precommissioning procedure

8/21/2019 Precommissioning Procedure

1/68

OFFSHORE CONSTRUCTION SPECIALISTS

41578/A/0001/UK/En PIPELINE PRE-COMMISSIONING

PRE-QUALIFICATION DOCUMENT

PIPELINE PRE-COMMISSIONINGPRE-QUALIFICATION DOCUMENT

Offshore Const ruction Specialists (OCS)20 Toh Guan Road

CJ GLS Building #07-02Singapore 608839

Tel: +65 6567-9080Fax: +65 6567-8082

Web: http://www.offshore-ocs.com/index.html

Contact Information

Contact Company Position Email Address.

Keith Jackson Managing and Technical Director [email protected]

Seto Jian Operations Manager [email protected]

William Wijaya Project Manager [email protected]

Loke Kah Poh Project Manager [email protected]

Rakul Remanan Engineering Manager [email protected]

Henry Chuy Subcontracts & Procurement Manager [email protected]

Alastair Wong Senior Project Engineer [email protected]

Fery Wijaya Project Engineer [email protected]


2/68



TABLE OF CONTENTS

1.

INTRODUCTION .................................................................................................................................... 3

2. OCS ORGANISATION CHART ............................................................................................................ 4

3.

TYPICAL PRECOMMISSIONING ORGANISATION CHART................................................................ 6

4. PIPELINE PRECOMMISSIONING ACTIVITIES .................................................................................... 7

5. SAFETY AND SAFE WORKING PRACTICES. ..................................................................................... 7

6. ENGINEERING AND PROCEDURES. .................................................................................................. 8

7. PROCUREMENT. .................................................................................................................................. 8

8.

FABRICATION. ...................................................................................................................................... 8

9. PIPELINE FLOODING, CLEANING AND GAUGING. .......................................................................... 8

10.

PIPELINE INTELLIGENT AND CALLIPER PIGGING. .......................................................................... 8

11. PIPELINE HYDROTESTING ................................................................................................................. 8

12. PIPELINE BULK DEWATERING ........................................................................................................... 8

13. PIPELINE AIR DRYING. ........................................................................................................................ 8

14.

PIPELINE VACUUM DRYING ............................................................................................................... 8

15. NITROGEN PACKING ........................................................................................................................... 8

16.

EXISTING AND PAST CLIENTS ........................................................................................................... 9

17. COMPLETED PROJECTS ................................................................................................................... 10

18. EQUIPMENT DATA SHEETS .............................................................................................................. 18

19.

ISO CERTIFICATION........................................................................................................................... 37


3/68



1. INTRODUCTION

Offshore Construction Specialists (OCS) was formed in 2007 from a core group of marineconstruction engineers to provide construction management, engineering and strategic supportequipment services primarily to the offshore oil and gas sector.

Our key personnel come from previous careers at J.Ray McDermott in the marine operationsdepartment. Our managing and technical director Mr Keith Jackson worked for 17 years in thegroup the last 5 years as the marine division manager.

As a matter of policy under Mr Jackson J.Ray McDermott would execute work peripheral to thatbeing undertaken by the major work vessel (normally executed using third party subcontractors)

using in-house resources. Pipeline pre-commissioning, pre and post trenching, flexible flowline /umbilical lay are examples of work that was routinely carried out in-house and not subcontracted.One of the main reasons for doing this was that it prevented the activities of the subcontractorimpinging on the work of the high cost marine spread. The work was always planned withmaximum operational synergy in mind

In JRM large pipeline pre-commissioning projects such as the 650 km West Natuna gasgathering pipeline network and many other major projects were planned and executed in-house.

OCS has taken the model developed in JRM and applied it to our own activities. Our equipmentis managed and operated by people who come from the same background as the main marinecontractor. We help the marine contractor plan the work such that the pre-commissioning has

the least impact on operations. We are proactive in highlighting potential issues and ensuringboth parties win. Our engineering capabilities are very sophisticated and significantly moreadvanced than our competitors.

OCS has now completed a range of pre-commissioning projects for many different customerswith great success. OCS is certified by Nata for pipeline hydrotesting which is the preeminentqualification for pre-commissioning contractors. The OCS organisation has also been qualified toIS0 9001 since 2009.

Our in-house equipment spread has grown significantly and is described in detail in thisdocument. OCS is equipped to handle the full range of pre-commissioning activities including

flooding, cleaning, gauging, hydrotesting, dewatering, drying and nitrogen packing. We work withestablished intelligent and caliper pig suppliers to complement our service. We have establishedlong term relationships with key Singapore and overseas vendors.

OCS is equipped to handle large projects or discrete project elements depending on the specificneeds of the customer.

The company has grown steadily since incorporation and now employs 60 personnel of whom 30are civil/structural and mechanical engineers working with our pre-commissioning technicians.

The company office in Toh Guan Rd, Singapore has been leased until 2014 and has room foradditional expansion. The office can accommodate customer representatives for liaison as

necessary.


4/68



2. OCS ORGANISATION CHART

KEY PERSONNEL CONTACTS

Keith Jackson Managing and Technical Director [email protected]

Seto Jian Operations Manager [email protected]

William Wijaya Project Manager [email protected]

Loke Kah Poh Project Manager [email protected]

Rakul Remanan Engineering Manager [email protected]

Henry Chuy Subcontracts & Procurement Manager [email protected]

Alastair Wong Senior Project Engineer [email protected]

Fery Wijaya Project Engineer [email protected]


5/68

PRE QUALIFICATION Offshore Construction Specialists Pte Ltd.

KEITH JACKSON

MANAGING & TECHNICAL DIRECTOR

PROJECT & CONSTRUCTIONMANAGEMENT

SETO JIAN

OPERATIONS MANAGER KP LOKE

PROJECT MANAGER

NG

ACCOUNTS

CONSTRUCTIONENGINEERING

FIELD CONSTRUCTIONOPERATIONS

SAYED DEDY

PRE-COMMENGINEER

DRAFTING

PR

SEN

SUDHA

ANDY

PRIYA

ZIA AL

STRUC

CHANIN

SRIYAPORN

SNR.DRAFTING

ALASTAIR WONG

SNR PROJECTENGINEER/

PRE-COMM MANAGER FERY WIJAYA

PROJECT MANAGER

BODIE

MALLET

SETTHA Y.

IVAN CHAI

(OPERATIONS/SNR. FIELDENGINEER)

LE

CU

KRISBEL

BUDIMAN

ZACK

INDRA

IDHAM

TECHNICIANS MECHANICS

OPERATIONS ADMINISTRATION

UDAY

MOH

SENIOEN

JU

AD

ARYO PRAKOSO

SNR. DRAFTSMAN

OCS ORGANISATION CHART

PLANT &EQUIPMENT

ADI CAHYA

AARON LIAN

TRACY EE

ZHONG ZHIYUAN

DAVID SHAW

CHEAH WIN LOONG

CHATCHAI W.

SEAN SIA TIN WEI

DANIEL CAO

FIELD ENGINEERS

ENGINEERING

RAMIL ZAPANTA

VINOTH KUMAR

DRAFTSMAN

RAKULREMANAN

ENGINEERINGMANAGER

OPERATIONS

STRATEGICEQUIPMENT

TEAM FIELD

CONSTRUCTIONSUPERVISION

TEAM

JAMIE

JACOBSEN

LEON COAD

DAVID WOOD

FIELD FOREMANS

JAMES CARROLL

FIELDSUPERINTENDENT

D

EQUIPMENT

WILLIAM WIJAYA

EQUIPMENT MANAGER

*ADMINITRATION

*ADMINITRATION SUPPORTTEAM: TRACY & URISA

JAW LE

E & MCOORDINATOR

RONI

GROUTINGSUPERVISOR

TO

IT

REMARK:

HERYA

TAUFA

SAINU

SAVOY

AMITH

NAVA


6/68



3. TYPICAL PRECOMMISSIONING ORGANISATION CHART

OCS Pre-commissioning Team offshore

ONSHORE

OFFSHORE

Note* : Project Managers, Project Engineers & Pre-commissioning Engineers will be selected from thepersonnel pool shown for each categary.

CLIENT

KP LOKE

WILLIAM WIJAYA

PROJECT

MANAGERS

RAKUL

REMANAN

ENGINEERING

MANAGER

PRAVIN THORAT

HERY LEMBANG

SUDHAKAR

SUBRAMANIAM

UDAYSARATHY

MOHAN

ZIA AKBAR

TAUFAN SIREGAR

PRIYA PANJIROSA

AMITH PRASAD

SAVOY

SAINUL ABID

CONSTRUCTION

SUPPORT

ENGINEERS

CHANIN

SRIYAPORN

ARYO PAKOSO

RAMIL ZAPANTA

VINOTH

DRAFTING

ALASTAIR WONG

FERY WIJAYA

PROJECT

ENGINEERS

SAYED DEDY

MAHDI

ADI CAHYA

BODIE MALLET

SETTHA Y.

IVAN CHAI

CHONG CHIA YAN

AARON LIAN

DAVID SHAW

CHEAH WIN

LOONG

CHATCHAI

SEAN SIA

FIELD ENGINEERS

HENRY CHUY

SUBCONTRACTS &

PROCUREMENT

MANAGER

JOYCE

LIM

EXPEDITOR/ BUYER

CHARLES TAN

BUYER/ SUBCONTRACTS

EXECUTIVE


7/68



4. PIPELINE PRECOMMISSIONING ACTIVITIES

OCS experience embraces the full range of pipeline pre-commissioning activities from the initialflooding, cleaning, gauging and hydrotesting to dewatering, drying and nitrogen purging andpacking.

Specific activities undertaken by OCS:

No. Description

1 Flooding, Cleaning and Gauging.

2 Calliper and Intelligent Pigging.

2 Hydrotesting

3 Dewatering/ Swabbing

4 Air Drying

5 Vacuum Drying

6 Nitrogen Purging

7 Nitrogen Packing

OCS provides a cradle to grave pipeline pre-commissioning services including completeengineering, procurement, fabrication and execution services. Our in-house inventory isextensive and our personnel are well trained.

5. SAFETY AND SAFE WORKING PRACTICES

OCS is acutely aware of the dangers involved in the marine construction industry in general and inpipeline pre-commissioning particularly where high pressure water and air and heavy equipment,chemicals etc combine to create a range of potential hazards if not managed properly.

All OCS activities on specific projects are the subject of hazids and risk assessments to ensure

levels of risk are reduced to as low as reasonably practical. These risk assessments are ideallyattended by the main contractor and the ultimate client.

Other specific safety and operational measures that are taken:

i) All OCS personnel have appropriate Bosiet offshore sea survival trainingii) OCS technicians are Nata qualified and well trained for their specific dutiesiii) All OCS equipment is provided with a specific safety passport.iv) Offshore hazardous areas are barricaded as required and unauthorized personnel are

excluded.v) All installation aids are properly engineered and subject to structural checks by the OCS

CSE group.

vi) Appropriate Hazchem sheets are posted in areas where chemicals are in use.


8/68



6. ENGINEERING AND PROCEDURES

OCS prepares project specific engineering and procedures for each job undertaken. What setsOCS apart from other pre-commissioning contractors is our engineering skills base which meansthat all structural, mechanical, hydrodynamic and aerodynamic considerations are addressed in-house. OCS procedures will address:

i) Project specific procurement requirements.ii) Equipment specification requirements and preparations.iii) Designs of Pig launchers and receivers for Flooding, Cleaning and Gauging.iv) Designs of Hydrotest heads.v) Designs of Pig Launchers and Receivers for Dewatering and Drying.vi) Pig Requirements and Designations.

vii) Intelligent and Calliper Pigging requirements.viii) Chemical injection requirements.ix) Hydrotesting pressurization, strength and leak tests.x) Bulk Dewatering.xi) Drying Procedures using Air or Vacuum drying techniques.xii) Nitrogen Packing.

7. PIPELINE PRE-COMMISSIONING PROCEDURES

PLEASE REFER TO APPENDIX 1

8. FABRICATION

9. PIPELINE FLOODING, CLEANING AND GAUGING

10. PIPELINE INTELLIGENT AND CALLIPER PIGGING

11. PIPELINE HYDROTESTING

12. PIPELINE BULK DEWATERING

13. PIPELINE AIR DRYING

14. PIPELINE VACUUM DRYING

15. NITROGEN PACKING


9/68



8 EXISTING AND PAST CLIENTS

OCS has built up a significant customer base during four (4) years of operations. OCS past andpresent clients are listed below. References can be provided on request.

No. Client Name

1 Star Petroleum ( Indonesia)

2 HESS ( Indonesia)

3 Asia Petroleum Developments (Salamander)

( Indonesia)4 Kangean Energy ( Indonesia)

5 NuCoastal ( Thailand)

6 Chevron (Thailand)

7 EMAS ( Singapore)

8 Larsen & Toubro ( Malaysia/ India)

9 SapurasAcergy ( Malaysia)

10 TLO SapuraCrest ( Malaysia)

11 Heerema (Holland)

12 NorCe ( Singapore)

13 Offshore Marine Contractors

14 Vietsovpetro (VSP) (Vietnam)

15 Timas Suplindo ( Indonesia)

16 Nippon Steel (Indonesia)

17 Newfield Peninsula Malaysia ( Malaysia)

18 Franklin Offshore ( Singapore)

19 M3 Energy ( Malaysia)

20 Sarku ( Malaysia)

21 Hako Offshore ( Singapore)

22 Global Industries ( Malaysia)

23 Sea Drill ( Singapore)

24 Origin Energy (Australia)

25 Swiber ( Singapore)

26 Galoc ( Philipines)

27 GFI ( Thailand)


10/68



9. COMPLETED PROJECTS

Year Project Title ClientPipelineDia (“ )

Length(km)

Scope Of Work Location

2007 GFI EOCP EMASoffshore

Constructionand

Production

10”

6” Flexible

0.8

0.1

Flood, Clean,Gauge and

Hydrotest/Leaktest

Gulf ofThailand

2008 GalocDevelopment

Project

EOCP EMASoffshore

Construction

andProduction

6 “ Spool6” Flexible

0.7 Leak Test 65km offNorth West

Coast of

PalawanIsland

2008 Nexus Australia-Bass Strait

Nexus PLEM &StartupHeads

- Leak Test Singapore

2009 Asia PetroleumDevelopment

(APD) – GlagahKambuna FieldDevelopment

PT Timas 14 “ 42 Flood, Clean,Gauge andHydrotest

From theKambunaplatform

offshore NorthSumatera to a

landfallNortheast ofMedan

2009 Star PetroleumKakap Field

Redevelopment

PT Timas 10”

6”

6”

11.2

2

2.3

Flood, Clean,Gauge andHydrotest

Kakap Fieldlocated in theIndonesian

West NatunaSea

2009 M3nergy JDASdn Bhd/Carigali-

PTTEPI-JDABlock B-17

FranklinOffshore

11” Flexible 0.24 Leak Test OffshoreMalaysia

2010 HESS UjungPangkah

Development

PT Timas 6”

12”

16”

5.5

5.5

5.5

Flood, Clean,Gauge,

Hydrotest,Dewater, Air &Vacuum Dryand Nitrogen

Packing

UjungPangkah,Gresik inSurabayaIndonesia


11/68



Year Project Title Client

Pipeline

Dia (“ )

Length

(km) Scope Of Work Location

2011 KangeanEnergy

IndonesiaLimited – TSBDevelopment

PT Timas 18”20”20”

255.55.5

Flood, Clean,Gauge andHydrotest,

Dewater, Dryand Nitrogen

Packing

Bali Sea,approximately120km fromPagerubgan

Island

2011 Kodeco Project PT Timas 6” 7 km &6km


Java Sea

2011 Chevron

(Thailand)

EMAS 10”

16”

35 km &35 km


Gulf OfThailand

2011 TSB Kangean PT Timas 18”

20”

25.745km &5.2km

Flood, Clean,Gauge andHydrotest,

Dewater, Dryand Nitrogen

Packing

Java Sea

2012 Bawal PT Timas 14” 40 km Flood, Clean,Gauge andHydrotest

Natuna Sea

2012 Bien Dong DOF Subsea 6” flexible 400m LeakTest Vietnam

2013 Zawtika L&T 18”

18”

11.3 km &9.7km


Myanmar

2013 PTTEP BongkotRiser

Replacement

DOF Subsea 6” 80m LeakTest Gulf OfThailand

2013 Pertamina EPMOL Project

LeightonOffshore

12” 28km Flood, Clean,Gauge,

Hydrotest andDewater

Java Sea

2012 Pertamina ULProject

PT Timas 12” 12 km Flood, Clean,Gauge andHydrotest

Java Sea

2012

Pertamina EPL-Parigi

PT Timas 20’ / 14” 500m/3.3

km

Flood, Clean,

Gauge,Hydrotest

Java Sea


12/68



2014 Petronas

Ketapang

PT Timas 12” 111 km Flood, Clean,

Gauge,Hydrotest,

Dewater, Dry,N2 Pack.

2014 PetronasKetapang

PT Timas 8/12”/16” 700 meach

Flood, Clean,Gauge,

Hydrotest, .


13/68



GFI (Thailand) Pigging and Hydrotesting Photos (Nov 2007 to Jan 2008)

Flexible Riser Leak For M3nergy JDA Sdn Bhd / Carigali-PTTEPI - JDA Block B-17,Offshore Malaysia. ( Sep 2009) Photos


14/68



Star Energy (KAKAP) Pipeline Project– Pigging & Hydrotest (Oct 2009) Photos

Asia Petroleum Development (APD) Pigging and Hydrotest ing. - Glagah Kambuna FieldDevelopment Pro ject (Mar 2009) Photos


15/68



HESS (UJUNG PANGKAH) Pipeline Project–

Pigging, Hydrotest, Dewatering, Drying & N2 Pack (Jan – Feb 2010) Photos

Chevron Thailand ProjectPigging & Hydrotest (Jan – July 2010) Photos


16/68



Kangean Project

Pigging, Hydrotest, Dewatering, Air drying and N2 packing (Aug- Nov 2011) Photos

Kodeco ProjectPigging & Hydrotest (Oct - Dec 2011) Photos


17/68



Zawtika Project, 2013

Pigging & Hydrotest Photos


18/68



18. EQUIPMENT DATA SHEETS

OCS operates a comprehensive range of pre-commissioning equipment. Each piece ofequipment has it own equipment passport which is maintained from project to project. This helpsensure that only appropriately maintained equipment is supplied to projects.

A sample of our equipment passport is included below.

7.1. FLOODING PUMP SERIES 1

FLOODING PUMP - 03 Nos.

Capacity 320 Cu.m / Hr

Maximum Head 171 meters

Engine Make Detroit Diesel 8V-92TA 450BHP

Pump Make SLD 280-43 3


19/68




20/68




21/68



7.2. FEED PUMP




Engine Make Detroit Diesel 8V-92TA 450BHP

Pump Make SLOW350-380B


22/68




23/68




24/68



7.3. DIESEL DRIVEN FLOODING / JETTING PUMP SERIES 2

(HIGH PERFORMANCE)




Engine Make Detroit Diesel 12V-149TI 1130BHP

Pump Make 250SLD 450-60 4


25/68




26/68




27/68



7.4. DIESEL DRIVEN HIGH PRESSURE PUMP SERIES 2 (HIGH

PERFORMANCE)

HIGH PRESSURE DISEL DRIVENPUMP

- 01 Nos.

Capacity 180 liters / Minute

Maximum Pressure 7250 psig

Engine Make Johndeere 160kw 6 cylinder diesel engine

Pump Make Woma 2502 P40


28/68




29/68



7.5. HIGH PRESSURE DISEL DRIVEN PUMP SERIES 1

HIGH PRESSURE DISEL DRIVENPUMP

- 01 Nos.

Capacity 35-37 liters / Minute


Engine MakeIsuzu 50 HP-4 cylinder (turbocharged & water

cooled)

Pump Make Den-Jet CD 40-550

7.6. HIGH PRESSURE AIR DRIVEN PUMP

HIGH PRESSURE AIR DRIVENPUMP

- 01 Nos.


Maximum Pressure 7,500 psig

Maximum Air Supply Pressure 125 psig

Pump Make Haskel Model TP600-GSF-60


30/68



HIGH PRESSURE AIR DRIVENPUMP

- 04 Nos.



Maximum Air Supply Pressure 120 psig

Pump Make Hydraulics International HI Model 5L-SS-60


31/68



7.7. DEAD WEIGHT TESTER

DEAD WEIGHT TESTER + WEIGHTSET

- 02 Nos.

Make DH –BUDENBERG MODEL 580 DX

Range 0-700 bar

Accuracy 0.025 %

Least Count 0.069 bar


32/68



7.8. PRESSURE/TEMPERATURE RECORDER

PRESSURE RECORDER - 03 Nos.

Make BARTON

Range 0-5000 psi

Accuracy ± 1 % FS

TEMPERATURE RECORDER - 02 Nos.

Make SCOTECH

Range 0-50o C

Accuracy ± 1 % FS

PRESSURE-TEMPERATURE DUALRECORDER

- 02 Nos.

Make BARTON

Range 0-5000 psi/0-100o C

Accuracy ± 1 % FS


33/68



7.9. 8 X 10 FT BREAK TANK (18 Cu.m Capacity) - 01 Nos

For storage and introducing freshwater slug during pigging/ dewatering of pipelines


34/68



7.10. VACUUM PUMP

VACUUM PUMP - 01 Nos.


Booster MakeEdwards mechanical booster Model EH1200,

Hydrokinetic Drive

Pump MakeEdwards high vacuum pump Serial 220. EIM

275

7.11. PRESSURE TRANSDUCER & READOUT)

- 03 Nos.

Type 750C, ABSOLUTE PRESSURE TRANSDUCER

Make/ Range MKS

Accuracy/ Input/ Output

10 MILLIBAR , 100 MILLIBAR , 1000 MILLIBAR

1% OF FULL SCALE

+13 TO +32 VDCINPUT, 0-10VDC O/P

- 02 Nos.

Type DIGITAL SUPPLY AND READOUT

Make/ Range MKS

Input Power220VAC


35/68



7.12. HEATED REGENERATIVE DESICCANT AIR DRYER & AIR COOLED AFTER

COOLER

Regenerative compressed air dryer use desiccant to absorb water vapour from the compressedairstream. In the twin tower design, one tower dries the air from the After-cooler while thedessicant in the other tower is being regenerated to provide continuous operation. A heater isadded to heat the purge air. It not only benefits the regeneration effect but also decreasesregeneration purge loss.

Desiccant: activated alumina + molecular sievePurge air:


36/68



7.13. LIQUID N2 CONVERTER

1. Operating parameters:

Design temperature load bearing/pressure retaining –20 Deg to + 50 Deg C.

Design temperature machinery –20 Deg to + 50 Deg C.2. Diesel Engine

Detroit Diesel model 8V 71T

Rated to produce 420 BHP @ 2100 RPM. (Continuous)3.. Gearbox

Marco 3 pad hydraulic pump drive gearbox

Marco Gearbox will be enclosed coupled on engine flywheel4. Start System

Air starter5 . Hydraulic System

Twin Commercial hydraulic pumps for Low and High pumping rate, motors and relief valves. heat exchanger.

6. Cryogenic High Pressure System

Paul triplex.

Max. Pressure: 10,000 psi.

Flow Rate: 3,000 SCFM.

Discharge Temperature: 70oF.

7. Control Panel

A stainless steel control panel8. Skid/Frame


37/68



19. ISO CERTIFICATION


38/68

Page 11 of 12

ATTACHMENT # 5

OCS NATA Certification


39/68

NATA Accredited Laboratory

National Association of Testing Authorities, Australia(ABN 59 004 379 748)

has accredited

Offshore Construction Specialists Pte Ltd

Singapore

following demonstration of its technical competenceto operate in accordance with

ISO/IEC 17025

This facility is accredited in the field of

MECHANICAL TESTING

for the tests, calibrations and measurements shown on theScope of Accreditation issued by NATA

Jennifer EvansChief Executive Officer

Date of accreditation:15 July 2013 Accreditation number:19122


40/68

Page 12 of 12

ATTACHMENT # 6

OCS Personnel CVs


41/68

Offshore Construction Specialists Pte. Ltd.20 Toh Guan Road, #07-02 CJ GLS Building, Singapore 608839

Tel:+65 6567 9080 Fax: +65 6567 8082

Sayed Dedy Mahdy

Career Summary

• 4 Months University Field Practical, Tunu Field Development “Tunu Phase 8 EPSC3 Project”- TotalFinaElf Indonesie.

• 9 Months as Field Engineer for PT. McConnell Dowell Indonesia.• 1 year and 8 months working with PT McDermott Indonesia• Currently working with Offshore Construction Specialists Pte. Ltd.

Experience

Field EngineerJune 2009 - January 2010Amerada Hess Ujung Pangkah Phase 2, Indonesia

Offshore Construction Specialists Pte Ltd• Responsible for all Offshore Pigging Operation, Hydrotesting and Leak test of 3

subsea flowlines, 6”, 12” and 16” between WHP B and WHP A.

• Manage the offshore operation at site, together with the barge supt & the other fieldengineers. Work included the wellhead platform, WHP B installation, 6”, 12” and 16”flowline installation between WHP B and WHP A. Post trenching of 6”, 12” and 16”flowline.

Field EngineerSept 2008 – May 2009Asia Petroleum Development (APD) - Glagah Kambuna Project, Indonesia Offshore Construction Specialists Pte Ltd

• Responsible for all Offshore Pigging Operation, Hydrotesting and Leak test of 42 km14” gas export pipeline from the Kambuna platform offshore North Sumatera to a

landfall north east of Medan.

• Manage the offshore operation at site, together with the barge supt & the other fieldengineers. Work included 5 km beach approach, Pre and Post trenching of 13 km ofthe pipeline to a cover of 2.0 metres. Topsides installation and Hook up.


42/68


Tel:+65 6567 9080 Fax: +65 6567 8082

Field EngineerNovember 2007 - January 2008

GFI Bualuang field development project, Bualuang Field, ThailandOffshore Construction Specialists Pte Ltd

• Responsible for all Offshore Pigging Operation, Hydrotesting and Leak test of 800mtrpipeline, Flexible risers and spools.

• Manage the offshore operation at site, together with the barge supt & the other fieldengineers. 1 jacket(sidelift & upend) + 1 deck + 2 pipeline (10 in) + 1 SPC + 1PLEM+ 4 sp tie in (10 in) + 2 flexible riser (6 in) + 1 mooring hawser

Field EngineerNovember 2006 – October 2007Project : Kerisi Field Development Phase II CPP Jacket and Deck Installation

PT. McDERMOTT INDONESIA

Working with procedures and instruments preparation for 12”∅and 16”∅ spoolshydrotesting. Responsible for almost all load out preparation for 3 material barges, 4 nos ofCentral Processing modules over 1000MT and 8 Legs Jacket load out for CentralProcessing Platform

Field EngineerNovember 2006 – October 2007Project : Angel Project – Substructure Installation and Pipelay

PT. McDERMOTT INDONESIAManage and supervise technical on field for fabrication of 5 sections Articulated Stinger andrefurbishment 3 sections Articulated Stinger.

Field EngineerJanuary 2007 – August 2007Project : SSB T&I

PT. McDERMOTT INDONESIAManage and supervise technical on field for structural modification 5 sections ArticulatedGulf Of Mexico Stinger and refurbishment 3 sections Articulated Stinger and 1 section trussstinger.

Field EngineerAugust 2006 – September 2006Project : Kerisi Field Development Phase I

PT. McDERMOTT INDONESIAManage and supervise readiness of marine installation on field in subcontractor yard of 1420

MT Wellhead Platform and 1113 MT Jacket load out.

Field EngineerJuly 2006 – August 2006Project : PM3 Camau – Gas Pipeline

PT. McDERMOTT INDONESIAAs-built for survey for over 289 KM from Bunga Raya (Malaysian Area) to GDS (Vietnamesearea) in Gulf Thailand. J. Ray McDermott Engineer representative on board to identification


43/68


Tel:+65 6567 9080 Fax: +65 6567 8082

free span and correction of the found free span. Over 45 days was spent offshore on boardof Setouchi, Fugro Survey vessel

Field EngineerJanuary 2006 – April 2006Project : EMEPMI Seligi A- To Tapis Pump Pipeline Replacement

PT. McDERMOTT INDONESIAPrepared and manage of fabrication and refurbishment for engineering installation aid for

18”∅ crude pipeline installation, assisting in procedures and instruments preparationassociated with pigging and hydrotesting. Over 60 days was spent offshore time on board

DB30 to manage 21,2 KM 18”∅ crude pipeline installation, riser and two sub sea spooltrough the commissioning stage.

Field Engineer

December 2005 – January 2006Contract Value USD 2.5m – PT. NewMont NTT. Batu Hijau-Scavenger Maintenance Phase I

PT. McCONNELL DOWELL INDONESIAPerformance as Project Planner for Scavenger Shut Down Project on PT. NewMont NTT.Project Mobilization coordinator and controlling material take off.

Field EngineerApril 2005 – December 2005Contract Value USD 4.6m + USD 1,2m Variation – Kaltim Prima Coal Service Wharf andShiploader Jetty Refurbishment.

PT. McCONNELL DOWELL INDONESIAEmployed with PT McConnell Dowell Indonesia to manage the shiploader jetty and servicewharf rehabilitation works contract. Contract involves the partial demolition andreinstatement of 15years old reinforced concrete service wharf at KPC and rehabilitation of

Structural steel shiploader jetty paintwork.

Field PracticalApril 2002 - June 2002Contract Value – USD 3.5m - Tunu Field Development Phase 8-EPSC 3, Aerial Pipe

Installation

PT. CITRA PANJI MANUNGGAL• Preparing Pilling Equipment that Needed for Pilling Activit ies• Responsible for daily Report

• Assisting Surveying• Liaise with third Party Inspector Badan Kualifikasi Indonesia (BKI)• Assisting with application of work Permit

• Assisting with safety procedures


44/68


Tel:+65 6567 9080 Fax: +65 6567 8082

Education

Bachelor of Engineering (Civil),Diponegoro University, 2004

On Job Training and Courses

HUET – MSTS ASIA SDN. BHD, Johor Malaysia, 2006Sea Survival – MSTS ASIA SDN. BHD, Johor Malaysia, 2006

Fire Fighting – MSTS ASIA SDN. BHD, Johor Malaysia, 2006Wire Rope Inspector - Carl Stahl Evita Ltd, Batam Indonesia, February 2007

Field Engineer training 1st Module : General Topics, Singapore, 2007Field Engineer training 2nd Module : Structural Installation, Singapore 2007

Incident Investigation training, Batam, Indonesia 2007Task Risk Assessment training, Batam, Indonesia 2007

FirmsNov 2007 Offshore Construction SpecialistJan 2006 to 8 Oct 2007 PT McDermott IndonesiaApr 2005 to Dec 2005 PT Mc Connell Dowell Indonesia

Personal Details

Date of Birth : November 29, 1979Age : 34Nationality : Indonesian CitizenshipLanguages : Bahasa Indonesia – oral & written

English – oral & writtenContacts : Mobile +62-8127011155


45/68

Offshore Construction Specialists Pte Ltd.

20 Toh Guan Road, #07-02 CJ GLS Building, Singapore 608839

Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 1 of 2

Information herewith contains private & confidential information and may be used only for the purpose of this project unless expressedpermission is granted by Offshore Construction Specialists Pte Ltd.

PERSONAL DATA

Name : Roni

DOB : 20 August 1975

Place / DOB : Belawan

Sex : ale

a!ital Status : a!!ie"Nationalit# : $n"onesia

Religion : oslem

DOCUMENT

No Document Number Date Of Issued Date Of Expir P!ace Of Issued

1 Pass%o!t & 259'7( )0 No* 2010 )0 No* 2015 Batam

CERTI"ICATE O" COMPETENC#

No Certificate Number Date O"

issued

Date Of

Expir

P!ace Of

Issued

1+ BOS$,- . -!a*el Sael#

# Boat

2( No* 2010 2) No*

201(

Batam

$OR% E&PERIENCES

Pre'Comm Super(isor

August 2013 to present

Oso!e 3onst!uction S%ecialists Pte 4t"

Res%onsile o! te maintaining ig P!essu!e %um%s an" 6loo"ing Pum%s in goo" con"ition ate!

%!oect an" %!e%a!e8 unction test o ig P!essu!e %um%s an" 6loo"ing Pum%s eo!e oso!e wo!+

O%e!ate an" ensu!e ig P!essu!e Pum%s an" 6loo"ing %um% wo!ing in goo" con"ition o! P!e

commissioning wo!+


46/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 2 of 2


Comp!eted Pro)ect*

No Compan Pro)ect position Location C!ient +esse! Name Periode

1+ Ne%tune SONSB ;!outing

-ec

-ailan" P-- BODO

SP4$,R

10 Aug 200(

25 Se%t 200(

2+ Ne%tune SA$P, ;!outing

-ec

3inese SA$P, ,RA$D

O66SOR,

1< =un 200'

29 =ul 200'

)+ Ne%tune >NDA$ ;!outing

-ec

$n"onesia/

?alimantan

-O-A4 >NDA$

O66SOR, 1

09 =ul 2007

20 Aug 2007

(+ Ne%tune S&$B,R ;!outing

-ec

B!unei BSP S,44 SAR? 2000 0' Oct 2007

)0 Dec 2007

5+ Ne%tune S&$B,R ;!outing

-ec

B!unei BSP S,44 S&$B,R

;4OR$OS

07 a# 200<

11 =ul 200<

'+ Ne%tune SBS,A 7 ;!outing

-ec

ala#sia P,-RONAS RO3? &A-,R

2

15 Se%t 200<

20 Oct 200<

7+ Ne%tune S&$B,R ;!outing

-ec

B!unei BSP S,44 S&$B,R

R,SO4-,

05 =an 2009

10 a! 2009


47/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

NAME: KRISBEL SIMANJUNTAK

DATE OF BIRTH 4 May 1963

NATIONALITY Indonesian

MARITAL STATUS Married

EDUCATION/TRAINING :

May 07, 2007. Basic Offshore Safety Induction & Emergency Training Including Additional

OLF Modules (OPITO Approved)

February 06, 2007. Confine Space Entry and Rescue.

LANGUAGES Bahasa Indonesian (written and spoken)

English (Fair Spoken)

Career Summary

Over 26 years experience in maintain heavy equipment, engines, High Pressure pumps and floodingpumps, pipe fittings, operating related machinery.

Work Experience

Mechanic Mar 2009 to presentOffshore Construction Specialists Pte Ltd

Responsible for the maintaining High Pressure pumps and Flooding Pumps in good condition after

project and prepare, function test of High Pressure pumps and Flooding Pumps before offshore work.

Operate and ensure High Pressure Pumps and Flooding pump working in good condition for Pre-

commissioning work.

Completed Projects

Oct 2013 – Nov 2013Offshore Construction Specialists Pte Ltd

Project : Leighton Offshore

Location : Jakarta - CirebonS513 Main Oil Line from X-Ray Field to Balongan Plant ProjectPost Trenching, Free Span Correction, and Pre-commissiong Services


48/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Task Description

Jetting Technician April 2013 – May 2013Offshore Construction Specialists Pte Ltd

Project : Brunei Shell Petroluem – Domgas Pipeline Installation ProjectLocation : Bulan Bulan Field Development - Brunei

Jetting services for the Pile Refusal Remedial Project

Task Description

Jetting Technician responsible for operating of jetting spread, monitoring the performance of

equipment and troubleshooting the jetting equipment in the event of equipment breakdown.

Jetting Technician August 2012 – January 2013Offshore Construction Specialists Pte Ltd

Project : Chevron (Australia) – Domgas Pipeline Installation ProjectLocation : Domgas Field Development, North West Coast of Australia

Jetting services for the 6” & 20” pipeline 1.5 km and 5.9km CW-DW and PPP-DW installation

Task Description

Jetting Technician responsible for operating of jetting spread, monitoring the performance of

equipment and troubleshooting the jetting equipment in the event of equipment breakdown.

Mechanic April 2012 to May 2012Offshore Construction Specialists Pte LtdProject : Conoco Philips Indonesia – Develop the Bawal FieldLocation : Bawal Field – Natuna Sea

Offshore Pigging and Hydrotesting work for 14” newly laid pipeline to connect the two Bawalwells (BW1 and BW2) to inline Tee and valve assemblies on the new pipeline, using rigidspools.

MechanicOctober 2011 – November 2011Offshore Construction Specialists Pte LtdProject : Korea Development Company LTD. – Gas Li ft Compression Project.Location : Poleng Field – Gresik, West Java, Indonesia.

Offshore Pigging and Hydrotesting work for newly laid pipeline 6” Gas Lift Pipeline DW-PPand 6” Gas Lift DW-PP in total length 6.3 Km.

MechanicSeptember 2011 – October 2011Offshore Construction Specialists Pte Ltd

Project : Kangean Energy Indonesia Ltd. –Pre-Commissioning Services for Subsea Facilit iesof TSB Field Development


49/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Location : TSB Field, Kangean Block – Bali Sea Indonesia.

Offshore Pigging and Hydrotesting work on DSV.Crest Odyssey of 25.745km x 18” Rigid

Pipeline and 2 nos of 5.2km x 20” Rigid Pipelines

MechanicFebruary 2011 – July 2011Offshore Construction Specialists Pte LtdProject : CHEVRON 2011 INSTALLATION CAMPAIGN.

PLATFORMS AND PIPELINES INSTALLATIONLocation : Chevron Thailand Oil and Gas Fields, Gulf of Thailand

Flooding and gauging work of newly laid pipelines:16” NPPLL, 5.4 Km Long Pipeline10” FUPLP, 5.9 Km Long Pipeline

10” PDPLB, 6,7 Km Long Pipeline10” KPPLG, 2.7 Km Long Pipeline10” ERPLZC, 2.4 Km Long Pipeline

As well leak testing of spools before subsea tie in of:NPWL Platform (3 ea x 16” Spools)FUWP Platform (2 ea x 10” Spools)PDWB Platform (5 ea x 10” Spools)KPWG Platform (2 ea x 10” Spools)ERWZC Platform (2 ea x 10” Spools)

Mechanic

January 2010 – March 2010Offshore Construction Specialists Pte Ltd

Project : Hess (Indonesia – Pangkah) Ltd. – Ujung Pangkah Development Project.Location : Ujung Pangkah oil & gas field, East Java. IndonesiaPigging, Hydrotesting and Leak test work of 3 subsea flowlines, 6”, 12” and 16” between WHP B andWHP A.

Mechanic August 2009 to November 2009


Project : Star Energy Ltd. – Kakap Gas Development Project. Location : Kakap Field West Natuna, Indonesia. Offshore Pigging and Hydrotesting work for newly laid pipeline:

6” gas flowline, 2.3 Km long, KG-West 1 subsea wellhead to KG Platform,

6” gas flowline, 2 Km long, Lukah-1X subsea wellhead to KG Platform

10” pipeline 11.2 Km long. KG Platform to KF Platform

Mechanic and Project Leader ManMarch 2009 - June 2009Offshore Construction Specialists Pte Ltd

Project : Serica Energy – Asia Petroleum Development Project


50/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Location : Gelagah Kambua Field Development, Malacca Strait, North Sumatra, Indonesia

Diameter 14” 42 Km long Pipeline installations from WHP Kambuna A to onshore receiving facilities,5km beach pull preparation operation (trenching Work), 10km jetting operation, lowering pipeline 2mtrTOP. Pre-commissioning of laid pipeline

Task DescriptionMechanic & Leader man on 5KM trenching work from near shore to shore for beach pull operation,ensure the generator, air compressor and 2 unit of excavator running in good condition for 24hrstrenching operation. Maintain 24hrs operation on 5 unit jetting pumps during jetting operation and pre-commissioning job including pigging operation and hydrotesting of Dia. 14”, 42 KM pipeline.

Mechanic 1February 2002 – August 2008

J.Ray McDermott,Location : Batam, Indonesia

Marine onshore facility maintenance and projects preparation.

Task Description Maintain all running heavy equipments in marine onshore facilities to ensure working in bestperformance. Refurbish and prepare including function test of marine E&M equipment before send tooffshore for project including forklift, loader, Skagit Winch, Hydraulic Hammer, Generators,Compressors.Special in preparing flooding pumps and high pressures pumps for offshore use.

Mechanic and Project Leader ManMarch 2006 – July 2006J.Ray McDermottProject : PM3-Camau (Offshore Gas Pipeline Installation)Location : Vietnam

Dia.16” 300KM long Pipeline installation. Beach pull preparation, 6KM trenching from near shore toshore operation to buried pipeline in various depth from 4mtr near shore to 6mtr at offshore

Task DescriptionMechanic & Leader man on 6KM trenching work from near shore to shore for beach pull operation,

ensure the generator, air compressor and 2 unit of excavators running in good condition for 24hrstrenching operation. Maintain 24hrs operation on 6 unit jetting pumps during jetting operation.

Mechanic 1May 1990 – July 1999PT. McDermott IndonesiaLocation : Batam, Indonesia

Fabrication yard facility maintenance

Task Description Maintain all running heavy equipments and engines in Batam fabrication yard including: fork lift,

hydraulic crane, loader, generators and compressors.


51/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Mechanic Helper August 1987 – June 1989

PT. Barakaz Lumber CoyLocation : Riau, Indonesia

Logging Operation

Task DescriptionHelping mechanic in maintain heavy equipment including Bulldozer, Low Vehicle Trailer, Fork Lift,Compressors and Generators.


52/68



Tel: +65 65679080 / Fax: +65 65678082

CURRICULUM VITAE

Mohd Zakaria Bin Abdul Aziz

Mechanic / TechnicianNationality: Malaysian

Date of Birth: 11-March-1986Marital Status: SingleLanguages: English and Bahasa Melayu

Education / Training

High School Graduate

Basic Offshore Safety Induction & Emergency Training Including Additional OLF Modules and

Travel Safety By Boat (OPITO Approved)-Validity 06-Jan-2015

Career Summary

Eight years of experience in offshore construction and engineering as a technician commissioning

team. Specialists in Pipeline Pigging, Flooding, Hydro Test, Dewatering, Drying, Nitrogen Purging,

Commissioning & Decommissioning

He start his career in November 2004 in Oil and Gas Pipeline Installation and commissioning and he’s

project completion and work experience in Malaysia and Singapore.

During his time as a technician, he gained much experience in the offshore jobs for Cleaning, Hydro

Testing, Dewatering, Drying and Nitrogen Packing.

He is also familiar with the Blowing, Flushing and Leak Testing jobs.

Work Experience

Mechanic Jan 2010 to presentOffshore Construction Specialists Pte Ltd


53/68



Tel: +65 65679080 / Fax: +65 65678082

CURRICULUM VITAE

Responsible for the maintaining High Pressure pumps and Flooding Pumps in good condition after

project and prepare, function test of High Pressure pumps and Flooding Pumps before offshore work.

Operate and ensure High Pressure Pumps and Flooding pump working in good condition for Pre-

commissioning work.

Completed Projects:

Mechanic July 2013 – August 2013Offshore Construction Specialists Pte LtdProject : TIMAS-EHMRS Location : Indonesia – South China Sea

Provision of Engineering Services and Subcontract Equipment associated with the installation ofFlexible flowlines for COPI Belanak Project

Precom Technican

July 2013Project: Hess Exploration & Production Malaysia BV. FPSO for FPSO North Malay Basin –Grouting Project

Location: North Malay Basin (Kota Bahru)

Kamelia Field – precommissiong work for Flooding Production, Storage and offloading vessel Lewek Arunothai.

Mechanic January 2013 – April 2013Offshore Construction Specialists Pte Ltd

Project : Asian Energy Services – AES VSP Dangdo Thang Long Launch Location : Su Tu Vang Field, Thang Long-Dong Do Field, Vietnam

The preparation, rig up and execution of the jacket launch. The jacket weighed 4100mT was loadedand launch off the launch engineering, procedure preparation, physical barge rig up and sitesupervision and management of the launch operation, while Asian Energy performed the launch and

transportation engineering.

Mechanic August 2012 – January 2013Offshore Construction Specialists Pte Ltd



Task Description

Jetting Technician responsible for operating of jetting spread, monitoring the performance ofequipment and troubleshooting the jetting equipment in the event of equipment breakdown.


54/68



Tel: +65 65679080 / Fax: +65 65678082

CURRICULUM VITAE

Mechanic April 2012 to May 2012Offshore Construction Specialists Pte LtdProject : Conoco Philips Indonesia – Develop the Bawal FieldLocation : Bawal Field – Natuna Sea

Offshore Pigging and Hydrotesting work for 14” newly laid pipeline to connect the two Bawalwells (BW1 and BW2) to inline Tee and valve assemblies on the new pipeline, using rigidspools.

Mechanic

September 2011 – October 2011Offshore Construct ion Specialists Pte LtdProject : Kangean Energy Indonesia Ltd. –Pre-Commissioning Services for SubseaFacilit ies of TSB Field Development

Location : TSB Field, Kangean Block – Bali Sea Indonesia.Offshore Pigging and Hydrotesting work on DSV.Crest Odyssey of 25.745km x 18” RigidPipeline and 2 nos of 5.2km x 20” Rigid Pipelines

Mac 2011 – May 2011Offshore Construct ion Specialists Pte LtdProject : Dai Hung Field Development VSP -WHP DH2 JACKET LAUNCH ProjectLocation : VietsovPetro, Vung Tau, Vietnam

Commence reeving of port side sheave blocks using a messenger to pull 56mm wire through 500Tconstruction blocks back to 70t hydraulic winch. ‘Straight’ lace configuration. Launched with VSP-05(WD ~100m)

EMAS - Chevron Offshore (Thailand) Ltd.

HESS (Indonesia-Pangkah) Ltd Phase II Transportation and InstallationLocation - Surabaya, East Java Sea, IndonesiaTransport of CPP Deck, AUP Deck and LQ, Compression module, Bridges and flareboom

CPP and AUP Jackets were installed during the first campaign in the 4th Quarter 2010utilizing the DLB QP 2000. CPP and AUP jackets are 4 legged jackets with anapproximate unit weight of 300 tonne and 48” diameter steel pile foundations. The pileswere driven with a MHU270T to 95 meter penetration.

HESS Ujung Pangkah –Phase 1 Location - East Java Sea, IndonesiaTransporation and Installation of one 8 legged Well Head platform (WHP-B) and 3 pipelines (6”Gas lift, 12” Oil and 16” Gas) x ~5.5km between WHP-B and WHP-A (existing) including pre-commissioning.


55/68



Tel: +65 65679080 / Fax: +65 65678082

CURRICULUM VITAE

Kakap Field KG Gas Development Project – Provision of EPCI of KG Gas Development ProjectServices including pre-commissioning.

Project: REINSTATEMENT TEST FOR CAKERAWALATOP SIDE N2 HE LEAK TEST FOR BULAN A

Client: Pertonas CarigaliYear: (Dec) 2007Scope of work: Leak testing.

Project: EPCC of Segamat Compressor Station Expansion ProjectClient: PETRONAS GASYear: (July) 2007

Scope of work: Blowing,Flushing,Hydrotesting and Nitrogen Packing

Project: EPCC of Nutral Gas Disiribution to SemenyihFL stage 1/05 Jalan Persekutuan 1 Semenyih-Beranang

Client: Gas MalaysiaYear: (Mar) 2007

SCOPE OF WORK: CLEANING, HYDRO TEST, DEWATERING, DRYING, NITROGENPACKING.

Project: EPCC of Nutral Gas Disiribution to KundangFL DL stage 1/05 Kundang Sungai Buloh Selangor.

Client: Gas MalaysiaYear: (Jan) 2006Scope of work: Cleaning,Hydro Test,Dewatering,Drying,Nitrogen Packing

Project: EPCC of Nutral Gas Disiribution to Setiawan

FL stage 2/05 Setiawan Perak.Client: Gas MalaysiaYear: (Feb)2006Scope of work: Cleaning,Hydro Test,Dewatering,Drying,Nitrogen Packing.

Project: EPCC of Nutral Gas Disiribution to KaparFL stage 1/05,Kapar Klang Selangor.

Client: Gas MalaysiaYear: (Jan) 2006Scope of work: Cleaning,Hydro Test,Dewatering,Drying,Nitrogen Packing.


56/68



Tel: +65 65679080 / Fax: +65 65678082

CURRICULUM VITAE

Project: EPCC of Nutral Gas Distribution System to Sungai BulohFL Stage 3/05, Sungai Buloh selango

Client: Gas Malaysia.Year: (Dec)2005Scope of work: Cleaning, Hydro Test, Dewatering, Drying and Nitrogen Packing.

Project: EPCC of GPRW at Road B15 From SKVE to KVDT Precint 11,Putrajaya Selangor.

Client: Gas Malaysia.Year: (Dec)2005Scope of Work: Cleaning, Hydro Test, Dewatering, Drying and Nitrogen Packing.

PROJECT: EPCC OF NUTRAL GAS DISTRIBUTION SYSTEM TO NORTH PORTFL DL STAGE 1/05, PORT KLANG SELANGOR.

Client: Gas Malaysia.Year: (Nov)2005Scope of Work: Cleaning, Hydro Test, Dewatering, Drying and Nitrogen Packing.

Project: EPCC of Nutral Gas Disiribution to Bukit RambaiFL DL Stage 1/05 Bukit Rambai Melaka

Client: Gas MalaysiaYear: (Oct) 2005Scope of work: Cleaning,Hydro Test,Dewatering,Drying,Nitrogen Packing

Project: EPCC of Nutral Gas Disiribution to Tangga BatuFL DL Stage 1/05 Tangga Batu Area Melaka.

Client: Gas MalaysiaYear: (Sept)2005Scope of work: Cleaning, Hydro Test, Dewatering, Drying, Nitrogen Packing.

Project: EPCC of Nutral Gas Disiribution System to Ayer KerohFL DL Stage 1/04, Industri Area Ayer Keroh Melaka.

Client: Gas Malaysia.Year: (Sept)2005Scope of work: Cleaning, Hydro Test, Dewatering, Drying and Nitrogen Packing.

Project: EPCC of Nutral Gas Disiribution to IjokFL Stage 1/05, Ijok, Kuala Selangor

Client: Gas MalaysiaYear: (Jun) 2005


57/68



Tel: +65 65679080 / Fax: +65 65678082

CURRICULUM VITAE

SCOPE OF WORK: CLEANING, HYDRO TEST, DEWATERING, DRYING, NITROGENPACKING.

Project: EPCC of Nutral Gas Disiribution System to Pasir GudangFL DL Stage 1/05, Pan Century Edible Oils Sdn Bhd.

Client: Gas Malaysia.Year: (Sept)2005Scope of work: Cleaning, Hydro Test, Dewatering, Drying and Nitrogen Packing.

Project: EPCC of Nutral Gas Disiribution to Pulau Indah-WestportFL Stage 1/05, Pulau Indah Port Klang, Selangor .

Client: Gas MalaysiaYear: (May)2005Scope of work: Cleaning, Hydro Test, Dewatering, Drying and Nitrogen Packing.


58/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 1 of 3


NAME: INDRA JAYA

DATE OF BIRTH 24 February 1979


MARITAL STATUS Married

EDUCATION/TRAINING :

• Technical High School, Dabo Singkep

• Alkon, “Pressure vessel training”

• JRM, In-house, “Confined Space Entry And Rescue Training”

• JRM, In-house, “PTW Performing Training”

• JRM, In-house, “Pressure Vessel Training”

• JRM, In-house, “Dead Weight Tester Operating Training”

• AST, “ Over Head Crane Training”

• JRM, In-house, “BBSM”

LANGUAGES Bahasa Indonesian (written and spoken)

English (Fair Spoken)

Career Summary

Over 7 years experience in repair and maintain instrumentation for pressure, temperature and flowmeasurement device i.e. Dead Weight Tester, Pressure Recorder, Pressure Gauge, TemperatureGauge, Temperature Recorder, Turbine Flow Meter, Pinger Detector, Subsea Temperature device,for offshore pre-commissioning work including in-house calibration check, pipe fittings, familiar withrigging certification system and operating related machinery.

Instrument Technician March 2012 to presentOffshore Construction Specialists Pte Ltd

Responsible for the maintaining small flow High Pressure pumps, Pressure, Temperature and Flow

measurement device for Pigging and hydrotesting operation and grouting for the following projects in

Indonesia, Brunei and Myammar.


59/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 2 of 3


Current Project:

Work Experience

Technician/Mechanic


Project : Leighton OffshoreLocation : Jakarta - Cirebon

S513 Main Oil Line from X-Ray Field to Balongan Plant ProjectPost Trenching, Free Span Correction, and Pre-commissiong Services

Task Description

Sep to Oct 2013Offshore Construction Specialists Pte Ltd

Project : Su Tu Vang North East Development Project Location : Vietnam

Task Description

Responsible for performing the cleaning, gauging, flooding, hydrostatic testing of pipelinesHydrotesting & Precommissioning.

April 2013 – May 2013Offshore Construction Specialists Pte LtdProject : Swiber Shell - Air Lift JettingLocation : Bulan Bulan Field Development - Brunei

Jetting services for the Pile Refusal Remedial Project

Task Description Jetting Technician responsible for operating of jetting spread, monitoring the performance ofequipment and troubleshooting the jetting equipment in the event of equipment breakdown.

MechanicJanuary 2013 – April 2013Offshore Construction Specialists Pte LtdProject : PTTEPI – Installation of WP1, 2 and 3 well platforms and Intrafield SealinesLocation : Zawtika Field Development Project Phase I - Myamar

Offshore Pigging and Hydrotesting work on LTS 3000 for installation of WP1, 2, 3 Well Platformsincluding Jackets, Piles, jacket appurtenances and decks and WP2-ZPQ and WP3-ZPQ infieldpipelines.


60/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 3 of 3


MechanicApril 2012 to May 2012

Offshore Construction Specialists Pte LtdProject : Conoco Philips Indonesia – Develop the Bawal FieldLocation : Bawal Field – Natuna Sea

Offshore Pigging and Hydrotesting work for 14” newly laid pipeline to connect the two Bawal wells

(BW1 and BW2) to inline Tee and valve assemblies on the new pipeline, using rigid spools.

Hydrotesting Instrument Technician 26 January 2006 to 28 Feb 2012PT. McDermott Indonesia

Responsible for the maintaining all hydrotesting instrumentations and related equipment and gears in

good condition for onshore and offshore pre-commissioning work. Preparation of all related

instrumentation and hydrotesting gears, work side by side with field engineer for offshore work.

Maintenance of all JRM stinger for all air lines and water lines and tanks in good and water tight

condition.

Project Involved :

• Camau Project

• Kerisi Project

• Esso Project• SUTUVANG Project

• Sutuden Project

• Rubi Project

• Guntong A Project

• Guntong B Project

• Dai Hung Project

• Bien Dong Project

• TGT Project

• Angel Project

•

Chevron Project• Sakhalin Project

• Macedon Project


61/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 1 of 5


NAME: BUDIMAN SAGALA

DATE OF BIRTH 16 Jul 1983


MARITAL STATUS Single

MOBIL :+6281370977227 +6281372223565 EDUCATION/TRAINING :

• May 03, 2008 (MSTS) Tropical Basic Offshore Safety Induction & Emergency with EBS

• May 18, 2007 (J.Ray McDermott) Permit To Work

• December 21, 2006 (J.Ray McDermott) Confined Space Entry And Rescue

• November 27, 2006 (Indonesia Labor Department) Hoist Crane Operator

• May 2006, (DH. Budenberg) Dead Weight Tester Usage and Maintenance

• April, 2004 (Carl Stahl Evita Ltd), Level 1, Wire Rope Inspector

LANGUAGES Bahasa Indonesian (written & spoken)

English (fair spoken)

Career Summary

Over 12 years experience in repair and maintain instrumentation for pressure, temperature and flowmeasurement device i.e. Dead Weight Tester, Pressure Recorder, Pressure Gauge, TemperatureGauge, Temperature Recorder, Turbine Flow Meter, Pinger Detector, Subsea Temperature device,for offshore pre-commissioning work including in-house calibration check, pipe fittings, familiar withrigging certification system and operating related machinery.

Work Experience

Instrument Technician March 2009 to presentOffshore Construction Specialists Pte Ltd

Responsible for the maintaining small flow High Pressure pumps, Pressure, Temperature and Flow

measurement device for Pigging and hydrotesting operation for the following projects in Indonesia,

Thailand and Myammar.


62/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 2 of 5


Completd Project:

Technician

Jul 2013 – Sep 2013Offshore Construction Specialists Pte Ltd

Project : PERTAMINA EP - REROUTE GAS PL L-PARIGI-CILAMAYA Location : PT TIMAS SUPLINDO,INDONESIA

Provision of Engineering Services associated with the Provision of Hot Tap and pipeline Limacomplex by pass, perform the pipeline pre-commissioning on the assumption that the scope is asFlooding and gauging, hydrotesting, bulk dewatering and nitrogen packing to 5 psi pressure.

TechnicianNov – Dec 2013Offshore Construction Specialists Pte Ltd

Project : PT Timas SuplindoLocation : Jakarta

UL ProjectPre-commissiong Services

Task DescriptionOct 2013 – Nov 2013Offshore Construction Specialists Pte Ltd



Task DescriptionJan 2013 – Apr 2013Offshore Construction Specialists Pte Ltd

Project : PTTEP MYANMAR – L&T-Zawtika Grouting Project Location : PTTEP INTERNTIONAL LIMITED, Gulf of Moattama, Myanmar

Zawtika Field Development Project Phase 1A EPCI for WP1, WP2, WP3 and Intrafield Sealines –

Flooding, Gauging and Hydrotesting of pipeline.

TechnicianNovember 2012Offshore Construction Specialists Pte LtdProject : Galoc Ph 2 Development – Leak Testing for 6” Flexible pipeline ProjectLocation : Bien Dong Development Field - VietnamLeak test for flexible riser and flowlines for 1 off 3” Fuel Gas Riser (347.5 m length, 76.2 mm ID) + 3”Fuel Gas Flowline (2060 m length, 76.2 mm ID)


63/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 3 of 5


2 off 7” condensate riser (355.7 m and 365.5 m length, 177.8 mm ID) + 7” condensate flowline (2060m length, 177.8 mm ID).Task Description

Leak test for flexible riser and flowlines for 1 off 3” Fuel Gas Riser (347.5 m length, 76.2 mm ID) + 3”Fuel Gas Flowline (2060 m length, 76.2 mm ID) and 2 off 7” condensate riser (355.7 m and 365.5 mlength, 177.8 mm ID) + 7” condensate flowline (2060 m length, 177.8 mm ID).

TechnicianOctober 2011 – November 2011Offshore Construction Specialists Pte LtdProject : Korea Development Company LTD. – Gas Lift Compression Project.Location : Poleng Field – Gresik, West Java, Indonesia. Offshore Pigging and Hydrotesting work for newly laid pipeline 6” Gas Lift Pipeline DW-PP and 6” GasLift DW-PP in total length 6.3 Km.

TechnicianSeptember 2011 – October 2011Offshore Construction Specialists Pte LtdProject : Kangean Energy Indonesia Ltd. –Pre-Commissioning Services for Subsea Facilitiesof TSB Field DevelopmentLocation : TSB Field, Kangean Block – Bali Sea Indonesia.Offshore Pigging and Hydrotesting work on DSV.Crest Odyssey of 25.745km x 18” Rigid Pipeline and2 nos of 5.2km x 20” Rigid Pipelines

TechnicianFebruary 2011 – July 2011Offshore Construction Specialists Pte LtdProject : CHEVRON 2011 INSTALLATION CAMPAIGN.

PLATFORMS AND PIPELINES INSTALLATIONLocation : Chevron Thailand Oil and Gas Fields, Gulf of Thailand

Flooding and gauging work of newly laid pipelines:16” NPPLL, 5.4 Km Long Pipeline10” FUPLP, 5.9 Km Long Pipeline10” PDPLB, 6,7 Km Long Pipeline10” KPPLG, 2.7 Km Long Pipeline10” ERPLZC, 2.4 Km Long Pipeline

As well leak testing of spools before subsea tie in of:NPWL Platform (3 ea x 16” Spools)FUWP Platform (2 ea x 10” Spools)PDWB Platform (5 ea x 10” Spools)KPWG Platform (2 ea x 10” Spools)ERWZC Platform (2 ea x 10” Spools)

Technician January 2010 – March 2010


64/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 4 of 5



Project : Hess (Indonesia – Pangkah) Ltd. – Ujung Pangkah Development Project.

Location : Ujung Pangkah oil & gas field, East Java. IndonesiaPigging, Hydrotesting and Leak test work of 3 subsea flowlines, 6”, 12” and 16” between WHP B andWHP A.

TechnicianAugust 2009 to November 2009Offshore Construction Specialists Pte Ltd

Project : Star Energy Ltd. – Kakap Gas Development Project. Location : Kakap Field West Natuna, Indonesia. Offshore Pigging and Hydrotesting work for newly laid pipeline:

• 6” gas flowline, 2.3 Km long, KG-West 1 subsea wellhead to KG Platform,

• 6” gas flowline, 2 Km long, Lukah-1X subsea wellhead to KG Platform10” pipeline 11.2 Km long. KG Platform to KF Platform

TechnicianNovember 2008 – June 2009Offshore Construction Specialists Pte LtdProject : Gelagah Kambuna Field DevelopmentLocation : Malacca Strait, North Sumatra, Indonesia

Diameter 14” 42 Km long Pipeline installations from WHP Kambuna A to onshore receiving facilities,5km beach pull preparation operation (trenching Work), 10km jetting operation, lowering pipeline 2mtrTOP. Pre-commissioning of laid pipeline

Task DescriptionPreparation of pre-commissioning equipments for Pigging and Hydrotesting operation. Set up offshoreflooding and pigging operation for Diameter 14” 42 Km long newly laid Pipeline ensure sea waterchemical treatment composition against sea water as per company spec. Set up hydrotesting ofDiameter 14” 42 Km long newly laid Pipeline, operating Dead weight tester, monitor pressure andvolume indicator on hydrotesting operation on site under supervision of Pre-commissioning/ProjectEngineer.

TechnicianNovember, 2008 – June, 2009J.Ray McDermott

Project : Shell MalaysiaLocation : Terengganu, Malaysia

Task DescriptionPreparation of pre-commissioning equipments for Pigging and Hydrotesting operation. Ensure allrequired fittings to be complete for Pigging and hydrotesting set up. Set up offshore flooding andpigging operation for Diameter 14” 10km long pipeline and Diameter 28” 9km long pipeline, ensuresea water chemical treatment composition against sea water as per company spec. Set uphydrotesting of Diameter 14” 10km long pipeline and Diameter 28” 9km long pipeline, operating Dead


65/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 5 of 5


weight tester, monitor pressure and volume indicator on hydrotesting operation on site undersupervision of Pre-commissioning/Project Engineer.

Instrumentation TechnicianJuly 2001 – October 2008J.Ray McDermott

Marine Instrumentation and Rigging Certification Division

Task DescriptionPrepare of instrumentation for offshore pre-commissioning work. Ensure all pressure and temperaturemeasurement device i.e. Dead Weight Tester, Pressure Gauges, Temperature Gauge, PressureRecorder, Temperature Recorder, Holiday Detector, Pinger, Pinger Detector, Turbine Flowmeter andetc. in valid certificate and in-house checking all the mentioned instrumentation after project formaintenance.

Responsible of Leak test for offshore project installation aid fabricated in marine workshop i.e. PigLauncher, Pig Receiver, Spool Pipe and Test Header and etc.

Function test all the J.Ray McDermott Asia Pacific Stinger after maintenance in Batam, Marine facilitybefore attached to all J.Ray McDermott Pipe Lay Barge.

Responsible as well for ensure all rigging and lifting gears to be color coded and ensure all rigging tobe with valid certificate before send to offshore project.


66/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 1 of 3


NAME: IDHAM JAWAHIR

DATE OF BIRTH 1 Jul 1972

NATIONALITY IndonesianMARITAL STATUS Married

LANGUAGES Bahasa Indonesian (written & spoken)

English (fair spoken)

Career Summary

Over 8 years’ of experience in offshore construction and engineering as a technician commissioningteam. Specialists in Pipeline Pigging, Flooding, Hydro Test, Dewatering, Drying, Nitrogen Purging,Commissioning & Decommissioning.

Work Experience

Grouting/Pre-com March 2012 to presentOffshore Construction Specialists Pte Ltd

Responsible for the maintaining High Pressure pumps and Flooding Pumps in good condition afterproject and prepare, function test of High Pressure pumps and Flooding Pumps before offshore work.Operate and ensure High Pressure Pumps and Flooding pump working in good condition for Pre-

commissioning work.

Completed Project:

Precom Supervisor

September to October 2013Offshore Construction Specialists Pte Ltd




Task Description

Project : Su Tu Vang North East Development Project Location : Vietnam


67/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Page 2 of 3


Task Description

Responsible for performing the cleaning, gauging, flooding, hydrostatic testing of pipelines the

Hydrotesting & Precommissioning

Precom Supervisor

July 2013Project: Hess Exploration & Production Malaysia BV. FPSO for FPSO North Malay Basin

– Grouting ProjectLocation: North Malay Basin (Kota Bahru)

Kamelia Field – precommissiong work for Flooding Production, Storage and offloading vessel LewekArunothai.

Precom SupervisorJanuary 2013 – April 2013

Project : PTTEP MYANMAR – L&T-Zawtika Grouting Project Location : PTTEP INTERNTIONAL LIMITED, Gulf of Moattama, Myanmar

Zawtika Field Development Project Phase 1A EPCI for WP1, WP2, WP3 and Intrafield Sealines –Flooding, Gauging and Hydrotesting of pipeline.

Jetting TechnicianAugust 2012 – January 2013Offshore Construction Specialists Pte Ltd



Task Description Jetting Technician responsible for operating of jetting spread, monitoring the performance ofequipment and troubleshooting the jetting equipment in the event of equipment breakdown.

MechanicApril 2012 to May 2012Offshore Construction Specialists Pte Ltd

Project : Conoco Philips Indonesia – Develop the Bawal FieldLocation : Bawal Field – Natuna Sea

Offshore Pigging and Hydrotesting work for 14” newly laid pipeline to connect the two Bawal wells

(BW1 and BW2) to inline Tee and valve assemblies on the new pipeline, using rigid spools.

Senior MechanicMay 2005 – Dec 2011PT. Sea Struck Indonesia


68/68



Tel: +65 6567-9080 / Fax: +65 6567-8082

CURRICULUM VITAE

Location : Batam, Indonesia

Fabrication yard facility maintenance

Task Description Maintain all running heavy equipments and engines in Batam fabrication yard including: fork lift,hydraulic crane, loader, generators and compressors.

precommissioning procedure

Documents