PortfolioControllers for pellet/biomass boilers

Plum Sp. z o.o. ul.Wspólna 19, Ignatki, 16-001 Kleosin, Poland tel. +48 85 749-70-00 www.plum.pl plum@plum.pl

FOR PELLET/BIOMASS BOILERS

GraphicDisplayProducts

ecoMAX 800PDOUBLE-MODULE CONTROLLER FOR AUTO-MATIC PELLET BOILERSThis controller has seven current outputs (230V) for peripheral devices, six analog inputs for connecting sensors, one input for NO/NC thermostats and one low voltage output (6V). The ecoMAX 800P can work together with additional devices such as: extension modules B and C, lambda probe, ecoNET 300 internet module or ecoSTER 200 / ecoSTER TOUCH room thermostat. The controller’s basic version consist of two pieces – control panel and electronic module which is designated to mount on DIN-Rail. The whole device has to be built into boiler housing.

II

IV

II IV IVIIIIIIIIIIII

II

ecoMAX 910 RCONTROLLER FOR BOILERSThe ecoMAX 910 is a single module controller with tilting display designed for boilers equipped with auger. This con-troller has ten 230V current outputs for connecting periph-erals, eight analog inputs for temperature sensors, two room thermostats inputs as well one 12V current output for con-trol over reserve boiler, circulating pump, alarm signaling or circulation pump. The controller is equipped with STB safety temperature limiter and detects signals from door opening sensor for both storage tank and boiler doors.

NEW

III I II

ecoMAX 920 PCONTROLLER FOR BOILERSThe ecoMAX 920 is a single module controller with tilting dis-play designed for boilers equipped with igniter and sprout or retort feeders. This controller has twelve 230V current out-puts for connecting peripherals, ten analog inputs for tem-perature sensors, one room thermostat input and also one 12V current output for control over reserve boiler and alarm signaling as well one rotation sensor input. The controller is equipped with STB safety temperature limiter and detects signals from door opening sensor for both storage tank and boiler doors.

NEW

x2 x2

ecoMAX 860PDOUBLE-MODULE CONTROLLER FOR AUTOMATIC PELLET BOILERSThis controller has twelve current outputs (230V) for periph-eral devices, ten analog inputs for connecting sensors, two inputs for NO/NC thermostats, one low voltage output (12V) and one analog output 0…10 V. The ecoMAX 860P can work together with additional devices such as: extension mod-ules B and C, lambda probe, ecoNET 300 internet module or ecoSTER 200/ecoSTER TOUCH room thermostat. The con-troller’s basic version consist of two pieces – control panel and electronic module which is designated to mount on DIN-Rail. The whole device has to be built into boiler housing.

II

II II

III IIIIII

ecoMAX 850PCONTROLLER FOR AUTOMATIC PELLET BOILERSThis controller has ten current outputs (230V) for peripheral devices, eight analog inputs for connecting sensors, two inputs for NO/NC thermostats and one low voltage output (12V). The ecoMAX 850P can work together with additional devices such as: extension modules B and C, lambda probe, ecoNET 300 internet module or ecoSTER 200/ecoSTER TOUCHroom thermostat. The whole device has its own dedicated housing.

III

IIII

VV VIVIV IVIII

IIIII

*

* in development

*

* in development

*

* in development

ecoMAX 350P/RSIMPLE YET VERSATILE CONTROLLER FOR BOILERSThis controller has six current outputs (230V) for peripheral devices and six analog inputs for connecting sensors. The ecoMAX 350P can work together with additional devices such as: extension modules B and C, lambda probe, ecoNET 300 internet module or ecoSTER 200/ecoSTER TOUCH room thermostat.

ecoMAXX 800RDOUBLE-MODULE CONTROLLER FOR PELLET BOILERSThis controller has seven current outputs (230V) for periph-eral devices, six analog inputs for connecting sensors, one in-put for NO/NC thermostats and one low voltage output (6V). The ecoMAX 800P can work together with additional devices such as: extension modules B and C, lambda probe, ecoNET 300 internet module or ecoSTER 200/ecoSTER TOUCH room thermostat. The controller’s basic version consist of two piec-es – control panel and electronic module which is designated to mount on DIN-Rail. The whole device has to be built into boiler housing.

II IIIIIIIIIII IVIVIVII

VV

V

IIII

I

II II

FOR PELLET/BIOMASS BOILERS

Features table

Products

Accessories

ecoNET Modules B and C lambda probe ecoTOUCH ecoDRIVE ecoSTER TOUCH ecoSTER 200

CON

TROL

LERS

ecoMAX 910 R X X X X X

ecoMAX 920 P X X X X X X

ecoMAX 860 P X X X X X X

ecoMAX 850 P X X X X X X

ecoMAX 800 P X X X X X X

ecoMAX 800 R3 X X X

ecoMAX 350 P X X

ecoMAX 910 R TOUCH X X X X X X

ecoMAX 920 P TOUCH X X X X X X X

ecoMAX 860 P TOUCH X X X X X X X

ecoMAX 850 P TOUCH X X X X X X X

ecoMAX 800 P TOUCH X X X X X X X

Additional option Available with extensionmodule B

Available with extensionmodule C/MX.03

*

* in development

FOR PELLET/BIOMASS BOILERS

TouchDisplay Products

ecoMAX 920 P TOUCHCONTROLLER FOR BOILERSThe ecoMAX 920 is a single module controller with tilt-ing display designed for boilers equipped with igniter and sprout or retort feeders. This controller has twelve 230V current outputs for connecting peripherals, ten analog inputs for temperature sensors, one room thermostat input and also one 12V current output for control over reserve boiler and alarm signaling as well one rotation sensor input. The controller is equipped with STB safety temperature limiter and detects signals from door open-ing sensor for both storage tank and boiler doors.

ecoMAX 910 R TOUCHCONTROLLER FOR AUTOMATIC BOILERS The ecoMAX 910 is a single module controller with tilt-ing display designed for boilers equipped with auger. This controller has ten 230V current outputs for connecting peripherals, eight analog inputs for temperature sensors, two room thermostats inputs as well one 12V current output for control over reserve boiler, circulating pump, alarm signaling or circulation pump. The controller is equipped with STB safety temperature limiter and de-tects signals from door opening sensor for both storage tank and boiler doors.

ecoMAX 860P TOUCHDOUBLE-MODULE CONTROLLER FOR AUTOMATIC PELLET BOILERS This controller has twelve current outputs (230V) for pe-ripheral devices, ten analog inputs for connecting sen-sors, two inputs for NO/NC thermostats, one low voltage output (12V) and one analog output 0…10 V. The ecoMAX 860P TOUCH can work together with additional devi-ces such as: extension modules B and C, lambda probe, ecoNET 300 internet module or ecoSTER TOUCH room thermostat. The controller’s basic version consist of two pieces – control panel and electronic module which is de-signated to mount on DIN-Rail. The whole device has to be built into boiler housing.

This controller has nine current outputs (230V) for peripheral devices, eight analog inputs for connecting sensors, two inputs for NO/NC thermostats and one low voltage output (12V). The ecoMAX 850P TOUCH can work together with additional devices such as: extension modules B and C, lambda probe, ecoNET 300 internet module or ecoSTER TOUCH room thermostat. The whole device has its own dedicated housing.

ecoMAX 850P/R TOUCHDOUBLE-MODULE CONTROLLER FOR AUTOMATIC BOILERS

This controller has seven current outputs (230V) for peripheral devices, six analog inputs for connecting sensors, one input for NO/NC thermostats and one low voltage output (12V). The ecoMAX 800P TOUCH can work together with additional devices such as: exten-sion modules B and C, lambda probe, ecoNET 300 inter-net module or ecoSTER TOUCH room thermostat. The controller’s basic version consist of two pieces – con-trol panel and electronic module which is designated to mount on DIN-Rail. The whole device has to be built into boiler housing.

ecoMAX 800P/R TOUCHDOUBLE-MODULE CONTROLLERFOR AUTOMATIC PELLET BOILERS

II

III II II

IIIIII III IVIV IV

Additional option Available with extensionmodule B

Available with extensionmodule C/MX.03

NEW

NEW

III I II

x2 x2

IIII II III

IIIIII

IIII

VV VIVIV IVIII

IIIIIIII

*

* in development

5’’

*

* in development

5’’

*

* in development

5’’

Accessories ecoNETINTERNET MODULEThis extension module enables con-trol of boiler operation over PC and In-ternet. The user is thus able to adjust such parameters as temperature or pumps and mixers operation and also view controller’s status. From the user point of view, clear and straight-forward graphic visualization of oper-ational history can vantage.

ecoLAMBDA

This modern extension module for pellet boiler controllers is designed formeasuring and regulation of oxygen content in exhaust gases. It is equip-ped with next generation communi-cation interface for sending measure-ment results back to the controller. As a result the whole burning process is being effectively optimized.

ecoLINKCONNECTIVITY MODULE

The ecoLINK module ensures fast and reliable software update of a controller through PC on site, where such con-troller was installed. Both electronic modules and controller itself, as well ecoSTER remote control panel have their own software which can be up-dated using ecoLINK module.

Extensionmodule BThis device has seven current outputs (230V) as well seven inputs for additional sensors. Depending on software, these outputs may serve for buffer or additional mixing circuits operation. Controller’s relevant operation manual contain more detailed information.

Extensionmodule CModern electronic device allowing the control over two more mixing circuits.

SensorsTEMPERATURE SENSORS

- CT4 basic sensor- CT4P weather sensor- CT2 S fume sensor- OCP2 optical sensor- CT6-P sensor

ecoSTER 200REMOTE CONTROL PANEL

ecoSTER TOUCHREMOTE CONTROL PANEL WITH BUILT-IN ROOM THERMOSTAT

V

V VIVIV IV

PT1000

oT

III

III IIIIIII II

+

This device is designated to use with ecoMAX series controllers. Thus the user can oversee boiler operation and adjust some parameters from different place (for example from his living room). The ecoSTER 200 is also equipped with room thermostat with a function of setting the temperature schedule. Visual and audible warnings enhances user’s safety. It is also possi-ble to connect two more temperature sensors for greater functionality.

*

* in development

5’’

Circulating pump

Intelligent alarm Anti-freezing Buffer Circulation Fire sensor

Weather sensor

Fumessensor Cleaning Disinfection

ecoLAMBDA ecoLINK ecoNET

ecoSTER 200 Economical mode Fuzzy logic Schedules Information

Intelligent menu internet Languages Comfort

modeComplete

casing

Summer/Winter Mixing valve Fan power

modulationModern design

Rotating menu

ASH Cleaning

Pump

3 years memory of operational

states

Party mode Feeder

Pelletfeeder II

Combustion process

optimisation

CH Pump

Circulation pump

Fuellevel

Automatic operation

Easy to use PT1000

Differenttemperatures

different roomsLAMBDA

probe

Weathercontrol sensor

Nighttemperature

Thermostat

touch & play

Operational mode

Vacation mode

Ventilating mode

Work with theboiler Exit mode

No fuel detection

Boiler switch

IgniterClock

BUS PC connection Back flow

protection

Pelletfeeder

Pelletfeeder I

Mixing valve pump

BUSextending

Daytemperature

STB Input

Fan

Software updates

LCD - display

Adjusted to regulator

HWU Pump

PT1000

oT

Additional feeder+

Additional thermal

protection

Firing-up

This device fulfill the role of an integra-ted remote control over entire heating installation. It gives the user the ability to oversee and adjust temperature as well other parameters of such devices as boilers, heat pumps and other com-ponents of heating installation.

November 2019

PLUM Sp. z o.o. ul.Wspólna 19, Ignatki, 16-001 Kleosin, Poland tel. +48 85 749-70-00 www.plum.pl plum@plum.pl

BDO number: 000009381