part 1: course summary information...or foundation degree may be considered for year 2 entry. for...

of 23

s

PROGRAMME SPECIFICATION Quantity Surveying 2019

PART 1: COURSE SUMMARY INFORMATION

Course summary

Final award BSc(Hons) Quantity Surveying

Intermediate award BSc Building Studies

Intermediate award Dip HE Building Studies

Intermediate award Cert HE Building Studies

Course status Validated

Awarding body University of Brighton

School Environment and Technology

Location of study/ campus Moulsecoomb

Partner institution(s)

Name of institution Host department Course status

1. SELECT

2.

3.

Admissions

Admissions agency UCAS

of 23

Entry requirements

Include any progression opportunities into the course.

Check the University’s website for current entry requirements.

A-levels or BTEC

Entry requirements are in the range of A-level BBC–CCC (112–96

UCAS Tariff points), or BTEC Extended Diploma DMM–MMM. Our

conditional offers typically fall within this range.

We will generally make you an offer if your predicted grades are at

the top of this range. If your predicted grades are towards the lower

end of this range we may still make you an offer if you have a good

GCSE (or equivalent) profile or relevant non–academic

achievements.

GCSE (minimum grade C or grade 4)

At least English language, maths and science.

International Baccalaureate

28 points, with three subjects at Higher level.

Access to HE Diploma

Pass with 60 credits overall. At least 45 credits at level 3, with 24

credits at merit or above.

Foundation degree/HND

International foundation may be considered. Applicants with an HND

or foundation degree may be considered for year 2 entry.

For non-native speakers of English

IELTS 6.0 overall, with 6.0 in writing and a minimum of 5.5 in the

other elements.

Studying part-time

Part-time students should apply direct to the university.

Applicants with non-standard qualifications should contact the School office at [email protected].

Start date (mmm-yy)

Normally September

September 2019

Mode of study

Mode of study Duration of study (standard)

Maximum registration period

Full-time 3 years 8 years

Part-time Other: 6 years 8

Sandwich 4 years 10

Distance Select Select

Course codes/categories

UCAS code K240

Contacts

Course Leader (or Course Development Leader)

Noel Painting

https://www.brighton.ac.uk/studying-here/applying-to-brighton/undergraduate/apply-direct-to-the-university/index.aspx

mailto:[email protected]

of 23

Admissions Tutor Dr. Hannah Wood / Della Madgwick

Examination and Assessment

External Examiner(s)

Name Place of work Date tenure expires

Dr Solomon Adjei

Birmingham City University

30 September 2023

Examination Board(s) (AEB/CEB)

Built Environment and Civil Engineering

Approval and review

Approval date Review date

Validation February 2018 February 2023

Programme Specification February 2019 January 2020

Professional, Statutory and Regulatory Body 1 (if applicable):



of 23

PART 2: COURSE DETAILS

AIMS AND LEARNING OUTCOMES

Aims

The aims of the programme are:

The principal aim of the course is to educate and nurture the intellectual abilities and capabilities of students, through the scientific, managerial and technological study of construction projects in preparation for professional careers in Quantity Surveying. Arising from the principal aim is a range of subsidiary aims and objectives which are covered below grouped as ‘Educational aims’ and ‘Professional objectives’.

Educational Aims

The educational aims of the course include:

1. To offer attractive scientific programmes of study in the built environment disciplines

2. To produce a learning environment in which students are encouraged to be active participators in the acquisition and application of knowledge

3. To develop student’s awareness of scientific, managerial and technological approaches to the natural and construction environment

4. To nurture graduates to become highly adaptable to the changing demands of commercial, industrial and professional life, by allowing them to develop a wide range of personal and professional skills.

5. To provide an appropriate training in science, technology, management and professional skills which will allow graduates from the course to compete successfully for positions in research, education, industry and the professions.

6. To develop students’ abilities to analyse, model and develop systems

Learning outcomes

Knowledge and theory Students should be able to:

1. Demonstrate understanding and knowledge of construction technology including fundamental building services, leading to a complete understanding of how building projects are constructed.

2. Apply the principles of Project Administration relevant to Quantity Surveying including taking off and bill preparation.

3. Demonstrate understanding and knowledge of the role of the commercial manager in construction projects and the Quantity Surveyor in society

4. Demonstrate the use of information technology and systems relevant to the modern Quantity Surveyor’s role.

Skills

Includes intellectual skills (i.e. generic skills relating to academic study, problem solving, evaluation, research etc.) and professional/ practical skills.

Intellectual Skills On successful completion of the course the graduate should be able to:

1. develop a reasoned and critical argument through the integration and interpretation of primary and secondary materials;

2. develop methodologies for appraising project requirements and develop solutions for defects in buildings and evaluate the feasibility of change of use.

3. apply the skills of problem analysis; the preparation and presentation of solutions, and the defence of these within their peer group and invited external evaluators

of 23

4. develop the ability to work with peers and to contribute to group activities;

5. expand the student’s knowledge base through individual research and reading and contribute this to the knowledge pool of the cohort.

6. generate research questions and identify and use appropriate methods in reaching and reporting conclusions ;

7. critically evaluate evidence, ideas and theoretical standpoints within a breadth of quantity surveying contexts;

8. undertake a deeper approach to learning and understanding; 9. understand the constructed and dynamic nature of knowledge.

Discipline-specific skills On successful completion of the course the graduate should be able to:

1. Quantify and measure structures 2. Provide appropriate advice to different construction clients in

meeting project and business objectives 3. Utilise appropriate techniques in contract risk, value and cost

financial management throughout all stages of the construction project.

4. Give technical and financial presentations 5. Use computational tools and packages 6. Identify built environment problems or issues, to investigate them

through appropriately planned, designed and implemented research projects, and to present the findings as project report using reasoned argument to draw clear conclusions.

7. Work effectively as part of a team. 8. Select and use effectively the necessary range of numerical methods

for calculating and checking solutions to problems. Transferable skills On successful completion of the course the graduate should be able to:

1. communicate ideas and arguments effectively in writing, verbally, and graphically;

2. collect, record, analyse and present data of various forms using appropriate analytical techniques;

3. learn and study independently, to take responsibility for the management of independent investigation and learning, and to plan time effectively;

4. apply mathematical skills 5. manage resources of time and money 6. balance risks when decision making. 7. work and communicate effectively as part of a team; 8. demonstrate competence in the use of appropriate IT packages to

find, explore, develop and present numbers, text and images; 9. use appropriate techniques for job-seeking and information

acquisition for life-long learning; 10. appreciate the broader environmental and academic contexts of their

learning.

QAA subject benchmark statement (where applicable)1

This subject benchmark statement refers to bachelor's degrees with honours in 'Land, Construction, Real Estate and Surveying'.

This version of the Statement forms (2016) forms its third edition, following initial publication in 2008 and review and revision in 2002. The review process was overseen by the Quality Assurance Agency for Higher Education (QAA) as part of a periodic review process of all subject benchmark previously published.

1 Please refer to the QAA website for details.

of 23

Benchmark statement. 'Land, Construction, Real Estate and Surveying' Provide an appreciation of the impact of changing social, political, economic (including financial), legal, cultural, environmental, technological, business and political frameworks on the built and natural environment. This covers a broad range of topics, including:

• Measurement both quantitative and qualitative of land (including measures of area, volume, cost, value, worth, natural resource, energy etc)

• Law - case law and secondary legislation • cost and value management theory • Design – considerations including functionality and aesthetics,

surveys and inspection. • Construction technology – including the design, build, demolition,

recycling and re-use of buildings; including building services / performance and Information Management & Modelling

• Management including the management of construction and refurbishment, principles of business management and marketing

• Sustainability – climate change, ethical behaviour protect and promote quality of life / resources

• Ethics, the public interest and professional standards – reflect and support Professional Bodies

Programmes in 'Land, Construction, Real Estate and Surveying are multidisciplinary, with a substantive area of specialist or technical knowledge associated with the award title and its specified learning outcomes, which may include a broad preparation for initial employment. Common specialisms are described below.

• Construction Management [K220]: management of the production and assembly of buildings and other infrastructure.

• Building surveying [K230]: the maintenance, adaptation and repair of buildings.

• Quantity surveying [K240]: cost and value management of the project management for construction’s remit.

• Property development [K251]: site analysis, planning, management and development.

• Engineering services [H242]: design and coordination of mechanical and electronic building services, including the management of energy and carbon emissions.

• Project management (Construction) [K251] [N213]: to plan and schedule people, equipment and materials in construction project management to ensure projects are coordinated and delivered on time.

The curricula should is underpinned by numeracy and literacy; business awareness; and information and communication technologies (ICT) competence.

PROFESSIONAL, STATUTORY AND REGULATORY BODIES (where applicable)

Seeking accreditation from RICS, CIOB and CABE

of 23

LEARNING AND TEACHING

Learning and teaching methods

Introduction

Students typically take the equivalent of 6 modules per year. A module is designed to comprise 200 hours total learning time and is typically studied over a 15 week semester. A typical 20 credit module comprises a combination of tutor-led contact sessions and guided independent study (including time spent in preparing and completing assessment tasks). A broad range of teaching methods is employed to meet the intellectual, academic and professional objectives of the course whilst ensuring a diverse need of students. These include lectures, tutorials, seminars, case studies, laboratory classes and practical classes, fieldwork, flipped learning, student-centred IT projects, workshops, computer modelling/simulation, practical classes and both individual and group project work. In addition, the multifaceted aspects of the application of construction management and technology, information technology and computing form a continuing theme throughout the course.

The general learning approach in the common first year is for individual students to be encouraged and supported to achieve their learning potential and develop their confidence through tutor-led learning. The learning progressively becomes student-centred towards the later stages of their course, whereby students are able to operate in complex and unpredictable contexts, requiring selection and application from a range of standard techniques and information sources. Furthermore, a greater choice of modules is available in the final year for the students to enable specialism in their areas of interest.

Key features of our learning and teaching methodology are:

Research-led and Enquiry-led Learning - Research Informed Teaching

Experimental learning is an important, if not a crucial part, ability our students must develop throughout their learning journey. Embedded within our curriculum are the skills needed whereby students can learn from their experience, exploration, self-reflective practice and apply change(s) based on their conclusions.

The construction industry is in a constant dynamic state of flux; with new technologies, plant, labour, materials and environmental factors the need for our future graduates and those leaders in industry to understand, and challenge convention and to create new and innovative methods is crucial for mankind.

Throughout our programmes we use a variety of learnings approaches; Problem-Based Learning (PBL) / case based precedence studies are used to inform and solve, in student groups, a 'live brief' / construction scenario with environmental and legislative constraints, conflict and challenges. These projects present the opportunity for students to develop and rationalise, deliberate their choices and make a proposal. At Level 6, modules use both Problem Based Learning (PBL) experience, and an Enquiry-Based Learning (EBL) approach aimed at stimulating students to follow up interesting lines of enquiry and supports them in concentrating their efforts and further work (Kahn, P. and O’Rourke, K. 2014).

The essence of University education experience is to actively engage our students as part of the ongoing research activities within departments, Schools and the academic community. Sharing aspects of our research and the processes, techniques and action of academics undertaking our research should be designed/embedded in our curriculum to encourage our students to become willing participants in their learning and our research effort. Our research is both taught formally and imparted generally through our teaching and learning taught module programmes, however, we use laboratory / survey / field exercises and modules with experimental learning/activities to introduce students to using and testing equipment with ‘best practice’ protocols building their knowledge and experience to carry out complex and exacting precise science in the future.

Research Informed Teaching

This course is delivered by research-active academic staff, and specialist aspects of the curriculum reflect the research interests of these staff. All final year option modules are taught by staff who are actively engaged in research and publication in their specific topic areas, and who are currently undertaking research or consultancy with leading bodies. This level of integration is particularly true for final year projects, where students spend an extended period of time undertaking research with a subject specialist,

of 23

who is linked into a network of international scholars with shared interests. Throughout the course, students develop competencies enabling them to become independent researchers, with specialist skills sessions scheduled to support their development. Teaching and learning strategies for the course are developed in consultation with the UK’s Built Environment as well as Engineering subject centres, often with support from specialists in pedagogic research, based in the University’s Centre for Learning and Teaching.

Formative Assessment and Feedback

Formative assessments play an important role within the learning and teaching on this course. Students are able to practise their learning through the formative assessments in each module, such as mock exams, online quizzes, weekly tutorial exercises with feedback, facilitated group discussions, etc, which do not count towards the final mark, but provide a safe environment for students to evaluate their strengths and areas of development through feedback received on such assessments.

Staff and Student working in Partnership

Throughout the course, staff and students work together to develop learning activities to suit the diverse need of students. For example students will be invited to choose the relevant software packages to present their work by discussions at student forums. Students’ feedback on the course through module and course evaluations are obtained systematically throughout the course and informs continual curriculum development and enhancement this leads to dynamic teaching methods to best suit the diverse cohorts. This information also assists (at module level) to plan and design learning activities suitable for the cohort needs. Examples of these are within BE415, BE515, BE535 and BE636 whereby facilitated group discussions are used to evaluate the needs of individuals and learning activities and support is provided to fill their knowledge gaps.

Diversity, Inclusivity and Blended Learning:

Consideration of diversity and inclusivity is embedded throughout the curriculum primarily through a range of learning and teaching activities adopted at each Level, practice based learning, and group work (whereby students are provided with safe spaces to share their own interests, backgrounds and opinions). Strong emphasis on formative assessments and coursework helps to cater for the needs of students from diverse backgrounds whilst ensuring transparency and equality. As an example the following modules give scope for these activities: BE415, BE475, BE535 and BE635

Blended learning is another mean to enhance diversity and inclusivity, which is strongly embedded within the courses. All modules within the course are complemented with online digital space and is a mean to engage student peers and staff outside of contact time. Some modules are delivered through flipped learning e.g. BE475, CE412, BE515 and BE635. The blended learning provides flexibility for students to learn at their own pace and a safe environment to share their individualised views with their peers and academic staff

Visiting Lecturers

A number of research and consultancy activities provide both scholarly and direct support for the undergraduate programme. Visiting lecturers contribute to the delivery of modules such as BE415, BE517, BE535, BE635, BE636 – where the understanding and application of professional practice from the providers opportunities and engagement with industry.

Education for Sustainable Development

Addressing issues and striving to improve the Sustainability of the Built Environment has been one of the single greatest challenges facing the construction sector in the 21st Century. Our courses embed Professional ethics, Corporate social responsibility and Sustainability in terms of environmental protection throughout the 'construction / constructability' life-cycle of projects. The University of Brighton is committed to the principles of sustainable development through its Education for Sustainable Development policy. The subject area of Construction provides a useful platform from which to examine the issues associated with sustainable development. BSc (Hons) Quantity Surveying students are trained to identify and analyse current and future problems, and to critically examine the prospects for achieving a just and environmentally sound future for all. By incorporating elements of physical, natural and social sustainability along with economics. Quantity Surveying provide a framework that enables understanding, assessment of and intervention in the economic development of construction, whilst at the same time, critically examining the prospects for

of 23

and effects of intervention. Graduates from all courses in the Built Environment are thus equipped to make a significant contribution to ensuring that future generations not only have an equivalent quality of life, but are likely to have an improved one. Sustainability is one of the core values of the University Strategy and as such features significantly within our BE course curriculum, both in design and activities undertaken by our student body. Whilst renewable technologies, reduction, re-use, recycling, play their part; Construction still accounts for one of the greatest consumers of raw materials within the UK. Our curriculum provide opportunities for students to interrogate ethical, socio and economic values and concerns using ‘real-life’ scenarios and project about the implications of creating a more resilient and sustainable development construction strategy for the future including the economic implications.

Employability Skills:

Preparing students for professional life and the associated skills are an important feature of this course. These skills relate to the University of Brighton Graduate Toolkit and are embedded throughout the curriculum in various module that are mapped for each module in the Module Briefs, which are available to students through studentcentral (University of Brighton Virtual Learning Environment). Many of these skills are gained through integrated design projects at each Level of the course. The integration between taught subjects (through the integrated design modules) and practice places additional demands on the students, such as management, communication, analysis and synthesis of problems, information retrieval and design of appropriate solutions. As an example the following modules give scope for these activities: BE415 Introduction to the Built Environment, and core Quantity Surveying modules BE557 and BE659.

Module Specifications

Each module specification includes the learning and teaching strategy for that module. The strategy for each module is designed by the module team with due regards to the needs of the student and then presented and justified to the 'Area’. Each student's programme thus possesses a corporate learning and teaching approach that arises from the composition of the individual module strategies. The learning and teaching strategy for each module is reviewed and revised where necessary through a process of module review following each completion of delivery. Revisions are undertaken in response to student performance, student views, external examiners' advice and dissemination of educational research, innovative development and industrial and professional evolution.

Lectures, Tutorials and Case Studies

Formal lectures provide the essence of the required body of knowledge and to guide the students in their personal study. The lecture material is reinforced through the tutorial system in which the students are given problems to solve which address all the various aspects of theory and its application to the design process. Case study material is used across all subject disciplines to highlight particular aspects of civil engineering theory, practice, design and construction. Much of the case study material is drawn from lecturers' previous experiences in professional practice and their current activities in research and consultancy.

Laboratories

The School has well-established laboratories in which the students are given practical experience in carrying out directed fundamental experimental work to test the tenets of engineering science. In addition, students are required to undertake open-ended experimental work in which the objectives, but not the methodology, are specified, thereby encouraging personal development of the skills specified in the intellectual objectives.

Field Courses

Fieldwork forms an integral part of the modules BE475: Land & Construction Surveying Practice and BE415: Introduction to the Built Environment. Many aspects of these subjects can only be realistically taught within the context of a field course. During the field courses, academic staff are able to teach in an environment where they are able to illustrate directly the relevance of taught material and the students thus gain valuable practical experience; provide students with an opportunity to work on real life construction projects via the practical construction activity week to develop a practical understanding. Generally, learning and teaching methods at Level 5 are designed to encourage greater analytical and applied skills and thereby making greater use of case study and workplace investigations, student-led seminars, and reflective participation in workshops.

of 23

Coursework

Many modules throughout the course have significant coursework content. The inclusion of such items as design appraisals, open-ended laboratory investigations, essays, presentations and technical reports brings variety and added relevance to the teaching of civil engineering. Well-designed coursework also promotes student involvement and enthusiasm whilst enabling the student to develop investigative and organisational capabilities.

Design Weeks/Projects Activities

The concept of devoting a period of dedicated time to an extended survey and construction cost planning motivates students and enables them to gain direct experience of the estimating process whilst working in small groups. These activities are carried out in special design weeks that form a part of the Core disciplinary Module(s) BE557 and BE659. Integration of various modules is enhanced through design group projects at each Level of study so that students can practise inter-disciplinary work and enhance their practical skills, independence and confidence.

Computing

This has been an area of rapid development in education as well as in many areas of the construction industry. The speed and convenience of computer software can be used to enhance and expand the understanding of fundamentals whilst also providing a medium for improving methods of design and analysis. Commercial and academic software is now used within all subject disciplines.

Student use of word processors, spreadsheets and electronic sources of information (such as networked databases and the Internet) is encouraged as their use enables them to improve their organisational and presentational skills. Open access to this software is available for students in a variety of locations throughout the University.

All Built Environment students are required to undertake the BE575 Building Information Modelling module at Level 5 of their studies. This module aims to equip students with the necessary skills in computer programming and data management and modelling skills and understanding in order to simulations common design and construction scenarios and applications to professional practice – producing 2D as and 3D solutions.

Individual Projects

All final year students are required to undertake the BE695: Honours Project module. This is equivalent to a 40-credit module, taken over two semesters, with an average allocation of 13 hours equivalent study per week. This is a substantially independent research project negotiated, designed and completed in collaboration with an academic tutor.

These projects give students a choice of subject matter. The form of study always includes a literature search and acquisition of in-depth knowledge of a specialist subject area. The study must then be extended by some combination of field studies, experimental work, computer-aided engineering, design and evaluation of practical information or theoretical developments. The culmination of the study is the preparation and submission of a formal project report detailing all aspects of the work undertaken and an oral examination of the work.

ASSESSMENT

Assessment methods

The assessment scheme is seen as an integral part of the system of teaching and learning strategies for the course. As such, its aims are to foster, develop and test knowledge, skill, understanding and personal qualities as they may apply in the context of an engineering degree. To this end, a range of techniques is employed throughout the course which may be broadly categorised as continuous or periodic.

The BE programmes provide opportunities to choose tasks from an appropriate field of different but equivalent assessment task/types; either formative and/or summative, at least once during each level of study. Offered in both core modules and optional modules this measure is designed to increase

of 23

opportunities for assessment optionality, where appropriate. Modules including/offering this opportunity within their assessment regime have been highlighted in the Programme Specification. For Quantity Surveying, these modules are: BE415, BE535, BE616, BE635; further details can be found in the Module Descriptor under the Assessment tasks section. This system provides opportunities for Inclusive assessment practice; providing choice for assessment to students.

A variety of forms of assessment are used across the three levels of the degree programme to demonstrate ability in a range of skills. The following definitions are included within the Built Environment & Civil Engineering Division Student Handbook issued to all students:

Examination/Test (including open book, seen and unseen examinations): a demonstration of knowledge, understanding, analytical skill and ability to apply knowledge.

Essay: a demonstration of understanding and analytical and written communication skills.

Project (including individual, group work and Level 6 project): a demonstration of independent research skills and written communication skills.

Report (including laboratory reports and field reports): a demonstration of reporting and written communication skills. Laboratory reports additionally demonstrate laboratory skills whilst field reports demonstrate field and group research skills.

Seminar presentation: a demonstration of knowledge, understanding, verbal communication, presentation skills, and ability to respond to questioning.

Debate: a demonstration of knowledge, understanding, verbal communication, and ability develop arguments in response to expressed views.

Presentations / Poster presentation: a demonstration of knowledge, understanding, and written and visual communication skills.

Portfolio (including article reviews): a demonstration of reflective engagement in workshop activities, reflective reading skills, and written communication skills.

Other methods (including assessment methods such as mapping and bibliographic writing exercises).

A number of transferable skills, such as self-motivation and communication, team working is embedded within the primary modes of delivery of learning and is not necessarily separately assessed. However, satisfactory achievement of the learning outcomes requires that such skills are developed to an appropriate level.

Levels 4 and 5 Assessment

At Level 4 and Level 5 the curriculum is based around a series of core subjects in engineering. In all subjects, a combination of coursework and/or examination is designed to assess students’ appreciation of fundamental engineering principles and their application. The coursework may be based on laboratory work, literature research or integration of assignments designed to test the abilities of students to organise and work in groups.

Level 6 Assessment

At Level 6 students are required to take modules in core subjects including Design of Structures and Reinforced Concrete Design. In all subjects, a combination of coursework and/or examination is designed to assess students’ appreciation of fundamental engineering principles and their application. The coursework may be based on laboratory work, literature research or integration of assignments designed to test the abilities of students to organise and work in groups.

Assessment criteria

The Standard University of Brighton Criteria for undergraduate programmes are used for assessment and grading. These criteria are included within the Built Environment & Civil Engineering Division Student Handbook issued to all students electronically. Where criteria for specific items of assessment differ from these requirements, full details are published within the module hand-outs issued to students.

of 23

Learning Outcome Assessment

method

Module Number

of credits

Knowledge and Theory

Demonstrate understanding of construction technology including building services, which leads to a complete understanding of how building projects are constructed.

Examination ~

coursework, portfolio,

laboratory report,

fieldwork reports,

presentation, Final

year dissertation

BE415, BE435,

CE412, BE436,

BE535, BE536,

BE557, BE659,

BE616, BE695,

BE636

260

Apply the principles of management,

construction business analysis, project

administration and quantity surveying

including taking-off and bill preparation.

Examination,

coursework-

portfolio, fieldwork

report, presentation.

BE516, BE517,

BE557, BE659,

BE515, BE575

120

Review construction economics and the law

as it relates to the construction industry.

Examination,

coursework-



BE415, BE535,

BE557, BE659,

BE655

120

Use information technology and systems relevant to the modern Quantity Surveyor and understand their role in society

Examination,

coursework-

presentation.

BE475, BE516,

BE659 80

Intellectual Skills

develop a reasoned and critical argument

through the integration and interpretation of

primary and secondary materials;

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation

BE435, CE412,

BE535, BE557,

BE656, BE695,

BE635, BE636

200

develop methodologies for appraising project

requirements and to develop solutions for

defects in buildings and evaluate the

feasibility of change of use.

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

BE535, BE557,

BE655, BE695,

BE675

80

apply the skills of problem analysis; the

preparation and presentation of solutions,

and the defence of these within their peer

group and invited external evaluators

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

CE412,

BE535, BE557

BE695, BE659

BE675

120

develop the ability to work with peers and to

contribute to group activities;

Examination,

coursework-



BE435, CE412,

BE535, BE557,

BE659

120

of 23

expand the student’s knowledge base

through individual research and reading and

contribute this to the knowledge pool of the

cohort.

Examination,

coursework-



BE535, BE557,

BE635, BE655,

BE659, BE695

140

generate research questions and identify and

use appropriate methods in reaching and

reporting conclusions;

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

BE535, BE557,

BE659, BE695,

BE655

100

critically evaluate evidence, ideas and

theoretical standpoints within a breadth of

building surveying contexts;

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

BE535, BE557,

BE659, BE695,

BE635, BE616 BE675

140

undertake a deeper approach to learning and

understanding;

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

BE435, BE557,

BE659, BE695 100

understand the constructed and dynamic

nature of knowledge.

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

BE535, BE557,

BE659, BE695,

BE635

120

Discipline-specific skills

Quantify and measure structures

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

BE435, BE436,

CE412, BE535,

BE536, BE557,

BE557, BE659,

BE616, BE655,

BE636

260

Provide appropriate advice to different

construction clients in meeting project and

business objectives.

Examination ~


fieldwork reports,

presentation, Final

year dissertation.

BE435, BE436,

BE415, BE535,

BE536, BE557,

BE659, BE616,

BE695, BE675

220

Utilise appropriate techniques in contract risk,

value and cost financial management

throughout all stages of a construction

contract.

Coursework ~


reports, presentation.

BE435, BE415,

CE412, BE535,

BE536, BE557,

BE659, BE616,

BE635, BE575

220

of 23

Give financial and technical presentations

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

BE415,

CE412, BE475,

BE517 BE535,

BE536, BE557,

BE659, BE616,

180

Identify built environment problems or issues

and investigate them appropriately through

planned research to present findings using

reasoned arguments to draw clear

conclusions.

.

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

CE412, BE557,

BE659, BE695 100

Work effectively as part of a team

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

BE435, BE415,

BE535, BE659,

BE616, BE695,

BE655

180

Select and use effectively the necessary

range of numerical methods for calculating

and checking solutions to problems.

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

BE415, CE412,

BE436, BE535,

BE557, BE659,

BE616, BE695,

BE635, BE636,

GY636

220

Transferable skills

communicate ideas and arguments effectively

in writing, verbally, and graphically;

Examination ~


laboratory report,

fieldwork reports,

presentation,

BE435, BE436,

BE535, BE557,

BE575, BE656,

BE616, BE636,

GY636, BE655,

200

collect, record, analyse and present data of

various forms using appropriate analytical

techniques;

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

BE415, CE412,

BE475, BE535,

BE536, BE557,

BE656, BE695,

BE655, BE636

220

learn and study independently, to take

responsibility for the management of

independent investigation and learning, and

to plan time effectively;

Examination ~


laboratory report,

fieldwork reports,

presentation, Final

year dissertation.

BE415, BE535,

BE436, BE557,

BE656, BE695,

BE655, BE636,

BE675

180

work and communicate effectively as part of a

team;

Coursework,

portfolio, laboratory

report, fieldwork

reports, presentation.

BE415, BE475,

BE535, BE557,

BE656, BE655,

BE675

120

of 23

demonstrate competence in the use of

appropriate IT packages to find, explore,

develop and present numbers, text and

images;

Coursework,


reports, poster

presentations, verbal

presentation.

BE415, BE475,

BE535, BE557,

BE557, BE659,

BE655, BE675

140

use appropriate techniques for job-seeking

and information acquisition for life-long

learning;

Coursework,


reports, poster


presentation.

BE415, BE436,

BE535, BE536,

BE557, BE659,

BE695, BE636,

BE675

180

Appreciate the broader environmental and

academic contexts of their learning.

Coursework,


reports, poster


presentation.

BE415, BE535,

BE517 BE536,

BE557, BE656,

BE616, BE695,

BE655, BE636

220

SUPPORT AND INFORMATION

Institutional/ University

All students benefit from:

University Welcome Week

The University of Brighton Student Contract:

https://www.brighton.ac.uk/studying-here/student-contract.aspx

Extensive library facilities, which include:

Extended opening hours (until 2am each day during the

Autumn term and 24 hours during Spring and Summer

terms)

Help Desk - enquiries, IT support

Information Adviser, Joyce Storey and Edward Boyden Assistant

Information Adviser who support the School

The Online Library web portal providing access to thousands of

full text electronic journals, databases and e-books which are

accessible 24/7

Resource discovery tools - OneSearch, library catalogue

Individual study spaces, equipped with network points for

personal laptops, and bookable group study rooms

Wireless access throughout the whole library

Open access PCs, Loanable laptops, colour and black and white

networked printing, scanning and photocopying facilities

High-specification PCs providing access to more specialised

software

PC Booking System

Computer pool rooms (including workstations and network points for personal PCs in the Aldrich library). All are linked to the University network and SuperJANET services and have daily user support help desk.

Email, file storage, studentcentral (virtual learning environment), UniCard and free access to Microsoft Office 365 for the duration of studies

https://www.brighton.ac.uk/studying-here/student-contract.aspx

of 23

Student Services, which includes:

Chaplaincy

Childcare facilities

Counselling service

Disability and Dyslexia Team

Student Advice Service (finance, immigration, international

student support)

Student Support and Guidance Tutor

A service that provides confidential and non-judgmental support

and advice to students across a range of academic, personal,

financial and other issues. Provides direct support through

informal drop in sessions and one-to-one meetings and guidance

on accessing further help

Personal Academic Tutor

Accommodation Office

Careers Service (including Graduate Toolkit, Active Student volunteering,

Work Placements)

Student Charter (relationship between the university, the students union and students)

Course-specific

Additional support, specifically where courses have non-traditional patterns of delivery (e.g. distance learning and work-based learning) include:

In addition, students on this course benefit from:

Handbooks and Guidance Notes

Built Environment and Civil Engineering Division Skills Handbook

Project Handbook (BE695) (including guidance on research ethics)

Guidance Notes for Fieldwork and Laboratory Safety

Placement Guidelines

Academic and Administrative Support

Course Leader who monitors academic and personal progress of

students on the course

Personal Tutors for personal and academic support

Studentcentral that hosts supplementary learning resources in support

of modules as well as providing links to additional resources

School administrative support for module registration

Built Environment and Civil Engineering Division Placement Support

officers

Students on Placement during their Sandwich year receive several

planned visits from a designated Placement Tutor to support learning

and progress in the workplace

Information Adviser who works with staff and students to facilitate

access to learning resources available through the Online Library and

in Aldrich Library.

Learning Technology Adviser who works with staff and students to

enable access to, and use of, Information Technology facilities

Specialist Facilities

of 23

Extensive range of Surveying equipment including automatic levels, total stations, dGPS and environmental monitoring equipment.

Computing and Laboratory Facilities

School of Environment and Technology Computer Suites containing 165 networked terminals running software suite for structural analysis and design (SAP2000), rock mechanics (including the programs: Phase2, Dips, Unwedge, Rocfall, Rockplane, Slide, Swedge, Rocksupport, Rocdata, Examine2d), CRISP (FE analysis), GIS (ArcView 3.2) and other software (Matlab, AutoCad, Power Project, Oasis, Hevacomp, Pertmaster, Adobe Photoshop CS2 9, Dreamweaver, Microsoft Office, Rhino SP4, Solidworks).

Concrete Laboratory with curing and testing facilities

Geotechnical Laboratory with drying ovens, sediment sieving facilities, top pan balances, tri-axial testing and shear box equipment, ring sheer apparatus and a dedicated creep laboratory.

Geotechnical Centrifuge for simulating ground changes through time.

Materials Testing Laboratory that includes three hydraulically powered actuators capable of delivering loads in both compression and tension up to 200kN.

Structural Dynamics Laboratory which includes shakers, model hammer acquisition systems and a 0.5 x 0.5 m shake table.

A drawing studio with 50 drawing tables

A modelling laboratory for the preparation of scale models.

Environment & Public Health Laboratory, seating up to 10, equipped with bench top spectrophotometers for basic water chemistry, membrane filtration equipment, balances, incubators, centrifuge, UV cabinet and sterilisation equipment for public health microbiology procedures

Dedicated Geology Laboratories, with 3 Nikon research-quality petrological microscopes (1 with Nikon SLR camera, 2 with Nikon video camera attachments and monitors), 38 petrological teaching microscopes, extensive rock and fossil samples, extensive teaching thin-section collection, and 4 computer terminals,

Hydraulics Laboratories, with 16m x 0.5m wave flume, Armfield 10m x 0.4m recirculating wave flume, Gunt 10m x 0.4m sediment flume, Armfield 5m x 0.3m flume and two Gunt 2.5m x 0.1m narrow flumes with plate weirs

PART 3: COURSE SPECIFIC REGULATIONS

COURSE STRUCTURE

The full time course is studied over 3 years of 31 weeks per year. The academic year is divided into two semesters, of fifteen or sixteen weeks. An optional Sandwich year (normally 48 weeks of study) may be undertaken between Levels 5 and 6 (Years 2 and 3 for full time study). Study is undertaken at Levels 4, 5 and 6 of the national qualifications framework, and is divided into modules. The standard value of a module is 20 credits (equivalent to 200 hours learning) and the structure allows the use of multiples of this (for example the Level 6 individual project module is awarded 40 credits/400 hours). Full-time students study for 120 credits (6 module equivalents) each year, beginning at Level 4 and progressing through Levels 5 and 6. A student must obtain 120 credits at each level before progressing to the next Level.

The Course conforms to the University's modular framework. Students may graduate after three years of full-time study or its equivalent in other modes of attendance. Intermediate exit points exist at certificate

of 23

level (equivalent to one year of full-time study), and diploma level (two years full-time study). A supervised work experience may be undertaken during a placement year in industry leading to an award 'in the sandwich mode'

The aims of each Level are as follows:

Cert HE will:

Provide students with a balanced programme of study spanning topics of design, construction and environmental factors affecting the built environment;

Provide students with a sound understanding of core concepts across the breadth of the subject;

Introduce students to a range of geographical skills including fieldwork, laboratory and IT, together with transferable skills including oral and written communication, teamwork, interpretation and analysis of qualitative and quantitative data, critical analysis and problem-solving;

Provide an opportunity for students to develop additional skills in areas such as languages, science and environmental studies.

Dip HE will additionally:

Allow students to develop a deeper knowledge and understanding of concepts and principles in chosen areas of the discipline;

Introduce students to the critical evaluation and application of core concepts in new contexts;

Provide students with an appreciation of the processes of knowledge generation within the discipline;

Introduce students to the process of research design and implementation in small groups;

Provide students with an opportunity to place their subject-specific and wider learning within the context of employment opportunities and career planning.

BSc Hons will additionally:

Enable students to study advanced aspects of chosen areas of the subject;

Enable students to develop greater independence in their learning;

Provide students with an opportunity to understand and evaluate different approaches to solving contemporary problems in chosen areas of the subject

Require students to design, implement and communicate the results of an independent specialist research study on a topic of their choice.

Programmes Of Study - Programmes of study are divided into Levels Four, Five and Six (equivalent to the years of a traditional full-time Honours Degree) with students being required to study a combination of 20 credit and 40 credit modules up to 120 credits per level. A programme of study for the Honours Degree consists of a set of modules to the value of 360 credits, which meet the requirement as regards content, sequencing and level for the Course. Students should normally complete Level Four within three years of being admitted to the course and Level Six within five years of entering Level Five.

New or revised modules may be included after being validated on an individual basis. The listing of a module as optional/acceptable does not guarantee its availability to an individual student; this will depend on time-tabling logistics and viable class size. All Compulsory Modules will be available to students.

Modes of attendance - The University's standard academic year is divided into two equal semesters. Each module is expected to require six hours of study per week which when combined with a notional 36 hour-week, means that six modules can be studied at any time in the full-time mode. Normally; Part-time students study three modules per year. Completion of three/four modules per year by part-time study offers the expectation of the completion of a degree programme in six years, requiring a reasonably long-term commitment to study. Students wishing to pursue less than six modules per year will be counselled on their expectations. Part-time study may require attendance at the university on more than one day per week The course permits students to study in a mixed mode of attendance. For example, a student may enter as a full-time student and due to personal circumstances, or the requirement to repeat modules, may become part-time for some or all of the remainder of the programme.

Level Four Studies:

120 credits at Level 4 or above

Level Four modules provide students with a thorough grounding in the areas of knowledge fundamental to architectural and construction studies and to develop those personal skills which are essential for their later studies and future careers.

of 23

The basic principles underlying building technology, information technology, construction materials, the built environment professions, law, mathematics and economics are established with the option of language studies.

All modules at this level will be studied with students from other disciplines such Architectural Technology, Building Surveying, Construction Management and Project Management for Construction offering the opportunity for cross-course transfer following successful completion of Level Four.

Level Five Studies:

240 credits including at least 120 credits at Level 5 (including all compulsory modules).

Level Five modules further develop students' analytical, problem solving and communication skills and prepare them for the industrial placement and the final year. The learning methods are similar to those of earlier semesters, although moving significantly towards case-study work.

Modules further develop the students' understanding in the areas of building technology, surveying, and engineering and scientific design and construction of buildings. A particular feature is the development of skills in the modelling, planning, construction information, technology, and control of human and other resources. Other modules further develop understanding of design and construction and continue the study of law and management. All compulsory modules require students to use information technology for data analysis and communication.

The programme contains modules which are I.T. based and designed specifically to introduce students to current industrial practice and for preparing for work experience and further advance studies in the area of CAD

Some modules at this level will be studied with students from other disciplines such as Architectural Technology, Construction Management, Project Management, Building Surveying and Building Studies offering the opportunity for cross-fertilisation which should enrich the experiences of all students.

Level Six Studies:

360 credits including at least 100 credits at Level 6 (including all compulsory modules plus the Honours Project)

Level Six studies are characterised by the analysis, synthesis and optimisation of the whole design process. Many of the modules are delivered through case studies supported by workshops, seminars and individual and group coursework activities.

The wider range of optional modules at Level Six allows each student to take greater control of the direction of the course by studying a greater number of business or environmental or management subjects.

The Honours Project allows each student to pursue a construction-related topic in depth. The topic may be associated with any of the compulsory modules studied on the course, although students are encouraged to pursue their projects in areas akin to the research areas of staff. A student must make a well argued case for approval by the Course Leader if he or she wishes to follow a topic which is not strongly related to the modules on the course.

Classification of the BSc (Hons) award The algorithm for Honours Degree classification includes a total of 240 Credits at Levels Five and Six, and includes all compulsory modules. At least 100 of these 240 must be at Level Six (including the Honours project) The Course Examination Board will use the formulae in Table 2 to calculate the final mark to two decimal places (maximum = 100). A conventional scale is used to relate the final mark to the Honours classification.

of 23

Table 1: Quantity Surveying

Level 4

Sem 1

BE435

Building Technology and Design

BE436

Indoor Environment & Building Services 1

BE475

Land and Construction Surveying

CE412

Construction Materials

Sem 2

BE415

Introduction to

the Built

Environment

Level 5

Sem 1

BE516

Cost & Contract Administration

BE535

Construction Methods & Technology

BE536

Indoor Environment & Building Services 2

BE575

Building Information Modelling

[BIM]

BE557

Quantity Surveying

Sem 2

BE517

Estimating and Quantification of Works

Level 6 (P)

Sem

42 weeks

Optional Placement Year

BE675 Industrial Placement Year (For Sandwich mode)

Level 6

Sem 1

BE695 Dissertation Honours Project (40 credits)

BE616 Construction Risk and Financial Analysis

20 Credits required:

One Optional Module from:

BE655 Building Pathology

and Lifecare.

BE635 Project Planning &

Analysis

GY636 Waste Management and the Circular Economy

Sem 2

BE659

Advanced Quantity Surveying

BE636 Principles of Sustainable Construction

Level

Module code

Status Module title Credit

4 BE415 C Introduction to the Built Environment 20

4 BE435 C Building Technology and Design

40

4 BE436 C Indoor Environment & Building Services 1 20

4 BE475 C Land & Construction Surveying 20

of 23

4 CE412 C Construction Materials 20

5 BE516 C Cost and Contract Administration 20

5 BE517 C Estimating and Quantification of Works 20

5 BE535 C Construction Methods and Technology 20

5 BE536 C Indoor Environment and Building Services 2 20

5 BE557 M Quantity Surveying 20

5 BE575 C Building Information Modelling 20

6 (P) BE675 O Industrial Placement Year 0

6 BE616 C Construction Risk & Financial Analysis 20

6 BE635 O Project Planning and Analysis 20

6 BE636 C Principles of Sustainable Construction 20

6 BE655 O Building Pathology and Life Care 20

6 BE659 M Advanced Quantity Surveying 20

6 BE695 M Honours Project 40

6 GY636 O Waste Management and the Circular Economy 20

Status:

M = Mandatory (modules which must be taken and passed to be eligible for the award)

C = Compulsory (modules which must be taken to be eligible for the award)

O = Optional modules listed are indicative only and may be subject to change, depending on

timetabling and staff availability

A = Additional (modules which must be taken to be eligible for an award accredited by a

professional, statutory or regulatory body, including any non-credit bearing modules)

of 23

AWARD AND CLASSIFICATION

Award type Award* Title Level Eligibility for award Classification of award

Total credits2 Minimum credits3 Ratio of marks4: Class of award

Final BSc (Hons)

Quantity Surveying 6 Total credit 360 Minimum credit at level of award 90

Level 6 and level 5 marks in ratio 75:25

Honours degree

Final BSc (Hons)

Quantity Surveying (Sandwich)

6 Total credit 360 Minimum credit at level of award 90


Honours degree (Sandwich mode)

Intermediate BSc Building Studies 6 Total credit 300 Minimum credit at level of award 60


Degree

Intermediate DipHE Building Studies 5 Total credit 240 Minimum credit at level of award 90

Level 5 marks Not applicable

Intermediate CertHE Building Studies 4 Total credit 120 Minimum credit at level of award 90

Level 4 marks Not applicable

*Foundation degrees only

Progression routes from award:

Award classifications Mark/ band % Foundation degree Honours degree Postgraduate5 degree (excludes PGCE and BM BS)

70% - 100% Distinction First (1) Distinction

60% - 69.99% Merit Upper second (2:1) Merit

50% - 59.99% Pass

Lower second (2:2) Pass

40% - 49.99% Third (3)

2 Total number of credits required to be eligible for the award. 3 Minimum number of credits required, at level of award, to be eligible for the award. 4 Algorithm used to determine the classification of the final award (all marks are credit-weighted). For a Master’s degree, the mark for the final element (e.g, dissertation) must be in the corresponding class of award. 5 Refers to taught provision: PG Cert, PG Dip, Masters.

of 23

EXAMINATION AND ASSESSMENT REGULATIONS

Please refer to the Course Approval and Review Handbook when completing this section.

The examination and assessment regulations for the course should be in accordance with the University’s General Examination and Assessment Regulations for Taught Courses (available from staffcentral or studentcentral).

Specific regulations which materially affect assessment, progression and award on the course

e.g. Where referrals or repeat of modules are not permitted in line with the University’s General Examination and Assessment Regulations for Taught Courses.

In line with the University of Brighton General Examination and Assessment Regulations (GEAR).

Students may be permitted to study up to ONE module, usually other than those which are a normal component of the course, either one Level above or one Level below current Level of study. Students would not be permitted to include a Level 4 module in a Level 6 programme.

Exceptions required by PSRB

These require the approval of the Chair of the Academic Board

part 1: course summary information...or foundation degree may be considered for year 2 entry. for...

Documents