pds rd265cf

8/12/2019 Pds Rd265cf

1/3

Polypropylene RD265CF

Borouge Pte Ltd 1 George Street l #18-01 l Singapore 049145

Tel +65 6275 4100 l Fax +65 6377 1233 lwww.borouge.com

Borouge is part of the ADNOC and Borealis group of companies

Provisional Product Data Sheet

PolypropyleneRD265CF

DESCRIPTIONRD265CF is a random copolymerPolypropylene gradeproduced by the proprietaryBorstarprocess.

This grade is designed for Aluminum metalized cast film (MCPP) application.

RD265CF contains antiblocking additive only and stearate free.

APPLICATIONSMetallisable cast film

SPECIAL FEATURESGood optics (low haze and high gloss) Easy processabilityGood Aluminum adhesiveness Good corona treatment retentionHigher heat resistance

PHYSICAL PROPERTIESProperty Typical Value Test Method

Data should not be used for specification work

----------------------------------------------------------------------------------------------------------------------------- -Density 900-910 kg/m

3 ISO 1183

Melt Flow Rate (230 C/2.16 kg) 8 g/10min ISO 1133Flexural Modulus

1 1200 MPa ISO 178

Melting Temperature (DSC) 148 - 154C ISO 3146Vicat softening temperature A50, (10 N)

1 139

oC ISO 306

1Measured on injection moulded specimens, conditioned at 23oC and 50% relative humidity

PROCESSING GUIDELINES

The actual conditions will depend on the type of equipment used.

Specific recommendations for processing conditions can be determined only when the applicationand type of equipment are known. Please contact your local Borouge representative for suchparticulars

8/12/2019 Pds Rd265cf

2/3





FILM PROPERTIES 1Property Typical Value Test Method

Data should not be used for specification work

----------------------------------------------------------------------------------------------------------------------------- -

Haze 120 ASTM D 2457Tensile Strain at Break MD/TD 400550% ISO 527-3Tensile Strength MD 40-50 MPa ISO 527-3Tensile Strength TD 25-40 MPa ISO 527-3Tensile Modulus MD 1100 MPa ASTM D 882Tensile Modulus TD 1000 MPa ASTM D 882

1Specific film values evaluated on chill roll films produced with Borouge internal standard conditions with a thickness of 30

m. When compared to films which are produced under other conditions, it should be taken into account that the filmproperties are strongly dependent on the processing conditions.

STORAGERD265CF should be stored in dry conditions at temperatures below 50C and protected from UV-light. Improper storage can initiate degradation, which results in odour generation and colourchanges and can have negative effects on the physical properties of this product.

More information on storage can be found in Safety Information Sheet for this product.

SAFETYThe product is not classified as a hazardous mixture.

Please see our Safety Data Sheet / Safety information sheet for details on various aspects ofsafety, recovery and disposal of the product. For more information, contact your Borougerepresentative.

RECYCLINGThe product is suitable for recycling using modern methods of shredding and cleaning. In-houseproduction waste should be kept clean to facilitate direct recycling.

8/12/2019 Pds Rd265cf

3/3





RELATED DOCUMENTSThe following related documents are available on request, and represent various aspects on theusability, safety, recovery and disposal of the product.

Safety Information SheetStatement on chemicals, regulations and standardsStatement on compliance to food contact regulations

DISCLAIMER

The product(s) mentioned herein are not intended to be used for medical, pharmaceutical orhealthcare applications and we do not support their use for such applications.

To the best of our knowledge, the information contained herein is accurate and reliable as of the date ofpublication, however we do not assume any liability whatsoever for the accuracy and completeness of suchinformation.

Borouge makes no warranties which extend beyond the description contained herein. Nothing hereinshall constitute any warranty of merchantability or fitness for a particular purpose.

It is the customer's responsibility to inspect and test our products in order to satisfy itself as to thesuitability of the products for the customer's particular purpose. The customer is responsible for theappropriate, safe and legal use, processing and handling of our products.

No liability can be accepted in respect of the use of Borouge products in conjunction with other materials. Theinformation contained herein relates exclusively to our products when not used in conjunction with any thirdparty materials.

Jan - 2011

pds rd265cf

Documents