optimization and process automation using isight
TRANSCRIPT
OPTIMIZATION AND PROCESSAUTOMATION USING ISIGHT
DARMSTADT, 21 NOVEMBER 2019
SVEN REINSTÄDLER
AN INNOVATIVE SIMFLOW GENERATINGA DATA SHEET FOR A THERMAL BRIDGE
AGENDA
Thermal analysis• Motivation• Modeling• Characteristics
Isight workflow• Data management• Optimization• Postprocessing
THERMAL ANALYSIS: MOTIVATION
12/4/2019 3
Mould formation in
residential buildings
RELEVANT STANDARDS
DIN EN ISO 10211
Requirements to the temperature field along the inner surfaces of the walls
DIN EN ISO 6946
Building components and building elements – Thermal resistance and thermal transmittance – Calculation methods
Thermal insulation and energy economy in building; Supplement 2: Thermal bridges – Examples for planning and performance, with CD-ROM
DIN 4108 Supplement 2
Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
Building materials and products – Hygrothermal properties – Tabulated design values and procedures for determining declared and design thermal values
DIN EN ISO 10456
THERMAL ANALYSIS: MOTIVATION
12/4/2019 4
Accurate computation of the
required thermal energy
needed for heating a building
(primary energy consumption)
𝐿 =
𝑘=1
𝐾
𝑈𝑘 𝐴𝑘 +
𝑚=1
𝑀
𝜓𝑚 𝑙𝑚 +
𝑛=1
𝑁
𝜒𝑛
Classification of buildings
according to the German Energy
Conservation Regulation – EnEV
Keyword: Low-energy building
DIN EN ISO 10211-1 : 1995-11
LINEAR HEAT TRANSMITTANCE 𝜓
Thermal conductance
THERMAL ANALYSIS: MOTIVATION
12/4/2019 5
www.leitl.at/assets/upload/download/info/2016-01-14_Waermebrückenkatalog_Initiative_Ziegel_-_Zusammenstellung_GESAMT.pdf
THERMAL BRIDGE – DATA SHEET
THERMAL ANALYSIS: MOTIVATION
12/4/2019 6
www.leitl.at/assets/upload/download/info/2016-01-14_Waermebrückenkatalog_Initiative_Ziegel_-_Zusammenstellung_GESAMT.pdf
THERMAL BRIDGE – DATA SHEET
U-Wert Ziegelwand mit WDVS [W/m2K]
𝜓[W
/mK]
THERMAL ANALYSIS: MODELING
12/4/2019 7
Co
ncr
ete𝑅𝑠𝑖 = 0.13 𝑚2𝐾
𝑊𝑅𝑠𝑒 = 0.04 𝑚2𝐾𝑊
𝑞 = 0 𝑊𝑚2
𝑑𝐵 = 0.2 𝑚
𝑑𝐼 = ?
𝜆𝐶 = 1.6 Τ𝑊 𝑚𝐾
𝜆𝐼 = 0.04 Τ𝑊 𝑚𝐾
Iso
lati
onThermal resistance
𝑇𝑖 = 293 𝐾
Temperature
𝑇𝑒 = 263 𝐾
𝑇𝑠𝑖
Differential equation
Boundary conditions
𝑞 = ℎ (𝑇𝑠𝑖 − 𝑇𝑖)
𝑞 = ℎ (𝑇𝑒 − 𝑇𝑠𝑒)
𝑞 = 0
𝑞 = −𝜆 𝑇
Critical temperature
of the inner surface𝑇𝑠𝑖 ~ 283 𝐾
Point of condensation assuming relative humidity of 50 % inside the building
𝑥
𝑦
𝑙 = 0.6 𝑚
Temperature
Thermal resistance
MODEL EQUATIONS AND BOUNDARY CONDITIONS
OUTSIDE INSIDE
THERMAL ANALYSIS: CHARACTERISTICS
12/4/2019 8
𝑇 𝐾
𝑇𝑠𝑖 < 287.6 𝐾
𝑞 ∝ 𝑇
THERMAL IMAGE
ISIGHT WORKFLOW
12/4/2019 9
OVERVIEW - SIMFLOW
SELECTED COMPONENTS
Excel WordCommand Line Script Data Exchanger
Optimization
PostprocessingData management
ISIGHT WORKFLOW: DATA MANAGEMENT
12/4/2019 10
OS COMMAND
ISIGHT WORKFLOW: DATA MANAGEMENT
12/4/2019 11
DATA-EXCHANGER
ISIGHT WORKFLOW: OPTIMIZATION
12/4/2019 12
DATA-EXCHANGER
ISIGHT WORKFLOW: OPTIMIZATION
12/4/2019 13
python
Used modules:
• os
• csv
• re
SCRIPTING
ISIGHT WORKFLOW: OPTIMIZATION
12/4/2019 14
ABAQUS
ISIGHT WORKFLOW: OPTIMIZATION
12/4/2019 15
SCRIPTING
ISIGHT WORKFLOW: POSTPROCESSING
12/4/2019 16
SCRIPTING
ISIGHT WORKFLOW: POSTPROCESSING
12/4/2019 17
EXCEL
ISIGHT WORKFLOW: POSTPROCESSING
12/4/2019 18
EXCEL
ISIGHT WORKFLOW: POSTPROCESSING
12/4/2019 19
EXCEL-DATA-SHEET
ISIGHT WORKFLOW: POSTPROCESSING
12/4/2019 20
WORD
ISIGHT WORKFLOW: POSTPROCESSING
12/4/2019 21
WORD
ISIGHT WORKFLOW: POSTPROCESSING
12/4/2019 22
WORD-DATA-SHEET
ISIGHT WORKFLOW: POSTPROCESSING
12/4/2019 23
WORD-DATA-SHEET
𝐿 =
𝑘=1
𝐾
𝑈𝑘 𝐴𝑘 +
𝑚=1
𝑀
𝜓𝑚 𝑙𝑚 +
𝑛=1
𝑁
𝜒𝑛
THANK YOU FOR YOURATTENTION
SVEN REINSTÄDLERDr.-Ing.
+49 711 7825 [email protected]
CENIT AGIndustriestraße 52-5470565 Stuttgartwww.cenit.com