page 1 of 5 test report · 3) test standard: iso 20653-2013 4) test condition: 1. protection test...

of 5

TEST REPORTClient : SHENZHEN GOTRON ELECTRONIC CO.,LTD

Address : 518,5F,R&D building,Tsinghua Hi-Tech Park, Nanshan district, Shenzhen

Sample Name : Mobile Phone

Sample Model : Armor 3T

Brand Name : Ulefone

Sample Quantity : 2PCS

Sample Received Date : Sep.05, 2018

Sample Tested Date : Sep.05, 2018-Sep.11, 2018

Test Standard : ISO 20653-2013

Test Result : IP69K Pass

Tested by

Guanyu Chen( Chen Guanyu) Sep.12, 2018

Reviewed by

KyleXiong(Xiong Zhi) Sep.12, 2018

Approved by

TaylorChen(ChenMeng)Authorized Officer

Sep.12, 2018

Attestation of Global Compliance(Shenzhen) Co., Ltd.

CAUTION:

The test report is effective only with both signature and specialized stamp. The result(s) shown in thisreport refer only to the sample(s) tested. Without written approval of AGC, this report can’t be reproducedexcept in full.

Report No:AGC004367180901SR01Report Version:V1.0

of 5

TEST REPORTTest Item: IPX9K Test

1) Environment Conditions：

Temperature: 26.2℃ Humidity: 54% RH

2) Sample Information:

Sample No. Sample Name Sample Model Sample Quantity Remark

001 Mobile Phone Armor 3T 1PC /

3) Test Standard: ISO 20653-2013

4) Test Condition:

1. Distance between sample and nozzle: 150 mm;

2. Water temperature: 80℃;

3. Water flow: 15 L/min;

4.water pressure: 10000 kPa

5. Turntable speed: 5 r/min;

6. Hydraulic position: 0℃ and 30℃, 60℃ and 90℃;

7. Water spraying time: spray water at each position for 30 s, a total of 120 s.

5) Test Equipment:

Sequence Equipment Name Equipment No. Calibration DateNext Calibration

Date

1Box rain testchamber

IP-XK00-06 Apr. 13 , 2018 Apr. 12 , 2018

6) Test Results:

Sample No. TestResults Description Judgment

001After the test, the sample can be switched on normally, and there is no

water in the sample.Pass


of 5

TEST REPORTSample Photos Before Test:

Sample Photos During Test:

Sample Photos After Test:


of 5

TEST REPORTTest Item: IP6X Test

1) Environment Conditions：

Temperature:23℃ Humidity: 50%RH

2) Sample Information:

Sample No. Sample Name Sample Model Sample Quantity Remark

002 Mobile Phone Armor 3T 1PC /

3) Test Standard: ISO 20653-2013

4) Test Condition:

1. Protection test for dangerous parts:

Use a rigid steel rod (1 mm diameter) push against any openings of the enclosure, the test force is 1N

2. Dust test:

1) The sample is pumped at negative pressure, the volume of air is <40 times the volume of the shell per hour,

the pressure inside the sample shell and the pressure outside the shell are not more than 2KPa

2) The amount of talcum powder: 2kg/m3

3) The size of talcum powder: The talcum powder used shall be able to pass through a square-meshed sieve the

nominal wire diameter of which is 50 micron and the nominal width of a gap between wires 75 micron

4) Test duration: 8H

5) Test Equipment:

SequenceEquipmentName

Serial No.EquipmentModel

Calibration DateNext

Calibration Date

1 Dust Tester AGC-RE-E018 KXT1410 Jul.27, 2018 Jul.26, 2019

6) Test Results:

Sample No. TestResults Description Judgment

002After testing, the sample can be switched on normally, and no dust is detected

inside the sample.Pass


of 5

TEST REPORTSample Photos Before Test:

Sample Photos During Test：

Sample Photos After Test：

*** End of Report ***

Testing laboratory address：1F., Building C West,Qinyu Industrial Park, Nanchang Community, Baoan Road, Xixiang

Street, Baoan District, Shenzhen, China.

page 1 of 5 test report · 3) test standard: iso 20653-2013 4) test condition: 1. protection test...

Documents