pneumatic feed pumps paint feed made to measure! feed pumps paint feed made to measure! ... thanks...
TRANSCRIPT
Pneumatic feed pumps
Paint feed made to measure!
Innovative and
only from WAGNER:
Extremely reliable
Long service life
Highly economical
B
G
L
K
H
I
M
D
E
F
AC
Pneumatic feed pumps
Powerful performance!
JAGUAR, LEOPARD, PUMA...
Throughout industry, WAGNER feed pumps ensure
an optimal, reliable paint supply. They convert
energy into perfect performance and provide a
constant, pulsation-free flow of material – even
over great distances between paint room and point
of application.
The benefits!
Particularly high delivery rates thanks to the
large fluid section and powerful pneumatic motors.
Extremely kind to the paint material – the
pumps only run when material is being taken from
the piping network.
The innovation!
With the pneumatic piston pumps the IceBreaker
air motors provide decisive advantages for
practical use especially in continuous multi-shift
operation.
The design refinements have reduced the
inevitable power losses due to icing down to a
minimum. Interruptions of work due to the earlier
need for thawing out are now a thing of the past!
Easily maintained fluid sections reduce the
down times due to maintenance and cleaning to a
minimum. Stainless steel quality ensures low wear
and long service life.
Filter (option)
Pneumatic motor
Fluid section
■ The new WAGNER IceBreaker air motor
– Minimal icing, thanks to new internal geometry (A)
– The pneumatic control valve doesn't need any lubricating oil
– Absolutely minimum pulsation to ensure a uniform paint feed
– Solidly built control housing (B) with integral silencer (C)
– Safety valve prevents over-pressurisation
■ Compact integral pressure regulator unit
– Shut-off / air bleed valve (D), pressure regulator (E), pressure gauge (F)
Constant power thanks to low-icing
IceBreaker air motors!
Depending on the size of the plant and the area of application, WAGNER pneumatic feed pumps come in a variety of types and performance classes.
The high delivery rate (volumetricflow per double stroke) runs from 130to 1200 cc, the working pressure(maximum operating gauge pressure)from 24 to 64 bar.
When choosing the right pumps manyfactors have to be considered.
– Total delivery rate– Number of application points – Hose length and delivery head – Type of materials being applied
play a very decisive role.
On the following pages you will find all the feed pumps with their mostimportant performance data.
You can get further information from the Product Information sheets or haveyour WAGNER specialist advises you personally and individually.
High economy thanks to
fast maintenance!
In all classes, in a class of
its own!
■ 50 % faster maintenance = greater economy!
■ Easily maintained fluid section!
– Can be serviced without dismantling the pump
– Easily cleaned separating fluid chamber (G)
– Packing changed quickly without special tools
– Compact build due to follower packings (H)
– Easily replaced: Large inlet (I) and outlet (K) valves for optimum material flow
■ Stainless steel quality!
– All pump parts in contact with paint are made of stainless steel
– Tungsten carbide valve seats
– Hard chromed pump piston (L)
– Self adjusting packings (M)
■ 15 % fewer components = less wear!
■ 3 year long term warranty! *
Further convincing proof of the reliability and quality of the WAGNER piston pumps
* excluding wear parts
Be
sch
nit
t g
ek
ürzte
Se
ite
n,
Se
ite
nb
reit
e 1
95
mm
LEOPARD 4-1200LEOPARD 4-1200Feed pump for large paint circulation systems, medium distances, low to mediumviscosities, high material throughput
Areas of application
Automotive industry and suppliers, commercial vehicle building, plastics andchemical industry
low to medium viscosity materials
e.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, emulsions,release agents, adhesives
LEOPARD 8-600LEOPARD 8-600Feed pump for small and large paint circula-tion systems, mixing and dosing systems,medium material throughput
Areas of application
Automotive industry and suppliers, woodand furniture industry, agricultural machineryand commercial vehicle building, machinemakers and plastics industry, chemical andprinting industry
high viscosity materials
e.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, emulsions,release agents
JAGUAR 9-1200JAGUAR 9-1200Feed pump for large paint circulation systems,long distances and high delivery heads, highviscosities and material throughput
Areas of application
Automotive industry and suppliers, commercial vehicle building, plastics industry,chemical and printing industry
high viscosity materials
e.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, emulsions,release agents
Technical data
Intensification ratio 9:1
Volumetric flow 1200 cc per double stroke 40.58 oz
Volume for 60 ltr/min50 double strokes 15.85 gpm
Volume 110 ltr/minmax. free outlet 29.06 gpm
Max. working pressure 64 bar928 psi
Air inlet pressure 7.1 bar103 psi
Air consumption per double 80 nlstroke at 6 bar / 87 psi 2.81 cfm
Sound pressure level 83 dB(A) at max. permissible air pressure
Technical data
Intensification ratio 4:1
Volumetric 1200 ccflow per double stroke 40.58 oz
Volume for 60 ltr/min50 double strokes 15.85 gpm
Volume 110 ltr/minmax. free outlet 29.06 gpm
Max. working pressure 30 bar435 psi
Air inlet pressure 7.7 bar112 psi
Air consumption per double 37.3 nlstroke at 6 bar / 87 psi 1.32 cfm
Sound pressure level 78 dB(A) at max. permissible air pressure
Technical data
Intensification ratio 8:1
Volumetric 600 ccflow per double stroke 20.29 oz
Volume for 30 ltr/min50 double strokes 7.9 gpm
Volume 75 ltr/minmax. free outlet 19.8 gpm
Max. working pressure 62 bar899 psi
Air inlet pressure 7.7 bar112 psi
Air consumption per double 37.3 nlstroke at 6 bar / 87 psi 1.32 cfm
Sound pressure level 78 dB(A)at max. permissible air pressure
PUMA 8-300PUMA 8-300Feed pump for small paint circulation systems, automatic application systems, mixing and dosing systems, low materialthroughput
Areas of application
Automotive industry and suppliers, woodand furniture industry, agricultural machineryand commercial vehicle building, machinemakers and plastics industry, chemical andprinting industry, general industry
high viscosity materials
e.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, releaseagents
3-130 S3-130 SFeed pump for small paint circulation systems, automatic application systems, mixing and dosing systems, low materialthroughput
Areas of application
Automotive industry and suppliers, woodand furniture industry, agricultural machineryand commercial vehicle building, machinemakers and plastics and chemical industry,general industry
low to medium viscosity materials
e.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, releaseagents, adhesives
PUMA 3-600PUMA 3-600Feed pump for small and large paint circulation systems, mixing and dosing systems, medium material throughput
Areas of application
Automotive industry and suppliers, woodand furniture industry, agricultural machineryand commercial vehicle building, machinemakers and plastics industry, chemical andprinting industry
low to medium viscosity materials
e.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, emulsions,release agents, adhesives
Technical data
Intensification ratio 3:1
Volumetric 600 ccflow per double stroke 20.29 oz
Volume for 30 ltr/min50 double strokes 7.9 gpm
Volume 75 ltr/minmax. free outlet 19.8 gpm
Max. working pressure 24 bar348 psi
Air inlet pressure 8 bar116 psi
Air consumption per double 16.5 nlstroke at 6 bar / 87 psi 0.58 cfm
Sound pressure level 78 dB(A)at max. permissible air pressure
Technical data
Intensification ratio 8:1
Volumetric 300 ccflow per double stroke 10.15 oz
Volume for 15 ltr/min50 double strokes 3.96 gpm
Volume 50 ltr/minmax. free outlet 13.2 gpm
Max. working pressure 64 bar928 psi
Air inlet pressure 8 bar116 psi
Air consumption per double 16.5 nlstroke at 6 bar / 87 psi 0.58 cfm
Sound pressure level 78 dB(A)at max. permissible air pressure
Technical data
Intensification ratio 3:1
Volumetric 130 ccflow per double stroke 4.4 oz
Volume for 6.5 ltr/min50 double strokes 1.72 gpm
Volume 30 ltr/minmax. free outlet 7.9 gpm
Max. working pressure 24 bar348 psi
Air inlet pressure 8 bar116 psi
Air consumption per double 3 nlstroke at 6 bar / 87 psi 0.11 cfm
Sound pressure level 78 dB(A)at max. permissible air pressure
www.wagner-group.com
Feed pumps, accessories and more!
Feed pump accessories
Whether it's a simple wall mount or a drum siphonwith agitator, WAGNER offers an extensive range ofaccessories for stationary applications of feedpumps in paint feed systems.
Paint supply systems
We design and build complete paint feed systems,right up to pipeline systems matched to your requirements.
Mixing and dosing systems
■ Intellimix 4 for automatic applications with air atomisingguns or high-speed rotary atomisers, customizedsolutions and complex system solutions withcentral control
■ Intellimix 3 for universal use for automatic and manual applications in all application variants
■ FlexControl plus for versatile use in automatic and manual applications, almost unlimited possibilities in theincorporation of peripheral equipment, simpleoperation
■ FlexControl for manual applications in all application variants. The best alternative to mechanical 2Ksystems with the simplest operation
With these mixing and dosing units WAGNER offersa powerful family of products which ideally suit thewidest range of industrial applications.
Intellimix 3 2K FlexControl
Pri
nte
d i
n G
erm
an
y ·
Su
bje
ct t
o a
lte
rati
on
s ·
GB
· 9
124
02
1 ·
11
/20
05
· T
W
PTB 03 ATEX Q019
Drum siphon withagitator and intakesystem
Wall mount Base stand