platform: xk09 firmware: dlgm5x - microsoft · pdf file · 2015-09-28downloadable...

Installation Guide

Downloadable Firmware for Platform XK09: DLPKGM, DLGM5X, CHRYSLER, PLXR, PKN3, DLVW1, DLHO4, DLHO5, DLHY, DLKIA1, DLKIA2, DLCH2, DLCH3, DLCH4.

Upgradable Door Lock & Alarm Interface

† Buick, Chevrolet, Pontiac and Saturn are registered trademarks and property of their respective companies.

DL

doorlockINTERFACE

Platform: XK09Firmware: DLGM5X

Upgradable door lock and alarm interface which includes the functions lock/unlock, driver door unlock, trunk/hatch release, OEM security arm/disarm, door trigger output (-), trunk trigger output (-), as well as driver and passenger side sliding door control. This firmware is compatible with Buick, Chevrolet, Pontiac and Saturn vehicles.

Vehicle Compatibility Chart

Installation Type A.

.........................................................................................................................................

Installation Procedure Overview.................................................................................................................................

........................................................................................................................................................................Type B.........................................................................................................................................................................Type C.........................................................................................................................................................................

Vehicle Wiring Reference Chart..................................................................................................................................

Module Programming..................................................................................................................................................User Configuration - Optional Programming...............................................................................................................

Feature and Option List..............................................................................................................................................Remote Start Procedure (with an XL202 in Installation C).........................................................................................

02

03

040506

07

0808

0909

Warranty...................................................................................................................................................................... 10

Index

Update AlertFirmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.

Rev.: 20100105


© 2009 Directed Electronics. All rights reserved.

Vehicle Compatibility Chart

TECHNICAL SUPPORT / INFORMATION

web resources:www.xpresskit.com

www.xpressvip.com

www.directechs.com

Vehicle Application Guide

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

Buick

Allure X X X X X

LaCROSSE X X

Terraza X X X

Chevrolet 09 08 07 06 05 04 03 02 01 00

Cavalier* X X X X X

Cobalt X X

HHR X

Impala X X

Malibu X X X

Malibu MAXX X X X

Monte Carlo X X

Uplander X X X X

Venture X X X X X X

Oldsmobile 09 08 07 06 05 04 03 02 01 00

Silhouette X X X X X

Pontiac 09 08 07 06 05 04 03 02 01 00

G6 X X

Grand Prix X X X X X

Montana X X X X X X

Montana SV6 X X X

Pursuit X X

Transport X X X X X

Solstice X

Sunfire* X X X X X

Saturn 09 08 07 06 05 04 03 02 01 00

Relay X X X

* These vehicles are not equipped with Keyless Data.

To see a list of available features for each vehicle, visit www.xpresskit.com.

Rev.: 20100105



Please Note: Failure to proceed in the following order could result in possible vehicle damage.

If your remote start system has D2D Jumpers, make sure both Jumpers are in the horizontal position.

Installation Procedure Overview

4

3

2

See details on page 8.

Module programming

Power up the XK09

Once done, the interface red LED will turn ON.

If connected in W2W

Connect the 20-pin harness.

If connected in D2D

Connect the 4-pin D2D harness first, then connect the 20-pin harness.

Caution! The 20-pin connector can be easily plugged in backwards.

1

Make the necessary connections in the vehicle, as instructed in the vehicle-specific guides.

Connect the remote starter to the vehicle

Make all the connections as per the provided wiring schematics, either in W2W or D2D.

Wiring

Rev.: 20100105



Pro

gra

mm

ing

bu

tto

n

XK09 Front Side

XK09 Back Side

D2D connectorP#: XKD2D65wire side view

1 8

169

10

01

20

11

20 PIN connectorwire side view

Light Green (-) Lock*

(-) Ground When Running (status)*Blue/White

Blue

Red/White (-) Trunk*

(-) Unlock*

(+) 12 Volt*

Green

(-) Ground*Black

(+) 12 VoltRX(-) GroundTX

RedJ1850 BUS

+12VDC

Diagnostic connector (Face view) Under dash driver side Position 2

XKLOADER2

Option A - Firmware Upgrades

InternetUSB CABLE

USB PORT

* These wires are not required if connected in D2D mode.

Connect the Door Trigger Output wire to the door pin in the vehicle if required.


01

04

Option B - Data to Data Connection to RCS Data Port

Green

Blue/RedGray

(-) Door Detection Output*

(-) Door Trigger Output (Rap & Rearm Wire)(-)Trunk Detection Output*

Installation AWhen DLGM5X is installed with a remote starter in a vehicle NOT EQUIPPED WITH Keyless Data.

R

em

ote

Sta

rter

Keyless Data lines Black/White and Yellow/Black must be connected together at all times, even if not connected to the vehicle. The LED can turn ON solid if these wires are not connected together.

Black/White

Yellow/Black

Keyless Data

Rev.: 20100105



Pro

gra

mm

ing

bu

tto

n

XK09 Front Side

XK09 Back Side

D2D connectorP#: XKD2D65wire side view

1 8

169

10

01

20

11


Light Green (-) Lock*

(-) Ground When Running (status)*Blue/White

Blue

Red/White (-) Trunk*

(-) Unlock*

(+) 12 Volt*

Green

(-) Ground*Black

(+) 12 VoltRX(-) GroundTX

RedJ1850 BUS

+12VDC


XKLOADER2

Option A - Firmware Upgrades

InternetUSB CABLE

USB PORT


Refer to the Vehicle Wiring Reference Chart on page 7 to see where to connect the Door Trigger Output wire.


01

04

Option B - Data to Data Connection to RCS Data Port

Green

Blue/RedGray

(-) Door Detection Output*

(-) Door Trigger Output (Rap & Rearm Wire)(-)Trunk Detection Output*

Installation BWhen DLGM5X is installed with a remote starter in a vehicle EQUIPPED WITH Keyless Data.

BCMRefer to the Vehicle Wiring Reference Chart on page 7 to see where the connector and pin are located on your vehicle.

§Keyless Data lines Black/White and Yellow/Black must be connected together at all times, even if not connected to the vehicle. The LED can turn ON solid if these wires are not connected together.

§Refer to the the Vehicle Compatibility Chart on page 2 to determine which vehicles possess Keyless Data.

Black/White

Yellow/Black

Keyless Data

Violet/Black (-) Passenger Sliding Door*

White/Violet (-) Driver Sliding Door*

Rem

ote

Sta

rter

Rev.: 20100105



XK09 Back Side

10

01

20

11


XKLOADER2

Option A - Firmware UpgradesUse with D2D harness XKD2D65.

InternetUSB CABLE

USB PORT

Option B - Data to Data Connection to RCS Data PortUse with D2D harness HARD2D Rev. 3.

XL202**

XL202Antenna

1 8

169

Green

J1850 BUS


BCM


Black/White

Keyless Data

(+) 12 Volt*

(-) Ground*Black

Red

+12VDC

D2D connectorwire side view

(+) 12 VoltRX

(-) GroundTX

Installation CWhen DLGM5X is installed in a vehicle equipped with a GM factory remote starter with range extender module (XL202).

Yellow/Black

Refer to the Vehicle Wiring Reference Chart on page 7 to see where to connect the Parking Lights Input & Door Trigger Output wires.

Refer to the Vehicle Wiring Reference Chart on page 7 to see where the connector and pin are located on your vehicle.

Violet/Black (-) Parking Lights Ouput

§Keyless Data lines Black/White and Yellow/Black must be connected together at all times, even if not connected to the vehicle. T f these wires are not connected together.

§Refer to the the Vehicle Compatibility Chart on page 2 to determine which vehicles possess Keyless Data.

he LED can turn ON solid i

Pro

gra

mm

ing

bu

tto

n

XK09 Front Side


01

04Blue/Red

(-) Door Trigger Output (Rap & Rearm Wire)

** Sold separately.

Rev.: 20100105



Vehicle Years BCM LocationRap & Rearm Wire

(Blue/Red from module)

Keyless Data Output Wires (Black/White & Yellow/Black

from module)

Parking Light Wire (Violet/Black from module)

Allure 2005-09Left side of

steering column

Tan wire at BCM:

C2 connector, pin 25

Black/White wire at BCM:


White wire at BCM:


LaCROSSE 2005-06Left side of

steering column

Tan wire at BCM:




White wire at BCM:


Terraza 2005-07Left side of

steering column

Tan wire at BCM:


Tan/White wire at BCM:


Brown/White wire at BCM:


Cobalt 2005-06 Center consoleGray/Black wire at BCM:

J1 connector, pin 22




C2 connector, pin 5

HHR 2006 Center consoleGray/Black wire at BCM:





C2 connector, pin 5

Impala 2004-05Left side of

steering column

Light green wire at BCM:



C1 connector, pin A11

Light blue wire at BCM:


Malibu 2004-06 Center consoleGray/Black wire at BCM:





C2 connector, pin 5

Malibu MAXX 2004-06 Center consoleGray/Black wire at BCM:





C2 connector, pin 5

Monte Carlo 2004-05Left side of

steering column





Light Blue wire at BCM:


Uplander 2005-08Left side of

steering column

Tan wire at BCM:






G6 2005-06 Center consoleGray/Black wire at BCM:





C2 connector, pin 5

Grand Prix2004-06,

2008

Left side of

steering column

Tan wire at BCM:




White wire at BCM:


Montana SV6 2005-07Left side of

steering column

Tan wire at BCM:






Pursuit 2005-06 Center consoleGray/Black wire at BCM:





C2 connector, pin 5

Solstice 2006Right side of

center console






C2 connector, pin 5

Relay 2005-07Left side of

steering column

Tan wire at BCM:






Buick

Chevrolet

Pontiac

Saturn

Vehicle Wiring Reference Chart

Rev.: 20100105



Turns ON

Turns ON Turns OFF

&

1

1

Insert the key into the ignition at the OFF position and hold the Programming button down for at least 2 seconds. The LED flashes rapidly for 2 seconds to confirm you are in programming mode.

&Flash 2 Secs

&IG

N

START

OF

F

KEY

Press & HoldKey at OFF

6 Remove the key from the ignition barrel.IG

N

START

OF

F

KEY

Remove Key

5 To exit the programming mode, hold the Programming button down until the LED flashes once quickly.

Flashes Once

&Press & Hold

3To change the MODE, press once on the Programming button. The LED confirms the MODE with a number of slow flashes.

Only modes 8 and 9 are available.&

Press OnceNo. of Slow

Flashes = Mode

2

2

Release the Programming button. The LED first flashes a number of times slowly to indicate the MODE. It then flashes a number of times quickly to indicate the OPTION.

&No. of Slow

Flashes = ModeNo. of Quick

Flashes = Option

&Release

4To change the OPTION in the selected MODE, press LOCK or UNLOCK on the alarm or remote starter transmitter. The LED confirms the OPTION with a number of quick flashes.

See the list of options on page 9.

&No. of Quick

Flashes = Option

or( (Press

User Configuration - Optional Programming

USER MODES are identified by a slow LED flashing pattern. For example, 1 slow flash = Mode1 and 2 slow flashes = Mode 2.

Module Programming

If the vehicle is equipped with Keyless Data, press any button on the factory remote. If it is not available, tap both Keyless Data wires to (-) Ground for a short instant.

The LED turns ON solid while the wires are connected.

Once the module has been properly connected, the LED turns ON and then turns OFF.

Rev.: 20100105



Follow the procedure described in the User Configuration - Optional Programming section on page 8 to enter a Mode.

MODE 8 - To reset the options to zero.*OPTION 1 = No reset. OPTION 2 = Complete reset of the options and restart of the module.

* Default option.

MODE 9 - Optional programming of the Trunk, Aux 1 and Aux 2 features.

.

Default values:- Trunk: Open trunk.- Aux 1: Open driver-side sliding door (when applicable).- Aux 2: Open right passenger-side sliding door (when applicable).

For example, to open the trunk, we could want to unlock the doors (to disarm the factory alarm), open the trunk and lock the doors (to arm the factory alarm) just by pressing the TRUNK button.

1. Connect the wires associated to the feature you want to program Trunk, Aux 1 or Aux 2 to (-) Ground.2. Activate the option by pressing the LOCK or UNLOCK button on the remote start transmitter.3. The LED turns ON. You will have 10 seconds to begin step 4.4. Press all factory-remote buttons you want to create your sequence. The delay between each command MUST NOT

exceed 3 seconds.5. Wait for the LED to turn OFF, then release the wires from (-) Ground.6. The LED will then flash twice quickly to indicate that the operation was successful. If it flashes once quickly, start again

from step 1.7. To exit the programming mode, press and hold the Programming button until the LED flashes once quickly

Start procedurePress and release the lock button, and immediately press the START* button. Once the engine has started, the parking lights stay on during the entire time the engine is running (10 minutes).

To add 10 minutes to the engine runtimeOnce the vehicle is remotely started, press and release the lock button, and immediately press the START* button. This will add 10 minutes to the engine runtime.

Stop procedureOnce the vehicle has been started remotely, it can be stopped by pressing the START* button.

* The required button sequence for each operation may vary depending on the remote control you are using. Please refer to its corresponding user guide for more information.

The vehicle cannot be started more than twice using the range extender for the factory remote start system. It has to be re-started with the key before any other attempt to remote start. Please refer to the vehicle user guide for more information.

Feature and Option List

Remote Start Procedure (with an XL202 in Installation C)

Rev.: 20100105



This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.:Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only.

For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete product and Part description.

This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE PART AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.920-0007 07-06

PROTECTED BY U.S. PATENTS: 5,719,551; 6,011,460 B1 *;6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7 , 0 4 6 , 1 2 6 B 1 ; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; CDN. PATENT: 2,320,248; 2,414,991; 2,415,011; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2 , 4 2 0 , 9 4 7 ; 2,426,670; 2,454,089 EUROPEAN PATENT:1,053,128 PAT. PENDING: 2,291,306; MADE IN CANADA

Limited One-Year Consumer Warranty

Rev.: 20100105



platform: xk09 firmware: dlgm5x - microsoft · pdf file · 2015-09-28downloadable...

Documents