optical components our core competence
TRANSCRIPT
Optical components – our core competence
February 5, 2020 1
We are equipped with the full technology for production of optical components, starting from raw materials in block or rod shape on basis of nearly all existing optical glasses, fused silica, ceramics and crystals.
plane optics spherical optics coatings assemblies design & calculations
Products
• Single Lenses (CX, CC, Meniscus)
• Achromates and tripletts (cemented and air spaced)
• Cylindrical lenses
• Mild aspheres
February 5, 2020 3
Basic Technical Possibilities
• Range of diameter 3 – 300 mm
• Convex focus : up to 3000 mm Concave focus : up to -500 mm
• Holes
• Lens edging, odd shapes and special cuts
Examples of Applications
• Stripe Lenses for scanner technologies in Lithography
• Lenses for objectives, beam expander a.o.
• Small lenses for endoscopy
Performance
• Surface accuracy λ/10, with MRF up to λ/20
• Surface finish : 10-5
• Roughness : < 0.3 nm (rms)
Lenses
Products
• Windows, Brewster windows
• Wedges
• Plane parallel plates
• Filters
• Etalons
February 5, 2020 4
Basic Technical Possibilities
• Diameter or edge length : 3 – 300 mm
• Special cuts
• Holes
Examples of Applications
• Camera windows
• Scanner mirror substrates
• Beam splitter plates
• Compensation plates
Performance
• Surface accuracy λ/10, with MRF up to λ/40
• Surface finish : 10-5
• Roughness : < 0.2 nm (rms)
• Parallelism : up to < 1‘‘
Flat Optics
Products
• Reflection and dispersion prisms
• 90°-prisms, 60°-prisms
• Special prisms : Bauernfeind, Roof, Amici, Pellin-Broca
• Pentaprisms, Tripelprisms
February 5, 2020 5
Basic Technical Possibilities
• Edge length : 4 – 100 mm
• Prisms with inner angles
• Special cuts
Examples of Applications
• Cavity prisms
• Prisms for endoscopy
• Periscopes
Performance
• Surface accuracy λ/10, with MRF up to λ/20
• Surface finish : 10-5
• Roughness : < 0.2 nm (rms)
• Angle accuracy : up to < 5‘‘
Prisms
Products
• Plane and spherical mirrors
• Metallic coated (Al, Ag, Au)
• Dielectric coated
February 5, 2020 6
Basic Technical Possibilities
• Diameter or edge length : 3- 500 mm
• Cutted corners or special phases
• Holes
Examples of Applications
• Scanner mirrors
• Stripe mirrors for lithography
• Laser applications
• Al mirrors for UV-application
• Gold mirrors in IR spectroscopy
Performance
• Surface accuracy λ/10 with MRF up to λ/20
• Surface finish : 10-5
• Roughness : < 0.3 nm (rms)
Mirrors
Products
• Dielectric polarizers (plate or cube)
• Crystalline polarizers (e.g. Rochon, Wollaston) made from quartz, calcite and MgF2
• Retardation plates (multiple and zero order)
February 5, 2020 7
Basic Technical Possibilities
• Diameter or edge length :
3 – 20 mm
Examples of Applications
• Laser applications
Performance
• Surface accuracy λ/10
• Angle accuracy : up to < 5‘‘
• Surface finish : 10-5
• Roughness : < 0.2 nm (rms)
• Retardation tolerance : up to λ/200
Polarizers and Retardation Plates
Products
• Objectives
• Microscope optics
• Laser beam expander
• Telescopes
• Zoom modules
February 5, 2020 8
Basic Technical Possibilities
• Diameter pf lenses :
4 – 100 mm
Examples of Applications
• Laser applications
• Lithography
• LIDAR
Performance
• Surface accuracy λ/10
• Surface finish : 10-5
• Roughness : < 0.3 nm (rms)
Optical Assemblies
Products
• KD*P Pockels cells
• LiNbO3 Pockels cells
• Q-switch driver
February 5, 2020 9
Basic Technical Possibilities
• Spectral range for KD*P : 350 – 1500 nm
• Spectral range for LiNbO3 : 400 – 4500 nm
• Contrast ratio up to 1000:1 (KDDP) and up to 200: (LiNbO3)
Examples for Applications
• Laser beam modulation
• Q-switch (cavity dumper)
• Phasenmodulation
• Shutter function
• Pulse picker
Performance
• Surface accuracy λ/10
• Surface finish : 10-5
• Roughness : < 0.2 nm (rms)
Laser Modulators
Metallic • Aluminium, Silver and Gold • with protection (e.g. MgF2, SiO2,
Y2O3)
Dielectric • AR (e.g. V-type, BB and 2-Point) • HR (e.g. 532 + 1064 and > 70 % for
red pilot laser) • Edge filter • Beam splitter (intensity, polarization)
Graded coatings (filters, mirrors)
February 5, 2020 10
Thin film coatings features:
• low absorption antireflection coatings for use in high-power lasers
• low absorption HR coatings
• femtosecond optical coatings
• very dense and stable coatings
Thin Film Coating
Laser mirror AOI=45 deg
Cube polarizer
QED Q-flex 300
• Surface flatness PVr: up to λ/80 @633 nm
• Radius: approx. 1 - 3 µm
• Surface irregularity PVr: up to λ/40 @633 nm
• Roughness: 0.3 - 0.4 nm (Sq)
• Diameter up to 300 mm
• Mild aspheres
February 5, 2020 11
MRF (MagnetoRheological Finishing)
PVr = 16nm RMS=2.2 nm Zerodur Φ100 mm RoC = 1.6 m
PVr = 8 nm RMS = 1.2 nm Zerodur Φ60 mm plano
Precision opto-mechanical assemblies with full „as built“ characterization capability
February 5, 2020 12
Precise moun-ting of optical systems
Technology Tilt Shift
Drop-in-assemby 5´ 50 μm
Opti Centric Alignment 1´ 20 μm
• starting from requirements
• in house standard designs/ external consultant
• complex designs
• design-to-manufacture
• optical design imaging/illumination
• optical tolerancing, Monte Carlo
• stray light
• opto-mechanical design
• documentation acc. to ISO 10110
February 5, 2020 13
Optics design & analysis abilities
February 5, 2020 14
Measuremet capabilities
Parameter Measurement device Accuracy
Dimension Measurement microscope, Micrometer, 3D CMM
1 µm MPEE<(1.5+L/250) µm
Angle Goniometer 1 arcsec
Parallelism Interferometer, Autocollimator
0.1 arcsec 0.2 arcsec
Surface irregularity Zygo Verifire Interferometer λ/50 PV for flat λ/50 PV for spherical
Centricity Opticentric 3D 0.1 µm
Radius / Focus Interferometer + ROC slide 3 µm
Surface Finish Microscopes, reference pattern 10-5
Roughness WLI Profilometr 0.05 nm
Retardation phase shift measurement device – IAO1
λ/200 @500 nm
Spectral characteristic Spektrofotometer LAMBDA 950 Perkin – Elmer
1 nm
15
And what we can do for your light beams ?
Multiple beam recombiner for Laser Fusion Experiment