os x 10

10/24/2014 OS X 10.10 Yosemite Install Guide | rampagedev

https://rampagedev.wordpress.com/os-x-10-8-mountain-lion/comment-page-1/ 1/37

OS X 10.10 Yosemite Install Guide

About:

This guide will walk you through step by step on how to install Mac OS X10.9 Mavericks and Mac OS X 10.10Yosemite using a Retail Install Method. If you need more assistance email me at [email protected]. I amsupporting 10.9 and 10.10 using Clover and 10.6 to 10.9 using myHack.

Index:

Section 1: UEFI Clover Install Method

Part 1: System RequirementsPart 2: Mac OS X DownloadPart 3: BIOS SettingsPart 4: Disk FormatPart 5: Clover Bootloader InstallationPart 6: Kext InstallationPart 7: Mac OS X InstallationPart 8: Post Install

Section 2:myHack Install Method

Part 1: System RequirementsPart 2: myHack USB Drive CreationPart 3: InstallationPart 4: Post Install

Section 3: AMD myHack Install Method

Coming Soon!

Section 1: UEFI Clover Install Method

Part 1: System Requirements

Intel Core 2 Duo or laterNvidia GTS 8000 Series or Later orATI 4000 Series or Later2 GB of Ram16 GB or larger Hard Drive or Solid State Drive8 GB Flash Drive

rampagedevA great WordPress.com site



Part 2: Mac OS X Download

1. Download Mac OS X 10.9 Mavericks from Apple here or Mac OS X 10.10 from Apple here for free:

Part 3: BIOS Settings

1. Boot to the BIOS of the Computer

2. Disable CSM in the BIOS

3. Change Secure Booting from Windows OS to Other OS

4. Save and Restart

Part 4: Disk Format

1. Open Disk Utility:

2. The following screen should appear:



3. Locate the Drive Clover will be used on:

4. Click on the drive:

5. Locate Partition:

6. Click on Partition


Follow

Follow rampagedevGet every new post deliveredto your Inbox.

Join 479 other followers

Enter your email address

Sign me up

Build a website with WordPress.com



8. Locate Partition Layout:

9. Change Current to 1 Partition:

10. Locate Options:

11. Click on Options

12. Select GUID and Click OK



13. Locate Partition Information:

14. Change Format to Mac OS Extended (Journaled)

15 Change the Name to Clover

16. Click Apply:

17. The Drive is now Formatted

Part 5: Clover Bootloader Installation

1. Download the latest Clover Install Package here

2. Locate the Clover Install Package in the Download folder:



3. Run the Install Package


5. Click on Continue two times




7. Select the Drive Clover Bootloader is to be Installed to

8. Click on Continue


10. Click on Customize:




12. Make the following changes:



13. Click on Install:

14. Clover Bootloader is now Installed

26: Download the following command file for 10.9 here and for 10.10 here

27. Run the command file and the USB Creation will be automated:

Part 6: Kext Installation



1. Mount the EFI Partition that Clover is installed to as per Part 6 found here if the EFI Partition is not alreadymounted.

2. Double Click on the EFI Disk:

3. Go to the following location:

/EFI/CLOVER/kexts


Note The 10.10 Folder May Be Missing So Simply Create A Folder Called 10.10

5. Double Click on the Folder with the version of Mac OS X that is installed on the Drive

6. Copy the Kexts into that folder

Note Generic Extensions To Boot Can Be Found Here

7. Kexts are now installed for Clover

Part 7: Mac OS X Installation

1. Boot into the Clover installer usb drive

2. To make the installer boot you may need to enter boot flags. Common boot flag combinations are as followed:

LGA 2011: -v cpus=1 npci=0x2000LGA 1366: -v cpus=1 npci=0x2000

LGA 1150: -v npci=0x2000LGA 1155: -v npci=0x2000

Needed for 10.10: kext-dev-mode=1



Note: If when you select the Installer to Boot to and the System instantly reboots back to the CloverScreen. Mount the EFI partition on your USB and go to drivers64UEFI and remove VBoxHfs-64.efi and replace it with HFSPlus.efi found here

You may also use the Clover Config File provided on the DMGs for your socket if applicable

3. Once booted select your Language to begin the installation process:

4. Go to Utilities/Disk Utility:

5. Click on the HDD you wish to use and select Erase

6. Format your drive to Mac OS X Extended (Journaled):

5. Proceed with the installation

6. After the initial setup the system will restart



7. Boot into the Clover installer usb drive and select the installer again

8. Once booted the Installer will automatically run and install Mac OS X

9. When the Installer is complete Restart

Part 8: Post Install

1. Boot into the Clover installer usb drive

2. Select the Partition you installed Mac OS X to

3. Use the arrow keys to select the drive you installed Mac OS X to

4. To make the install boot you may need to enter boot flags. Common boot flag combinations are as followed:



Needed for 10.10: kext-dev-mode=1

5. Mac OS X 10.9 Mavericks in now installed on your system:

Section 2: myHack Install Method

Part 1: System Requirements

Intel Core 2 Duo or laterNvidia GTS 8000 Series or Later orATI 4000 Series or Later



2 GB of Ram16 GB or larger Hard Drive or Solid State Drive8 GB Flash Drive

Part 2: myHack USB Drive Creation

1. Download Mac OS X 10.9 Mavericks from Apple here for free:

2. Insert your flash drive into a Mac Based System

3. Download myHack here

4. Run myHack:

5. Enter your Password when prompted:

5. From the Drop Down Menu select Create OS X Installer then click Ok

6. From the drop down menu select Create OS X 10.9 Install Disk then click ok



8. Now select the drive you wish to use to create your installer to then click Ok

9. At this point a message will appear informing you that all data on the drive will be lost do to the fact thatmyHack will reformat the drive click Ok

10. Wait until myHack is complete

11. Eject the Mac OS X 10.9 Mavericks USB installer from the system

12. Continue to Section 3

Part 3: myHack Installation

1. Boot into the myHack installer usb drive

2. To make the installer boot you may need to enter boot flags. Common boot flag combinations are as followed:



Some GPUS may need the following boot flag(s) in addition to the ones listed above:

GraphicsEnabler=No

nv_disable=1

3. Once booted select your Language to begin the installation process:

4. Go to Utilities/Disk Utility:



5. Click on the HDD you wish to use and select Erase

6. Format your drive to Mac OS X Extended (Journaled):

5. Proceed with the installation

Notice:

Once you reach the point myHack asks for you to select a Extra Folder Restart the Computer andDo Not do as myHack asks

6. Continue to Section 4

Part 4: Post Install

1. Boot into the myHack installer usb drive

2. Use the arrow keys to select the drive you installed mac to

3. To make the install boot you may need to enter boot flags. Common boot flag combinations are as followed:



Some GPUS may need the following boot flag(s) in addition to the ones listed above:



GraphicsEnabler=No

nv_disable=1

4. Mac OS X 10.9 Mavericks in now installed on your system:

Share this:

Twitter Facebook 2

861 Responses to OS X 10.10 Yosemite Install Guide

Like

2 bloggers like this.

sea_man says:July 11, 2012 at 4:46 am

Nice !!! Thanks for the tutorial.

Reply

rampagedev says:July 11, 2012 at 5:16 am

Been busy testing ML and different methods on how to use my hack

Reply

silord says:July 28, 2012 at 11:24 am

SleepEnabler.kext works @ ML (GA X79-UD3) ?

Reply



Pingback: All Asus Mainstream x79 Motherboards DSDT (Beta) For Nvidia and AMD/ATI GPUS (Updated 7-27-2012) | rampagedev

Pingback: All Gigabyte Mainstream x79 Motherboards DSDT (Beta) For Nvidia and AMD/ATI GPUS (Updated 7-23-2012) | rampagedev

Pingback: All AsRock Mainstream x79 Motherboards DSDT (Beta) For Nvidia and AMD/ATI GPUS | rampagedev

rampagedev says:July 29, 2012 at 9:29 am

Is that a statement or a question?

Reply

maxrotac says:August 1, 2012 at 10:54 am

Love your site! it is refreshing!

Ive not been able to get mountain Lion to work on my Asus P9X79.. My Lion installation does work, but I do have some littleissues.. Will you be posting a DSDT of that board?

Reply

rampagedev says:August 1, 2012 at 4:49 pm

Send me an Email and tell me what issues you have been having.

Reply

fabricioarrudabricio says:November 11, 2013 at 2:04 am

Hey rampagedev, I did everything from your guide tutorial, but when the installation screen shows up, 10seconds later, shows the message: THE OS X Installation couldnt be completed (Shutdown or Restart).I have a Gigabyte Z68X-UD3H-B3 (UEFI /rev. 1.3)16 GB RAM ddr3,ssd ocz v4 128GB,GTX 580.

I tried everything is possible, I mean boot flags, -x -v IGPEnabler=Yes/No npci=0x2000GraphicsEnabler=Yes/No

I appreciate all your help.

http://tinypic.com/r/119qpmu/5

ThanksFabricio

rampagedev says:



Pingback: ML Install Help Please - Compatible System?

Pingback: Asus n53s

November 11, 2013 at 2:06 am

Remake the USB installer.

fabricioarrudabricio says:November 11, 2013 at 7:31 pm

Hey, Just so good job, i did a donation. You deserve it! I hope it helps.You did a great job! Thanks for all attention you give!Cheers.Fabricio

Ps. I will send you, my doubts about installation. Thanks

maxrotac says:August 2, 2012 at 7:40 am

I will try first to get Mountain Lion installed.. If this fails I will surely post my problems here on the blog! Thanks

Reply

rampagedev says:August 2, 2012 at 7:42 am

You can always E-mail me.

Reply

mdg1618 says:August 6, 2012 at 12:06 pm

Hello Rampagedev,

Thank you for this guide. I followed it until step 15 where myhack asked if I would like to install its extras or my own,butwhen I restarted my system it froze at the Verifying DMI Pool bootscreen.

I have tried various methods for the last 6 days in the hopes of finally installing Mountain Lion on my SL 10.6.6 system,which I had increasing trouble trying to update to 10.6.8 and therefore left my system at 10.6.6.

My system specs. are:mobo: GA-X58A-UD3R rev 1.0 BIOS F6CPU: i7-920 2.66GHz LGA 1366GPU: XFX ATI Readon HD 5770RAM: 6GB (use only 4GB for installation)Audio: Realtek ALC889Ethernet: Realtek 8111D

Any suggestions or advice in this matter would be greatly appreciated.



Regards,mdg1618

Reply


You have to use the USB installer drive to boot into the installation.

Reply

mdg1618 says:August 7, 2012 at 2:03 am

Hello Rampagedev,

Thank you for your reply. I used the USB installer and could not run Mountain Lion. When I ran it in verbosemode I got this message ACPI-SMC-Platform Plugin:Start-Waitforservice(resource Matching(AppleIntelcpuPower Mangement) Time out. Do you have any suggestions as to how I can proceed?

Thank you in advancemdg1618


Email me a pic with your motherboard information and I will take a look.

svsdiscussionS.V. says:October 20, 2014 at 5:36 pm

I a having the same problem on DX58SO

rampagedev says:October 20, 2014 at 9:21 pm

As in?

chad says:August 11, 2012 at 4:41 pm

boot0: gpt boot0:test boot0:error how do i fix this

Reply


Reinstall the boot loader.

Reply



maxrotac says:August 16, 2012 at 7:25 pm

Asus P9X79 Pro, runs Mountain Lion Perfectly!! The only thing that drives me nuts is a reboot when I do a systemshutdown..Tried to find de correct Bios setting, but.. not working..

Reply


Send me an email and we can address this issue.

Reply

CruseRocks says:August 21, 2012 at 11:12 am

RampageDev Bro i have seen almost all your post and all are pretty much clear and in details with proper description. Butthis tutorial i feel you should make it more into details.

Reply


What do you mean? This is word for word what you should do

Reply

Ed says:August 27, 2012 at 12:02 am

I am in a dilemma installing Mountain Lion on my P9X79 Pro using the BIOS 2104 via UniBeast created USB installer. It justhangs at the Apple Logo. Kindly help me on what do you need (BIOS settings, BIOS file, etc)

Reply


Boot with: -v

Then email me a pic of where it hangs. THe defualt settings should work fine.

[email protected]

Reply

paul jaspr says:October 29, 2012 at 1:31 am



hey rampage,

Ive been having a similar issue as Ed. When I try to do a normal install, it just hangs on the apple logo. Sodecided to boot verbose with the same commands -v npci=0x2000 GraphicsEnabler=No cpus=1. I was ableto get to the boot screen, but after I agreed to the terms it asks to choose which drive I would like osx to beinstalled. The only problem is, there are no drives to choose from. Its just empty. I checked the hard driveand I hear it running and my bios recognizes it. Could it still be a hard drive problem, or is it something else?Thanks much in advance!I am running i7 3820 CPUasus p9x79le moboevga geforce gt640 GPU16gb corsair vengeance RAM1 tb seagate barracude gpu

rampagedev says:October 29, 2012 at 1:35 am

You are skipping a step:

1. Boot into the myHack installer usb drive to begin the installation process and go to Utilities/Disk Utilityto format your drive to Mac OS X Extended (Journaled) then proceed with the installation


thanks for the prompt response. Im actually booting using unibeast thumb drive. I originally bootednormally using the usb drive but it just hangs on the logo I cant even get to disk utility


I recommend using myHack as per my guide You must boot with -v npci=0x2000 cpus=1 if this is a x79MB.


As Ive mentioned before, I did input those commands, successfully got to the boot screen, agreed to theterms and agreements, but when it comes time to choose which drive I want osx to be installed on, the field isjust blank. My hard drive does not show up as an option, thus halting my installation process there. Thanksfor the inputs!


OK, I think I see were you and me are missing. You need to format your HDD or SSD. Did you format thedrive yet?




No because I can not get to disk utility if i boot normally.


You said that you get to where you see where to select the HDD/SSD for install correct?

Just go up to utilities and then to Disk Utilities

Ed says:August 27, 2012 at 8:19 pm

And the only solution was:-v npci=0x2000 GraphicsEnabler=No cpus=1

Reply


nm i got it to work. thanks!

Reply

kpatters says:December 1, 2013 at 8:08 pm

You said you got it to workwhat exactly di you do/ I seem to be having the same issue you mentioned above.My dives dont show as an option to install. HELP!

rampagedev says:December 2, 2013 at 12:34 am

Disk Utility and then format them.

Ed says:August 27, 2012 at 9:34 am

@rampagedev:

I really appreciate the very quick reply. For now, just to be aligned, I will use myHack for my USB installer first rather than unibeast. Although myhack is somethingreally new to me at the moment. I am positive and hopeful that this works Thanks a bunch!

Reply


My hack has been around since Snow Leopard Glad I could help.

Reply



Ed says:August 27, 2012 at 8:18 pm

Thank you so much for guiding me. Im able to install Mountain Lion already

Richard says:September 3, 2012 at 12:29 am

First, as always thanks for taking the time to do all of this!Reading these instructions, it is not clear to me when one is doing a clean install of mountain lion in which step does thecustom DSDT get used / installed? I havent tried doing any of this yet and thought I would research this a little bit before Ispend the time doing the upgrade

Thanks, Richard.

Reply

rampagedev says:September 3, 2012 at 12:32 am

If you are doing a upgrade then you do section 2. If you are not doing a upgrade you skip step 2.

Everything stays as it was before. DSDT is post install and has no place in a install guide.

Reply

Richard says:September 3, 2012 at 1:00 am

So then after doing the above steps to get the install up with myHack then you are saying to just follow steps:6 through 13 of your guide here: https://rampagedev.wordpress.com/2012/06/30/all-asus-mainstream-x79-motherboards-dsdt-beta-for-nvidia-and-amdati-gpus/

Is that correct?

Cheers, Richard

rampagedev says:September 3, 2012 at 1:05 am

Steps 8 through 13 because the extra folder stays.

rampagedev says:September 21, 2012 at 8:47 pm

Just remake your install usb drive

Reply

rampagedev says:



September 23, 2012 at 10:41 pm

Make sure you are not plugged into a USB 3.0 port.

Reply

Janus says:September 24, 2012 at 11:40 am

Tried adding -f, and moving sata cable to sata6 port1, unsuccessfully.I have formatted the HD in GUID not MBR. Maybe i should use MBR?I will try.

Reply


You continuously are skipping steps both in the Instal Guide and the Read Me in the DMG folder. You need to followinstructions or other wise please go buy a real Mac. There is no other way of say that you need to follow the setinstructions!

Reply

Janus says:September 25, 2012 at 12:39 pm

OK successfully installed! It seems that my mistake was i didnt format during the installation process, but previouslyon macbook external hd dock.Audio network and usb3 doesnt work,usb2 works, now i will look for Apple USB 3.0 kext.

I didnt find the recovery folder in the hd root. Here are some pictures.

thanks again for your hack.

Reply


Again you did not read and follow throught on set instructions. The only reason none of the things arelisted are not working is that you yet again did not follow set instrctions on the support page on my blogfor your motherboard. READ again the guide about the recovery folder since it is only present duringUpgrades.

Janus says:September 25, 2012 at 3:38 pm

Ah yes the last steps, not the last step!!! Ok thank you for your patienceNow i hope to understand about the motherboard issues.



Pingback: How do I install Mac OSX on my PC? (Ive Tried Nearly Everything!)

Pingback: problem after installing hackintosh mounian lion


Just read the Asus x79 support page on my blog.

Broehl says:September 25, 2012 at 11:48 pm

I am getting stuck on a [ PCI Configuration begin ]My system isMB = AsRock X79 Extreme 6Processor = i7-3820 stock speedsMemory = 32g DDR3-1866HDD = 240g Agility 4 SSDVideo = ATI-6870 2g 256bit

I have tried everything and searched every form. I am seeing that asrock is not a popular board or the LGA2011 for aHackintosh, Can you please help!?!?!?

Thanks

Reply


-v cpus=1 npci=0x2000

Reply


-v cpus=1 npci=0x2000

Also read this because it clearly states what to boot with so you need to do a bit more reading because this is themost common boot issues with Hackintoshes and is very easy to find a fix for:

https://rampagedev.wordpress.com/2012/07/22/all-asrock-mainstream-x79-motherboards-dsdt-beta-for-nvidia-and-amdati-gpus/

Reply

Janus says:October 1, 2012 at 9:42 am

Just curious.



Pingback: OSX Mountain Lion GM 12A269 on ASUS P5G41T-M LX so far so good - Page 5

Does this guide work with ML 10.8.2 dmg?Deleting OemSMBIOS.kext and restoring AppleHDA, Networking, and Graphic Card driversas you describe in Mac OS X 10.8.2 Beta Testing Posted on August 26, 2012

Reply


Yes

Reply

kurt hennrich says:October 22, 2012 at 3:39 pm

hello rampagedev!thanks to your great work, based on your docs and tools I successfull have setup a R4E board with ML. All usual stuff worksperfectly. donation was a honor.but there is another thing I need:I want to install 3 nvidias cards: GTX680, GTX670, Quadro4000every card of the 3 works perfectly, two of them work perfectly in any combination, but not three of them -> resulting inkernel panic shortly before the desktop should show up.so I am questioning if 2 graphic cards are the maximum possible or if you could give me a hint how to go on.the GTX680 + GTX670 should run headless just for cuda, the Quadro4000 for monitor/interface.thank you for your time,ji

Reply


Email me about this issue and we can go from there.

[email protected]

Reply

dustydatso says:October 28, 2012 at 10:32 pm

I have a HP probook 4530s with the following specs:-CPU : (Sandy Bridge) Intel Corei3 2310MRAM : 4igGraphics: HD 3000BIOS : 68SRR Ver. F.29I created the installation usb drive with myhack. I booted with v and it loads and installs everything but it hangs where it issupposed to display the first graphic display with the mouse pointer at the top most left corner. Please help.

Reply




I do not support laptops. But boot with -v GraphicsEnabler=No

Reply

dustydatso says:October 29, 2012 at 11:05 am

I tried it and still not installing. If you want I can send the image of where it hangs?.

Pliz I need help, I know you are genius in mac related issues, pliz help me

Thanx in advance.


May you please take a look at this error.

Reply


Boot with:



GraphicsEnabler=Yes

Reply


No lucky. Still the same error at the same spot. What are .plist injections?

Pari05 says:November 30, 2012 at 7:52 pm

hi rampage, im Pari05 from the insanely macs forum

i have try the guide, but it remains stuck on a white screen with the pointer [that i can move], i think before the launching ofinstaller/Disk utility any tips?

thank you

Reply

rampagedev says:November 30, 2012 at 11:14 pm

Are you using the AMD 6850 or 6870?

Reply

leps says:December 1, 2012 at 10:46 pm

no boot with uefi bios!!!

Reply

rampagedev says:December 1, 2012 at 11:14 pm

That is untrue. All x79 and 7-Series motherboards are UEFI and they all boot fine What is your issue?

Reply


Email me. [email protected]

Reply

LUIS says:December 7, 2012 at 1:42 am



WHY I AM GETTING THIS MASAGEmyHack cant be opened because it is from an unidentified developer.

Reply


https://rampagedev.wordpress.com/2012/08/24/app-cant-be-opened-because-it-was-not-downloaded-from-the-mac-app-store-fix/

Reply

Dodo says:January 5, 2014 at 5:51 pm

The link is now:

Not FoundApologies, but the page you requested could not be found. Perhaps searching will help.

rampagedev says:January 5, 2014 at 6:47 pm

https://rampagedev.wordpress.com/os-x-tweaks/app-cant-be-opened-because-it-was-not-downloaded-from-the-mac-app-store-fix-2/

LUIS says:December 7, 2012 at 7:42 pm

I fix The problem Know I am installing Myhack in the usb.Thanks.

Reply


Good to hear.

Reply

LUIS says:December 7, 2012 at 7:43 pm

Thanks for the info man.Let you know more in the next couple hours about may instaltion.

Reply




Sounds Good.

Reply

Luis says:December 8, 2012 at 3:33 am

So after this question Do you want to use the generic Extra that comes with myHack or specify your own?This are pop pup windows! So when I restart the pc befor the question above or athe next pop pup window?Any way in the guide say restart the pc but wen????Is also other question myhack is asking if I wan to to remove the applePolicycontro.kext???So when I Need to restart the pc? Please help

Reply


Restart when myHack asks for the Extra folder do not do as myHack asks. Thats right in the guide.

Reply

Kevin Lepp (@kevinlepp) says:December 8, 2012 at 8:12 pm

I used your guide thanks and I can boot into MLProblem is I need to use -v npci=0x2000 for it to start and I have no Audio any ideas?Thanks for a great guideCheers

Reply


I have no idea what your system specs are so how would I know where to start. lol

Reply

Kevin Lepp (@kevinlepp) says:December 9, 2012 at 2:50 am

Lol sryAsus P9X793930K i7GTX 560tiVengeance Ram


Make sure you are following this:



https://rampagedev.wordpress.com/dsdt-downloads/how-to-install-dsdt/


Ok, I went back from the start and it all working with a few things Id like to fix please.I cant boot with out using -v npci=0x2000

And my processor is not displaying proper information (unknown)I did add theSMcputype1281 into Smbios.plist

Sounds working system is fast thanks rampagedev


You are using my Extra folder I provided?


Yes I did, it causes me a boot to black screen, About this mac is working now, my edit didnt save the firsttime. Im not using Chimera just the loader does that make a difference?Thanks some more


Black screen is because I do not use GraphicsEnabler=Yes in my boot.plist.

Kevin Lepp (@kevinlepp) says:December 10, 2012 at 12:39 am

That did it thanks you deserve support as well I will helping out.CheersKevin


No problem. Glad I could help. Thank you a head of time for your support.

Luis says:December 8, 2012 at 8:21 pm

I have the same problem I try to instal the DSDT is not working for me,In the last step in the Kexts folder are 4 files, the pic from Multebeast,



the APPLEHDA, VOODOOTSCSYNC, AHCIPORTINJECTOR, the problem is i follow the photo configuration but i dontknow what to do with the other files.Thanks for u help.aaaaa my pc is working whit ML 10.8Thanks againR4EI7 3930evga Geforce 660 ti 3gb

Reply


You skipped over this part on the Asus x79 support page:

https://rampagedev.wordpress.com/dsdt-downloads/how-to-install-dsdt/

Dont forget to donate!

Reply


For sure man(:I follo the steps but in Multibeast configuration i am no selecting any audio drive, i am donig the same as the picture!!!Is that correct?

Reply


Correct. You must use that AppleHDA in the DMG. Also make sure you get the DSDT for your system installed inyour extra folder from the DMG as well.

Reply


Hey man Thanks for all your help.after a couple ML installations I finally, I think I have a good installation, I dont use any Flag to get in the ML thatsawesome, i use your guide of the DSDT, I use the MultiBeast Installation, for some reason every time I try to use MYHACKdidt work.all the usb ports are working ( i didt try the ones in the back yet).I dont know about the SATA ports..The Video Card well is working but i need to tested with some pro software. (Final Cut Pro, Avid media Composure, Aftereffects, premier etc)So The only problem now is I dont have any AUDIO, in the sounds preferences says no INPUT or OUPUT DevicesFound????Can you please help me with this problem Please????



PD Excuse my English(:

Rampage IV ExtremeI7 3930Geforce 660 TI 3GBBallistix By Crucial 32GB RAM (48)OCZ Agility 120GB For the SystemWD VelocyRaptor 500GBThanks again for your help!!!!

Reply


Your missing the DSDT and AppleHDA from the DMG. I can tell that you did not read any part of the Asus DSDTinstall guide. Also there is nothing wrong with myHack. You just needed to follow the set directions

Reply


I did ThisRead Me1. Drag the Extra Folder to the Macintosh HD Shortcut2. Authenticate using your password if necessary3. Go to the DSDT folder and find the appropriate DSDT and version and copy the DSDT 4. Double click onthe Macintosh HD Shortcut and open the Extra Folder5. Now paste the DSDT in the Extra Folder6. If this is a clean install make sure you install your kexts at this time7. Restart your ComputerHow to DonateIf you are interested in donating towards my blog you can via pay pal to: [email protected] you in advance for your donation and choosing my DSDT.

Your talking about point #6?how to install this ones?AppleHDA.kextVoodooTSCSync.kextAHCIPortInjector.kextThis tree files are locate in the ASUS.DSDT/KEXTS In redwen I open S/L/E/ i can see the files in there but still in red.I dont UnderstandSorry for all this Thanks.


Yes, remove the red kexts from S/L/E and reinstall them.

Luis says:



Pingback: Asus P9X79 LE Install problem

Pingback: Deep Thought: Water Cooled EVGA SR-2 Dual Xeon 5690 GTX 580 - Page 7

December 10, 2012 at 11:18 pm

Also I use KEXT Utility! to Install AppleHDA, VoodooTSCSync, AHCIPorttInjertor.

Reply

Yevgen Chupak says:December 27, 2012 at 9:26 am

Hi RampDev.

Can you please help me with my problem.

i had bought ASUS CU2 GTX 680 4GB to replace my 4870.

Once i do all according to your guide my monitor goes Sync out of range

I did use -v GraphicsEnabler = No CPURootUID = 0 npci=0x2000 (3000)

And still same result.

Thanks a lot for your help.

Yevgen.

Reply


What system is this for? Also you missed type almost everything in the video

Reply


Sorry

My Hardware:Asus P6t Deluxe v2I7 920 C010 GB Kingston 1800Sapphire 4870 1gbAsus GTX 680 4GB CU2

I know about typos Same result without that typos

Reply




-v npci=0x2000 cpus=1 GraphicsEnabler=No

Boot with that and report back.

Reply


Same

Yevgen Chupak says:December 27, 2012 at 12:30 pm

With GE=YES i can get just grey screen. Not Install Grey but just whitish gray.

And if i will plug my 4870 Install screen rase up without any additional flags. So problem is in GTX somewhere.

Btw. One week before this 4gb card i get 2gb card for tests. And with that Asus 2GB 680 there was no problems to install MLand all was just fine. And now if i will put this new 4GB card that ML install wont boot also. Its stuck at [PCIConfiguration...] no matter what flag i will put.

Reply

Yevgen Chupak says:January 2, 2013 at 8:11 pm

any ideas ?

Reply


No, not without spending more time with it

Reply


will donation help to resolve this ?


Well I would need to figure out what the issue is and what is causing it before I would consider that. If youhave time tomorrow email me and we can go from there.




Ok Thanks

Reply

Mark says:January 5, 2013 at 12:01 pm

Got as far as getting on a USB drive but HDD not showing up on to be Hackintosh help someone with step buy stepinstructions , Thanks in advanceMark

Reply


If you need assistance email me: [email protected]

Reply

Murilo says:January 9, 2013 at 7:39 pm

Hi there,I managed to install the Iatkos ML2 distribution. Everything was working quite well but with no video playback or sound.I decided to use one of your DSDT and go for a fresh install but in order to use the dsdt I had to upgrade my bios from rom tocap.After I updated it to the latest bios, I started getting a ebios read error 031 message and ML stopped working. Every time Itry a fresh install now It gets stuck as well.Do you have any idea why this could be happening and how can I fix the bios?____Mb: Asus p9x79 / bios 3203cpu: 3039kGc: EVGA 560

Thanks a lot for you time,

Murilo

Reply


Cosmetic. I have the same error pop up.

Reply

Stanca says:January 9, 2013 at 9:59 pm



rampagedev

I made a fresh install of Nireshs MAC OS X 10.8 Mountain Lion for any PC with everything working well but after update to10.8.2 the sound stopped working anymore despite the fact I reinstalled the working driver,voodoohda 2.7.2,for my GigabyteH61MA-D3V motherboard with Intel HDA/Realtek Azalia audio.

Reply


This is not the place for this. See premium tech support for one on one help with your system

Reply

The Twenty Ten Theme. Blog at WordPress.com.

os x 10

Documents