powell industrial catalogue – hydraulic hoses · hydraulics – hoses hydraulic hoses 1 & 2...

Version 2

HydRAUlICS> Hoses

Powell Industrial, formerly known as Tony Powell Hose and Fittings, was established over thirty years ago and is now Australia’s largest family owned Industrial Hose, Fittings and Rubber products supplier.

Our businesses key focus is:• Industrial Trade customer base who requires supplier expertise in the

Industrial Hose, Fittings and Rubber market• Trained knowledgeable staff• Great team culture dedicated to genuine customer service• Best Service. Best Value. Best Advice.

This, our latest trade catalogue, has an increased range of trade relevant information, including our exclusive ‘Hose Management Program’, easy reference conversion and chemical compatibility charts and more products exclusive to Powell Industrial.

Since our last catalogue was produced, Powell Industrial has gone through a number of major changes. We’ve acquired two major Hose, Fittings and Rubber retailers, Fluid Handling Solution (FHS) and Purple Pig. These additions have built us into a nationwide operation, now totalling twelve branches around Australia. Together, these three companies and their long associated histories in the industrial goods market, encompass well over fifty years of experience. Each company has played a major role in shaping today’s Hose, Fittings and Rubber market and now all under the Powell Industrial banner offer Australia a strong and experienced brand for customers to engage with.

It’s also aided in us establishing a larger and more specialised product range, which is highlighted in this new catalogue. Many of your favourite and most trusted brands and their products, from all three companies, can now be purchased from under the one roof. Greater choice and value has never been this easy to obtain from one retailer.

I would like to take the opportunity to thank you for your past support and along with the team at Powell Industrial look forward to being of service to you now and long into the future.

Don McDonaldManaging Director

INtrOductION

Best Service. Best Value. Best Advice.

In focusing on our customer base, we’ve:Based on our in house intellectual property and know how, from more than thirty years in the Industrial Hose and Fittings and Rubber business, increased our range of trade dedicated products.

More convenient trade opening hours. Monday to Friday – check with your local branch.

Further developed our HMP (Hose Management Program) including our PRS (Powell Rapid Service) for emergency Hose testing and replacement requirements.

Increased branch locations for better, more convenient service.

COMING SOON – New Website featuring customer login and online ordering facility for your favourite products.

group Codeeg 02 is for PVC Suction Hoses

Understanding the Powell Industrial part numbering systemIt goes without saying, but we have an enormous range of product lines available to purchase. And in each of these products lines exists a great number of variations to the line whether it be size, material etc. More often than not it can be very confusing when attempting to order or identify the products we sell. This is why we've created a part numbering system to assist with the ordering and identification of our products, not only for customers but also for our staff. By following the below formula it should make the process of purchasing and identification of products easier.

Hose Part Number Example:

Sub-groups – Hoses

Fittings Part Number Example:

Sub-group Codeeg 000 is for AIR/WATER hose – Performer Grey Suction Hose

Size Codeeg 102 is for 102 mm ID

Length Codeeg 20 is for 20 metres

02 - 000 -102 - 020

group Codeeg 25 is for Valves

Sub group Codeeg 000 is for Standard Ball Valves - Female x Female

Size Codeeg 32 is for 2 Inch

25 - 000 - 032

NB: All ID of Hoses are Nominal Bore and listed in Metric numbers

NB: Fittings however are general inch fittings - i.e. 4" Valve or 2" BSP x 2" Hose Tail etc As such we list all inch fittings in 1/16th of an inch as per our sizing chart. See the following pages.

Hoses Sub-groups Product Use

000 - 199 AIR / WATER

200 - 300 MULTIPURPOSE

300 - 399 HOT WATER / STEAM

400 - 599 FUEL / OIL / PETROLEUM BASED

600 - 799 FOOD GRADE

800 - 899 MATERIAL HANDLING

900 - 990 CHEMICAL HOSE

Hose AssembliesStandard Stock Hose Assemblies are listed with the applicable Sub-Group of hose with the number '9' added before the size of the hose to define it as an assembly.

eg 04-000-9051-020CEW

Part NumBer HOw tO guIde

Sizing ChartThis table executes the metric and imperial formulas used to devise the size code component for the Powell Part Numbers of all fittings.

Exceptions: Camlocks have been coded as per their type – a 2" C-Type camlock is now a C200 (200 being 2"). The usual Sub-Group Part Number component refers to the material (and or use) of the camlock. See below.

Naturally there are other exceptions where it is not possible to fit the above.

Metric (mm) Part Number size Imperial Part Number size (Inches) Part Number dash size

3 -003 1/8 -002

5 -005 3/16 -003

6 -006 1/4 -004

8 -008 5/16 -005

10 -010 3/8 -006

12 -012 1/2 -008

16 -016 5/8 -010

20 -019 3/4 -012

22 -022 7/8 -014

25 -025 1 -016

32 -032 1¼ -020

38 -038 1½ -024

44 -044 1¾ -028

51 -051 2 -032

63 -063 2½ -040

76 -076 3 -048

88 -088 3½ -056

102 -102 4 -064

114 -114 4½ -

127 -127 5 -080

140 -140 5½ -

152 -152 6 -096

165 -165 6½ -

178 -178 7 -112

203 -203 8 -128

254 -254 10 -160

305 -305 12 -192

356 -356 14 -224

406 -406 16 -256

457 -457 18 -288

508 -508 20 -320

559 -559 22 -352

610 -610 24 -384

Camlocks group & Sub-group Material (and or use)

20-000 ALUMINIUM

20-100 ALUMINIUM - MIL SPEC & ADAPTORS

20-200 STAINLESS STEEL

20-300 BRASS

20-400 BRONZE

20-500 POLYPROPYLENE

20-600 NYGLASS

20-700 DRY DISCONNECT

20-800 SAFETY BUMPS

20-900 SPARE PARTS- SEALS ETC


Product groups group Codes for Part Numbers

Hoses & Hose Assemblies

00 - PVC Pressure

02 - PVC Suction

04 - Layflat

06 - Ducting

08 - Rubber - Extruded

10 - Rubber - Wrapped

16 - Composite

19 - Assembly components (Crimp Shells & Ferrules)

Fittings (Hose Couplings) 20 - Camlocks

21 - Claw, Muff, Irrigation, Bauer & Travis Couplings

22 - Hose Tails (metal)

23 - Fire (CFA, MFB, QRT etc)

25 - Valves (Ball, Gate, Foot, Butterfly etc)

27 - Hose Tails (Plastic)

28 - Guns & Nozzles, Gauges (Domestic Garden)

Pneumatics 30 - Quick Release Couplings

31 - Tubing

32 - Push In Fittings (All)

33 - Brass Tube Fittings - Compression, Flare etc

34 - Stainless Steel Compression Fittings

36 - Pneumatics, Filters, Regulators & Components

Clamps & Clamping Systems

40 - Wormdrive Clamps

42 - Super Clamps (T-Bolts)

43 - Double Ear & O'Clips (Specialist Clamps)

44 - Industrial Clamps (Spiral, HPC, Double Bolt etc)

45 - Cable Ties

46 - BAND-IT Bands & Banding

47 - Pipe Clamps (P-Clamps)

48 - Hydraulic Tube Clamps

49 - Miscellaneous Clamps, Unicoil etc

Product groups group Codes for Part Numbers

Fittings (Screwed) 50 - Brass Screwed

51 - Aluminium Screwed

52 - Gal Mal & Carbon Steel (3000 lb)

53 - Buttweld & Flanges

54 - Stainless Steel Screwed & Buttwelds

55 - Stainless Steel Sanitary (Food BSM, Triclovers, Wine)

58 - Plastic Screwed & Air Pipe Fittings

59 - Roll Grooved, Shoudered Couplings

Hose Reels 60 - Hose Reels

Accessories & Consumables

61 - Tyre Inflation, Tyre Chucks & Air Guns

63 - Meshes (Oyster, Barrier)

64 - Greasing Equipment, Lubrication, Oil

65 - Workshop Equipment

66 - Pipe Repairers, Putty & Wraps

67 - Tapes & Sealants (Teflon Tape)

68 - Spill Control & Abrasives

69 - Tools (Pipe Cutters, Benders, Crimping)

24 - Drilling Fluids

Rubber 70 - V-Belts

71 - Pulley & Taperlock

75 - Sheet, Insertion, Matting & Flooring, Profiles & Sponges

77 - Vibration Mounts

Hydraulics 80 - Hydraulic Hose

81 - Crimp Hydraulic Hose Fittings

82 - Hydraulic Adaptors

83 - Hydraulic Tube Fittings (Steel Compression Style)

85 - Ferrules (Brass, Aluminium, Stainless Steel)

86 - Hydraulic Valving, Crimpers & Components

88 - Hose Protectors (Spiral Guard & Whipchecks)

Merchandising 90 - Merchandiser Stands and Parts

Product group Codes

Hose Length Part Number ComponentWhere hose Part Numbers are listed you may notice three astericks sitting in the Length Code component of the Part Number. These three astericks have been used to identify that either multiple or custom lengths of this hose, up to the listed maximum length documented in the table, can be purchased.

eg 04-000-051-***


Rubber 15PVC Pressure 63PVC Suction 79Layflat 91Ducting 97Composite 105

Camlocks 111 Hose Tails 127 Couplings 139Clamps 149Valves 169Brass Screwed 185Pipe Fittings 193Stainless Steel Screwed 213Polypropylene/Nylon 225Guns & Nozzles 235Domestic Garden 245

Pneumatic Tube & Air Pipe 249Pneumatic Push-In 255Pneumatic Quick Couplings 263Pneumatic Accessories 275

Manual & Automatic Rewind 279

Rubber Sheet 291Matting 299Rubber Profiles 302Foam Tapes 307

Hydraulic Hoses 311Hydraulic Hose Tails 321Hydraulic Adaptors 329Hydraulic Quick Couplings 335Hydraulic Accessories 343

Spill Control 348Thread Tapes, Adhesives, Pastes & Sealants 354Hose Protectors 357Mesh 359V-Belts 362Drilling Mud & Accessories 364

Conversion Charts & Equations 374Hose Properties 379Chemical Resistance Charts – PVC & General 385Terms & Conditions of Agreement 401

If you are having trouble finding the product you require please don't hesitate to contact your local Powell Industrial Branch for assistance.

Contact details can be found on the back cover for all our branches.

IMPORTANT NOTES: You are currently viewing a single section or sub-section of the entire Powell Industrial Product Catalogue – Version 2.

This Table of Contents is the universal page numbering for all sections combined and therefore this copy may not reflect what is found in this document. Each of these sections (in green) and their sub-sections can be viewed and downloaded directly from our website.

If you'd like a printed copy of this catalogue please call you local Powell Industrial branch. The final page of this catalogue section houses all branch contact details.

All products found in this catalogue may not be readily available at every Powell Industrial branch.

HOses 15–110

fIttINgs 111–248

PNeumatIcs 249–278

HOse reels 279–290

ruBBer 291–310

HydraulIcs 311–346

accessOrIes & cONsumaBles 347–372

INdex 403–406

cHarts & taBles 373–407

taBle Of PrOduct cONteNts

311

HYDRAULICS – HOSES

HYDRAULIC

HOSES

1 & 2 WIRE HYDRAULIC HOSES

THERMOPLASTIC

PRESSURE WASHER

PUSH-LOCK

JACKING

MARINE

STAINLESS STEEL

HOSES

FITTIN

GS

PNEUMATIC

SHOSE R

EELS

RUBBER

ACCE

SSORIES &

CO

NSUMABLE

S

HYDRAULIC –HOSES

312

HYDRAULIC

HOSES

HOSES

FITTINGS

PNEUMATICS

HOSE R

EELS

RUBBER

ACC

ESSORIES &

CO

NSUMABLE

S

Two Wire Hydraulic HoseEconomical hose for high pressure hydraulic lines on mobile equipment and general agricultural use.

REINFORCEMENT: Steel wire (1)INNER TUBE: Oil resistant.COVER: Wrapped black.BRANDING: Red lettering.TEMPERATURE: -40ºC TO +100ºCSTANDARDS: DIN EN853 2SN - exceeds SAE100R2 (two wire)

ADVANTAGES:• Economical• Flexible• Use with crimp or field attachables fittings• Flame resistant

Part NumberID Nom.

OD Max. WP Burst Pressure

Suggested Coupling Lengths

Inches mm psi (mPa) psi (mPa) - metres

80-002-004 1/4 15.0 5805 23200 2 Piece/RU 215

80-002-006 3/8 19.0 4790 19140 2 Piece/RU 140

80-002-008 1/2 22.2 3990 15950 2 Piece/RU 100

80-002-012 3/4 29.3 3120 12325 2 Piece/RU 130

80-002-016 1 38.1 2395 9325 2 Piece/RU 85

80-002-020 1¼ 48.3 1815 7250 2 Piece Coil

Gates PowerClean™

1-Wire Pressure Washer Hose – BlueHigh pressure cleaning hose ideal for hot or cold water cleanup at food handling and processing operations, meat and poultry plants, creameries, paper mills and other facilities.

REINFORCEMENT: High tensile steel one-wire braid.INNER TUBE: Nitrile.COVER: Blue C2 Modified Nitrile.BRANDING: White lettering.TEMPERATURE: -40ºC TO +121ºC

ADVANTAGES:• Smooth non-marking blue cover• Hot, cold and steam injected water use• Durable• Up to 5000 psi pressure ratingNB: Not recommended for steam service

Part NumberID Nom.


Suggested Coupling Weight Lengths

Inches mm psi psi - kg/m metres

80-110-004 1/4 13.5 3000 12000 1 or 2 Piece 0.27 91R

80-110-006 3/8 18.8 5000 20000 1 or 2 Piece 0.16 91R

80-110-008 1/2 21.8 4000 16000 1 or 2 Piece 0.19 91R

One Wire Hydraulic HoseEconomical hose for medium pressure hydraulic lines on mobile equipment and general agricultural use.

REINFORCEMENT: Steel wire (1)INNER TUBE: Oil resistant.COVER: Wrapped black.BRANDING: White lettering.TEMPERATURE: -40ºC TO +100ºCSTANDARDS: DIN EN853 1SN – exceeds SAE100R1 (one wire)

ADVANTAGES:• Economical• Flexible• Use with 2-piece field attachable fittings• Flame resistant

Part NumberID Nom.



Inches mm psi psi - metres

80-001-004 1/4 13.4 3265 13050 2 Piece/RU 250

80-001-006 3/8 17.4 2610 10440 2 Piece/RU 150

80-001-008 1/2 20.6 2320 9280 2 Piece/RU 105

80-001-012 3/4 27.7 1525 6090 2 Piece/RU Coil

80-001-016 1 35.6 1275 5075 2 Piece/RU 85

R= Reel

HYDRAULIC –HOSES

313

HYDRAULIC

HOSES

HOSES

FITTIN

GS

PNEUMATIC

SHOSE R

EELS

RUBBER

ACCE

SSORIES &

CO

NSUMABLE

S

100R5 - J1402 - SAE / USCG Listed Hose

REINFORCEMENT: One textile braid and one braid of high tensile steel.INNER TUBE: Black Nitrile.COVER: Fabric.BRANDING: White Lettering.TEMPERATURE: -40ºC TO +150ºCSTANDARDS: 100R5 - J1402 - SAE/ USCG Listed

ADVANTAGES:• For use with R5 field attachables common on trucks

Part NumberID Nom.




80-005-004 3/16 13.2 3000 12000 20/R5 150

80-005-006 5/16 17.27 2250 9000 20/R5 120

80-005-008 13/32 19.56 2000 8000 20/R5 160

80-005-010 1/2 23.37 1750 7000 20/R5 125

80-005-012 5/8 27.43 1500 6000 20/R5 80

80-005-016 7/8 31.24 800 3000 20/R5 46

Parker Hydraulic Jacking HoseFor hydraulically powered jacking applications.

REINFORCEMENT: Steel wire (2)INNER TUBE: Synthetic rubber.COVER: Smooth black Nitrile.BRANDING: White lettering.TEMPERATURE: -40ºC TO +49ºCSTANDARDS: MHSA approved. Certified and tagged assemblies

ADVANTAGES:• 10,500 psi maximum working pressure• Engineered inner tube provides exceptionalhydraulic fluid compatibility• No-Skive design eliminates the need to remove hose cover before crimping

Part NumberID Nom.



Inches mm psi (mPa) psi (mPa) - kg/m metres

80-500-JK-004 1/4 15 10500 (72.4) 21000 (145) 43 0.39 Assembly

80-500-JK-006 3/8 22 10000 (70) 20000 (140) 43 0.55 Assembly

Gates Lock-On Hose LOL Plus HoseFor a wide range of low pressure transfer applications including petroleum based hydraulic oils, water, glycol antifreeze solutions, hot lubricanting oils and air.

Designed to accommodate lock-on fittings.

REINFORCEMENT: Braided, high tensile synthetic textile cord.INNER TUBE: Black Type C Nitrile.COVER: Type C2 (Modified Nitrile). Other colours available.BRANDING: White lettering.TEMPERATURE: -40ºC TO +100ºC

ADVANTAGES:• Multiple application uses• For use with lock-on fittings and crimp tailsNB: Not recommeded for petrol and diesel applications

Part NumberID Nom.



Inches mm psi (mPa) psi - metres

80-600-3284-004 1/4 11.9 300 (2.07) 1200 82 91

80-600-3284-005 5/16 14.0 300 (2.07) 1200 82 91

80-600-3284-006 3/8 15.9 300 (2.07) 1200 82 91

80-600-3284-008 1/2 19.6 300 (2.07) 1200 82 91

80-600-3284-010 5/8 23.9 300 (2.07) 1200 82 76

80-600-3284-012 3/4 26.9 300 (2.07) 1200 82 69

All 80-600-3284-*** hoses come in a standard black over. Other cover colours available. Simply add the following colour abbreviation to end of the Part Number for the colour you require. BL=Blue, RD= Red, YL=Yellow, GY=Grey, GR=Green

NB: Only sold in assembly form.

Blue: Part number prefix 80-500-206

HYDRAULIC –HOSES

315

HYDRAULIC

HOSES

HOSES

FITTIN

GS

PNEUMATIC

SHOSE R

EELS

RUBBER

ACCE

SSORIES &

CO

NSUMABLE

S

Parker Marine Steering Hose – MSH SeriesFor use in a wide range of marine applications, especially marine hydraulic steering systems.

REINFORCEMENT: Fiber.INNER TUBE: Nylon.COVER: Black Polyurethane.BRANDING: White lettering.TEMPERATURE: -40ºC TO +93ºC

ADVANTAGES:• Fast, accurate response• Permanent or field attachable• Salt water, corrosion resistant

Part NumberID Nom.




80-500-MSH-005 8.00 12.19 1000 4000 MS Coils

80-500-MSH-006 10.00 14.98 1000 4000 MS Coils

100R7 Thermoplastic HoseUsed for medium pressure hydraulic service on agricultural equipment and steam cleaning lines.

REINFORCEMENT: One braid of polyester fiber.INNER TUBE: Oil resistant polyester.COVER: Black Polyurethane.TEMPERATURE: -40ºC TO +100ºCSTANDARDS: SAE100R7

ADVANTAGES:• Light weight• Conductive abrasion resistant cover

Part NumberID Nom.




80-007-002 1/8 8.1 3000 12000 57 0.074 100

80-007-004 1/4 12.4 2750 11000 55/2-piece 0.105 100

80-007-006 3/8 15.7 2250 9000 55/2-piece 0.178 100

80-007-008 1/2 19.3 2000 8000 55/2-piece 0.218 100

100R8 Thermoplastic HoseUsed for high pressure hydraulic service on Industrial & agricultural equipment where a non-conductive hose is required.

REINFORCEMENT: One braid of polyester fiber.INNER TUBE: Oil resistant polyester.COVER: Black.TEMPERATURE: -40ºC TO +100ºCSTANDARDS: SAE100R8

ADVANTAGES:• Light weight• High pressure

Part NumberID Nom.




80-008-004 1/4 12.4 5000 20000 2 Piece 0.119 100

80-008-006 3/8 15.7 4000 16000 2 Piece 0.178 100

80-008-008 1/2 19.3 3500 14000 2 Piece 0.238 100

Twinline and other sizes available to order on request.

HYDRAULIC –HOSES

316

HYDRAULIC

HOSES

HOSES

FITTINGS

PNEUMATICS

HOSE R

EELS

RUBBER

ACC

ESSORIES &

CO

NSUMABLE

S

Parker 518C 100R7 Thermoplastic Hose – Non-conductive Medium pressure, non-conductive hose for reusable or permanent fittings.

REINFORCEMENT: FiberINNER TUBE: Co-polyesterCOVER: Orange PFX Proprietary Blend.BRANDING: Black lettering.TEMPERATURE: -40ºC TO +100ºCSTANDARDS: SAE 100R7 & SAE J517

ADVANTAGES:• Excellent abrasion resistance• Non-conductive

Part NumberID Nom.




80-500-518C-004 1/4 11.94 3000 12000 55 Coils

80-500-518C-006 3/8 16.25 2250 9000 55 Coils

80-500-518C-008 1/2 20.57 2250 9000 55 Coils

Gates RFS – Red Fire Suppression HoseFor use in low-pressure powder fire suppressant applications in mining, forestry and fire fighting equipment.

REINFORCEMENT: One braid of high-tensile steel wire.INNER TUBE: Nitrile C.COVER: Red modified Nitrile C2.BRANDING: White lettering.TEMPERATURE: -40ºC TO +100ºCSTANDARDS: SAE 100R1 & MSHA 2G

ADVANTAGES:• The red cover is for easy visual identification in these applications• Oil and abrasion resistant cover

Part NumberID Nom.




80-080-004 1/4 13.46 2750 11000 2 Piece or RU Reel

80-080-008 1/2 20.32 2000 8000 2 Piece or RU Reel

80-080-012 3/4 27.68 1250 5000 2 Piece or RU Reel

Stainless Steel True Bore Teflon hoseFor use with corrosive and/or high temperature fluids and food products.

REINFORCEMENT: One braid of high tensile stainless steel wire.INNER TUBE: White extruded Teflon.COVER: Stainless Steel wire braided.TEMPERATURE: -60ºC TO +260ºCSTANDARDS: Meets FDA requirements.

ADVANTAGES:• Smooth bore• High temperature use

Part NumberID Nom.



Inches mm psi (mPa) psi (mPa) - metres

80-100-004 1/4 9.85 1500 9000 2 Piece Coils

80-100-006 3/8 13.71 1500 6000 2 Piece Coils

80-100-008 1/2 16.00 800 6000 2 Piece Coils

80-100-012 3/4 19.30 800 5000 2 Piece Coils

80-100-016 1 26.16 800 3500 2 Piece Coils

Other sizes available on request.

Other sizes available on request.

Corrugated Telfon version available to order on request.

HYDRAULIC –HOSES

317

HYDRAULIC

HOSES

HOSES

FITTIN

GS

PNEUMATIC

SHOSE R

EELS

RUBBER

ACCE

SSORIES &

CO

NSUMABLE

S

Parker 381 Series HoseFor use with petroleum based hydraulic fluids and lubricating oils. Can also be used for air and water.

NB: Air use 250 psi. Cover should be pin pricked.

REINFORCEMENT: Two braids of special high tensile steel wire reinforcement.INNER TUBE: Synthetic rubber.COVER: Black synthetic rubber.BRANDING: White lettering.TEMPERATURE: Oil: -40ºC TO +100ºCWater: -40ºC TO +85ºC

STANDARDS: Exceeds SAE100R2. MSHA accepted.ADVANTAGES:• Highly abrasive resistant cover

Part NumberID Nom.

OD Max. WP Burst Pressure Weight Bend

RadiusSuggested Coupling

Inches mm psi psi kg/m mm -

80-500-381-04 1/4 15.0 5800 23200 0.390 100 43 series

80-500-381-06 3/8 19.0 5000 20000 0.550 130 43 series

80-500-381-08 1/2 22.0 4250 17000 0.670 180 43 series

80-500-381-10 5/8 25.0 3625 14500 0.770 200 43 series

80-500-381-12 3/4 30.0 3125 12500 1.000 240 43 series

80-500-381-16 1 38.0 2500 10000 1.490 300 43 series

80-500-381-20 1¼ 47.0 2250 9000 1.730 420 43 series

80-500-381-24 1½ 54.0 1800 7200 2.140 500 43 series

80-500-381-32 2 68.0 1300 5200 2.960 630 43 series

Parker 301 Series HoseFor use with general medium pressure hydraulic applications. Mediums include petroleum and water-glycol based fluids, lubricating oils. Can also be used for air and water.


REINFORCEMENT: Two braids of special high tensile steel wire reinforcement.INNER TUBE: Nitrile rubber.COVER: Black synthetic rubber.BRANDING: White lettering.TEMPERATURE: Oil: -40ºC TO +100ºCWater: -40ºC TO +85ºC

STANDARDS: Exceeds SAE100R2.ADVANTAGES:• Australian Made

Part NumberID Nom.




80-500-301-04 1/4 15.0 5800 23200 0.390 100 43 series

80-500-301-06 3/8 19.0 5000 20000 0.550 130 43 series

80-500-301-08 1/2 22.3 4250 17000 0.670 180 43 series

80-500-301-10 5/8 25.5 3625 14500 0.770 200 43 series

80-500-301-12 3/4 29.4 3100 12400 1.000 240 43 series

80-500-301-16 1 38.1 2400 9600 1.490 300 43 series

80-500-301-20 1¼ 47.1 1800 7200 1.730 420 43 series

80-500-301-24 1½ 54.5 1300 5200 2.140 500 43 series

80-500-301-32 2 67.2 1150 4600 2.960 630 43 series

HYDRAULIC –HOSES

319

HYDRAULIC

HOSES

HOSES

FITTIN

GS

PNEUMATIC

SHOSE R

EELS

RUBBER

ACCE

SSORIES &

CO

NSUMABLE

S

Parker 421 Series HoseFor use with general medium pressure hydraulic applications. Mediums include petroleum and water-glycol based fluids, lubricating oils. Can also be used for air and water.


REINFORCEMENT: One braid of special high tensile steel wire reinforcement.INNER TUBE: Nitrile rubber.COVER: Black synthetic rubber.BRANDING: White lettering.

TEMPERATURE: Oil: -40ºC TO +100ºCWater: -40ºC TO +85ºCSTANDARDS: Exceeds SAE100R1.

Part NumberID Nom.




80-500-421-04 1/4 13 3250 13000 0.24 100 43 series

80-500-421-06 3/8 17 2600 10400 0.34 130 43 series

80-500-421-08 1/2 21 2325 9300 0.43 180 43 series

80-500-421-10 5/8 24 1875 7500 0.49 200 43 series

80-500-421-12 3/4 28 1525 6100 0.63 240 43 series

80-500-421-16 1 36 1275 5100 0.94 300 43 series

80-500-421-20 1¼ 45 900 3600 1.19 420 43 series

80-500-421-24 1½ 51 725 2900 1.49 500 43 series

80-500-421-32 2 64 575 2300 2.24 630 43 series

These include speciality hoses such as:

• Sewer Jetting (3/8 to 1¼ sizes pressure rated up to 3000 psi and in lengths up to 183 metres, complete with fittings).

Other quality Hydraulic Hoses are available on request at selected Powell Industrial Branches.

Orange: 2500 psi

Blue: 3000 psi

HYDRAULIC –HOSESNOTES

320

HYDRAULIC

HOSES

HOSES

FITTINGS

PNEUMATICS

HOSE R

EELS

RUBBER

ACC

ESSORIES &

CO

NSUMABLE

S

HmP

Powell Industrial Hose Management Program powered by INFOCHIP can include a range of the following features:• Review of your current hose assembly use and needs• Review that the hoses are fit for application• Agree on maintenance program to suit your business• All hoses whether existing under a maintenance program or new, are

tested to Australian Standards following NAHAD guidelines, which can be on-site at your premises with our mobile test facility or off-site at our own maintenance facility

The following is included in our test and record stage:

Through the unique INFOCHIP integrated solution you can:• View hose assembly history & records online 24/7• Receive automated e-mail alerts advising on a hose that's due

for a re-testing inspection• Use RFID Chips and portable readers with Internet upload allowing you

to immediately identify a hoses location, history of repairs, certifications etc• See test certificates instantly for each identified hose online

For more information regarding our Hose Management Program and how it can work for you please speak with your Account Manager or call your local branch and ask for an introduction to HMP. If you wish to learn more about INFOCHIP you can visit the the INFOCHIP website www.infochip.com

HmP – HOsemaNagemeNtPrOgram

• Test number and Visual Tag• Allocation of INFOCHIP

RFID Chip• Date of inspection and/or testing• Retest date tracking if required• Name of person performing

the test

• Description of hose and its condition

• Test Pressure• Working Pressure• Result of test and/or

inspection

HOse assemBlIes Our speciality is the supply of fitted hose assemblies that can be tagged, tested and implanted with an RFID Microchip to track the hose through its life cycle. All of our hose assemblies are built to the relevant NAHAD or Australian Standard, to ensure total compliance to every state legislation.

Testing The Testing Procedure

VISUAL INSPECTIONSThe visual inspection allows us to pick up any mechanical damage, corrosive damage or wear and tear that may have occurred during installation, use or even during storage. Each hose assembly is inspected for kinks, loose covers, bulges or ballooning, soft spots, cuts, broken wires or any obvious defect in the hose. The fittings and attachments are inspected for any type of visual defect that may affect the performance of the assembly also.

PRESSURE AND SUCTION TESTINGHose testing is a procedure conducted at Powell Industrial to ensure that any hose we build for either pressure or suction purposes will perform efficiently and reliably in its intended application. Whilst we provide pressure and suction hoses to a variety of customers, our most predominant recipients of tested hose assemblies include Original Equipment Manufacturer’s (OEM’s) of specialised vehicles.

If required, any hose assembly built at Powell Industrial can be subjected to either pressure or suction testing. All testing is carried out in strict accordance with Australian Standard AS1180 7J & NAHAD Standards.

HmP HOse testINg

stamPed & NaHad

assOcIatIONs & PrOcedures

More benefits to having Powell Industrial as your key partner in the supply of Industrial Hose and Fittings:• Powell Industrial are proud members of NAHAD, the US based key world

Association for Hose and Accessories Distribution• Most of our frontline sales and warehouse staff have sat and passed the

NAHAD exam for Industrial Hose Assembly Specification Guidelines

• We are a member of ADIA – The Australian Drilling Industry Association

• S.T.A.M.P.E.D. – at Powell Industrial we strictly follow the STAMPED procedure to insure as best as we can that we supply the correct hose for your application. In co-operation with our customers, by following STAMPED we endeavour to obtain the maximum information required to provide a quality hose assembly

S SIZE ID, OD and length.

T TEMPERATURE Of the material conveyed & the environment.

A APPLICATION Conditions of use. Delivery, suction or both.

M MATERIAL Contents being conveyed, type & concentration.

P PRESSURE What the assembly will be exposed to.

E ENDS Style, type, orientation, attachment.

D DELIVERY Testing, quality, packaging, delivery timing.

HOse assemBly

request sHeet

STAMP

E

D

s t a m P e d HOse assemBly request

SIZE ID/OD/Length

I.D.(mm)

O.D.(mm)

Length (m)

Overall Length (m) Quantity Comments

Address:

Ph: Order date: Date Required:

Customer contact: Company:

test: Pressure Vacuum Untested Comments:

TEMPERATURE Material conveyed

& environment

Internal ºCSpecify/comment:

External ºC

APPLICATION Conditions of use

SuctionNotes:

DeliveryNotes:

MATERIAL Material being

conveyed

Water Air Abrasive Steam Petrol/Oil Chemical

Details:

PRESSURE Assembly will be

exposed to

kPa PSI Bar Comments

DELIVERY Testing, quality, packaging, time

Collect Courier Transport

Special instructions

ENDSOrientation, style, type, attachment

method

End 1Description:

End 2Description:

HoseDescription:

Fittingmethod

Crimp/Ferrule: Clamps: Qty per end: Bolt: Type: Other details:

Alum SS

Plated Steel

Worm T Bolt

SemiSS FullSS

2 Bolt

4 Bolt

Customer copy: Photocopy this form, complete fields and then scan and e-mail or fax to your nearest Powell Industrial Branch

WARRANTY:Powell Industrial is a ‘distributor‘ and not a manufacturer of products. We offer the ‘Warranty’ provided by the original manufacturer and are bound solely by these requirements.

On items directly imported (therefore the deemed manufacturer), the warranty offered varies depending on the product and the original source of manufacture. Most items are warranted against faults and defects in manufacture for a period of 12 months, however Powell Industrial assumes no responsibility for the following:

• Improper installation or failure to follow fitting nor application instructions• Exceeding manufacturers pressure or material guidelines• Failure due to improper maintenance• Indirect or consequential loss or damage• Cost of freight or travelling time• Product ‘Fit for Use’ is to be solely ascertained by the customer unless specifically requested

in writing to Powell Industrial, and Powell Industrial confirms in writing of specific ‘Fit for Use’ requirements

TRADINg HOURS:Monday to Friday – check with your local branch.

SETTLEMENT TERMS:All trade credit accounts are strictly nett 30 days from the close of the month that items have been invoiced. Non account customers are strictly CBD – (Cash Before Delivery through accepted credit card or EFT deposit in clear funds).

gST:Prices quoted are based on Business to Business trading, and generally are exclusive of GST. GST or any tax applicable will be governed by the laws operating in Australia at the time of sale.

SPECIAL ORDERS:Non stock items sourced and purchased on your behalf are subject to the relevant suppliers trading terms and conditions.

All Special Orders MUST be received in writing and will include a signed Powell Industrial Special Order confirmation form. Unless due to faulty manufactured product, Special Ordered items are NON RETURNABLE or refundable.

Hose or Hose Assemblies cut or made to customers requirements, whether from stocked lines or specially ordered are NON-RETURNABLE

RETURNS FOR CREDITStock items maybe returned for credit providing the following:

• Company is notified within 14 days• Goods returned must be in original condition, free from defects and in Powell Industrial’s view, ‘Fit for Sale’• Copy of invoice to accompany goods for return is provided• Return authority reference will be provided and needs to be attached to goods• Cuts of products, special manufactured assemblies and non-stock buy ins are all non-returnable• Re-stocking fee of 25% plus reimbursements freight costs apply

FAULTY OR DAMAgED gOODSAbove conditions apply, however Powell Industrial reserves the right to reject any claim(s) where the item has been opened, installed or used in any application that is not ‘Fit for Purpose’ or that may void the manufacturer’s warranty.

warraNty

CHARTS &

TABLE

SHOSE R

EELS

PNEUMATIC

SACCE

SSORIES &

CO

NSUMABLE

SHYDRAULIC

SFITTIN

GS

RUBBER

CATALOGUE DISCLAIMERS

POWELL INDUSTRIAL makes every effort to provide accurate information within its catalogues. However, it will not be held responsible for errors (pictorial or written) and omissions arising from oversights, printing errors, errors in source material and changes in manufacturers' specifications.

Information provided relating to product specifications is believed correct at the time of compilation of the catalogue. Manufacturers' specifications can change from time to time and are not always communicated by them. Nor is itpossible for POWELL INDUSTRIAL to retrospectively advise its customers of these changes. In addition; POWELL INDUSTRIAL reserves the right to substitute similar brands or products for the listed products application due tothe non-availability of the listed product or brand; or other reason(s) as it sees fit. If you have a concern about a substituted product please discuss with our Customer Service staff or your POWELL INDUSTRIAL representative.

Where it is known that the correct specification of hose &/or fittings &/or assembly method is critical either from a performance or safety perspective, POWELL INDUSTRIAL recommends that such requirements are confirmed as being met by the product &/or assembly specifications before putting said products &/or assemblies into service.

Imagery: Actual products supplied may vary in appearance to those pictured as reference in this catalogue. All images should be used as a guide only.

Please note all products found in this catalogue may not be readily available at every Powell Branch location.

NB: Fuel Compatibility. Modern fuel additives and blends e.g. Ethanol; can render traditionally used hoses unsuitable for fuel transfer. Many compatibility charts and manufacturers catalogues are yet to catch up with these changes; e.g. PVC hoses that have traditionally been made with a Fuel Resistant PVC blend; in the main are not compatible with Ethanol in fuel. If you intend using a hose for the transfer of Ethanol fuel, Bio Fuel or other 'non-standard' fuel or additive, you should advise POWELL INDUSTRIAL of this and seek confirmation that the product to be supplied is compatible.

The GOODYEAR (and Winged Foot Design) trademark is used by Veyance Technologies, Inc. under license from The Goodyear Tire & Rubber Company. Goodyear Engineered Products are manufactured and sourced exclusively by Veyance Technologies, Inc. or its affiliates. The following trademarks are licensed to Veyance Technologies, Inc. by The Goodyear Tire & Rubber Company, including Goodyear, Spiraflex, Horizon, Verigard, Ortac, Wingfoot, Flexten, Carbryn, Gorilla, Chemivac, Extremeflex, Plicord, Fortress, Flexsteel, Chemigum, Chem One, Wingprene, Pyraflex, Hysunite, Turfsyn, Artrac, Alphasyn, Chemrin, Omegasyn, Vintner, Flexwing, Pliovic and Insta-Lock. ©2008 Veyance Technologies, Inc. All Rights Reserved. Gates, Mustang, Terminator, Premo Flex, Food & Beverage Master, Cellar Master, Food Master, Green Stripe, Stallion and Redback are registered trademarks and Adapta Flex, Sanitron, Gatron and Power Clean are trademark and Gatron is a registered trademark of. The Gates Rubber Company. Viton is a registered trademark of DuPont Dow Elastomers L.L.C. Teflon is a registed trademark of E.I. du Pont de Nemours and Company. Microban is a registered trademark of Microban International, Ltd. Kanaflex and Kanaline are registered trademarks of the Kanaflex Corporation Co., Ltd. IPL and Vulcano are registered Trademarks of Industrie Plastiche Lombarde S.p.A. Santoprene is a registered trademark of Advanced. Elastomer System. Parker Hannifain is a registered trademark of. Parker Intangibles LLC. Preston and Optima are registered trademarks of Powell Industrial Pty Ltd. Oroflex is a trademark of BELEGGINGSMAATSCHAPPIJ NOVENTU B.V. Philmac is a registered trademark of Philmac Pty Ltd. BAND-IT, Ultra-Lok and BAND-IT JR are a registered trademarks of BAND-IT- IDEX, Inc. Neta is a registered trademark of. Neta Industries Pty Ltd. Norma, Normaflex, Torro, Normafix, Cobra, Normaconnect and Bandimex Banding are registered trademarks of. Norma Germany GMBH. Stepless is a registered trademark of. HANS OETIKER AG MASCHINEN- UND APPARATEFABRIK. Sunnyhose is a registered trademark of. Takata Corporation. Goodall, Century and Long Life are registered trademarks of. Lewis-Goetz and Company, Inc.

DISCLAIMER

Mackayphone 07 4952 1666fax 07 4952 1133Unit 2, 3 Ginger StreetMackay Qld [email protected]

Coopers Plainsphone 07 3722 3722fax 07 3722 37331/76 Postle StreetCoopers Plains Qld [email protected]

Geebungphone 07 3722 3722fax 07 3722 3733238 Robinson Road Geebung Qld [email protected]

Townsvillephone 07 4775 4855fax 07 4775 476677 Pilkington StreetGarbutt Qld [email protected]

Newcastlephone 02 4028 6810fax 02 4028 6835Unit 6, 26 Balook DriveBeresfield NSW [email protected]

Wetherill Parkphone 02 9756 1244fax 02 9756 1534Unit 2, 1269 The Horsley Drive,Wetherill Park NSW [email protected]

Derrimutphone 03 8353 2835fax 03 8353 2879Unit 1, 2 Derrimut DriveDerrimut Vic [email protected]

Hobartphone 03 6272 1055fax 03 6272 14858A Lampton Avenue,Derwent Park Tas [email protected]

Braesidephone 03 9588 1440Fax: 03 9588 1441Factory 1, 252 Governor RoadBraeside Vic [email protected]

Kilsythphone 03 9588 1440fax 03 9588 1441Unit 3, 120 Canterbury RoadKilsyth South Vic [email protected]

Burniephone 03 6431 4068fax 03 6431 67276–8 Wellington Street,South Burnie Tas [email protected]

Welshpoolphone 08 9358 5900fax 08 9358 5911Unit 6, 16 Kewdale Road,Welshpool WA [email protected]

Powell Industrial Branches

Imagery used in this catalogue is as a guide only and may not depict the actual product stocked. All product specifications are subject to supplier changes. POWELL INDUSTRIAL PTY LTD ACN 010 035 346 1/76 Postle Street, Coopers Plains, Qld 4108 POW007

powell industrial catalogue – hydraulic hoses · hydraulics – hoses hydraulic hoses 1 & 2...

Documents