1

MYSmart™ series MYD10™/MYD50™ In-line dispensers

Precise and fl exible dispensing systems

2 3

Introducing the MYD seriesFully automated compact dispensingThe MYSmart series off ers a wide range of in-line dispense solutions togetherwith a comprehensive portfolio of valve technologies. The compact MYD10enables highly advanced non-contact jetting for enhanced dispensinguniformity, throughput and material utilization. For higher-precisionapplications such as complex chip packaging, the powerful MYD50 platformfurther boosts productivity with linear motor motion control. The MYSmartin-line dispensing solutions, proven in the most advanced productionenvironments, make it possible to handle a vast array of current and emergingproducts, assembly fl uids and package types.

1. Unsurpassed value by combining high end technology with low total cost of ownership.2. From underfi ll to solder paste the MYD series off ers many unique jetting technologies off ering enhanced fl exibility for high volume manufacturing.3. Built in AVI capabilities enables automatic inspection of dispense results.

MYD series automated in-line dispensing systemscan handle a wide range of dispensing applications.

FLEXIBLEMYD series can handle diff erent substrate sizes andcompositions to meet specifi c process requirements.A lot of diff erent applications can be achievedthrough possibilities such as tilt and rotate, contactand non-contact heating and dual head confi gura-tions.

COST-EFFICIENTSmaller machine dimensions, high quality build andstreamlined mechanical design allow the system torun for longer periods of time with less maintenance

and lower downtimes. The reduced amount of wearparts in our jets further reduce cost of ownershipmaking the MYD series a cost-eff ective dispensingmachine.

IMPROVED PRODUCTIVITYPrecise temperature controls, on-the-fl y fi ducialsearch, robust vision algorithms, low motion Z axisand non-contacting dispensing are some of thefeautures included to increase productivity.

– Unmatched production value

– Non-contact jetting technology

– Semi- or full automation

– Low maintenance and long service life

– High-precision dispensing volume control

4 5

MYD seriesCross-industry capableplatformThe MYD series automatic inline dispensing system is proven across many industries such as electronics, medical devices, optics and industrial assembly to name a few.

CONSUMER ELECTRONICSKEY APPLICATIONS, CONSUMER ELECTRONICS- Hot melt- Underfill- Pin encapsulation- Conformal coating- Edge/corner bonding- Surface mount package- Package on package- Dam and fill- SMA- FPC component- Reinforcement materials

SMT ELECTRONICS

AUTOMOTIVE ELECTRONICS

LED AND MEDICAL INDUSTRY

76

MYD Series Core ComponentsHighest Throughput, lowest cost of ownership

UNIQUE CAPABILITIESThe MYD jet valves and pumps can produce high drop velocity, allowing a wide range of fl uids and applications.It is easy to change the drop velocity to fi ne tune the dispensing process and achieve a high process capability.

PRECISE CONTROLSClosed loop controls and system feedback are key for higher yields. Focus on smart jetting controls, closed loop substrate heating, user specifi ed temperature spot checks and closed loop material dispense are the foundation of quality output.

SIMPLE MAINTENANCEThe MYD jet valves are designed with simplicity andease of use in mind. Minimal disassembly required and wear parts are easily replaced.

Diff erent types of jet valves provide wide range of capabilities to optimize your process based on your specifi c materials. For large fl ow applications, auger valves and positive displacement pumps decrease cycle time while maintaining tight process controls. All jets, valves and pumps are designed with speed, durability and precision in mind.

8 9

MYD seriesKey features

DUAL LANE CONVEYORSDual lane help in maximizing your production lineand optimizing throughput. Two diff erent jobs canrun on each line.

CONFIGURABLE CONVEYOR STATIONSEdge clamps, vacuum blocks, vacuum heating andnon-contact heating modules off er all the potentialmaterial handling options for eff cient dispensing

TILT OPTIONS Pneumatic and electrical tilt and rotate options enable precise material dispense in diffi cult to reach locations. Individual angle off sets are programmed for precise dispensing.

DUAL VALVE CONFIGURATIONSSynchronous dual valve; two heads work at the sametime to save cycle time and improve productivity.Asynchronous dual valve; two heads work at diff erenttime. Diff erent materials can be used on each valve.

TEMPERATURE SPOT CHECKUser programmable location where exact temperature is measured and verifi ed with programmable go/no-go logic.

AUTOMATIC VISUAL INSPECTIONAVI, automatic visual inspection, improves inspection quality and helps automate the production line. The AVI can be setto warn, fl ag and log production results increasing yield traceability and visibility.

10 11

MYD10/MYD10I in-line Specification

MYD50 in-line SpecificationFACILITY REQUIREMENT MYD50

Power 220 V, 2 KW, 10 A, 60 Hz

Air supply 90psi(6bar)

System dimention(W*D*H) 770*1260*1450mm

System weight 900KG

Standard compliance CE

MOTION SYSTEM

Positioning accuracy XY: ±25um@3σ Z:±10um@3σXYZ Repeatability XY: ±10um@3σ Z:±5um@3σMax speed 1300mm/s(XY)

Acceleration 1.3g

Resolution 640*480 px (30w)

Drive system Linear motor

BOARD HANDLING

Conveyor type Belt

Tool payload capacity 3KG

Min. board/carrier width 50mm

Max. board/carrier width 500mm

Min. board/carrier length 50mm

Max. board/carrier length 350

Operating system Windows 7

Board thinckness range 0.5-0.6mm

Communication protocol SMEMA

DISPENSE AREA

Single lane 350*500mm

Dual lane 350*215mm

STANDARD FEATURES OPTIONAL FEATURES

Single lane Dual lane

Vison module Non-contact heating module

Vacuum cleaning Vaccum absorbtion platform

CCD vision system Dual valve module

Audible alarm Low fluid level sensor

Nozzle heating Tilt and rotate

Supports 30 cc / 50 cc syringe Electronic scale

Dispensing software Automatic needle calibration

X, Y, Z fiducial calibration platform Barcode reading function module (with camera)

IPC Barcode reading function module (with barcode reader)

Left-right. Right-left conveyor Laser height detecting module (30 ± 4mm)

Jet valve

Temperature spot check

MYD10 MYD10I

220 V, 2 KW, 10 A, 60 Hz 220 V, 2 KW, 10 A, 60 Hz

90psi(6bar) 90 psi(6bar)

770*1200*1400mm 890*1500*1500mm

650KG 750KG

CE CE

XY: ±30um@3σ Z:±10um@3σ XY: ±30um@3σ Z:±10um@3σXY: ±15um@3σ Z:±5um@3σ XY: ±15um@3σ Z:±5um@3σ

1000mm/s (X,Y) 1000mm/s (X,Y)

1.0g 1.0g

640*480 px (30w) 640*480 px (30w)

AC servo AC servo

Belt Belt

3 kg 3 kg

50mm 50mm

475mm 475mm

50mm 50mm

350mm 350mm

Windows 7 Windows 7

0.5~6mm 0.5~6mm

SMEMA SMEMA

350* 475mm 440* 760mm

350* 210mm 440* 350mm

STANDARD FEATURES OPTIONAL FEATURES

Single lane Dual lane

Vison module Non-contact heating module

Vacuum cleaning Vaccum absorbtion platform

CCD vision system Dual valve module

Audible alarm Low fluid level sensor

Nozzle heating Tilt and rotate

Supports 30 cc / 50 cc syringe Electronic scale

Dispensing software Automatic needle calibration

X, Y, Z fiducial calibration platform Barcode reading function module (with camera)

IPC Barcode reading function module (with barcode reader)

Left-right. Right-left conveyor Laser height detecting module (30 ± 4 mm)

Jet valve

Temperature spot check

12

40

126

48

Rev

00

04

/ O

cto

ber

20

19

NETHERLANDSMycronic B.V.

High Tech Campus 105656 AE

EindhovenNetherlands

Tel: +31 402 62 06 67

SINGAPOREMycronic Pte., Ltd.

9 Tagore Lane, #02-08/099@Tagore

Singapore 787472Tel: +65 6281 7997

SOUTH KOREAMycronic Co. Ltd.

3rd Floor, Jung-SanBldg. 1026-8

Sanbon-Dong, Gunpo-SiGyeonggi-Do, 15808

South KoreaTel: +82 31 387 5111

UKMycronic Ltd.

Unit 2, Concept ParkInnovation Close

Poole, Dorset, BH12 4QTUK

Tel: +44 1202 723 585

USAMycronic Inc.

320 Newburyport TurnpikeRowley, MA 01969

USATel: +1 978 948 6919

mycronic.com

SWEDENMycronic ABPO Box 3141Nytorpsvägen 9SE-183 03 TäbySwedenTel: +46 8 638 52 00

CHINA Mycronic Co., Ltd.Unit 106, E BlockLane 168, Da Duhe Road. Putuo District, 200062Shanghai P.R. ChinaTel: +86 21 3252 3785/86

FRANCEMycronic S.A.S.1 rue de Traversière - CS 8004594513 Rungis Cedex 1FranceTel: +33 1 41 80 15 80

GERMANYMycronic GmbHBiberger Straße 93D-82008 Unterhaching bei MünchenGermanyTel: +49 89 4524248-0

JAPANMycronic Technologies KKChofu Center Bldg.1-18-1 Chofugaoka, Chofu-shiTokyo 182-0021JapanTel: +81 42 433 9400

Specifications are subject to change without notice.Mycronic, MYDATA, MYDATA automation and MY; Mycronic 4.0; MYPro, MY100, MY100DX, MY100SX, MY100LX, MY100e, MY100HXe, MY100DXe, MY100SXe, MY100LXe, MY200,

MY200HX, MY200DX, MY200SX, MY200LX, MY300, MY300DX, MY300SX, MY300LX, MY500, MY600, MY600JD, MY600JP, MY600JX, MY700, MY700JD, MY700JP, MY700JX andMYSynergy; Mycronic 4.0; MYSmart, MYC50, MYD10, MYD50, MYT10, MYT50; T3, T4, T5 and T6; HYDRA Speedmount, Midas, ISIC; Agilis, Agilis Linear Magazine (ALM), Agilis Linear

Magazine Flex (ALM FLEX), Agilis Stick Magazine (ASM), Agilis Tray Magazine (ATM), Mycronic Tray Exchanger (TEX), Mycronic Tape Magazine (TM), Mycronic Tray Wagon Magazine(TWM); Mycronic Dip Unit (DPU); Mycronic SMD Tower; Mycronic Standard Vision System (SVS), Mycronic Dual Vision System (DVS), Mycronic Linescan Vision System (LVS), Mycronic

HYDRA Vision System (HVS); Mycronic Assembly Process Management (APM) including; JPSys, TPSys, MYLabel, MYPlan, MYCenter, MYTrace, MYCam, FlowLine and Cad Conversionare registered trademarks or trademarks of Mycronic AB. Mycronic AB is ISO 9001:2015 and ISO 14001:2015 certified.