oss.rc12

8/15/2019 OSS.RC12

1/75

OSS-RC NEW ANDENHANCED FEATURES

OSS-RC 7.1 -> OSS-RC 12.3 DELTA

PRESENTATION

8/15/2019 OSS.RC12

2/75

Content

Summary

New feature per area:

– GSM

– WCDMA – LTE

– Packet Core Networks

– LMS

– IMS

– OSS RC

8/15/2019 OSS.RC12

3/75

OSS-RC 12.0 summary (1)

Major release containing support for new system r

eleases:

– G12A

– W12A

– L12A

– T11B – EPC 2011B

– MSS 12A

– HLR-FE 12A

8/15/2019 OSS.RC12

4/75

OSS-RC 12.0 summary (2)

New Optional Features

– ANR Support for IRAT (LTE)

– LTE-GSM Mobility Support (LTE) – Pool Load Balance (EPC)

› New Basic Features

– EPC Manager (EPC)

› Evolve System and Platforms – Introduce X86 HW platform for Core PS and IMS

› Phased out Features

– SYROX (GSM)

– TET (GSM)

8/15/2019 OSS.RC12

5/75

OSS-RC 12.1 summary

› 12.1 is a minor release containing support for

- IMS 12A (Basic, FM and PM support)

- STN T12A

- W12A

- GGSN-MPG 11B (FM)

- SGSN-MME 12A (FM)

- SASN 11B (FM and PM)

- SASN 12A

- SAPC 11B (FM and PM)

8/15/2019 OSS.RC12

6/75

OSS-RC 12.2 summary 1(4)

› 12.2 is a major release containing support for

- G12B

- W12B- L12B

- CPG12A

- SASN 12A

- GGSN-MPG 11B- SGSN-MME 12A

- MSS12B

- T12B

- ML PT6010

8/15/2019 OSS.RC12

7/75


New Basic Features:

- OSS Monitoring Tool FAJ 121 2261

- License Administration Tool FAJ 121 2260

› New Optional Features:

- Automatic PCI Collision Resolution FAJ 121 2266- Performance Mediation for FAJ 121 2169

Large Networks

8/15/2019 OSS.RC12

8/75


› Enhanced Existing Features:

- Network Status Display (NSD) FAJ 121 2040

- WCDMA RAN Configuration Manager FAJ 121 621

- Neighboring Cell Support FAJ 121 2043

- LTE RAN Configuration Manager FAJ 121 1296

- EPC Manager FAJ 121 2048

- OSS-RC Security FAJ 121 447

- GSM Real Time Performance Monitoring

FAJ 121 46

8/15/2019 OSS.RC12

9/75


› Enhanced Existing Features:

- General Performance Event Handling

FAJ 121 173Trace Tool

- Radio Environment Analysis FAJ 121 2044

- Fault Management eXpert Rule Engine

FAJ 121 1672

- Subscriber Trace FAJ 121 1585

- Real Time Trace Manager FAJ 121 1133

8/15/2019 OSS.RC12

10/75

Renamed basic featureNew name Abbr. Feature Number Old name

Network Element Scripting NE-S FAJ 121 082 Job Manager

AXE Scripting AXE-S FAJ 122 10 Operations Procedure Support

Automated Software Rollout ASR FAJ 121 1453 Software Management eXpert

GSM RAN Configuration Manager GSM-CM FAJ 122 405 Cellular Network Administration

BSC LAN Switch Configuration

Manager

BSCLS-CM FAJ 121 1015 BSC IP Infrastructure Management

BTS Configuration Manager BTS-CM FAJ 122 476 BTS Configuration Management

Circuit Core Network Configuration

Manager

CNCS-CM FAJ 121 1637 Core Network Configuration Manager

8/15/2019 OSS.RC12

11/75

Renamed optional featuresNew name Abbr. Feature Number Old name

RBS Re-Homing Tool RBS-RH FAJ 121 1161 RN tool for reparenting

BSC Re-Homing Tool BSC-RH FAJ 122 853 Move BSC

Export File Editor EFE FAJ 121 1360 Trivial Export and Import

CPP Scripting CPP-S FAJ 121 1163 Advanced MO Scripting

SIU Configuration Manager SIU-CM FAJ 121 1019 Abis over IP management

IMS Configuration Manager IMS-CM FAJ 121 867 IPMM Configuration Manager

WCDMA Node Status Analyzer W-NSA FAJ 121 741 Node Status Analyzer

Core Network Status Analyzer CNSA FAJ 121 955 Core Network Status Monitor

GSM Trace Tool GSM-TT FAJ 122 413 Radio Network Recording

General Performance Event Handling

Trace Tool

GPEH FAJ 121 173 General Performance Event Handling

GSM CM Import/Export GSC-IE FAJ 122 417 Cellular Network Administration

Interface

GSM CM Import/Export Over CORBA GSM-OC FAJ 121 448 CNAI over CORBA

8/15/2019 OSS.RC12

12/75

GSM support

› Enhanced support for

– Packet Data Downlink Power Control (OSS-

RC 12.0) – TBFLIMIT per cell (OSS-RC 12.0)

– Fast return to LTE after call release (OSS-

RC 12.0)

– LTE to GSM NACC Support (OSS-RC 12.0)

– BSS G12A Compatibility (OSS-RC 12.0)

OSS-RC 12.0

FAJ 122 405

FAJ 122 476 FAJ 122 417

8/15/2019 OSS.RC12

13/75

RAN Power Save

› Enables reduction in power consumption by powering

down cells during no/low traffic periods

› Applied in capacity cells and cells in areas

with limited access during specific periods

› Cell unlock at congestion› Auto save in battery backup mode

FAJ 121 1284

OSS RC 10, 12

100 – 600 Watt

AC saving

depending on

RBS type

RPS

8/15/2019 OSS.RC12

14/75

Network Status Display

FAJ 121 1415

> Network topologies views – Monitoring on node, pool and network level

Fault and diagnostic detection

– Alarms, events, node logs and KPIs views

Trouble shooting

– Detailed fault resolution via

› Tracing capabilities

› Log retrieval and analysis>OSS RC 12: Additional trouble shooting support for W

CDMA to detect and recover “sleeping cells”.

8/15/2019 OSS.RC12

15/75

License administration tool

Key file download

– Download of key files via direct access to EricssonElectronic License Information System (ELIS) – Part

on LMS (License Management System)

license inventory

– View license inventory for single or multiple nodes

– Easy to filter license inventory – Export of inventory from LAT UI to file

View nodes’ license status

– Integration Unlock, Emergency Unlock, Grace

Period

Supports WCDMA and LTE networks Foundation for Customer Self service

– For license allocation via OSS

FAJ 121 2260

8/15/2019 OSS.RC12

16/75

OSS monitoring tool

Summary

-OSS Self Monitoring provides the operator with an efficient way to monitorbasic hardware and Operation System metrics for OSS-RC and ENIQ servers.

-When the value of monitored metrics passes a configurable threshold, an

alert is generated in the monitoring tool and an alarm event

can optionally be sent to OSS-RC Fault Management. Provides:

› monitoring for OSS-RC and ENIQ servers from a single portal.

› alerts the user to potential problems, such as filesystems filling up, before the problem happens.

› flexibility on a range of metrics which can be monitored.› advanced alertin functionalit

FAJ 121 2261

8/15/2019 OSS.RC12

17/75

Common components

OSS Network Explorer (ONE) Common Explorer

Network Status Display (NSD)

Fault Management

AXE Management

Software & Hardware Management (SMO)

Job Manager

Network Statistics Radio Network Optimization

Event Based Application

8/15/2019 OSS.RC12

18/75

GSM RAN Components

Cellular Network Administrator

Cellular Network Administration Interface

Base Station Management

Real-Time Performance Monitoring Radio Network Recording

A-bis over IP

IP configuration support

8/15/2019 OSS.RC12

19/75

WCDMA RAN Components Support for WCDMA &LTE

- WCDMA/LTE RAN Network Explorer

- Bulk Configuration management

- Base Station Integration Management

- Advanced MO Script

- Trivial Export and Import

- Consistency Checker

- Tranport Network Viewer

- Radio Network Handlinh

- IRATHOM

- Node Status Analyser

- Health Check

8/15/2019 OSS.RC12

20/75

WCDMA RAN Component

(Enhance Features)

Bulk Configuration for Radio (BCR)

Add RBS Wizard (ARW)

Node Status Analyzer (NSA)

Event Based Statistics in WCDMA (EBS-W) Fault Manager Viewer (FMV)

Fault Manager Basic (FMB)

General Performance Event Handling (GPEH) RN Tool for Reparenting (RTR)

OSS (O )( )

8/15/2019 OSS.RC12

21/75

OSS Network Explorer (ONE)(1)

8/15/2019 OSS.RC12

22/75

OSS Network Explorer (ONE) (2)

Menu Item Description

Find network object The Find network object item opens the Find Network object in dialog box which is used to find a specific network object. For a description of the dialog box,

For a description of how to search for a certain network object in the Network Browser,

Selected network

objects

The most recent selections (made in the same network browser view) are shown when choosing

the Select Network objects item in the Network Menu.

Log out Choose this menu item to log out from ONE.

Menu Item Description

Select network

browser view

To select a different graphical view of the network

objects, choose Select network browser view on the View menu. The selected network browser view is applied on the network structure in the Network Browser.

Create and Edit

network browser view...

Delete network

browser view...

8/15/2019 OSS.RC12

23/75

OSS Network Explorer (ONE) (3) The procedures that can be executed in ONE:

- Viewing Object Properties and ConnectivityInformation

- Creating a Network Browser View

- Editting a Network Browser View- Finding Network Objects

- Finding Previously Selected Network Objects(History Function)

- Dragginh and Dropping Network Objects- Starting an Application

- Logging Activities

8/15/2019 OSS.RC12

24/75

Element Manager (EMAS)

Graphically

driven MO

manager

Display is

populated

with

information

from the

MOM

Detailted

description

available for

eacharameter

8/15/2019 OSS.RC12

25/75

Advanced MO Scripting

(AMOS)(1)

> AMOS is a text-based Operation andMaintenance (O&M) client providing access to thefollowing services:

Alarm Service (AS)

Configuration Service (CS) File Transfer (FTP/HTTP)

Inventory Service (IS)

Log Service (LS)

Notification Service (NS)

OSE Shell (COLI)

Performance Measurement Service (PM)

8/15/2019 OSS.RC12

26/75

AMOS(2)- CommandCLASSIFICATION Command Descriptions

BASIC MO COMMANDS mom[aptcdbrflou] Print description of MO classes, CM/FM attributes, actions, enums and structs.

lt/clt/ltc[1-9] Load MO tree (full or partial) and build proxy table.

lc[1-9]/lcc Load MO tree (full or partial) and build proxy table.

lu/llu Unload MOs from MO tree.

pr/lpr Print MO LDNs and proxy ids for all or part of the MO tree currently loaded in moshell.

ma/lma Add MO(s) to an MO group.

mr/lmr Remove an MO group or remove MOs from an MO group (MOs will NOT be deleted, only the group).

mp Print all defined MO groups.

get/lget Read CM/FM attribute(s) from MO(s).

hget[c]/lhget[c] Read CM/FM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute).

kget/lkget Display CM/FM attributes in exportable printout format.

fro[m]/lfro[m] Read MO persistent data from node database via SQL.

st/lst Print state of MOs (operationalState and administrativeState when applicable).

prod Print productData of MO(s).

lk/llk View all MO's linked to an MO, and their states (admState and opState).

lko/llko Obsolete command, use lk/llk instead.

set[m][c][1]/lset[m][c][1] Set an attribute value on one or several MO's.

eset[c][1]/leset[c][1] Set one or several attributes on one or several MO's, using regexp matching on the attribute name.

rset/lrset Set attribute value on a restricted attribute or change the MOid of an MO.

bl[s]/lbl[s] Lock or soft-lock MO(s).

deb/ldeb Unlock MO(s).

acl/lacl Lists available MO actions.

acc[e]/lacc[e] Execute an MO action.

cr[e] Create an MO.

del/ldel Delete MO(s).

rdel/lrdel Delete MO(s) together with children and reserving MOs.

s+/s-/s? Sort MO list in alphabetical order instead of proxy order.

u+[s]/u-/u?/u! Handling of undo mode (for cr/del/rdel/set/bl/deb/acc commands). Can be used for generation of MO scripts as well.

run Run a command file in moshell format.

trun[is1cr] Run a command file in EMAS/MoTester format.

ctrl-z Abort an MO command or a "for" loop. Type "touch /tmp/;fg" to resume the moshell session.

pol[s][h][c][u][m][k] Poll the node until the MO service is up or until an operation has completed.

re[i] Disconnect and reconnect to the CM service (mobrowser) and/or the PM service (pmtester).

getmom Check the MOM version currently stored on the node.

parsemom Parse an xml MOM file.

ld Load one MO from the tree and add to the proxy table.

eget/leget Read attributes that are not listed in the MOM (e="Extended").

sget/lsget Read CM/FM attributes from MO(s), one by one ("Slow" get).

fdel/lfdel Delete MO(s), including systemCreated MOs.

cvls/cvmk/cvms/cvset/cvrm/cvcu/cvget/cvput/cvls1 CV

backup handling: list, make local, make remote, remove,

setstartable.

8/15/2019 OSS.RC12

27/75

AMOS(3)OTHER MO COMMANDS inv[hlr] Complete HW/SW inventory. Includes information about RPUs, licensing, JVM, devices, XPs, ISL, etc.

cab[slxradfgtmeh] Display of miscellaneous COLI printouts relating to hw, sw, restarts, leds, cpu load, errors, disk/ram usage

stc[p][r] Display state and configuration of Atm/Tdm CrossConnections.

std[ar] Display state and configuration of devices (RNC and MGW only).

stv[b][r] Display state, user, and bandwidth usage for ATM ports and channels.

stt[r] Display state and user of Physical Ports and Ds0Bundles.

sti[bcpr] Display state and configuration of IP interfaces.

hc Run a general healthcheck on the node. Obsolete ! Use dcg command instead.

dcg[meiasrfk] Fetch data for TRs/CSRs, according to the Data Collection Guidelines.

diff[o][m]/ldiff[m] Parameter auditing or MO dump comparisons.

str[12ft] Print status of the IubLinks/AbisLinks and their associated Cells and Channels (RNC/BSC only).

lki Obsolete command, use lkra instead.

lkr[a] Print RNC Iub resources allocation.

remod[u][2] Remodule an IubLink (RNC < P5). For RNC >= P5, use command "resub".

resub Moving Iub resources within or across Subracks (RNC >= P5).

tg[r][c][d] Print Resource Object information for all MOs in LmCell (RNC only).

uer[d][t][i][s] Print UE context data (serving or drifting) for all active calls (RNC only).

ced[h][r][p] Print consumption of cell resources and rbs hw (RNC only).

al[atkc] Print the list of active alarms. Acknowledge/Unacknowledge an alarm.

lg[acdefghilmnopqrstuvwxyz] Fetching and processing of node logs

uv Print or change moshell configuration settings (also called "user variables").

pv Print scripting variables.

OTHER COMMANDS !/l Execute a unix command on the PC/workstation.

l+[m][m][s][o]/l-/l? Open/close moshell logfiles.

dbc[s] Database consistency check

ose/coli command Send a COLI command to the node's OSE shell. Type "h ose" for syntax help and "?" to view available commands.

bo[ar]/ba[swdp]/br[wd]/be[0-50]/bp Manage board groups that can be used for running COLI commands on multiple boards.

lh Run COLI commands on all boards of a board group.

mon/mon+/mon-/mon? Start/stop/check the target monitor server on the node and/or start the monitor client for one or more board Group(s).

sql+/sql-/sql? Start/stop/check the SQL client on the node (CXC1325608).

pgu[c][f][r] Program Upgrade. For lab use only, eg, to load black LMs.

proglist/progkill List or restart programs on boards or board groups.

fte Filtered trace and error command.

ftree[f] Recursive listing of a directory on the file system of the node or the workstation.

ftget[c]/ftput[c]/ftdel Transfer files or directories to/from the node, using ftp or sftp.

htget Transfer files from the node using http.

edit Edit a file on the node.

fclean[f|ff|a|d|e] Removal of obsolete loadmodules OR recursive removal of a directory on the node.

hi Print history of moshell commands entered during the current session.

time[t] Measure time taken by an moshell command or by each command in a moshell command file.

lmid[c]/upid[om] Print translation of loadmodule/upgradepackage product number or T&E error codes.

p/w/pw/b Change moshell prompt and/or window title.

prox[+-] Toggle display of proxy identities in printout of get command.

col Toggle display of colors.

ul Toggle display of userlabel in st/lst and pget/lpget printout.

conf[bld][+-] Toggle confirmation on various MO commands.

gs[+-]/gsg[+-] Toggle display of old/new attribute value in set/bl/deb commands.

ip2d/d2ip Convert an IP address into the format used in the fRO (sql database) or vice-versa.

h2d/d2h Convert an integer to hexadecimal or viceversa.

h2b/b2h Convert a binary to hexadecimal or viceversa.

wait Specify a delay in hrs, mins, secs, or rops. Similar to the unix "sleep" command (scripting).

return Exit from a command file without exiting from moshell (scripting).

print Print a line or variable (scripting).

alias/unalias Print or define command aliases.

smd[slcr] Server Maintenance - disk usage

q/by/exit/quit Exit moshell.

pmom[acd]/lmom[c] Print description of PM counters (pmom) or log attributes (lmom, CDMA only).

pget/lpget Read PM attribute(s) from MO(s).

spget/lspget Read PM attribute(s) one by one ("slow pget").

8/15/2019 OSS.RC12

28/75

(ARNE)(1)

(ARNE)(2)

8/15/2019 OSS.RC12

29/75

(ARNE)(2)>ARNE is used to configure the Operations Support System, Radio and Core (OSS-

RC) topology model.

>ARNE is used to add, modify and delete Network Objects from the topology model in

OSS-RC.>ARNE provides two mechanisms to configure the network topology:

- ARNE Graphical User Interfaces (GUIs) ARNE GUIs are more suitable for making

small changes to the network topology.

- Import/Export files Import/Export files are useful for making large changes to the

network topology and for backing up and restoring the network topology.

O (S O)( )

8/15/2019 OSS.RC12

30/75

Organizer(SMO)(1)

8/15/2019 OSS.RC12

31/75

SMO(2)

>SMO provides the following functions for the operator: Automatic License Deployment (ALD) from Ericsson.

Automatic Software Deployment from Ericsson.

Backup administration, including the transfer of backups toOSS for supported network elements.

Distribution of licence keys to CPP and AXE networkelements.

License key inventory for CPP and AXE network elements.

Monitoring parallel software handling.

Remote software upgrade.

Software distribution from OSS to network elements. Software export for CPP and AXE network elements.

Software inventory, including comparison between networkelements.

Uniform handling of different network element types.

8/15/2019 OSS.RC12

32/75

SMO(3) Create CV: Choose network element in tab

Network. Then click right mouse choose CreateCV

8/15/2019 OSS.RC12

33/75

SMO(4)> Put License Key into tab License

8/15/2019 OSS.RC12

34/75

SMO(5) Load license key for nodeB

8/15/2019 OSS.RC12

35/75

SMO(6)

Then choose NextNextNextNextNext

8/15/2019 OSS.RC12

36/75

SMO(7)

Compare difference between License Key before

and after

SMO(8)

8/15/2019 OSS.RC12

37/75

SMO(8) Upgrade software for nodeB

Adjust : to synchronyze data between network element and SMO

8/15/2019 OSS.RC12

38/75

SMO(9)

S O(10)

8/15/2019 OSS.RC12

39/75

SMO(10)

Then choose NextNextNextNextNext

OSS Common Explorer (1)

8/15/2019 OSS.RC12

40/75

OSS Common Explorer (1)

8/15/2019 OSS.RC12

41/75

OSS Common Explorer(2) We can check status of all cell on RNC

Cabinet Viewer(1)

8/15/2019 OSS.RC12

42/75

Cabinet Viewer(1)

8/15/2019 OSS.RC12

43/75

Cabinet Viewer(2)

The Cabinet Viewer provides the user with a tool to

easily pinpoint a hardware fault in the RBS causingtraffic disturbance. When the user receives anindication that the service in the radio network isdegraded, the Cabinet Viewer can be launched toquickly and easily identify the problem.

From the Cabinet Viewer the user can:

■Restart the RBS or a selectable object

■Lock or unlock a selectable object

■Run a Hardware test on a selectable object■Refresh RBS information

■Save details (about a faulty selectable object in a file)

■Save logs

8/15/2019 OSS.RC12

44/75

Cabinet Viewer(3)

Node Status Analyser (1)

8/15/2019 OSS.RC12

45/75


8/15/2019 OSS.RC12

46/75


The NSA is used to:

Identify a problem with an RBS

Obtain data on cause of RBS service degration

Obtain RBS and RNC related status information

(including Iub link and RBS hardware status)

Take corrective action directly via NSA

Launch other UTRAN applications if required for

more advanced problem analysis and corrective

action

Detailed information for UTRAN cells or channels is

displayed in a window at the bottom of the GUI

anne on gurat on

8/15/2019 OSS.RC12

47/75

anne on gurat onAdministration)(1)

anne on gurat on

8/15/2019 OSS.RC12

48/75

anne on gurat on Administration)(2)

OSS Common Explorer displays the valid

configuration, that is, the current active radio network

configuration. Using the PCA view, the user may also

work with planned configurations that are models ofintended changes to the valid configuration. Planned

configurations are prepared with close reference to the

active network, but the changes are not made on the

network until such time as the user decides toimplement them, that is, to activate the planned

configuration.

Ad i i t ti )(3)

8/15/2019 OSS.RC12

49/75

Administration)(3)

Configuration order for a preconfigured, synchronized NetworkElement (RNC)

8/15/2019 OSS.RC12

50/75

Consistency Check (CC)(1)

The Consistency Check application is used to checkthat Network Elements in the Radio Access Network(RAN) have consistent data. If data is not consistentbetween Network Elements problems in the networkcan occur. Using the Consistency Check interface,Network Elements can be checked for consistency.This is done by applying checking Network Elementsconfiguration data using consistency 'rules'. Theresults of a consistency check can be displayed in a

report. The Consistency Check application is primarily used

in planned configurations to help ensure error-freeconfigurations. Consistency Check can be used in the

valid area also and is useful in troubleshooting thevalid confi uration.

8/15/2019 OSS.RC12

51/75

Consistency Check (CC)(2)

8/15/2019 OSS.RC12

52/75

Consistency

Check(3)

At present, VNP2doesn’t buy this

feature.

Complete the following steps to perform a consistenc

y check on Network

Elements:

1.Select Network Elements

from the list of available Net

work Elements.2.Assign rules to apply to th

e consistency check.

3.Start the consistency chec

k (and name the report that

will contain the

results of the check).

It is possible to stop an exist

ing consistency check, as d

escribed in the section

Stop the Consistency Chec

k.

8/15/2019 OSS.RC12

53/75

Alarm List Viewer (ALV)(1)

Al Li t Vi (ALV)(2)

8/15/2019 OSS.RC12

54/75

Alarm List Viewer (ALV)(2) Severity Button

8/15/2019 OSS.RC12

55/75


8/15/2019 OSS.RC12

56/75


Each Alarm List Viewer window can consist ofany number of individual alarm lists

Each Alarm List shows the alarms for one or

several network elements divided into one or

several lists, where the sorting and filtering canbe set for each list

The most important information for each alarm is

shown in the aalrm list, with one line per alarm.

What information to show, in which width and inwhich order are defined for each list


8/15/2019 OSS.RC12

57/75


Save configuration.

Alarm Log Browser(1)

8/15/2019 OSS.RC12

58/75


Al L B (2)

8/15/2019 OSS.RC12

59/75



8/15/2019 OSS.RC12

60/75


Al L B (4)

8/15/2019 OSS.RC12

61/75


Performance Management Subsystem (PMS)(1)

8/15/2019 OSS.RC12

62/75


Performance Management

8/15/2019 OSS.RC12

63/75

Performance Management

Subsystem (PMS)(2)

To create, schedule, suspend, resume and delete PMmeasurement for WRAN and LTE RAN

Mesurement are:

- Statistical

- User Equipment Traffic Recording (UETR)

- Cell Traffic Recording (CTR)- General Performance Event Handling (GPEH)

- Cell Trace

After each ROP period, PMS collects one statistics datafile from each NE

Data file has all perfprmance data reported by activeperformance monitorring on Nes within specific ROP

Data is collected using FTP or SFTP

Performance Management Subsystem

8/15/2019 OSS.RC12

64/75

g y

(PMS)(3)

P f M S b (PMS)(4)

8/15/2019 OSS.RC12

65/75



8/15/2019 OSS.RC12

66/75


8/15/2019 OSS.RC12

67/75



8/15/2019 OSS.RC12

68/75



8/15/2019 OSS.RC12

69/75



8/15/2019 OSS.RC12

70/75


Using Total Commander login in OSS to give

this file

Ericsson Network IQ (ENIQ)

8/15/2019 OSS.RC12

71/75

Ericsson Network IQ (ENIQ)

(1)

ENIQ(2)

8/15/2019 OSS.RC12

72/75

ENIQ(2)

ENIQ(3)

8/15/2019 OSS.RC12

73/75

ENIQ(3)

Central Management Console (CMC)

8/15/2019 OSS.RC12

74/75


C t l M t C l (CMC)

8/15/2019 OSS.RC12

75/75


oss.rc12

Documents