pechatnaya plata i shtekkery 2012-2013

Connectors and PCB Terminal Blocks

Full Line Catalog, Volume 2 Edition: 2012/2013

2

WAGO Registered Trademarks

CAGE CLAMP CAGE CLAMP@ POWER CAGE CLAMP FIT CLAMP PUSH WIRE TOPJOB TOPJOB@ WINSTA

WAGO X-COM X-COM@ JUMPFLEX TO-PASS ProServe EPSITRON picoMAX

WAGO trademarks are brand names or territorial registered marks of WAGO Kontakttechnik GmbH & Co. KG

WAGO Full Line CatalogsVolume 1, Rail-Mounted Terminal Block Systems ail-Mounted Terminal Blocks R odular Connectors (X-COM -SYSTEM and X-COM -SYSTEM) M atchboard Systems P erminal Strips T USH WIRE Connectors for Junction Boxes P ighting Connectors L hield Connecting System S Volume 2, Connectors and PCB Terminal Blocks CB Terminal Blocks P eedthrough Terminal Blocks F ULTI CONNECTION SYSTEM M luggable PCB Connectors P pecialty Connectors S

Volume 3, AUTOMATION IP20ModularI/O-SYSTEM WirelessTechnology,TO-PASS Telecontrol Technology IndustrialSwitches,PERSPECTO IP67ModularI/O-SYSTEM,IP67BlockI/O-SYSTEM IP67Sensor/ActuatorBoxes,IP67CablesandConnectors PowerSupplies Volume 4, INTERFACE ELECTRONIC elays Optocouplers Special Functions R nterface Modules I ransducers T owerSupplies P vervoltage Protection O ireless Technology W mpty Housings and Mounting Carriers E Volume 5, WINSTA The Connection System WINSTA MINI Connectors WINSTA MINI special Connectors WINSTA MIDI Connectors WINSTA MIDI special Connectors WINSTA MAXI Connectors WINSTA RD Cable Assemblies WINSTA KNX Connectors WINSTA IDC Flat Cables

12

Operation of WAGO Connection Technologies*

! "'

The universal connection with @PECIAL Handling: - Open clamping unit - Insert the conductor - Release clamp done! - Terminate both solid and ferruled conductors by simply pushing them in no operating tool needed.

The universal connection for solid, stranded and fine-stranded conductors Handling: - Open clamping unit - Insert the conductor - Release clamp done!

The universal connection for conductors larger than 6 AWG (16 mm2) Handling: - penclampingunitbyturningappropriatehexwrench,or O operatingtool,counter-clockwise. - Press integrated latch to open clamping unit for hands-free wiring. - Insert conductor until it hits backstop. - small,counter-clockwiserotationclosestheclamp, A securing conductor. Insulation Displacement Connection (IDC) Handling: Push unstripped conductor into the IDC contact using an operating tool.

% $

PUSH WIRE connection for solid and stranded conductors (depending on model used) Handling: Tool-free,twist-freeterminationsforsolidandrigid stranded conductors simply push into unit.

*Pleasefollowapplicableproductinstructionsforproduct-specifichandling.

CONTENTS

VOLUME 2

Connectors and PCB Terminal Blocks 14199

PCB Terminal Blocks

1 2 3 4 5 6 7 8 9 10 11 12

Feedthrough Terminal Blocks

200221

MCS MULTI CONNECTION SYSTEM MICRO PinSpacing2.5mm(0.098in)/0.080.5mm2(AWG2825)

222239

MCS MULTI CONNECTION SYSTEM MINI / MINI HD PinSpacing3.5mm(0.138in),3.81mm(0.15in)/0.081.5mm2 (AWG2814)

240299

MCS MULTI CONNECTION SYSTEM MIDI 100 % Protected Against Mismating PinSpacing5mm(0.197in),7.5mm(0.295in)/0.082.5mm2 (AWG2812) MCS MULTI CONNECTION SYSTEM MIDI Classic PinSpacing5mm(0.197in),5.08mm(0.2in),7.5mm(0.295in), 7.62mm(0.3in)/0.082.5mm2(AWG2812)

300361

362484

MCS MULTI CONNECTION SYSTEM MAXI PinSpacing7.62mm(0.3in)/0.510mm2(AWG208)

488497

Pluggable PCB Connectors PinSpacing3.5mm(0.138in),5mm(0.197in),5.75mm(0.226in )

498507

Specialty Connectors Tap-OffConnectors,10-and20-PoleConnectors CompactConnectorsforKNX/EIBApplications

508523

ACCESSORIES TECHNICAL SECTION SEARCH AIDS

Tools; Ferrules Testing Accessories; Alu-Plus-Contact Paste Marking Mounting Accessories Technical Information Approvals - User Guide Training Courses; Laboratory E-Technik Index Item Numbers WAGO Addresses

Index

524 535 536539 540543 544546 549591 592595 596599 602607 608621 622623

PCB Terminal Blocks Product Overview by Pin Spacing 42.5 mm, 2.54 mm 0.098 in, 1.0 in233 Series

3.5 mm, 3.81 mm / 0.138 in, 0.15 in739Series 739Series

3.96 mm, 4 mm 0.156 in

0.080.5 mm2/AWG2820 Page 19 218Series

"

0.081.5 mm2/AWG2814 Page 75, 76, 77

"

0.081.5 mm2 /AWG2814 Page 71, 72

"


"THR 2060Series 4 SMT

0.080.5 mm2/AWG2820 Page 85 233 Series

"235 Series 3.81 805Series 3.5


!


"


!3.5


!THR 3.5

0.51.5 mm2/AWG2016 Page 135

!


"


!3.5


!THR 3.5

0.080.5 mm2 /AWG2420 Page 123 250Series

!THR 2.5


!3.5


!3.81

0.080.5 mm2 /AWG2420 Page 127

!

0.51.0/1.5 mm2/AWG2018/16 0.5 1.5 mm2 /AWG2016 Page 171 sol. Page 151 sol. 744Series 3.5 735Series 3.81

% $

$

0.20.5 mm2 /AWG2420 Page 173

$

0.51.5 mm2 /AWG2016 0.5 1.5 mm2 /AWG2016 Page 169 sol. Page 175 sol.

$

$

4 Ex e II approval

Press-in technology

THR

Through-holereflowsoldering

SMT

Surface Mount Technology

55 mm, 5.08 mm / 0.197 in, 0.2 in236Series

4"

236Series

THR 5

745Series

45

0.082.5 mm2 /AWG2812* Page 21, 23 739Series

0.082.5 mm2 /AWG2812* Page 25 739Series

"

0.084 mm2 /AWG2812 Page 27, 29, 33, 35 740Series

"5 816Series 5

0.082.5 mm2 /AWG2812* Page 75, 77 Disconnect and test terminal blocks, 742Series

"

0.082.5 mm2 /AWG2812* Page 71, 73

"

0.082.5 mm2 /AWG2812* Page 79

"

2x0.21.5 mm2 /2xAWG2416 Page 115

!

Terminalblockswithpotentialcommoning, Fuse terminal blocks, 742Series 742Series


"


"


"

0.082.5 mm2 /AWG2812* Page 47, 51 255 Series

"


"


"

4"

4"5

4"5 804Series 5

0.082.5 mm2 /AWG2812* Page 95 97 235 Series

0.082.5 mm2 /AWG2812* Page 99 101 250Series


0.51.5 mm2 /AWG2016 0.51.5 mm2 /AWG2014 Page 137, 139 (2-onductor 179, 181) Page 129 235 Series 254 Series

!

!

2x0.51.5 mm2/AWG2016 Page 131 253 Series 5

!

0.22.5 mm2 /AWG2812 Page 149 735Series

!5

0.52.5 mm2 /AWG2014 0.52.5 mm2 /AWG2014 Page 153, 155 (2-onductor 157, 159) Page 163, 165 Feedthrough terminal blocks, 741Series Feedthrough terminal blocks, 231,731Series

$

$

2x0.51.5 mm2 /2xAWG2016 Page 167

$

0.51.5 mm2 /AWG2016 Page 177

$

0.082.5 mm2 /AWG2812* Page 211, 213, 215, 217

"

0.082.5 mm2 /AWG2812* Page 219, 221

"*AWG 12: THHN, THWN

only available in this pin spacing

PCB Terminal Blocks Product Overview by Pin Spacing 67.5 mm, 7.62 mm / 0.295 in, 0.3 in236Series

10 mm, 10.16 mm / 0.394 in, 0.4 in

4"

745Series

4"

745Series

4"

236Series

4"

745Series

410


0.084 mm2 /AWG2812 Page 29

0.24 mm2 /AWG2812 Page 33, 35 746Series


4"739Series

410

0.084 mm2 /AWG2812 Page 31 745Series

"

410

0,26 mm2/AWG2410 Page 37, 39, 41 739Series

2x0.510 mm2/2xAWG208 Page 117 2706Series 7,5

!

0.26 mm2 /AWG2410 Page 37, 39, 41 2706Series

"10


"10


"


"

0,56 mm2/AWG2010 Page 107, 109

"


"


"

0.082.5 mm2 /AWG2812* Page 48, 52 255 Series

"


"


"


"

4"

4"7.5

4"7.5

255 Series

4"

4"





0.082.5 mm2 /AWG2812* Page 99 101

0.51.5 mm2 /AWG2014 Page 137, 139, (2-conductor 179, 181) 235 Series

!

0.51.5 mm2 /AWG2016 Page 129 254 Series

!

0.22.5 mm2/AWG2812 Page 149

!

0.51.5 mm2 /AWG2014 Page 137, 139, (2-conductor 179, 181) 235 Series

!254 Series

0.52.5 mm2 /AWG2014 Page 153, 155, (2-onductor 157, 159) Feedthrough terminal blocks, 741Series

$

0.52.5 mm2 /AWG2012* Page 163, 165

$

0.52.5 mm2/AWG2014 sol. 0.52.5 mm2/AWG2012 sol. Page 153, 155, (2-onductor 157, 159) Page 163, 165 Feedthrough terminal blocks, 741Series

$

$

0.082.5 mm2 /AWG2812* Page 211, 213, 215, 217

"Press-in technology

0.082.5 mm2 /AWG2812* Page 211, 213, 215, 217

"*AWG 12: THHN, THWN

4 Ex e II approval


710 mm, 10,16 mm745Series

12.5 mm / 0.492 in745Series

15 mm / 0.591 in745Series

20 mm / 0.787 in745Series

4102

4"

4"

4"

0.084 mm /AWG2812 Page 33, 35

"



0.216 mm2 /AWG246 Page 43, 45

4"

4"

0.26 mm2 /AWG2410 Page 39 739Series 2706Series


0.082.5 mm2 /AWG2812* Page 76

"

0.56 mm2 /AWG2010 Page 107, 109

"

1.5 16 mm2 /AWG166 Page 111, 113

"

257Series

4"

0.082.5 mm2 /AWG2812* Page 103 105

MCS MULTI CONNECTION SYSTEM Product Overview by Pin Spacing 8MICRO 2.5 mm / 0.098 inFemale connectors, 733Series Female connectors, 734Series

MINI 3.5 mm, 3.81 mm / 0.138 in, 0.15 inFemaleconnectorswithlockinglevers, Femaleconnectorswithscrewflanges, 734Series 734Series

MINI HD 3.5 mm / 0,138 inFemale connectors, 713Series

0.080.5 mm2 / AWG 2820 Page 227

"

0.081.5 mm2 / AWG2814 Page 245, 246 Femaleconnectorswithsnap-in mounting feet, 721Series

"

0.081.5 mm2 / AWG2814 Page 245, 246

"

0.081.5 mm2 / AWG2814 Page 245

"

0.081.5 mm2 / AWG2816 Page 285

"

Femaleconnectorswithlockinglevers, 733Series

Femaleconnectorswithpush-buttons, 2734Series

Femaleconnectorswithpush-buttons and locking levers, 2734Series

Femaleconnectorswithseparators, 713Series

0.080.5 mm2 / AWG 2820 Page 227 Maleheaderswithsolderpins, 733Series

"

0.081.5 mm2 / AWG2814 Page 246, 247

"

0.21.5 mm2 / AWG 24 14 Page 249, 250

!

0.21.5 mm2 / AWG 24 14 Page 249, 250

!

0.081.5 mm2 / AWG2816 Page 285

"

Femaleconnectorswithpush-buttons andfixingflanges, 2734Series

Femaleconnectorswithpush-buttons andfixingflanges, 3.5 2734Series

Femaleconnectorswithscrewflanges, 713Series

Page 229 Male headers, 733Series

0.21.5 mm2 / AWG 24 14 Page 249, 251 Maleheaderswithsolderpins, 734Series

!

0.21.5 mm2 / AWG 24 14 Page 250 Maleheaderswithsolder pins and threaded flanges, 734Series

!3.5 Male headers, 734Series

0.081.5 mm2 / AWG2816 Page 285

"

Maleheaderswithsolderpins, 713Series THR

Page 229 Maleheaderswithsolder pins,733Series THR

Page 253, 257

Page 254 THR

Page 255, 258

Page 287, (THR: Page 291, 292) Maleheaderswithsolderpinsand separators,713Series THR

Double-deckmaleheaderswithsolder Maleheaderswithsolder pins,734Series pins,734Series

Page 231, 232 Male connectors, 733Series


Page 261 263 Maleconnectorswithsnap-in mounting feet, 734Series Maleconnectorswithfixingflanges, 734Series

Page 288, (THR: Page 293, 294) Maleheaderswithsolderpinsand threadedflanges,713Series THR

0.080.5 mm2 / AWG 2820 Page 235

"

0.081.5 mm2 / AWG2814 Page 265, 267

"

0.081.5 mm2 / AWG2814 Page 266, 267 Combistrips,734Series

"3.5

0.081.5 mm2 / AWG2814 Page 265, 266

"Page 289, (THR: Page 295, 296)

Maleconnectorswiththreaded 3.5 flanges,734Series

0.081.5 mm2 / AWG2814 Page 265 Femaleheaderswithsolderpins, 734Series

"

3.5 mm2/0.081.5 mm2 Page 269

"

Femaleheaderswithsolderpins and locking levers, 734Series

Page 271, 272

Page 271 273

Press-in technology

THR



9MINI SL 3.5 mm / 0,138 inFemale connectors, 714Series Female connectors, 721Series

MIDI 100 % Protected Against Mismating 5 mm / 0.197 inFemaleconnectorswithlockinglevers, Femaleconnectorswithfixingflanges, Femaleconnectorswithsnap-in 721Series 721Series mounting feet, 721Series

0.21.5 mm2 / AWG 24 10 Page 279 Maleheaderswithsolderpins, 714Series

!

0.082.5 mm2 / AWG2812 Page 305 Angled female connectors, 722Series

"

0.082.5 mm2 / AWG2812 Page 305 Femaleconnectorswithfixing flanges for panel mounting, 721Series

"

0.082.5 mm2 / AWG2812 Page 305, 306 Femaleconnectorswithsnap-in mounting feet for panel mounting, 721Series

"

0.082.5 mm2 / AWG2812 Page 306

"

Page 281

0.082.5 mm2 / AWG2812 Page 307 Femaleconnectorswithpushbuttons,2721Series

"

0.082.5 mm2 / AWG2812 Page 309 Femaleconnectorswithpushbuttons and snap-in mounting feet, 2721Series

"

0.082.5 mm2 / AWG2812 Page 309 Femaleconnectorswithpushbuttons and locking levers, 2721Series

"Femaleconnectorswithpushbuttonsandfixingflanges, 2721Series

0.22.5 mm2 / AWG 24 12 Page 311 2-conductor female connectors, 721Series

!

0.22.5 mm2 / AWG 24 12 Page 311

!

0.22.5 mm2 / AWG 24 12 Page 311

!

0.22.5 mm2 / AWG 24 12 Page 312

!

2-conductorfemaleconnectorswith locking levers, 721Series


!

0.22.5 mm2 / AWG 24 12 Page 315 Male headers, 721Series

!


Page 317 Maleconnectorswithsnap-in mounting feet, 721Series Maleconnectorswithfixingflanges, Maleconnectorswithsnap-inflanges, 721Series 721Series


"

0.082.5 mm2 / AWG2812 Page 321 Femaleheaderswithsolderpins and locking levers, 722Series

"

0.082.5 mm2 / AWG2812 Page 321 Femaleheaderswithsolderpins andfixingflanges, 722Series

"

0.082.5 mm2 / AWG2812 Page 323 Femaleheaderswithsolderpins and spacers, 722Series

"

Page 325 Male connectors for rail-mounted terminalblocks,721Series

Page 325, 326 Female connectors for rail-mounted terminalblocks,722Series

Page 326 Female connectors for rail-mounted terminalblockswithlockinglevers, 722Series

Page 327

Page 329

Page 331

Page 332

MCS MULTI CONNECTION SYSTEM Product Overview by Pin Spacing 10MIDI Classic 5 mm, 5.08 mm / 0.197 in, 0.2 inFemale connectors, 231 Series Femaleconnectorswithintegrated end plate, 231 Series Femaleconnectorswithsnap-in mounting feet, 231 Series Femaleconnectorswithlockinglevers, Femaleconnectorswithfixingflanges, 231 Series 231 Series

0.082.5 mm2 / AWG2812 Page 367, 370 Angled female connectors, 232 Series

"

0.082.5 mm2 / AWG2812 Page 367, 370

"

0.082.5 mm2 / AWG2812 Page 369, 371

"

0.082.5 mm2 / AWG2812 Page 368, 371

"

0.082.5 mm2 / AWG2812 Page 368, 372

"

Femaleconnectorswithscrewflanges, Femaleconnectorswithfixingflanges, Femaleconnectorswithsnap-in mounting feet for panel mounting, 231 Series for panel mounting, 731Series 731Series 5 5.08 5

0.082.5 mm2 / AWG2812 Page 369, 373

"

0.082.5 mm2 / AWG2812 Page 371

"

0.082.5 mm2 / AWG2812 Page 375 Femaleconnectorswithpushbuttons and snap-in mounting feet, 2231 Series

"

0.082.5 mm2 / AWG2812 Page 375 Femaleconnectorswithpushbuttons and locking levers, 2231 Series

"Femaleconnectorswithpushbuttonsandfixingflanges, 2231 Series

Femaleconnectorswithpush-buttons, Femaleconnectorswithpush2231 Series buttons and integrated end plate, 2231 Series

0.22.5 mm2 / AWG 24 12 Page 377, 379

!

0.22.5 mm2 / AWG 24 12 Page 377, 379

!

0.22.5 mm2 / AWG 24 12 Page 378, 380

!

0.22.5 mm2 / AWG 24 12 Page 377, 379

!

0.22.5 mm2 / AWG 24 12 Page 378, 380

!

2-conductor female connectors, Femaleconnectorswithpush231 Series buttonsandscrewflanges, 5.08 2231 Series

2-conductorfemaleconnectorswith 2-conductor female connectors 5.08 locking levers, withscrewflanges, 231 Series 231 Series

0.22.5 mm2 / AWG 24 12 Page 380 Maleheaderswithsolderpins, 231 Series

!

0.22.5 mm2 / AWG 24 12 Page 383, 384 Maleheaderswithsolder pinsandfixingflanges, 231 Series

!5

0.22.5 mm2 / AWG 24 12 Page 383, 384 Maleheaderswithsolder pins and threaded flanges, 231 Series

!

0.22.5 mm2 / AWG 24 12 Page 384

!Maleheaderswithsolder pins, 231 Series THR 5

Male headers for double-deck 5.08 assembly, 232 Series

Page 387, 388, 390, 391 Male connectors, 231 Series

Page 388, 389 Maleconnectorswithsnap-in mounting feet, 231 Series

Page 391, 392

Page 395

Page 397 400

Maleconnectorswithfixingflanges, Maleconnectorswithsnap-inflanges, Maleconnectorswiththreadedflanges, 231 Series 231 Series 231 Series 5.08

0.082.5 mm2 / AWG2812 Page 403, 405

"

0.082.5 mm2 / AWG2812 Page 403, 405 Double-pin male connectors for DIN 35 rail mounting, 232 Series

"

0.082.5 mm2 / AWG2812 Page 403, 405

"

0.082.5 mm2 / AWG2812 Page 404, 406 Femaleheaderswithsolderpins, 232 Series

"

0.082.5 mm2 / AWG2812 Page 406 Femaleheaderswithsolderpins and locking levers, 232 Series

"

Maleconnectorswithsnap-inflanges and threaded flanges, 5.08 231 Series

0.082.5 mm2 / AWG2812 Page 406 Femaleheaderswithsolderpins andfixingflanges, 232 Series

"Page 409 Femaleheaderswithsolderpins and spacers, 232 Series Male connectors for rail-mounted terminal blocks, 231 Series 5 Page 411, 414 Female connectors for rail-mounted terminal blocks, 232 Series 5 Page 411, 412, 414, 415 Female connectors for rail-mounted terminalblockswithlockinglevers, 232 Series 5

Page 412, 415

Page 412, 416

Page 419

Page 421

Page 422

THR



11MIDI 100 % Protected Against Mismating 7.5 mm / 0.295 inFemale connectors, 721Series Femaleconnectorswithsnap-in mounting feet, 721Series Femaleconnectorswithlocking levers,721Series Femaleconnectorswithfixing flanges, 721Series

0.082.5 mm2 / AWG2812 Page 335 Femaleconnectorswithfixing flanges for panel mounting, 721Series

"

0.082.5 mm2 / AWG2812 Page 336 Femaleconnectorswithsnap-in mounting feet for panel mounting, 721Series

"

0.082.5 mm2 / AWG2812 Page 335

"

0.082.5 mm2 / AWG2812 Page 335, 336

"

0.082.5 mm2 / AWG2812 Page 339 Femaleconnectorswithpushbuttons,2721Series

"

0.082.5 mm2 / AWG2812 Page 339 Femaleconnectorswithpushbuttons and snap-in mounting feet, 2721Series

"Femaleconnectorswithpushbuttons and locking levers, 2721Series Femaleconnectorswithpushbuttons andfixingflanges, 2721Series

0.22.5 mm2 / AWG 24 12 Page 341 2-conductor female connectors, 721Series

!

0.22.5 mm2 / AWG 24 12 Page 341

!

0.22.5 mm2 / AWG 24 12 Page 341

!

0.22.5 mm2 / AWG 24 12 Page 342

!

2-conductorfemaleconnectorswith locking levers, 721Series


!

0.22.5 mm2 / AWG 24 12 Page 345

!

Page 347, 348 Male connectors, 723Series Maleconnectorswithsnap-in mounting feet, 723Series Maleconnectorswithfixingflanges, Maleconnectorswithsnap-inflanges, 723Series 721Series


"

0.082.5 mm2 / AWG2812 Page 351 Femaleheaderswithsolderpins and locking levers, 722Series

"

0.082.5 mm2 / AWG2812 Page 351 Femaleheaderswithsolderpins andfixingflanges, 722Series

"

0.082.5 mm2 / AWG2812 Page 353 Femaleheaderswithsolderpins and spacers, 722Series

"

Page 355

Page 355, 356

Page 356

Page 357

MCS MULTI CONNECTION SYSTEM Product Overview by Pin Spacing 12MIDI Classic 7.5 mm, 7.62 mm / 0.295 in, 0.3 inFemale connectors, 231 Series Femaleconnectorswithsnap-in mounting feet, 231 Series Femaleconnectorswithlockinglevers, Femaleconnectorswithfixing 231 Series flanges, 231 Series

MAXI 7.62 mm / 0.3 inFemale connectors, 831Series

0.082.5 mm2 / AWG2812 Page 425, 427 Angled female connectors, 732Series

"

0.082.5 mm2 / AWG2812 Page 426, 428 Femaleconnectorswithfixing flanges for panel mounting, 731Series

"

0.082.5 mm2 / AWG2812 Page 425, 427

"

0.082.5 mm2 / AWG2812 Page 425, 426, 427, 428

"

0.510 mm2 / AWG208 Page 493

!

Femaleconnectorswithsnap-on mounting feet for panel mounting, 731Series 7.5

Femaleconnectorswithlockinglevers, 831Series

0.082.5 mm2 / AWG2812 Page 426, 428

"

0.082.5 mm2 / AWG2812 Page 431

"

0.082.5 mm2 / AWG2812 Page 431

"Femaleconnectorswithpush-buttons andfixingflanges, 2231 Series

0.510 mm2 / AWG208 Page 493 Maleheaderswithsolderpins, 831Series

!

Femaleconnectorswithpush-buttons, Femaleconnectorswithpush-buttons Femaleconnectorswithpush-buttons and locking levers, 2231 Series and snap-in mounting feet, 2231 Series 2231 Series

0.22.5 mm2 / AWG 24 12 Page 433, 434 2-conductor female connectors, 231 Series

!

0.22.5 mm2 / AWG 24 12 Page 433, 434

!

0.22.5 mm2 / AWG 24 12 Page 433, 435

!

0.22.5 mm2 / AWG 24 12 Page 434, 435

!Page 495 Male connectors, 831Series

2-conductorfemaleconnectorswith locking levers, 231 Series

0.22.5 mm2 / AWG 24 12 Page 437, 438 Maleheaderswithsolderpins, 231 Series

!

0.22.5 mm2 / AWG 24 12 Page 437, 438

!Maleheaderswithsolderpins, 231 Series THR 7.5

0.510 mm2 / AWG208 Page 497

!

Maleheaderswithsolderpinsand fixingflanges, 7.5 231 Series

Male connectors for DIN 35 rail mounting, 831Series

Page 441, 442, 444, 445 Male connectors, 731Series

Page 442, 443 Maleconnectorswithsnap-in mounting feet, 731Series

Page 447 450 Maleconnectorswithfixingflanges, Maleconnectorswithsnap-inflanges, 731Series 231 Series

0.510 mm2 / AWG208 Page 497

!

0.082.5 mm2 / AWG 28 12 Page 453, 454 Double-pin male connectors for DIN 35 rail mounting, 232 Series

"

0.082.5 mm2 / AWG 28 12 Page 453, 455

"

0.082.5 mm2 / AWG 28 12 Page 453, 454

"

0.082.5 mm2 / AWG 28 12 Page 453, 455

"

Page 457 Femaleheaderswithsolderpins, 232 Series Femaleheaderswithsolderpins and locking levers, 232 Series Femaleheaderswithsolderpins andfixingflanges, 232 Series Femaleheaderswithsolderpins and spacers, 232 Series

Page 459, 462

Page 459, 460, 462, 463

Page 460, 463

Page 461, 464

THR



Connectors for:13Pin Spacing 3.5 mm / 0.138 in2-conductor, compact PCB connectors, 252 Series

Pin Spacing 5 mm, 5.75 mm / 0.197 in, 0.23 in2-conductor PCB connector strips (pinstrippluggable),806Series

Special ApplicationsTap-off connectors, 730Series

KNX/EIB ApplicationsConnectors for bus coupler units, 243 Series

2x0.40.8 mm /2xAWG2620 Page 503 sol. 2-conductor compact PCB connectors, 252 Series

$

2x0.21.5mm2 /2xAWG2416 Page 505 4-conductor, modular PCB connectors, 243 Series

!

0.751.5 mm2 / AWG1816 Page 513, 514 10-and20-poleconnectors, 246Series

% "

4x0.60.8 mm / AWG 22 20 Page 522 sol.

$

2x0.40.8 mm /2xAWG2620 Page 503 sol.

$

4x0.40.8 mm /4xAWG2418 Page 507 sol.

$

0.082.5 mm2 / AWG2814 Page 519, 520

"

14

1 Connection Technologies for PCB Terminal Blocks

" $ %

The universal connection with @PECIAL Open clamping unit, insert the conductor, release clamp done! Terminate both solid and ferruled conductors by simply pushing them in no operating tool needed.

!

The universal connection for solid, stranded and fine-stranded conductors Open clamping unit, insert the conductor, release clamp done!

PUSH WIRE connection for solid and stranded conductors (depending on model used) Tool-free,twist-freeterminationsforsolid and rigid stranded conductors simply push into unit.

Insulation Displacement Connection (IDC) Insert unstripped conductor into the clamping unit. Press on the IDC contact using an operating tool until fully engaged.

Modular PCB Terminal Blocks and Strips

Product overview sorted by pin spacing, see pages 4 7

Modular PCB Terminal Blocks and Strips with Screwdriver Actuation, CAGE CLAMP

Nominal Cross Section0.5mm2/AWG20 2.5 mm2/AWG12 4;6;16mm2/AWG12,10,6 2.5 mm2/AWG12 2.5 mm2/AWG12 2.5 mm2/AWG12 1.5; 2.5 mm2/AWG14,12 2.5 mm2/AWG12 0.5mm2/AWG20 0.5mm2/AWG20 0.5mm2/AWG20 2.5 mm2/AWG12 2.5 mm2/AWG12 2.5 mm2/AWG12 6mm2/AWG10 16mm2/AWG6 1.5 mm2/AWG16 10mm2/AWG8

Series233 236 745 736 737 738 739 740

1

115

1

Pages

Modular PCB Terminal Blocks and Strips with Push-Buttons, Locking Slides and Levers, CAGE CLAMP

1819 2025 2645 4653 4761 6265 7077 7879 8285 8889 9091 9497 98101 102105 106109 110113 114 115 116117

PCB Terminal Strips with Screwdriver Actuation, CAGE CLAMPS

218 233 234 255 256 257 2706 2716 816 746

PCB Terminal Strips with Push-Buttons, CAGE CLAMPS

Modular PCB Terminal Blocks and Strips with Screwdriver Actuation, PUSH WIRE

0.75mm2/AWG18 0.5;1.5;2.5mm2/AWG20,16,14 0.75;1.5mm2/AWG18,16 1,5 mm2/AWG16 1.5 mm2/AWG16 2.5 mm2/AWG12 0.75;1.5;2.5mm2/AWG18,16,14 2.5 mm2/AWG12 1.5 mm2/AWG16 1.5 mm2/AWG16 1.5 mm2/AWG16

2060 250 235 2081 805 804 235 254 253 744 251

118119 122 131 132139 140143 146147 148149 150159 162165 166167 168169 170171

Modular PCB Terminal Blocks and Strips with Push-Buttons, PUSH WIRE Disconnect, Test and Fuse Terminal Blocks with Screwdriver Actuation, CAGE CLAMP

0,5mm2/AWG20 1.5 mm2/AWG16 0.75;1.5mm2/AWG18,16

2080 735 235

172173 174177 178181

2.5 mm2/AWG12

742

184195

Accessories for PCB Terminal Blocks Accessories, General - Section 10

196199 524546

16

1

Description and Handling 233, 236, 736, 737, 738, 739, 740 and 745 Series

Insertingconductorvia3.5mmscrewdriver. Screwdriveractuationparalleltoconductorentry.

Insertingconductorvia3.5mmscrewdriver. Screwdriveractuationperpendiculartoconductorentry.

Inserting conductor via operating tool.

Pin spacing combination

736 Series

Combiningterminalblockswithdifferentpinspacing.

Space-efficient configuration

Terminal strips placed behind each other save space staggeringthembyhalfthepinspacingsimplifies subsequentwiringofthefirstrow.

Marking

Testing

Marking via self-adhesive strips ... CAGE CLAMP clamps the following copper conductors:* solid * For aluminum conductors, see notes in Section 11.

... or factory direct printing.

Testing via contact area above the conductors.

stranded

fine-stranded, alsowithtinned single strands

"117

1

Insertingconductorperpendiculartoscrewdriveractuation 740Series.

Insertingconductorparalleltoscrewdriveractuation 739Series.

Inserting/removingconductorvia5.5mmscrewdriver 745Series,16mm2.

745 Series

Toinsertcomb-stylejumperbar,pushitdownusinga screwdriveruntilithitsthebackstop745Series.

To remove comb-style jumper bar, lift it up using a screwdriver745Series.

Space requirement

Marking

Testing

Lowspacerequirementsduetohigh-densitydesign double-deckterminalstrip736Series.

MarkingwithminiatureWSBandWMBmarkersor factorydirectprinting745Series.

Testingwithtestplug745Series.

fine-stranded, tip-bonded

fine-strandedwith crimped ferrules (gas-tight)

fine-strandedwith crimped pin terminal (gas-tight)

18

1

PCB Terminal Strips 0.5 mm2 Pin Spacing 2.5 mm, 2.54 mm 233 Series

ompactterminalstripswithCAGECLAMP connection, C screwdriveractuationparallelorperpendicularto conductor entry Double solder pins for high mechanical stability Custom color combinations

or233Serieswithpush-buttons,seepage89 F

Technical data: Pin Spacing Rating per Overvoltage category Pollution degree Rated voltage Rated surge voltage Nominal current Approvals per UsegroupUL1059 Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology Conductor size: solid Conductorsize:fine-stranded Conductorsize:fine-stranded Conductorsize:fine-stranded AWG Strip length Conductor entry angle Solderpin:length/width Solder pin: drilled hole diameter Material data: Material group Insulating material FlammabilityratingperUL94 Lower/Uppertemperaturelimit Clamping spring material Contact material Contact plating I Nylon6.6(PA6.6) V0 60C/+105C Chrome-nickel spring steel (CrNi) Electrolytic copper (ECu) tin-plated CAGE CLAMP 0.080.5mm2 * 0.080.5mm2 * 0.25mm2(withinsulatedferrule) 0.25mm2(withuninsulatedferrule) 2820 56mm/0.200.24in 30toPCB 4mm/0.5x0.75mm 1.1+0.1 mm 2.5 mm 2.54 mm 0.098 in 0.1 in IEC/EN 60664-1 IEC/EN 60664-1 III III II III III II 3 2 2 3 2 2 63V 160V 320V 63V 160V 320V 2.5 kV 2.5 kV 2.5 kV 2.5 kV 2.5 kV 2.5 kV 6A 6A 6A 6A 6A 6A UL/CSA UL/CSA B C D B C D 150V 150V 4A 4A 4A 4A Current-Carrying Capacity Curve Pinspacing:2.5mm/Conductorsize:0.5mm2 f-st Basedon:EN60512-5-2/Reductionfactor:1Current in A

8 6 4 2 0

10

20

30

40

50

60

70

80

90 100 105

AmbienttemperatureC

2-, 4-, 6-, 12-pole

Conductor rated current

233 Series accessories: Marking accessories Operating tools

Page: 540543 526528

* erminating0.75mm2/AWG18conductorsispossible;howeverinsulationdiameterdoesnotallowclampingunitsto T beterminatedinarow.

Approvalsareavailableonlineat:www.wago.comFormoretechnicalinformation,seeSection11

PCB Terminal Strips 0.5 mm2

"119Pin spacing 2.54 mm / 0.1 in AWG2820 150V/4A

Pin spacing 2.5 mm / 0.098 in 0.080.5mm2 160V/2.5kV/26A AWG2820 150V/4A

0.080.5mm2 160V/2.5kV/26A

1

> 4 < > < > 4 7,7

10 < > 4 __

< L 1 __> _ 0,9 1,5 _ _ __< < L __> 4 __

< L 1 __ _> ____ _ 0,9 1,5 __< < L __ _ ____ __> 4 __

< L 1 ____> _____ 1,5 0,9 _ __< < L ____> 6,4 < > 7,3 < > 10 6,9

2,8 1,2 __> < > 6,9 < > 6,4 < > 7,3 ( _) 5 6,9 < _

3,1 > 6,9 < > 6,4 < > 7,3 < > 7,5 6,9

>

0 __,8 > 3,1 >

>

0 __,8 >

>

>

36

1

Modular PCB Terminal Blocks with Jumper Slots 6 mm2 Pin Spacing 7.5 mm, 10 mm 745 Series

Modular terminal blocks with screwdriver-actuated CAGE CLAMP for custom terminal strip assemblies

4 versions with Ex e (increased safety) approvalSpacers for higher voltage applications Double solder pins for high mechanical stability Integrated test port

Comb-style jumper bars for commoning and distributing potentials

Marker slot for miniature WSB and WMB markers

Technical data: Pin Spacing Rating per Overvoltage category Pollution degree Rated voltage Rated surge voltage Nominal current Approvals per Use group UL1059 Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology Conductor size: solid Conductor size: fine-stranded Conductor size: fine-stranded Conductor size: fine-stranded AWG Strip length Conductor entry angle Solder pin: length/width Solder pin: drilled hole diameter Material data: Material group Insulating material Flammability rating per UL 94 Lower/Upper temperature limit Clamping spring material Contact material Contact plating Technical data for Ex e II (4) versions: Pin Spacing I Nylon 6.6 (PA 6.6) V0 60C / +105C Chrome-nickel spring steel (CrNi) Electrolytic copper (ECu) tin-plated CAGE CLAMP 0.2 6 mm2 0.2 6 mm2 0.25 4 mm2 (with insulated ferrule) (with uninsulated ferrule) 0.25 4 mm2 24 10 11 12 mm / 0.39 0.43 in 45 to PCB 4.5 mm / 1 x 1.4 mm 1.8+0.1 mm 7.5 mm 10 mm 0.295 in 0.394 in IEC/EN 60664-1 IEC/EN 60664-1 III III II III III II 3 2 2 3 2 2 500 V 630 V 1000 V 630 V 1000 V 1000 V 6 kV 6 kV 6 kV 8 kV 8 kV 8 kV 41 A 41 A 41 A 41 A 41 A 41 A UL/CSA UL/CSA B C D B C D 300 V 150 V 300 V 300 V 150 V 300 V 30 A 30 A 10 A 30 A 30 A 10 A 30 A 30 A 10 A 30 A 30 A 10 A Current-Carrying Capacity Curve Pin spacing: 7.5 mm / Conductor size: 6 mm2 f-st Based on: EN 60512-5-2 / Reduction factor: 1Current in A

40 30 20 10 0

10

20

30

40

50

60

70

80

90 100 105

Ambient temperature C

2-, 4-, 6-, 12-pole


745 Series accessories: Marking accessories Operating tools Comb-style jumper bars Test plugs

Page: 540 543 526 528 197 538

7.5 mm 0.295 in

10 mm 0.394 in

Rating per ATEX: PTB 06 ATEX 1014 U IECEx: IECEx PTB 06.0039 U Rated voltage 275 V Nominal current without jumpers 37 A Nominal current with jumpers 31 A

440 V 37 A 31 A

Note on UL approval for 600 V: The conductor entry is for field and factory wiring and meets spacing requirements for 600 V UL (Use Group: C). The solder pins are for factory wiring only. The suitability and spacing shall be evaluated in the end-use equipment, based on relevant end-product standard.

Approvals are available online at: www.wago.com

For more technical information, see Section 11

Modular PCB Terminal Blocks with Jumper Slots 6 mm2

"137

Pin spacing 7.5 mm / 0.295 in 0.2 6 mm2 630 V/6 kV/2 41 A AWG 24 10 300 V/10 A

Pin spacing 10 mm / 0.394 in 0.2 6 mm2 1000 V/8 kV/2 41 A AWG 24 10 300 V/10 A

1

23

4,5

1

1

8 12,5

7,5> 4,15

4,5

23

8 12,5

10> 6,65

Color

Item No.

Pack. Unit

Color

Item No.

Pack. Unit

Modular terminal block with jumper slot, 2 solder pins/pole gray light gray blue green-yellow light green Ex e II 745-831 745-833 745-834 745-837 745-838 745-833/999-950 100 (2 x 50) 100 (2 x 50) 100 (2 x 50) 100 (2 x 50) 100 (2 x 50)

Modular terminal block with jumper slot, 2 solder pins/pole gray light gray blue green-yellow light green Ex e II 745-841 745-843 745-844 745-847 745-848 745-843/999-950 100 (2 x 50) 100 (2 x 50) 100 (2 x 50) 100 (2 x 50) 100 (2 x 50)

Suitable for Ex i applications Product Item No. Accessories Spacer (commoning via spacer is not possible) 2.5 mm thick, gray 745-338

Suitable for Ex i applications Pack. Unit

500 (10 x 50)

End plates, 745 Series 6 mm2 End plate, snap-on type, 1.6 mm thick, gray End plate with fixing flange, gray End plate with fixing flange, gray Item no. suffixes for end plates in different colors: blue light gray green-yellow light green . . . - . . . /000-006 . . . - . . . /000-009 . . . - . . . /000-016 . . . - . . . /000-017

Item No. 745-300 745-340 745-345

Pack. Unit 100 50 50

Ordering example: End plate with fixing flange, light gray: 745-340/000-009

For other colors, please contact factory.

38

1

PCB Terminal Strips 6 mm2 Pin Spacing 10 mm, 12.5 mm, 15 mm 745 Series

Terminal strips with screwdriver-actuated CAGE CLAMP (cannot be commoned!)

4 versions with Ex e (increased safety) approvalCustom color combinations Double solder pins for high mechanical stability Integrated test ports

UL approval up to 600 V for 12.5 mm pin spacing


Technical data: Pin Spacing Rating per Overvoltage category Pollution degree Rated voltage Rated surge voltage Nominal current Approvals per Use group UL1059 Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology Conductor size: solid Conductor size: fine-stranded Conductor size: fine-stranded Conductor size: fine-stranded AWG Strip length Conductor entry angle Solder pin: length/width Solder pin: drilled hole diameter Material data: Material group Insulating material Flammability rating per UL 94 Lower/Upper temperature limit Clamping spring material Contact material Contact plating Technical data for Ex e II (4) versions: Pin Spacing Rating per Rated voltage Nominal current I Nylon 6.6 (PA 6.6) V0 60C / +105C Chrome-nickel spring steel (CrNi) Electrolytic copper (ECu) tin-plated CAGE CLAMP 0.2 6 mm2 0.2 6 mm2 0.25 4 mm2 (with insulated ferrule) (with uninsulated ferrule) 0.25 4 mm2 24 10 11 12 mm / 0.43 0.47 in 45 to PCB 4.5 mm / 1 x 1.4 mm 1.8+0.1 mm 10 mm 12.5 mm 15 mm 0.394 in 0.492 in 0.591 in IEC/EN 60664-1 IEC/EN 60664-1 IEC/EN 60664-1 III III II III III II III III II 3 2 2 3 2 2 3 2 2 800 V 1000 V 1000 V 1000 V 1000 V 1000 V 1000 V 1000 V 1000 V 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 41 A 41 A 41 A 41 A 41 A 41 A 41 A 41 A 41 A UL/CSA UL/CSA UL/CSA B C D B C D B C D 300 V 300 V 600 V 600 V 600 V 600 V 600 V 10 A 10 A 5A 30 A 30 A 30 A 30 A 10 A 10 A 5A 30 A 30 A 30 A 30 A Current-Carrying Capacity Curve Pin spacing: 7.5 mm / Conductor size: 6 mm2 f-st Based on: EN 60512-5-2 / Reduction factor: 1Current in A

40 30 20 10 0

10

20

30

40

50

60

70

80

90 100 105


2-, 4-, 6-, 12-pole


745 Series accessories: Marking accessories Operating tools Test plugs

Page: 540 543 526 528 538

10 mm 12.5 mm 15 mm 0.394 in 0.492 in 0.591 in ATEX: PTB 06 ATEX 1014 U IECEx: IECEx PTB 06.0039 U 440 V 550 V 690 V 37 A 37 A 37 A




PCB Terminal Strips 6 mm2

"139Pin spacing 12.5 mm / 0.492 in 0.2 6 mm2 1000 V/8 kV/2 41 A AWG 24 10 600 V/30 A Pin spacing 15 mm / 0.591 in 0.2 6 mm2 1000 V/8 kV/2 41 A AWG 24 10 600 V/30 A


1

L1 L

L1 L

L1 L

L = (pole no. 1) x pin spacing + 7.5 mm ^ L1 = L +1.6 mm = without fixing flanges Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit

Terminal strip, 2 solder pins/pole, gray



2 3 4 5 6 7 8 9 10 12

745-1352 745-1353 745-1354 745-1355 745-1356 745-1357 745-1358 745-1359 745-1360 745-1362

104 72 48 40 32 24 24 24 16 16

2 3 4 5 6 7 8 9 10 12

745-1402 745-1403 745-1404 745-1405 745-1406 745-1407 745-1408 745-1409 745-1410 745-1412

80 48 40 32 24 24 16 16 16 8

2 3 4 5 6 7 8 9 10 12

745-1452 745-1453 745-1454 745-1455 745-1456 745-1457 745-1458 745-1459 745-1460 745-1462

64 40 32 24 16 16 16 8 8 8

Item no. suffix for terminal strips with fixing flanges: . . . - . . . /005-000 Item no. suffixes for Ex e II and Ex i applications: Ex e II Ex i . . . - . . . /000-009/999-950 . . . - . . . /000-006 Ordering examples: Terminal strip without fixing flanges, 10 mm pin spacing, 8-pole, Ex e II: Terminal strip with fixing flanges, 10 mm pin spacing, 8-pole, Ex e II:

745-1358/000-009/999-950 745-1358/005-009/999-950

Item no. suffixes for colored terminal strips: (Production and prices depend on quantity required) black blue light gray green-yellow light green green . . . - . . . /000-004 . . . - . . . /000-006 . . . - . . . /000-009 . . . - . . . /000-016 . . . - . . . /000-017 . . . - . . . /000-023 Ordering examples: Terminal strip without fixing flanges, 10 mm pin spacing, 8-pole, light gray: 745-1358/000-009 (. . . - . . . /000- . . . without fixing flanges) with fixing flanges, 10 mm pin spacing, 8-pole, light gray: 745-1358/005-009 (. . . - . . . /005- . . . with fixing flanges)

Please contact factory for other lengths, colors, mixed-color terminal strips, or direct marking.

40

1

PCB Terminal Strips with Jumper Slots 6 mm2 Pin Spacing 7.5 mm, 10 mm 745 Series

4 versions with Ex e (increased safety) approvalCustom color combinations double solder pins for high mechanical stability Integrated test ports

Terminal strips with screwdriver-actuated CAGE CLAMP

Comb-style jumper bars for looping through and distributing potentials


Technical data: Pin Spacing Rating per Overvoltage category Pollution degree Rated voltage* Rated surge voltage Nominal current Approvals per Use group UL1059 Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology Conductor size: solid Conductor size: fine-stranded Conductor size: fine-stranded Conductor size: fine-stranded AWG Strip length Conductor entry angle Solder pin: length/width Solder pin: drilled hole diameter Material data: Material group Insulating material Flammability rating per UL 94 Lower/Upper temperature limit Clamping spring material Contact material Contact plating Technical data for Ex e II (4) versions: Pin Spacing Rating per ATEX: PTB 06 ATEX 1014 U Rated voltage Nominal current without jumpers Nominal current with jumpers I Nylon 6.6 (PA 6.6) V0 60C / +105C Chrome-nickel spring steel (CrNi) Electrolytic copper (ECu) tin-plated CAGE CLAMP 0.2 6 mm2 0.2 6 mm2 0.25 4 mm2 (with insulated ferrule) (with uninsulated ferrule) 0.25 4 mm2 24 10 11 12 mm / 0.43 0.47 in 45 to PCB 4.5 mm / 1 x 1.4 mm 1.8+0.1 mm 7.5 mm 10 mm 0.295 in 0.394 in IEC/EN 60664-1 IEC/EN 60664-1 III III II III III II 3 2 2 3 2 2 500 V 630 V 1000 V 630 V 1000 V 1000 V 6 kV 6 kV 6 kV 8 kV 8 kV 8 kV 41 A 41 A 41 A 41 A 41 A 41 A UL/CSA UL/CSA B C D B C D 300 V 150 V 300 V 300 V 150 V 300 V 30 A 30 A 10 A 30 A 30 A 10 A 30 A 30 A 10 A 30 A 30 A 10 A Current-Carrying Capacity Curve Pin spacing: 7.5 mm / Conductor size: 6 mm2 f-st Based on: EN 60512-5-2 / Reduction factor: 1Current in A

40 30 20 10 0

10

20

30

40

50

60

70

80

90 100 105


2-, 4-, 6-, 12-pole



Page: 540 543 526 528 197 538

7.5 mm 0.295 in

10 mm 0.394 in

IECEx: IECEx PTB 06.0039 U 275 V 440 V 37 A 37 A 31 A 31 A

* Using adjacent jumpers, the rated voltage is reduced to 400 V with pin spacing of 7.5 mm in Category III/3.




PCB Terminal Strips with Jumper Slots 6 mm2

"141

Pin spacing 7.5 mm / 0.295 in 0.2 6 mm2 630 V/6 kV/2 41 A AWG 24 10 300 V/10 A


1

> 10,2

13

< > 4,5 23

0,9 1,6 __< < _____ L ____> 10,2

13

< ______ L 1 ______> 0,9 1,6 ______ L ______> < __< < ___ < 7,5 10 < _ < > 4,5

3,55 < __> < > 8,2 < 9,1 _ 9,2 _ _ 7,5 9,2 ) (

4,2 _) < > 8,2 < 10 9,2

L = (pole no. 1) x pin spacing + 7.5 mm ^ L1 = L + 1.6 mm = without fixing flanges Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit

Terminal strip with jumper slot, 2 solder pins/pole, gray 2 3 4 5 6 7 8 9 10 12 745-302 745-303 745-304 745-305 745-306 745-307 745-308 745-309 745-310 745-312 128 88 64 48 40 40 32 24 24 16

Terminal strip with jumper slot, 2 solder pins/pole, gray 2 3 4 5 6 7 8 9 10 12 745-352 745-353 745-354 745-355 745-356 745-357 745-358 745-359 745-360 745-362 104 72 48 40 32 24 24 24 16 16

Item no. suffix for terminal strips with fixing flanges: . . . - . . . /005-000 Item no. suffixes for Ex e II and Ex i applications: Ex e II Ex i . . . - . . . /000-009/999-950 . . . - . . . /000-006 Ordering examples: Terminal strip without fixing flanges, 10 mm pin spacing, 8-pole, Ex e II: Terminal strip with fixing flanges, 10 mm pin spacing, 8-pole, Ex e II:

3,55 >

745-358/000-009/999-950 745-358/005-009/999-950

Item no. suffixes for colored terminal strips: (Production and prices depend on quantity required) black blue light gray green-yellow light green green . . . - . . . /000-004 . . . - . . . /000-006 . . . - . . . /000-009 . . . - . . . /000-016 . . . - . . . /000-017 . . . - . . . /000-023 Ordering examples: Terminal strip without fixing flanges, 10 mm pin spacing, 8-pole, light gray: 745-308/000-009 (. . . - . . . /000- . . . without fixing flanges) with fixing flanges, 10 mm pin spacing, 8-pole, light gray: 745-308/005-009 (. . . - . . . /005- . . . with fixing flanges)


42

1

Modular PCB Terminal Blocks with Jumper Slots 16 mm2 Pin Spacing 10 mm, 15 mm, 20 mm 745 Series

Modular terminal blocks with screwdriver-actuated CAGE CLAMP for custom terminal strip assemblies

4 versions with Ex e (increased safety) approvalUL approval up to 600 V for 20 mm pin spacing Four solder pins for high mechanical stability Integrated test port



Technical data: Pin Spacing Rating per Overvoltage category Pollution degree Rated voltage Rated surge voltage Nominal current Approvals per Use group UL 1059 Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology Conductor size: solid Conductor size: fine-stranded Conductor size: fine-stranded Conductor size: fine-stranded AWG Strip length Conductor entry angle Solder pin: length/width Solder pin: drilled hole diameter Material data: Material group Insulation material Flammability rating per UL 94 Lower/Upper temperature limit Clamping spring material Contact material Contact plating Technical data for Ex e II (4) versions: Pin Spacing Rating per Rated voltage Nominal current without jumpers Nominal current with jumpers I Nylon 6.6 (PA 6.6) V0 60C / +105C Chrome-nickel spring steel (CrNi) Electrolytic copper (ECu) tin-plated CAGE CLAMP 0.2 16 mm2 0.2 16 mm2 0.25 10 mm2 (with insulated ferrule) (with uninsulated ferrule) 0.25 10 mm2 24 6 12 13 mm / 0.47 0.51 in 45 to PCB 6.5 (5) mm / 1.2 x 1.6 mm 2.2+0.1 mm 10 mm 0.394 in IEC/EN 60664-1 III III II 3 2 2 320 V 320 V 630 V 4 kV 4 kV 4 kV 76 A 76 A 76 A UL/CSA B C D 300 V 300 V 10 A 10 A 10 A 10 A 15 mm 20 mm 0.591 in 0.787 in IEC/EN 60664-1 IEC/EN 60664-1 III III II III III II 3 2 2 3 2 2 630 V 1000 V 1000 V 1000 V 1000 V 1000 V 8 kV 8 kV 8 kV 12 kV 12 kV 12 kV 76 A 76 A 76 A 76 A 76 A 76 A UL/CSA UL/CSA B C D B C D 300 V 300 V 600 V 600 V 600 V 65 A 65 A 5A 65 A 65 A 65 A 65 A 5A 65 A 65 A Current-Carrying Capacity Curve Pin spacing: 10 mm / Conductor size: 16 mm2 f-st Based on: EN 60512-5-2 / Reduction factor: 1Current in A

80 60 40 20 0

10

20

30

40

50

60

70

80

90 100 105


2-, 3-, 4-, 5-pole



Page: 540 543 526 528 197 538

10 mm 15 mm 20 mm 0.394 in 0.591 in 0.787 in ATEX: PTB 06 ATEX 1014 U IECEx: IECEx PTB 06.0039 U 220 V 440 V 690 V 71 A 71 A 71 A 53 A 53 A 53 A




Modular PCB Terminal Blocks with Jumper Slots 16 mm2

"143Pin spacing 20 mm / 0.787 in AWG 24 6 600 V/65 A



0.2 16 mm2 1000 V/12 kV/2 76 A

1

>6,5

>6,5

> 15 8,7 <

> > >

10 4 3

> 15 8,7 <

> >

15 1,6 > 8

> 15 8,7 <

>6,5 > 20 > >

< 4 13

Color

Order No.

Pack. Unit

Color

Item No.

Pack. Unit

Color

Item No.

Pack. Unit

Modular terminal block with jumper slot, 4 solder pins/pole gray light gray blue green-yellow light green Ex e II 745-851/006-000 745-853/006-000 745-854/006-000 745-857/006-000 745-858/006-000 745-853/006-000/999-950 100 100 100 100 100



Suitable for Ex i applications

Suitable for Ex i applications . . . - . . . /007-000

Suitable for Ex i applications

Item no. suffix for modular terminal blocks with 5 mm long solder pins:

End plates, 745 Series 16 mm2 End plate, snap-on type, 1.7 mm thick, gray End plate with fixing flange, gray End plate with fixing flange, gray Item no. suffixes for end plates in different colors: blue light gray green-yellow light green . . . - . . . /000-006 . . . - . . . /000-009 . . . - . . . /000-016 . . . - . . . /000-017

Item No. 745-500 745-540 745-545

Pack. Unit 500 (10 x 50) 200 (4 x 50) 200 (4 x 50)

Ordering example: End plate with fixing flange, light gray: 745-540/000-009


44

1

PCB Terminal Strips with Jumper Slots 16 mm2 Pin Spacing 10 mm, 15 mm, 20 mm 745 Series

Terminal strips with screwdriver-actuated CAGE CLAMP

4 versions with Ex e (increased safety) approvalUL approval up to 600 V for 20 mm pin spacing Four solder pins for high mechanical stability Integrated test ports



Technical data: Pin Spacing Rating per Overvoltage category Pollution degree Rated voltage Rated surge voltage Nominal current Approvals per Use group UL 1059 Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology Conductor size: solid Conductor size: fine-stranded Conductor size: fine-stranded Conductor size: fine-stranded AWG Strip length Conductor entry angle Solder pin: length/width Solder pin: drilled hole diameter Material data: Material group Insulation material Flammability rating per UL 94 Lower/Upper temperature limit Clamping spring material Contact material Contact plating Technical data for Ex e II (4) versions: Pin Spacing Rating per Rated voltage Nominal current without jumpers Nominal current with jumpers I Nylon 6.6 (PA 6.6) V0 60C / +105C Chrome-nickel spring steel (CrNi) Electrolytic copper (ECu) tin-plated CAGE CLAMP 0.2 16 mm2 0.2 16 mm2 0.25 10 mm2 (with insulated ferrule) (with uninsulated ferrule) 0.25 10 mm2 24 6 12 13 mm / 0.47 0.51 in 45 to PCB 6.5 (5) mm / 1.2 x 1.6 mm 2.2+0.1 mm 10 mm 0.394 in IEC/EN 60664-1 III III II 3 2 2 320 V 320 V 630 V 4 kV 4 kV 4 kV 76 A 76 A 76 A UL/CSA B C D 300 V 300 V 10 A 10 A 10 A 10 A 15 mm 20 mm 0.591 in 0.787 in IEC/EN 60664-1 IEC/EN 60664-1 III III II III III II 3 2 2 3 2 2 630 V 1000 V 1000 V 1000 V 1000 V 1000 V 8 kV 8 kV 8 kV 12 kV 12 kV 12 kV 76 A 76 A 76 A 76 A 76 A 76 A UL/CSA UL/CSA B C D B C D 300 V 300 V 600 V 600 V 600 V 65 A 65 A 5A 65 A 65 A 65 A 65 A 5A 65 A 65 A Current-Carrying Capacity Curve Pin spacing: 10 mm / Conductor size: 16 mm2 f-st Based on: EN 60512-5-2 / Reduction factor: 1Current in A

80 60 40 20 0

10

20

30

40

50

60

70

80

90 100 105


2-, 3-, 4-, 5-pole



Page: 540 543 526 528 197 538

10 mm 15 mm 20 mm 0.394 in 0.591 in 0.787 in ATEX: PTB 06 ATEX 1014 U IECEx: IECEx PTB 06.0039 U 220 V 440 V 690 V 71 A 71 A 71 A 53 A 53 A 53 A




PCB Terminal Strips with Jumper Slots 16 mm2

"145Pin spacing 20 mm / 0.787 in 0.2 16 mm2 1000 V/12 kV/2 76 A AWG 24 6 600 V/65 A



1

> 9,4 10 < > 10 9,4 1,7 1,7 __> 10 < > 15 9,4 10 <

3,6 > 3< __> ( )3< > 10,5 < > 8,8 < 4 9,5 > 10 9,5 3< > 10,5 < 9,5

1,6 __> < >3< > 8,8 < 4 > 15 9,5 3< > 10,5 < 9,5

1,6 > 3< > 8,8 < 4 > 20 9,5 5 10 <

> 5 10 <

>4 10 < > 3 < 0,7 > 4 3 < 0,7 > 4

10,16

( _15,24_ )

4,1 5 10 <

> 5 10 <

>4 10 < 3 > 10 < __> > 4 10 < 0,7 4,1 1,8 1,8 > 10 < __> > 5,08 10,16 <

> 5,08 10,16 <

>4 10,16 < 3 > 10,16 < __> _ > 4 10,16 < __> > ,5

< ________ 37 ________> ,5

>44 > 3

1,7 5,08 < > 6,3

0,8 > 6,3

Pack. Unit

Terminal strip, 1 press-in pin/pole, orange 3 4 5 6 7 8 9 10 12 739-153/100-000 739-154/100-000 739-155/100-000 739-156/100-000 739-157/100-000 739-158/100-000 739-159/100-000 739-160/100-000 739-162/100-000 280 (4 x 70) 220 (4 x 55) 160 (4 x 40) 140 (4 x 35) 120 (4 x 30) 100 (4 x 25) 100 (4 x 25) 80 (4 x 20) 60 (4 x 15)

Terminal strip, 1 press-in pin/pole, orange 3 4 5 6 7 8 9 10 12 739-233/100-000 739-234/100-000 739-235/100-000 739-236/100-000 739-237/100-000 739-238/100-000 739-239/100-000 739-240/100-000 739-242/100-000 220 (4 x 55) 160 (4 x 40) 120 (4 x 30) 100 (4 x 25) 80 (4 x 20) 80 (4 x 20) 60 (4 x 15) 60 (4 x 15) 40 (4 x 10)


74

1

PCB Terminal Strips 1.5 mm2 and 2.5 mm2 Pin Spacing 3.5 mm, 3.81 mm, 5 mm, 5.08 mm, 7.5 mm, 7.62 mm 739 Series

Terminal strips with screwdriver-actuated CAGE CLAMP Vertical conductor entry and conductor operation provide for space-saving positioning/grouping

Technical data: Pin Spacing Rating per Overvoltage category Pollution degree Rated voltage Rated surge voltage Rated voltage 3.5 mm Rated surge voltage 3.5 mm Rated voltage 3.81 mm Rated surge voltage 3.81 mm Nominal current Approvals per Use group UL 1059 Rated voltage Nominal current UL Nominal current CSA 3.5 mm, 3.81 mm 0.138 in, 0.15 in IEC/EN 60664-1 III III II 3 2 2 5 mm, 5.08 mm 0.197 in, 0.2 in IEC/EN 60664-1 III III II 3 2 2 320 V 320 V 630 V 4 kV 4 kV 4 kV 10 mm 7.5 mm, 7.62 mm 0.394 in 0.295 in, 0.3 in IEC/EN 60664-1 IEC/EN 60664-1 III III II III III II 3 2 2 3 2 2 500 V 630 V 1000 V 500 V 630 V 1000 V 6 kV 6 kV 6 kV 6 kV 6 kV 6 kV

160 V 2.5 kV 200 V 4 kV 17,5 A

160 V 2.5 kV 320 V 4 kV 17,5 A UL/CSA B C 300 V 6A

320 V 2.5 kV 500 V 4 kV 17,5 A D 300 V 6A

24 A UL/CSA B C 300 V 12 A 12 A

24 A

24 A D 300 V 10 A 10 A

24 A 24 A UL/CSA B C D 300 V 300 V 12 A 10 A 8A 8A

24 A

24 A 24 A UL/CSA B C D 300 V 300 V 12 A 10 A 8A 8A

24 A

Conductor and solder pin data for 3.5/3.81 mm pin spacing: Connection technology Conductor size: solid Conductor size: fine-stranded Conductor size: fine-stranded Conductor size: fine-stranded AWG Strip length Conductor entry angle Solder pin: length/width Solder pin: drilled hole diameter CAGE CLAMP 0.08 1.5 mm2 0.08 1.5 mm2 0.25 1.0 mm2 (with insulated ferrule) 0.25 1.5 mm2 (with uninsulated ferrule) 28 14 (14: THHN, THWN) 5 6 mm / 0.20 0.24 in 90 to PCB 3.4 mm / 0.6 x 0.8 mm 1.1+0.1 mm Current-Carrying Capacity Curve Pin spacing: 5 mm / Conductor size: 2.5 mm2 f-st Based on: EN 60512-5-2 / Reduction factor: 1Current in A

40 30 20 10 0

Conductor and solder pin data for 5/5.08 mm and 7.5/7.62 mm pin spacing: Connection technology Conductor size: solid Conductor size: fine-stranded Conductor size: fine-stranded Conductor size: fine-stranded AWG Strip length Conductor entry angle Solder pin: length/width Solder pin: drilled hole diameter Material data: Material group Insulating material Flammability rating per UL 94 Lower/Upper temperature limit Clamping spring material Contact material Contact plating I Nylon 6.6 (PA 6.6) V0 60C / +105C Chrome-nickel spring steel (CrNi) Electrolytic copper (ECu) tin-plated CAGE CLAMP 0.08 2.5 mm2 0.08 2.5 mm2 0.25 1.5 mm2 (with insulated ferrule) 0.25 2.5 mm2 (with uninsulated ferrule) 28 12 (12: THHN, THWN) 8 9 mm / 0.31 0.35 in 90 to PCB 3.2 mm / 0.8 x 1.2 mm 1.6+0.1 mm

10

20

30

40

50

60

70

80

90 100 105


2-, 4-, 6-, 12-pole


Current-Carrying Capacity Curve for 3,5 mm and 3,81 mm, see www.wago.com 739 Series accessories: Marking accessories Operating tools Screws Page: 540 543 526 528 546



PCB Terminal Strips 1.5 mm2 and 2.5 mm2

"175Pin spacing 5 mm / 0.197 in 0.08 2.5 mm2 320 V/4 kV/2 24 A AWG 28 12 300 V/10 A AWG 28 14 300 V/6 A

Pin spacing 3.5 mm / 0.138 in 0.08 1.5 mm2 160 V/2.5 kV/2 17.5 A AWG 28 14 300 V/6 A

With fixing flanges Pin spacing 3.5 mm / 0.138 in 0.08 1.5 mm2 160 V/2.5 kV/2 17.5 A

1

< 12,3 __> _

_ > 3,4 < 12,3 __> _ _7,5 _) 3,55 ( __> < 2,5 ___ 0,8 > 6,3 3,4 >

L = (pole no. x pin spacing) + 1.5 mm

L1 = pole no. x pin spacing L2 = L1 + 8.8 mm L3 = L1 + 14.8 mm Pack. Unit Pole No. Item No. Pack. Unit

L = (pole no. 1) x pin spacing + 5 mm +1.5 mm

Pole No.

Item No.

Pole No.

Item No.

1,5 5 > <

1,5 3,5 < > _

0,6 __< < < 5,7 3,5 > > >___ 0,8 __> >

0,6 __< < < 5,7 <

(5 ) 2,5 >

1,3 _) ___ 0,8 __> > 1,75 3,5 __> < > >___ _ 3,5 1,5 > 5 ___

_ < 15,8 ___> ___

< 12,3 __> _

3,5 __>

3,81 6,3 7,5

1 _ > 6,3 < 1,7



L = (pole no. 1) x pin spacing + 3.5 mm +1.5 mm

Pole No.

Item No.

Pack. Unit

Pole No.

Item No.

Pack. Unit

Pole No.

Item No.

1,5 3,5 < > _

0,6 __< < < 5,7 3,4 >

>

>

3,81 1,75 >___ > >___ 0,8 > >__

Pack. Unit

Terminal strip, 1 solder pin/pole, gray 2 3 4 5 6 7 8 9 10 12 739-202 739-203 739-204 739-205 739-206 739-207 739-208 739-209 739-210 739-212 340 (4 x 85) 220 (4 x 55) 160 (4 x 40) 120 (4 x 30) 100 (4 x 25) 80 (4 x 20) 80 (4 x 20) 60 (4 x 15) 60 (4 x 15) 40 (4 x 10)

Terminal strip, 1 solder pin/pole, gray 2 3 4 5 6 7 8 9 10 11 12 739-3202 739-3203 739-3204 739-3205 739-3206 739-3207 739-3208 739-3209 739-3210 739-3211 739-3212 520 (4 x 130) 360 (4 x 90) 280 (4 x 70) 220 (4 x 55) 180 (4 x 45) 160 (4 x 40) 140 (4 x 35) 120 (4 x 30) 120 (4 x 30) 100 (4 x 25) 100 (4 x 25)

Terminal strip, 1 solder pin/pole, orange 2 3 4 5 6 7 8 9 10 12 739-332 739-333 739-334 739-335 739-336 739-337 739-338 739-339 739-340 739-342 520 (4 x 130) 360 (4 x 90) 280 (4 x 70) 220 (4 x 55) 180 (4 x 45) 160 (4 x 40) 140 (4 x 35) 120 (4 x 30) 120 (4 x 30) 100 (4 x 25)


PCB Terminal Strips 2.5 mm2

"177Pin spacing 5.08 mm / 0.2 in Pin spacing 7.62 mm / 0.3 in 0.08 2.5 mm2 630 V/6 kV/2 24 A AWG 28 12 300 V/10 A AWG 28 12 300 V/10 A

with fixing flanges Pin spacing 3.81 mm / 0.15 in 0.08 1.5 mm2 320 V/4 kV/2 17.5 A AWG 28 14 300 V/6 A

0.08 2.5 mm2 320 V/4 kV/2 24 A

1

> 3,4 < 12,3 __> _ _ 3,55 ( 7,5_) __> ___

< 15,8 ___> ___ 0,8 > 6,3

(5) 2,5 >

1,3 _) ___ 0,8 __> > 1,75 3,81 ___> < > >___ _ 3,81 1,5 > 6,3 < 1,7 5,08 7,62

1,7 >

< dA___> ___

Metal-plated PCB hole

SMD positioning pattern

Application of solder paste

Component assembly automatic/by hand

5 < 0,75 2,4 2,54 > 5 4 5 5 4 < 13,2 __> _

> 5

7,7

0,7 ( ) 5 < (5,08) < L ___> ___

> 4 < 13,2 __> _

> 4 < 13,2 __> _

> 5 < 0,7 < >

_ > < 14___>< 9_ ___

_ > < 14___>< 9_ ___

_ > < 14___>< 9_ ___

> 5

7,7

0,7 < > 7,5 < (7,62) < _____ L _____>

> 5

7,7

L = (pole no. x pin spacing) + 2.9 mm

Pole No.

Item No.

Pack. Unit

Pole No.

Item No.

Pack. Unit

Pole No.

Item No.

Pack. Unit

Terminal strip with finger-operated levers, 2 solder pins/pole, gray 2 255-402/333-000 400 (4 x 100) 3 255-403/333-000 280 (4 x 70) 4 255-404/333-000 200 (4 x 50) 5 255-405/333-000 160 (4 x 40) 6 255-406/333-000 140 (4 x 35) 7 255-407/333-000 120 (4 x 30) 8 255-408/333-000 100 (4 x 25) 9 255-409/333-000 100 (4 x 25) 10 255-410/333-000 80 (4 x 20) 60 (4 x 15) 12 255-412/333-000 16 255-416/333-000 60 (4 x 15) 24 255-424/333-000 40 (4 x 10) Note: For lengths greater than 3 poles (5/5.08 mm pin spacing), finger lever operation for the center levers may not be possible due to finger size/spacing limitations. Item no. suffixes for Ex e II and Ex i applications: Ex e II Ex i

Terminal strip with finger-operated levers, 2 solder pins/pole, gray 2 3 4 5 6 7 8 9 10 12 16 24 255-502/333-000 255-503/333-000 255-504/333-000 255-505/333-000 255-506/333-000 255-507/333-000 255-508/333-000 255-509/333-000 255-510/333-000 255-512/333-000 255-516/333-000 255-524/333-000 280 (4 x 70) 180 (4 x 45) 140 (4 x 35) 120 (4 x 30) 100 (4 x 25) 80 (4 x 20) 60 (4 x 15) 60 (4 x 15) 60 (4 x 15) 40 (4 x 10) 40 (4 x 10) 20 (4 x 5)


. . . - . . . /333-009/999-950 . . . - . . . /333-006 (only for 7.5/7.62 mm and 10/10.16 mm pin spacing)

Ordering example: Terminal strip, 10/10.16 mm pin spacing, 10-pole, Ex e II: 255-610/333-009/999-950

Item no. suffixes for colored terminal strips: (Production and prices depend on quantity required) red blue dark gray light gray orange light green . . . - . . . /333-005 . . . - . . . /333-006 . . . - . . . /333-008 . . . - . . . /333-009 . . . - . . . /333-012 . . . - . . . /333-017 Ordering example: Terminal strip, 5/5.08 mm pin spacing, 2-pole, orange: 255-402/333-012


98

1

Modular PCB Terminal Blocks and Strips with Push-Buttons 2.5 mm2 Pin Spacing 5/5.08 mm, 7.5/7.62 mm, 10/10.16 mm 256 Series

Modular terminal blocks and terminal strips with push-button actuated CAGE CLAMP termination

4 version with Ex e (increased safety) approvalSet to metric or inch pin spacing by compressing terminal strips together or pulling them apart Ideal for in-the-field wiring thanks to simplified push-button actuation Convenient, tool-free operation

Technical data: Pin Spacing Rating per Overvoltage category Pollution degree Rated voltage Rated surge voltage Nominal current Approvals per Use group UL 1059 Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology Conductor size: solid Conductor size: fine-stranded Conductor size: fine-stranded Conductor size: fine-stranded AWG Strip length Conductor entry angle Solder pin: length/width Solder pin: drilled hole diameter Material data: Material group Insulating material Flammability rating per UL 94 Lower/Upper temperature limit Clamping spring material Contact material Contact plating Technical data for Ex e II (4) versions: Pin Spacing Rating per Rated voltage Nominal current 5/5.08 mm 7.5/7.62 mm 10/10.16 mm 0.197/0.2 in 0.295/0.3 in 0.394/0.4 in ATEX: PTB 06 ATEX 1061 U IECEx: IECEx PTB 06.0042 U 176 V 275 V 352 V 16 A 16 A 16 A I Nylon 6.6 (PA 6.6) V0 60C / +105C Chrome-nickel spring steel (CrNi) Electrolytic copper (ECu) tin-plated CAGE CLAMP 0.08 2.5 mm2 0.08 2.5 mm2 0.25 1.5 mm2 (with insulated ferrule) 0.25 1.5 mm2 (with uninsulated ferrule) 28 12 (12: THHN, THWN) 5 6 mm / 0.20 0.24 in 45 to PCB 4 (3.6; 5.5) mm / 0.7 x 0.7 mm 1.1+0.1 mm

5/5.08 mm 0.197/0.2 in IEC/EN 60664-1 III III II 3 2 2 250 V 320 V 630 V 4 kV 4 kV 4 kV 24 A 24 A 24 A UL/CSA B C D 300 V 300 V 15 A 10 A 15 A 10 A

7.5/7.62 mm 0.295/0.3 in IEC/EN 60664-1 III III II 3 2 2 320 V 320 V 630 V 4 kV 4 kV 4 kV 24 A 24 A 24 A UL/CSA B C D 300 V 300 V 15 A 10 A 15 A 10 A

10/10.16 mm 0.394/0.4 in IEC/EN 60664-1 III III II 3 2 2 500 V 630 V 1000 V 6 kV 6 kV 6 kV 24 A 24 A 24 A UL/CSA B C D 300 V 300 V 15 A 10 A 15 A 10 A

Current-Carrying Capacity Curve Pin spacing: 5 mm / Conductor size: 2.5 mm2 f-st Based on: EN 60512-5-2 / Reduction factor: 1Current in A

45 40 35 30 25 20 15 10 5 0 10 20 30 40 50 60 70 80 90 100 105 Ambient temperature CConductor rated current

2-, 4-, 6-, 12-pole

256 Series accessories: Marking accessories Operating tools Commoning strips Test plug adapter

Page: 540 543 526 528 67 69 196



Modular PCB Terminal Blocks with Push-Buttons 2.5 mm2

"199Pin spacing 10/10.16 mm / 0.4 in AWG 28 12 300 V/10 A

Pin spacing 5/5.08 mm / 0.2 in 0.08 2.5 mm2 320 V/4 kV/2 24 A AWG 28 12 300 V/10 A

Pin spacing 7.5/7.62 mm / 0.3 in 0.08 2.5 mm2 320 V/4 kV/2 24 A AWG 28 12 300 V/10 A

0.08 2.5 mm2 630 V/6 kV/2 24 A

1

5,2 4

(5,5) > 4

> 5

5 > 5 < (5,08)

> 5

5 < ,62) > 7,5 < (7

> 5

5 < > 10

2,6 4

> 5

3,65 5 < ___>

0,7 ___> < < > 5

> 5

3,65 5 < ___>

0,7 ___> < < > 7,5

> 5

3,65 5 < ___>

5,2 < 0,7 ___> < < > 10 6,6 6,6 6,6 4 < 13,6 __ _

> 4 < 13,6 __ _

_ > 4 < 13,6 __

6,8 2,15 > 5 < ___> < >3,1< > 10 < 14,2 __> _

2,15 ___> > 5 < > 5 < (5,08) >3,1< < 14,2 __> _

2,15 ___> < > 5 < ,62) > 7,5 < (7 >3,1< < 14,2 __> _

< (10,16)

Color

Item No. Item No.

Pack. Unit

Color

Item No. Item No.

Pack. Unit

Color

Item No. Item No.

Pack. Unit

Modular terminal block with push-button, 2 solder pins/pole Angled push-button gray red dark gray light gray blue orange light green Ex e II 257-451 257-840 257-842 257-843 257-844 257-846 257-847 Straight push-button 257-401 257-740 257-742 257-743 257-744 257-746 257-747 500 (5 x 100) 500 (5 x 100) 500 (5 x 100) 500 (5 x 100) 500 (5 x 100) 500 (5 x 100) 500 (5 x 100)



257-843/999-950

257-853/999-950

257-863/999-950

Suitable for Ex i applications Product Item No. Accessories Spacer for doubling the pin spacing 5/5.08 mm, gray 257-801 Pack. Unit Product Item No. Accessories Spacer for doubling the pin spacing 7.5/7.62 mm, gray 257-811 Pack. Unit

Suitable for Ex i applications Product Item No. Accessories Spacer for doubling the pin spacing 10/10.61 mm, gray 257-821 Pack. Unit

500 (5 x 100)

400 (4 x 100)

300 (3 x 100)

End plates for 257 Series, snap-on type, 1 mm/0.039 in thick

Color gray dark gray light gray blue red orange light green

Item No. 257-100 257-200 257-300 257-400 257-500 257-600 257-700

Pack. Unit 100 100 100 100 100 100 100


104

1

PCB Terminal Strips with Push-Buttons 2.5 mm2




6,8

6,8

> 4 < 13,6 __ __

_ > 4 < 13,6 __

> 5 < >3,1< < 14,2 __> _

3,65 ___>

0,7 < ___> < 5 < (5,08) >

> 5 < >3,1< < 14,2 __> _

3,65 ___>

0,7 < ___> < > 7,5 < (7,62) < ___________ L___________>

__ > 4 < 13,6 __

6,8

> 5 < >3,1< < 14,2 __> __

3,65 ___>

0,7 < ___> < > 10 < (10,16)

L = (pole no. x pin spacing) + 2.9 mm Dimensions for angled push-buttons, see page 103 Pole Item No. Item No. No. Terminal strip with push-buttons, 2 solder pins/pole, gray Angled push-button 2 3 4 5 6 7 8 9 10 12 16 24 36 48 257-452 257-453 257-454 257-455 257-456 257-457 257-458 257-459 257-460 257-462 257-466 257-474 257-486 257-498 Straight push-button 257-402 257-403 257-404 257-405 257-406 257-407 257-408 257-409 257-410 257-412 257-416 257-424 257-436 257-448 400 (4 x 100) 280 (4 x 70) 220 (4 x 55) 180 (4 x 45) 140 (4 x 35) 120 (4 x 30) 100 (4 x 25) 100 (4 x 25) 80 (4 x 20) 80 (4 x 20) 60 (4 x 15) 40 (4 x 10) 20 (4 x 5) 20 (4 x 5) Pack. Unit Pole Item No. Item No. No. Terminal strip with push-buttons, 2 solder pins/pole, gray Angled push-button 2 3 4 5 6 7 8 9 10 12 16 24 257-552 257-553 257-554 257-555 257-556 257-557 257-558 257-559 257-560 257-562 257-566 257-574 Straight push-button 257-502 257-503 257-504 257-505 257-506 257-507 257-508 257-509 257-510 257-512 257-516 257-524 280 (4 x 70) 200 (4 x 50) 140 (4 x 35) 120 (4 x 30) 100 (4 x 25) 80 (4 x 20) 80 (4 x 20) 60 (4 x 15) 60 (4 x 15) 40 (4 x 10) 40 (4 x 10) 20 (4 x 5) Pack. Unit Pole Item No. Item No. No. Terminal strip with push-buttons, 2 solder pins/pole, gray Angled push-button 2 3 4 5 6 7 8 9 10 12 16 24 257-652 257-653 257-654 257-655 257-656 257-657 257-658 257-659 257-660 257-662 257-666 257-674 Straight push-button 257-602 257-603 257-604 257-605 257-606 257-607 257-608 257-609 257-610 257-612 257-616 257-624 200 (4 x 50) 140 (4 x 35) 100 (4 x 25) 80 (4 x 20) 80 (4 x 20) 60 (4 x 15) 60 (4 x 15) 40 (4 x 10) 40 (4 x 10) 40 (4 x 10) 20 (4 x 5) 20 (4 x 5) Pack. Unit

Item no. suffixes for Ex e II and Ex i applications: Ex e IIEx e II Ex i . . . - . . . /000-009/999-950 . . . - . . . /000-006 (only for 10/10.16 mm pin spacing) Ordering example: Terminal strip, 10/10.16 mm pin spacing, 10-pole, Ex e II: 257-660/000-009/999-950

Item no. suffixes for colored terminal strips: (Production and prices depend on quantity required) red blue dark gray light gray orange light green . . . - . . . /000-005 . . . - . . . /000-006 . . . - . . . /000-008 . . . - . . . /000-009 . . . - . . . /000-012 . . . - . . . /000-017 Ordering example: Terminal strip, 5/5.08 mm pin spacing 8-pole, orange: 257-408/000-012


PCB Terminal Strips with Finger-Operated Levers 2.5 mm2

"1Pin spacing 10/10.16 mm / 0.4 in AWG 28 12 300 V/10 A

105



0.08 2.5 mm2 1000 V/8 kV/2 24 A

1

1,5 _ __> < 14,2 __> < 9,3_ _ >

1,5 _ __> < 14,2 __> < 9,3_ _ >

1,5 _ __> < 14,2 __> < 9,3_ _ >

> 4

> 5

3,1

0,7 ( ) 5 < (5,08) < L ___> ___

> 4

> 4

> 5

3,1

0,7 < > 7,5 < (7,62)

> 5

3,1

0,7 < >

L = (pole no. x pin spacing) + 2.9 mm Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit

Terminal strip with finger-operated levers, 2 solder pins/pole, gray 2 257-402/333-000 400 (4 x 100) 3 257-403/333-000 280 (4 x 70) 4 257-404/333-000 220 (4 x 55) 5 257-405/333-000 180 (4 x 45) 6 257-406/333-000 140 (4 x 35) 7 257-407/333-000 120 (4 x 30) 8 257-408/333-000 100 (4 x 25) 9 257-409/333-000 100 (4 x 25) 10 257-410/333-000 80 (4 x 20) 80 (4 x 20) 12 257-412/333-000 16 257-416/333-000 60 (4 x 15) 24 257-424/333-000 40 (4 x 10) Note: For lengths greater than 3 poles (5/5.08 mm pin spacing), finger lever operation for center levers may not be possible due to finger size/spacing limitations. Item no. suffixes for Ex e II and Ex i applications: Ex e II Ex i



. . . - . . . /333-009/999-950 . . . - . . . /333-006 (only for 10/10.16 mm pin spacing)

Ordering example: Terminal strip, 10/10.16 mm pin spacing; 10-pole, Ex e II: 257-610/333-009/999-950

Item no. suffixes for colored terminal strips: (Production and prices depend on quantity required) red blue dark gray light gray orange light green . . . - . . . /333-005 . . . - . . . /333-006 . . . - . . . /333-008 . . . - . . . /333-009 . . . - . . . /333-012 . . . - . . . /333-017 Ordering example: Terminal strip, 5/5.08 mm pin spacing 2-pole, orange: 257-402/333-012


106

1

PCB Terminal Strips with Operating Levers 6 mm2 Pin Spacing 7.5 mm, 10 mm, 12.5 mm 2706 Series

High-current terminal strips with lever-actuated CAGE CLAMP Tool-free opening and closing fingers open/close levers Several clamping units can be held open simultaneously convenient for terminating multi-core cables Double solder pins per contact point for high mechanical stability 600 V UL for 12.5 mm pin spacing

Technical data: Pin Spacing Rating per Overvoltage category Pollution degree Rated voltage Rated surge voltage Nominal current Approvals per Use group UL 1059 Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology Conductor size: solid Conductor size: fine-stranded Conductor size: fine-stranded Conductor size: fine-stranded AWG Strip length Conductor entry angle Solder pin: length/width Solder pin: drilled hole diameter Material data: Material group Insulating material Flammability rating per UL 94 Lower/Upper temperature limit Clamping spring material Contact material Contact plating I Polyamide 6.6 (PA 6.6) V0 60C / +105C Chrome nickel spring steel (CrNi) Electrolytic copper (ECu) tin-plated CAGE CLAMP 0.5 6 mm2 0.5 6 mm2 0.5 4 mm2 (with insulated ferrule) (with uninsulated ferrule) 0.5 4 mm2 20 10 11 12 mm / 0.43 0.47 in 30 to PCB 4.5 mm / 1.0 x 1.4 mm 1.8+0.1 mm 7,5 mm 0.295 in 10 mm 0.394 in 12,5 mm 0.492 in Current-Carrying Capacity Curve Pin spacing: 7.5 mm / Conductor size: 6 mm2 f-st Based on: EN 60512-5-2 / Reduction factor: 1Current in A

IEC/EN 60664-1 IEC/EN 60664-1 IEC/EN 60664-1 III III II III III II III III II 3 2 2 3 2 2 3 2 2 500 V 630 V 1000 V 800 V 1000 V 1000 V 1000 V 1000 V 1000 V 6 kV 6 kV 6 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 41 A 41 A 41 A 41 A 41 A 41 A 41 A 41 A 41 A UL/CSA* UL/CSA* UL/CSA* B C D B C D B C D

40 30 20 10 0

10

20

30

40

50

60

70

80

90 100 105


2-, 4-, 6-pole


2706 Series accessories: Marking accessories Test plugs

Page: 540 543 538


*UL/CSA approval pending


PCB Terminal Strips with Operating Levers 6 mm2

"1Pin spacing 12.5 mm / 0.492 in 0.5 6 mm2 1000 V/8 kV/2 41 A AWG 20 10

107

Pin spacing 7.5 mm / 0.295 in 0.5 6 mm2 630 V/6 kV/2 41 A AWG 20 10

Pin spacing 10 mm / 0.394 in 0.5 6 mm2 1000 V/8 kV/2 41 A AWG 20 10

1

> 7,5 10

12,5

< ( 12,5 ) ( 9,5)

1,4 > < ( 12,5 ) ( 9,5)

1,4 > < ( 12,5 ) ( 9,5)

4,5 ___>

4,5 ___>

L = pole no. x pin spacing Pole No. Item No. Pack. Unit

L = (pole no. x pin spacing) - 2.5 mm Pole No. Item No. Pack. Unit

L = (pole no. x pin spacing) - 5 mm Pole No. Item No. Pack. Unit

Terminal strip with operating levers, gray 2 3 4 5 6 7 8 9 10 11 12 2706-102 2706-103 2706-104 2706-105 2706-106 2706-107 2706-108 2706-109 2706-110 2706-111 2706-112 85 55 40 30 25 20 20 15 15 15 15



Item no. suffixes for colored terminal strips: (Production and prices depend on quantity required) blue light gray green-yellow light green . . . - . . . /000-006 . . . - . . . /000-009 . . . - . . . /000-016 . . . - . . . /000-017 Ordering example: Terminal strip with operating levers, 10 mm pin spacing, 8-pole, light gray: 2706-208/000-009


4,5 ___>

108

1

PCB Terminal Strips with Operating Levers and Jumper Slots 6 mm2 Pin Spacing 7.5 mm, 10 mm 2706 Series

High-current terminal strips with lever-actuated CAGE CLAMP Tool-free opening and closing fingers open/close levers Several clamping units can be held open simultaneously convenient for terminating multi-core cables Double solder pins per contact point for high mechanical stability Versions with commoning option for distributing potentials

Technical data: Pin Spacing Rating per Overvoltage category Pollution degree Rated voltage* Rated surge voltage Nominal current Approvals per Use group UL 1059 Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology Conductor size: solid Conductor size: fine-stranded Conductor size: fine-stranded Conductor size: fine-stranded AWG Strip length Conductor entry angle Solder pin: length/width Solder pin: drilled hole diameter Material data: Material group Insulating material Flammability rating per UL 94 Lower/Upper temperature limit Clamping spring material Contact material Contact plating I Polyamide 6.6 (PA 6.6) V0 60C / +105C Chrome nickel spring steel (CrNi) Electrolytic copper (ECu) tin-plated CAGE CLAMP 0.5 6 mm2 0.5 6 mm2 0.5 4 mm2 (with insulated ferrule) (with uninsulated ferrule) 0.5 4 mm2 20 10 11 12 mm / 0.43 0.47 in 30 to PCB 4.5 mm / 1.0 x 1.4 mm 1.8+0.1 mm 7,5 mm 0.295 in 10 mm 0.394 in Current-Carrying Capacity Curve Pin spacing: 7.5 mm / Conductor size: 6 mm2 f-st Based on: EN 60512-5-2 / Reduction factor: 1Current in A

IEC/EN 60664-1 IEC/EN 60664-1 III III II III III II 3 2 2 3 2 2 500 V 630 V 1000 V 630 V 1000 V 1000 V 6 kV 6 kV 6 kV 8 kV 8 kV 8 kV 41 A 41 A 41 A 41 A 41 A 41 A UL/CSA* UL/CSA* B C D B C D

40 30 20 10 0

10

20

30

40

50

60

70

80

90 100 105


2-, 4-, 6-pole


2706 Series accessories: Marking accessories Comb-style jumper bars Test plugs

Page: 540 543 197 538

* Using adjacent jumpers, the rated voltage is reduced to 400 V with pin spacing of 7.5 mm in Category III/3.


*UL/CSA approval pending


PCB Terminal Strips with Operating Levers and Jumper Slots 6 mm2Pin spacing 7.5 mm / 0.295 in 0.5 6 mm2 630 V/6 kV/2 41 A AWG 20 10 Pin spacing 10 mm / 0.394 in 0.5 6 mm2 1000 V/8 kV/2 41 A AWG 20 10

"1

109

1

> 7,5

10

< ( 12,5 ) ( 9,5)

1,4 >

L = pole no. x pin spacing Pole No. Item No. Pack. Unit

L = (pole no. x pin spacing) - 2.5 mm Pole No. Item No. Pack. Unit

Terminal strip with operating levers and jumper slot, gray 2 3 4 5 6 7 8 9 10 11 12 2706-152 2706-153 2706-154 2706-155 2706-156 2706-157 2706-158 2706-159 2706-160 2706-161 2706-162 85 55 40 30 25 20 20 15 15 15 15

Terminal strip with operating levers and jumper slot, gray 2 3 4 5 6 7 8 9 10 11 12 2706-252 2706-253 2706-254 2706-255 2706-256 2706-257 2706-258 2706-259 2706-260 2706-261 2706-262 70 45 30 25 20 15 15 10 10 10 10

Item no. suffixes for colored terminal strips: (Production and prices depend on quantity required) blue light gray green-yellow light green . . . - . . . /000-006 . . . - . . . /000-009 . . . - . . . /000-016 . . . - . . . /000-017 Ordering example: Terminal strip with operating levers and jumper slot, 10 mm pin spacing 8-pole, light gray: 2706-358/000-009


4,5 ___>

1 >< ( 12,5 ) ( 9,5)

110

1

PCB Terminal Strips with Operating Levers 16 mm2 Pin Spacing 10 mm, 15 mm 2716 Series

High-current terminal strips with lever-actuated CAGE CLAMP Tool-free opening and closing - fingers open/close levers Several clamping units can be held open simultaneously convenient for terminating multi-core cables Four solder pins per contact point for high mechanical stability 600 V UL for 15 mm pin spacing Pin and dimensions compatible to high-current, screw-type terminal blocks

Technical data: Pin Spacing Rating per Overvoltage category Pollution degree Rated voltage Rated surge voltage Nominal current Approvals per Use group UL 1059 Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology Conductor size: solid Conductor size: fine-stranded Conductor size: fine-stranded Conductor size: fine-stranded AWG Strip length Conductor entry angle Solder pin: length/width Solder pin: drilled hole diameter Material data: Material group Insulating material Flammability rating per UL 94 Lower/Upper temperature limit Clamping spring material Contact material Contact plating I Nylon 6.6 (PA 6.6) V0 60C / +105C Chrome-nickel spring steel (CrNi) Electrolytic copper (ECu) tin-plated CAGE CLAMP 1.5 16 mm2 1.5 16 mm2 1.5 10 mm2 (with insulated ferrule) (with uninsulated ferrule) 1.5 10 mm2 16 6 12 13 mm / 0.47 0.51 in 30 to PCB 4.5 mm / 0.95 x 1.2 mm 1.6+0.1 mm 10 mm 0.394 in IEC/EN 60664-1 III III II 3 2 2 320 V 320 V 630 V 4 kV 4 kV 4 kV 76 A 76 A 76 A UL/CSA B C D 300 V 150 V 300 V 55 A 55 A 10 A 15 mm 0.591 in IEC/EN 60664-1 III III II 3 2 2 800 V 1000 V 1000 V 8 kV 8 kV 8 kV 76 A 76 A 76 A UL/CSA B C D 600 V 600 V 65 A 65 A Current-Carrying Capacity Curve Pin spacing: 10 mm / Conductor size: 16 mm2 f-st Based on: EN 60512-5-2 / Reduction factor: 1Current in A

80 60 40 20 0

10

20

30

40

50

60

70

80

90 100 105


2-, 4-, 6-, 12-pole


2716 Series accessories: Marking accessories Test plugs

Page: 540 543 538



PCB Terminal Strips with Operating Levers 16 mm2

"1

111



1

pechatnaya plata i shtekkery 2012-2013

Documents

series thr

mm2awg2820 page

mm2awg2416 page

mm2awg2016 page

mm2 awg2016 page

mm2 awg2420 page

mm2awg2814 page

mm2awg2418 page