
Available Sizes:
½” to 374”
Class:
150 lbs to 2500 lbs.
Max. Weight of Flange:
60 MTon.
Petrosteel Technologies | General CataloguePremium mills, premium steel 39
SERVICES
PRO
DU
CTS
/ W
IND
TU
RBIN
E TO
WER
PRODUCTS
TUBULAR PRODUCTS
LSAW Pipe
ERW Pipe
Seamless Pipe / O.C.T.G
Stainless Steel Pipe
Stainless Steel Tube
Centrifugal Casting Pipe
FLAT PRODUCTS
Carbon Steel Plate
Stainless Steel Plate
FITTING & FLANGE
Fitting
Flange
WIND TURBINE
Wind Turbine Tower
Wind Turbine Flange & Ring
www.petrosteel.ca40
WIND TURBINE TOWER
Offering high energy efficiency, relatively economical construction & equipment costs per unit capacity, wind power is expected to see continued demand growth as a future-oriented energy source and North America is developing into the world’s largest wind energy market, making it an important market for Petrosteel.
We provide our customers with high quality wind towers and monopiles. We supply and deliver every one of our towers with maximum efficiency and precision.
We supply forged tower flange and ring for wind energy industry.
Wind Turbine Tower
Wind Turbine Flange & Ring
Production Process
Application:
Used in wind turbine tower
Flange Specs:
Customer’s specs
Material and Grades:
Customer’s specs
Available Sizes:
OD: Up to 374’’ • Weight: Up to 60 Tons
Petrosteel Technologies | General CataloguePremium mills, premium steel 41
SERVICES
APP
LIC
ATI
ON
S A
ND
IND
UST
RIES
TEC
HN
OLO
GY
REFR
ENC
ESC
LIEN
TS
www.petrosteel.ca42
LSAW Pipe
• Pipeline for transferring crude oil and natural gas in the oil and gas
• industries• Processing pipes in petrochemical industries and power
plants• Off-shore and on-shore structures such as jackets, piles,
conductors and construction pipes• Civil structures such as pipes for bridges and large buildings
Seamless Pipe
• O.C.T.G (Oil Country Tubular Goods)• Pipeline• Oil pipes• High pressure and temperature applications• General purpose
Stainless Steel Pipe and Tube
• Oil and gas industries• Chemical and petrochemical industries• Power plants• Energy sector industries• Pulp and paper industries• Pharmaceutical companies• Boiler and heat exchanger production• Architecture, building and construction industries• Water industries• Food industries
Steel Plate
• API plates for linepipes in the oil and gas industries• Boiler and pressure vessel plates for oil, gas and petrochemi-
cal industries• Bridge building and construction• Ship building• Off-shore structures• Civil structures• Road construction machinery
Stainless Steel Sheet, Coil and Plate
• Oil and gas industries• Chemical and petrochemical industries• Power plants• Energy sector• Pulp and paper industries• Pharmaceutical companies• Chemical tank production (several industries)• Architecture, building and construction• Water industries• Food industries• Appliances industries• Kitchenware production• Sink production• Automotive industries
Fitting and Flange
• Oil and gas industries• Chemical and petrochemical industries• Power plants• Energy sectors• Pulp and paper industries• Pharmaceutical companies• Water industries
Centrifugal Casting Pipe
• Catalyst reformer tubes for petrochemical industries• Reformer tubes for DRI plants• Rollers for steel industries• Rollers for galvanizing plants
Wind turbine tower
• Making on-shore and off-shore wind turbines.
APPLICATIONS & INDUSTRIES
Petrosteel Technologies | General CataloguePremium mills, premium steel 43
TECHNOLOY
JCO ProcessThe JCO forming process, which uses a forming press as the primary forming ag-gregate, has become more common in recent years compared with the UOE process and the four roll bending process due its greater flexibility, higher quality product and lower investment costs.
In addition to the production of thick-walled and large diameter pipes, the JCO form-ing process is excellent for producing small diameter pipe with large wall thickness, making it ideal for the production of offshore linepipe.
In the JCO process the plate – milled and crimped at the edges – is delivered to a forming press, shifted into position for bending by manipulators, and formed into an open seam pipe, using a die matched to the pipe dimension, across the entire plate length in stages. First, one side of the plate is bent to form a half-round – the “J “ in “JCO”. The plate is then shifted by a second manipulator to bring the opposite side into position to be bent in the same way, forming the “C“and then the completing the “O“. The open-seam pipe thus formed is sufficiently rounded, with plane-parallel edges, to be ready for welding.
Roll BendingIn the roll bending process the plate is formed into an open seam pipe by several passes through a 4 roll bending machine. The open edges are not formed, instead remaining straight. Once formed, the open seam pipe is transported to an edge bend-ing machine where the two longitudinal edges of the plate are crimped by rolls in a continuous process
Different steps from plate into open-seam pipe
www.petrosteel.ca44
REFERENCE
Item Project Name Grade Qty/MTon Client Year
1 SEA DRILL NO. 8 API 5L X80 PSL2 3,200 CAMERON, USA 2006-2008
2 ESCRAVOS GAS TO LIQUID ASTM A671 CC60 CL22 1,300 CHEVRON TEXACO , NIGERIA 2006
3 TOTAL LIBONDO S420 KT-40S355 KT-40.P.Z35 3,000 TOTAL E&P, FRANCE 2009
4 BRUNEI SHELL CHAM PION PHASE II BS 7191 355D & 355EM Z 3,300 SHELL BRUNEI, BRUNEI 2008-2009
5 KHALIFA STADIUM QATAR S355 G7+M (G8+M ), API 5L Gr.X65 NACE 3,300 DOHA ASIAN GAMES ORGANIZATION, QATAR 2003
6 TEGIAC TRANG FIELD DEV. H1&H4 AH(Z)36 / DH(Z)36 / DEH420 /EH420 7,000 HOANG LONG JOC, VIETNAM 2009~2010
7 MHNRD 4 WELL PLATFORM DEEN DAYAL FIELD DEVELOPMENT EN S355 K2G3/API 2H Gr. 50Z 11,000 ONGC /L&T, INDIA 2010
8 MHN EN S355 K2G3/API 2H Gr. 50Z 11,000 ONGC/L&T, INDIA 2009
9 ICPR EN S355 K2G3/API 2H Gr. 50Z 10,000 ONGC/AFCONS, INDIA 2009
10 KINABALU EN S355 K2G3/API 2H Gr. 50Z 2000 PETRONAS, MITCO / MALAYSIA 2009
11 SAKHALIN PHASE 2 RUSSIA S460 G2+M (-60Deg Ave.100J) 2,000 SEIC / Sam sung Heavy Industries 2004
12 PTTEP ARTHIT & BONGKOT API 2H Gr.50 / ASTM A572 Gr.50 S355 KT-40 Z35 / S235 KL+20 / S275 KL0 12,000 PTTEP, THAILAND 2006 ~ 2009
13 MHSRP API 2H Gr.50Z EN S355 K2G 3 8,000 L&T, INDIA 2008
14 ESSAR OIL VADINAR REFINERY A671/A672 11,000 ESSAR, INDIA 2010
15 ABU DHABI CRUDE OIL PROJECT API 5L Gr. B NACE, ASTM A671 CC65 CL22 NACE 14,000 IPIC / CPECC / TC GULF, UAE 2009
16 CHINA POWER PLANT ASTM A672 B70 CL32, ASTM A691 1-1/4CR CL22 800 CPI, CHINA 2009
17 ZAKUM GAS PRO CESSING FACILITY S355 G7+M (G8+M ), API 5L Gr.X65 NACE 3,100 ADMA-OPCO / NPCC & TECHNIP, UAE 2008
18 SAUDI KAYAN OLEFINS A671 CC60/65 CL22, A691 1/4CR CL22 2,000 SAUDI KAYAN / KBR, SAUDI ARABIA 2008
19 KASHAGAN FIELD DEVELOPMENT A671 CL60 CL22 +S2 1,700 AGIP KCO, KAZAKHSTAN 2007
20 NCP LOOP REACTOR ASME A516-60N 1,650 SAUDI POLYMERS / DAELIM IND. / WOOYANG HC 2009
21 JACK UP BARGE LEG WEL-TEN 780E (80KSI) 637 Ensung E&C 2009
22 BIEN DONG API 2W 50/60(Z) 11,000 PVEP/BIEN DONG PO C, VIETNAM 2010
LSAW Pipe
Here are a few of the many projects our mills have supplied around the world.
Petrosteel Technologies | General CataloguePremium mills, premium steel 45
REFERENCE
Item Project Name Client Contractor Project Location Value in million
1 Ethylene Plant, TMC – Meta TP1 OMV Austria ABB Lummus Burghausen, Germany 3-5 €
2 Ethylene Plant Expansion BASF Linde AG Antwerp, Belgium 1-3 €
3 Refinery Revision ConocoPhilips ConocoPhilips Wilhelmshaven, Germany 1-3 €
4 Extension of Oil Destillation RD4 OMV Austria Foster Wheeler Wilhelmshaven, Germany <1 €
5 Vacuum Destillation Installation Shell plc. Shell plc. Cologne (Wesseling), Germany 1-3 €
6 Coal Power Plant, Block A & B Vattenfall Kraftanlagen München Moorburg, Germany 1-3 €
7 Datteln 4, Europe’s biggest Anthracite Power Plant E.ON Power Generation Hitachi Datteln, Germany 1-3 €
8 Olkiluoto 3, Nuclear Power Plant TVO Finland Kraftanlagen München Olkiluoto, Finland 3-5 €
9 Coal Power Plant Westphalia, Block A & B RWE Power AG Bilfinger Berger Hamm, Germany <1 €
10 Waste-fuelled Power Plant, MK 6 MVV Kraftanlagen München Mannheim, Germany <1 €
11 Compressor Unit Mega Test Center SIEMENS Power Generation SIEMENS Duisburg, Germany 3-5 €
12 Sharq Polyethylene Plant Saudi Basic Ind. Corp. (SABIC) Linde AG Al-Jubayl, Saudi Arabia >5 €
13 United Olefins Complex Saudi Basic Ind. Corp. (SABIC) Linde AG Al-Jubayl, Saudi Arabia 3-5 €
14 Sorfert Vacuum Condenser Orascom Construction Industries Egypt ThyssenKrupp Uhde Arzew, Algeria 1-3 €
15 Port Said Polypropylene Plant Egyptian Propylene & Polypropylene (EPPC) ThyssenKrupp Uhde Port Said, Egypt 1-3 €
16 Borouge Petrochemicals, Ethylene Cracker Abu Dhabi National Oil Company (ADNOC) Linde AG Ruwais, Abu Dhabi >5 €
17 Hydrodesulphurization (HDS) Plant LOTOS S.A. CB&I Gdansk, Poland 1-3 €
18 Burullus Petroleum Egyptian National Petroleum Company (ENPC) Petrojet Idku, Egypt <1 €
19 Liquid Propulsion Systems Centre (LPSC) Indian Space Research Organization (ISRO) Linde India Nagarcovil, Tamil Nadu, India <1 €
20 Burnpur Plant Update Indian Iron & Steel Company (IISCO) Linde AG Burnpur, Bardhaman, West Bengal, India <1 €
Fitting & Flange
www.petrosteel.ca46
REFERENCE | CLIENTS
Wind Turbine Tower
Clients
Item Project Name P/O Weight (ton) Quantity (Q’ty)
1 V-47 KANSAS(3SECTION)-FPLE 2001.04. 3,310 50
2 UNISON J48 TYPE(2SECTION) 2002.08.16 45 1
3 V-80 EVANSTON(3 SECTION) 67M 2003.06.03 7,800 60
4 V-80 SOLANO 60M 2003.07.02 10,287 81
5 V-80 HIGHWINDS 60M 2003.07.02 1,143 9
6 V-80 BOWLING GREEN 2003.07.02 313 2
7 V-90 65M 2003.10.23 264 2
8 GE 1.5MW 80M TOWER 2004.11.23 16,660 160
9 V-80 BUFFALO M.T 2004.3.11 2,520 15
10 V-80 MILLER M.T 2004.3.26 4,290 30
11 HOPKINS RIDGE 2005.05.08 2,400 22
12 BLUE CANYON 2005.06.15 2,182 20
13 HAWAII 2005.08.29 1,692 20
14 GE GENII (80M) 2005.09.23 25,156 240
15 SIEMENS 2.3MW 80M Tower 2005.11.17 6,468 44
16 SIEMENS 2.3MW 80M Tower (89SET) 2006.07.07 13,083 89
17 SIEMENS 2.3MW 80M W/Tower (14set) 2006.12.12 2,058 14
18 GE GENIV 1.5MW 80M 2007 PJ 2006.08.26 25,300 220
19 SIEMENS 2.3MW 80M W/Tower (30set) 2007.02.19 4,410 30
20 MPSA 80M 4section 2007.05.09 92,160 480
Item Project Name P/O Weight (ton) Quantity (Q’ty)
21 MPSA Flagship 2007.06.13 192 1
22 SIEMENS 2.3MW 80M W/Tower (20set) 2007.07.12 2,940 20
23 SIEMENS 2.3MW 80M W/Tower (30set) 2007.07.12 4,410 30
24 SIEMENS 2.3MW 80M W/Tower (1set) 2007.07.12 147 1
25 GE GENIV 1.5MW 80M 2008 PJ 2007.09.05 13,800 120
26 MPSA 80M Edison Project 2007.12.12 34,176 178
27 SIMENS 2.3MW 68M West Wind I P/J 2008.04.11 5,671 53
28 SIEMENS 2.3MW 68M West Wind I P/J 2008.04.11 963 9
29 SIEMENS 2.3MW 80M West Wind II P/J 2008.04.11 5,880 40
30 enXco MM92 80m Shioloh II P/J 2008.03.05 5,796 42
31 enXco MM92 68.5M 2008.06.18 3,696 33
32 GE Caithness P/J 2010.08.25 170 1
33 Siemens 2.3MW 80M 3sec’ TEXAS P/J 2010.09.20 5,202 34
34 SHI 2.5MW 80M CIELO P/J 2010.10.22 296 2
35 Siemens Altamont P/J 2010.12.08 4,680 30
36 Siemens Windy Flat Ext P/J 2011.01.25 6,708 43
37 GE Caithness P/J 2010.01.29 10,800 60
38 Enercon E82 2012 Australia P/J 2011.02.11 804 6
1500 - 701 West Georgia St., Vancouver, B.C., V7Y 1C6 CanadaT: +1 (604) 601-6928 | F +1 (360) 351-9152 E: [email protected]
W W W. P E T R O S T E E L . C A