phoenix model wx belt filter press phoenix process 2402 ... flyer.pdf · features heavy all-welded...
TRANSCRIPT
FEATURES
Heavy all-welded main frame
Modular construction
Continuous automatic operation
Open design
Epoxy over zinc coated frame
Pneumatic belt tracking/tensioning
Standard, extended, independent or dual gravity zones
Assures component alignment.
Allows variable roller configuration for max-imum process flexibility.
Minimal operator attention. Low maintenance requirement.
Allows easy access to all components.
Maximum corrosion protection in adverse conditions.
Clean, safe operation. Greater reliability.
Versatility. Effective dewatering performance.
BENEFITS
PHOENIX ProcessEquipment Co.
PHOENIX ProcessEquipment Co.
2402 Watterson TrailLouisville, KY 40299
(502) 499-6198FAX (502) 499-1079
Email: [email protected]
WX BELT FILTER PRESS IS AVAILABLE FOR ON-SITE FIELD DEMONSTRATIONS
PHOENIX Model WX Belt Filter Press
PHOENIX has expanded its already popular line of Model WX belt filter presses. The Model WX is available in several different configurations, each suited to the specific application. Design includes fully welded mainframe, oversized bearings, and unique corrosion protection features. Several different compression zone arrangements are available.
Model WXModel WX
PROCESS DESCRIPTION
1. Preconditioning (Flocculation): Most applications require the addition of polymers to the slurry prior to dewatering. The addition of these flocculants results in the agglomeration of solids, releasing free moisture. An inline mixer is provided for proper dispersal of polymer into the feed.
2. Feed Distribution: The slurry is fed to a specially designed head box, where the material is evenly distributed for more efficient use of the filtering area.
3. Gravity Drainage: Free moisture is separated from the solids by drainage through the moving filter belt.
4. Wedge Pressure: Material advancing from the drainage zone is deposited into the wedge zone. Pressure is gradually applied as the upper and lower belts converge to form a "cake sandwich."
5. Compression/Shear: The belts then follow an "S" path through a series of compression rollers. The surface pressure created by belt tension squeezes additional moisture from the solids. Simultaneous shearing of the material opens additional voids for moisture release. The belts part, leaving a dry cake.
6. Solids Discharge: Cake is separated from the belts by doctor blades and discharged.
APPLICATIONS
• Coal Refuse• Scrubber Effluent• Pulp and Paper Effluent• Domestic Biological Waste
• Textile Wastewater• Grease Trap Waste• Water Treatment Sludge• Aggregate Tailings
• Food Process Waste• Chemical Waste• Municipal Wastewater• Dredging Slurries
MODEL WX SCHEMATIC
FOR SEPARATION, CLASSIFICATION, AND DEWATERINGSYSTEMS CUSTOM BUILT FOR FLEXIBILITY, CALL PHOENIX