optical adhesive & dispensing solutions · refractive index curing conditions uv intensity time...

$: Optical Adhesive & Dispensing Solutions · Refractive Index Curing Conditions UV Intensity Time Tg Shrinkage Hardness Bond Strength mPas @ 589nm mW/cm² min °C % Shore D kgf/cm²$
Adhesives for Optical Path Link-up Adhesives for Array Assemblies High Precision Adhesives High/Low Refractive Index Adhesives Sealant for Optical Parts Remote controlled Curing Oven UV solutions for curing applications Optical Waveguide Formation Resin Dispensing Solutions

Optical Adhesive & Dispensing SolutionsStrong bonds to glass, metal, ceramics and plasticsDispensing Units and Accessories for Fiberoptics Patchcord Production

Rev. 09-16-03 Optical Adhesive Solutions

OPTICAL TECHNOLOGIES

Optical Technologies Power Technologies Thermal Management

Optical, Power and Thermal Management Technologies represent

the biggest technological challenges facing any engineer.

Our three key competencies Optical, Power and Thermal

Management have no logical bits and bytes, nor industry

qualifi cation standards. Hence the design of a system and the

choice of the right technology, supplier and products can only be

based on knowledge and experience in those fi elds.

There are manifold fi elds of applications in our key markets

Medical

Industrial

Renewable Energies

Research & Scientifi c

Defence & Aerospace

where we serve

AMS Technologies has built a comprehensive knowledge base in

those three key competencies, enabling us to provide customers

with complete solutions. Over and above the mere product support

for standard products, our solutions can include:

The development together with the customer of specifi cation

sheets for customized components, subsystems, modules and

systems, all based on customer needs

Effective project management of any customized product

development

Higher level design services for system-level prototypes

Interdisciplinary system-level integrated design comprising all

three key competencies:

Optical, Power and Thermal Management Technologies

Appropriate subcontractor selection and production support

for system-level integration

Proper vetting of technologies and suppliers

Simulations and modeling of system-level designs

Installation, training and servicing of equipment and

instrumentation

AMS Technologies’ solution approach has helped hundreds of customer projects to move from concept to production.

Helping you to understand our capabilities, we invite you to browse a list of the many projects that we have successfully

completed over a timeframe closely approaching 30 years.

OUR SOLUTION APPROACH

OEM customers with Consulting Designing Prototyping Validating/Testing Turnkeying

Endusers B2B with Demonstrating Installing Training Servicing Repairing

AMS Technologies is Europe’s leading solution provider and distributor

for Optical, Power and Thermal Management Technologies

AMS Technologies is a leading solution provider and distributor of high-

tech, leading-edge components, systems and equipment, with more

than 30 years of experience to date and currently serving more than

2000 European customers.

We are the specialists in both componentry and complete solutions

for Optical technology, Thermal Management and Power Technology

fi elds, with access to and long standing relationships with the most

advanced manufacturers in each of those fi elds. Drawing extensively

on our experience in each of these differing technologies, and coupling

this with our broad system-level competence, we are able to offer

seamless and comprehensive solutions incorporating complementary

aspects from all three key technology fi elds.

With an appropriate technical education, an element of entrepreneurial

spirit and many years of design and consultancy expertise, our sales

engineers can rapidly comprehend system requirements and provide

you the customer with a solution that goes way beyond a simple

understanding of our product datasheets. We take active involvement

in the design cycle, defi ning and re-defi ning your specifi cations, and

leading in many cases to highly specifi c, customized products and

solutions. Helping you to effectively outsource your production line,

we can even provide you with the necessary leading turnkey contract

manufacturing services in our key competency fi elds.

AMS Technologies has been delivering solutions into a variety of

high-tech markets, including renewable energies, medical, defence &

aerospace, research & scientifi c and various other industrial segments.

Our customer base consists of Europe’s largest leading technology

corporations, a network of universities and research institutes as well

as the most promising start-ups.

We thrive by working in a ‘customer fi rst’ environment. Our pan-

European customers are serviced from a network of local offi ces in

Germany, the UK, France, Italy, Spain, Poland and Sweden, with a

focused operations and logistics centre located in Munich, Germany.

Our commitment: Identifying the best solution for your project enabling

you to become your customers’ fi rst choice!

Your AMS Technologies team

For more than 30 years, we at AMS Technologies have been supporting the European market with leading, innovative

technologies and products that have allowed our customers to take prime position in their chosen markets.

WHERE TECHNOLOGIES MEET SOLUTIONS

Gluing is an essential technological process in many industrial technologies. The state-of-the-art adhesives are especially designed to meet the wide range of applications, while highly specialized. They are simplifying bonding processes, guaranteeing high processing speed combined with high reliability.

They are used for bonding of optical components where the adhesive is index matched to the components which has to be glued together. Special glues are developed to fi x fi ber in v-grooves. The refractive index is precisely controlled and can vary from low to high realizing a perfect optical match of materials.

Another group of adhesives is designed for sealing of optical components. To improve long-term reliability in mechanical protection and moisture prevention, optical devices are housed in protective cases of metal, plastic, etc. The reliability, especially in moisture resistance, of optical parts is greatly infl uenced by the characteristics of the sealant used for the openings and case junctions of the protective cases in the devices.Curing conditions can be different, using either heat or UV light to reach the maximum on bonding power.

All adhesives shown in this brochure provide• fast cure• strong bonds to glass, metal, ceramics and plastics• low shrinkage • low stressAMS Technologies is distributing the products of two optical adhesives suppliers NORLAND and NTT-AT, covering with their portfolio most of the applications.

Optical Adhesives for glass, metal, ceramics and plastics

NTT-AT Optical Adhesives Lineup

Adhesives / Resins and Sealants for Optical Component Assembly

●

●

Method of Measurement

Metal halide lamp (Center wavelength 365 nm)Conditions as described in the Instruction manualAbbe refractometer (at 25℃)E-type viscometer (at 25℃)Maximum peak temperature of viscoelastic spectrum tanδ

Measurement Item

Light sourceHeat-treating

Refractive indexViscosityGlass transition temperature

Uv curingcondition

Method of Measurement

UV Spectrophotometer (Sample thickness 1mm)Hardness meterTMA (Thermomechanical analysis)Calculated from the difference in density before and after curingTransmittance measuring instrument (Sample thickness 0.5mm)Time for confirmation of fluid flow to ø3mm SUS tube

Measurement Item

Optical transmittanceHardness (Shore d, a)Thermal expansion coefficientShrinkage during curingWater vapor transmission ratePot life

Refractive index, Optical transmittance, AbsorbancePermittivity, ResistivityBond Strength, Viscoelasticity etc.

The Optical characteristicsThe Electrical characteristicsThe Mechanical characteristics

Thermal expansion coefficient, Thermogravimetric analysisViscosity, Density, Shrinkage during curing etc.Longevity tests, Durability tests

The Thermal characteristicsThe Material characteristicsVarious environmental tests

■

■

Flow Chart: Selecting Optical Waveguide Adhesives Based On Application Usage

Measurement Item and Method of Measurement used for this Catalog

Measurement and Testing Services for Adhesives

Custom Adhesives, Measurement and Testing Services for Adhesives

Feel free to contact us if you have any questions about adhesives, requirements of custom adhesives,and measurement and testing services for adhesives.

Is Refraction IndexAdjustment needed?

YES NO

<1.47 >1.57

Refractive IndexRange 1.47-1.57

Is RefractionAdjusted for

Quartz?

Is Durability(on join surface)

an issue?

Is Durability(on join surface)

an issue?

Refractive Index

Custom Adjusted HighRefractive Index Type※

YES

YES

GA700LGA700H

NO

NO

YES(Large)

Adjustable RI Series(Low-Tg type)

※Adjustable Viscosity and Tg (Glass transition temperature)

NO(Small)

YES(Large)

NO(Small)

Adjustable RI Series(High-Tg type)

Custom Adjusted LowRefractive Index Type※

Notes: • All company names, product names, etc., indicated herein are trademarks or registered trademarks of each respective company.• Please understand that all comments and data recorded herein may be subject to change without prior notification.• Catalog descriptions: as of July, 2015

AT6001AT8224

LOWHIGHGlass Transition

Temperature

Usage Examples:

Cross-section view of V-type groove Adhesive used for Array Assembly

temperature

Tg

Optical

transmittance

[1.3um]

88% 86% 92% 89% 62% 20%

Bond

Strength

(kgf/cm2)

>181 >181 >202 >129 >146 >200

Special

Features

•Highly heat

resistant.

•Can grind

mechanically.

•Can grind

mechanically.

•Low

viscosity.

•Can grind

mechanically.

•Can grind

mechanically.

•High Tg.

•High

durability.

•Non-

liquidity.

•High

durability.

•Non-

liquidity.

•High Tg.

*1 : Na-D line after hardening.

*2 : Content product is "Non-medical use, deleterious substance" (Please refer to MSDS for handling.)

[Usage Examples] Cross-section view of V-type groove

[Usage Examples] Adhesive used for Array Assembly

temperature

Tg

Optical

transmittance

[1.3um]

88% 86% 92% 89% 62% 20%

Bond

Strength

(kgf/cm2)

>181 >181 >202 >129 >146 >200

Special

Features

•Highly heat

resistant.

•Can grind

mechanically.

•Can grind

mechanically.

•Low

viscosity.

•Can grind

mechanically.

•Can grind

mechanically.

•High Tg.

•High

durability.

•Non-

liquidity.

•High

durability.

•Non-

liquidity.

•High Tg.

*1 : Na-D line after hardening.

*2 : Content product is "Non-medical use, deleterious substance" (Please refer to MSDS for handling.)

[Usage Examples] Cross-section view of V-type groove

[Usage Examples] Adhesive used for Array Assembly

AMS Technologies | Optical Technologies

4 Optical Adhesives for glass, metal, ceramics and plastics

Viscosity 25°C Refractive Index

Curing Conditions UV

IntensityTime Tg Shrinkage Hardness Bond Strength

mPas @ 589nm mW/cm² min °C % Shore D kgf/cm² 400nm 850nm 1330nm 1550nm

AT3925M 200 1.519 100 10 219 3 88 >99 65 90 91 89

AT9390 600 1.492 30 10 131 4 81 >194 45 92 91 89

AT9968 70 1.512 100 10 181 4 85 >143 74 90 90 85

AT3727E 400 1.573 10 10 107 4 83 >147 63 89 89 87

AT3728E 400 1.573 10 10 55 3 20 >232 80 89 90 88

AT9575M Paste - 100 10 42 4 35 >221 29 71 80 79

AT8105 Paste - 10 5 103 7 78 >226 0 0 0 0




mPas @ 589nm mW/cm² min °C % Shore D kgf/cm² 400nm 850nm 1330nm 1550nm

#18165 9 1.675 10 5 113 9 67 >48 90 96 96 94

#18166 900 1.660 10 5 161 5 80 >51 90 96 95 93

#6205 18 >1.70 100 5 68 8 70 35 21 69 81 88

E3754 1.150 1.603 100 5 73 5 76 >280 64 86 92 94

#7200 11.000 1.627 100 10 63 3 83 55 89 95 96 95



IntensityTime Tg

mPas @ 633nm mW/cm² min °C 450nm 540nm 630nm#18210 with solvent 15 1.720 100 5 100 94 95 95

#18213 no solvent 380 1.660 100 5 100 86 87 88

Viscosity 25°C UV Intensity Time Tg Shrinkage Hardness Bond Strength

mPas mW/cm² min °C % Shore D kgf/cm²

AT3862P 180.000 100 2 195 0.5 93 >210

AT3916P 36.000 100 2 233 0.9 91 >220




mPas @ 589nm mW/cm² min °C % Shore D kgf/cm² 400nm 850nm 1300nm 1330nm 1550nm

Low-Tg Type 200-560 1.445-1.549 10 10 40-50 4-8 23-45 86-90

High-Tg Type 250-2000 1.446-1.547 30 10 140-150 3-5 75-78 89-90

GA700H 280 1.458 30 10 145 4 80 >247 72 92 91 88

GA700L 250 1.456 10 5 46 4 44 >154 82 94 94 92

AT6001 470 1.505 10 5 0 7 24 >99 87 93 91 86

AT8224 145 1.505 10 5 115 9 38 >209 72 86 89 82



IntensityTime Tg Hardness

mPas @ 589nm mW/cm² min °C Shore D 450nm 540nm 630nm

#18204 7 1.375 10 1 18 20 89 91 91#18114 25 1.400 10 5 94 72 92 94 94E3810 100 1.438 10 10 103 78 76 86 89

Tg Hardness

A B Appearance A Appearance B °C Shore D

OS5958 Epoxy Amine White/Paste Yellow Clear Liquid 45 47

OS5962 Epoxy Amine White/Paste Yellow Clear Liquid 49 66

OS-48 Polyisobutylene Polyisobutylene White/Paste White/Paste -46 66

24h at room temperature or 1h at 80 °C

UV-curable Precision Adhesive

High Refractive Index Series – with nanofiller

Sealant for Optical Devices

Main Component Color Condition

Optical Transmittance

Low Refractive Index Series


Curing Conditions

UV-curable Adhesive for Optical Path


UV-curable Adhesive for Fiber Array


High Refractive Index Series


NTT-AT Index Matching Liquids

Type Description Cure Type Glass Metal Plastic Color Viscosity at 25° C Refractive Index Modulus PSI Tensile PSI Elongation at

FailureShore D

Hardness

NOA 60 General purpose adhesive for bonding doublets, prisms or mounting components. UV NOA 60 ★★ ★★ ★ Clear 300 CPS 1.56 135,000 2,800 35% 81

NOA 61 Preferred adhesive for military optics. Meets MIL-A-3920. Used for optics exposed to temperature extremes. Low shrinkage. UV NOA 61 ★★★★ ★★★★ ★ Clear 300 CPS 1.56 150,000 3,000 38% 85

NOA 63 Cures well in thick sections. Use as fillet bond to hold lenses in place or for bonding where low fluorescence or good transmission in range is required. UV NOA 63 ★★ ★★ ★ Clear 2.500 CPS 1.56 240,000 5,000 6% 90

NOA 65 Flexible adhesive suitable for low strain applications or for cold blocking of lenses. UV NOA 65 ★★ ★★ ★ Clear 1.000 CPS 1.52 20,000 1,500 80% 50

NOA 68 Flexible adhesive for glass or plastics such as polycarbonate, CAB or acrylic. UV NOA 68 ★★★★ ★★ ★★★ Clear 5.000 CPS 1.54 20,000 2,500 80% 60

NOA 68 T Screen printable flexible adhesive for glass and plastics such as polycarbonate, CAB and acrylic. UV NOA 68 T ★★★★ ★★★★ ★ Clear 22.000 CPS 1.54 N/A N/A N/A 50

NOA 71 Provides a strong bond to glass surfaces and has excellent clarity for light guides and other applications. UV NOA 71 ★★★★ ★★★★ ★ Clear 200 CPS 1.56 55,000 1,300 43% 86

NOA 72 Low viscosity adhesive for bonding glass or plastics such as polycarbonate, CAB or acrylic. Cures with UV or visible light. UV/VIS NOA 72 ★★★★ ★★ ★★★ Clear 155 CPS 1.56 2,400 500 34% 75

NOA 73 Flexible adhesive with low viscosity for bonding delicate parts. UV NOA 73 ★★★★ ★★ ★ Clear 140 CPS 1.56 1,600 200 16% 60

NOA 74 Low viscosity UV curing adhesive recommended for bonding glass and plastics. This adhesive has excellent adhesion to CAB. UV NOA 74 ★★★★ ★★ ★★★ Clear 80–95 CPS 1.52 2,900 217 10% 30

NOA 75 Low viscosity UV and visible light curing adhesive recommended for bonding glass to plastic and plastic to plastic. UV/VIS NOA 75 ★★★★ ★★ ★★★ Slight Yellow Tint 80–95 CPS 1.52 26,100 164 7% 25

NOA 76 High viscosity adhesive for bonding glass to plastic. Cures with UV or visible light. UV/VIS NOA 76 ★★★★ ★★ ★★★★ Clear 4.500 CPS 1.51 970 450 47% 60

NOA 78 High viscosity adhesive for bonding plastictoplastic. Cures with UV or visible light UV/VIS NOA 78 ★★★★ ★★ ★★★★ Yellow Tint 9.000 CPS 1.50 1,140 649 57% 55

NOA 81 Fast curing adhesive for tacking or bonding. Excellent adhesion to glass or metal. Produces a hard, resilient bond UV NOA 81 ★★★★ ★★★★ ★ Clear 300 CPS 1.56 200,000 3,000 25% 90

NOA83H Fast curing adhesive that will cure with UV or heat for tacking or bonding UV opaque materials UV/Heat NOA83H ★★★★ ★★★★ ★ Clear 250 CPS 1.56 160,000 3,500 30% 85

NOA 84 Low refractive index adhesive for bonding glass UV NOA 84 ★★★★ ★★★★ ★ Clear 40–75 CPS 1.46 N/A N/A N/A N/A

NOA 88 Low outgassing adhesive for aerospace or electronic applications. Excellent transmission in UV range UV NOA 88 ★★★★ ★★★★ ★ Clear 250 CPS 1.56 112,000 1,900 43% 90

NOA 89 Low viscosity adhesive for coatings and bonding delicate parts UV NOA 89 ★★★★ ★★★★ ★ Clear 20 CPS 1.51 N/A N/A N/A 40

NOA 85 Low refractive index (1.46), low viscosity (200cps), recommended for bonding plastics and glass UV NOA 85 ★★★★ ★★ ★★ ★ Clear 200 CPS 1.46 9,340 1,500 111% 40

NOA 85V Low refractive index (1.46), low viscosity (200cps), visible light curing adhesive recommended for bonding plastics that absorb UV light UV NOA 85V ★★★★ ★★ ★★ ★ Clear 200 CPS 1.46 9,340 1,500 111% 40

NOA 86 Low viscosity, UV and visible cure adhesive that meets the Bellcore specifications of 85C/85RH for 2000 hours UV/VIS NOA 86 ★★★★ ★★ ★★ ★ Clear 200-300 CPS 1.55 360,400 7,834 2.8% 75

NOA 86H Low viscosity, UV, visible and heat cure adhesive that meets the Bellcore specifications of 85C/85RH for 2000 hours UV/VIS and or heat NOA 86H ★★★★ ★★ ★★ ★ Clear 200-300 CPS 1.55 360,400 7,834 2.8% 75

NOA 87 Higher viscosity and meets the Bellcore specifications of 85C/85RH for 2000 hours UV/VIS NOA 87 ★★★★ ★★ ★★ ★ Clear 900-1.500 CPS 1.52 209,700 4,880 13% 50

NOA 1315 Low viscosity adhesive with a refractive index of 1.315 for bonding plastic and glass UV/VIS NOA 1315 ★★★★ ★★ ★★ Clear 15 CPS 1.315 N/A N/A N/A N/A

NOA 132 Low refractive index adhesive (1.32) for bonding glass or plastic UV/VIS NOA 132 ★★★★ ★★ ★★ Clear 15 CPS 1.32 N/A N/A N/A N/A

NOA 1327 Higher viscosity low refractive index adhesive for bonding glass or plastic UV/VIS NOA 1327 ★★★★ ★★ ★★ Clear 4700 CPS 1.327 N/A N/A N/A 15

NOA 1328 High viscosity low refractive index adhesive for bonding glass or plastic UV/VIS NOA 1328 ★★★★ ★★ ★★ Clear 2400 CPS 1.328 N/A N/A N/A 15


NOA 13685 Low refractive index adhesive (1.3685) for bonding glass or plastic UV NOA 13685 ★★★★ ★★ ★ Clear 15-25 CPS 1.3685 N/A N/A N/A N/A





NOA 148 Low refractive index adhesive (1.48) for bonding glass to glass UV NOA 148 ★★★★ ★★ ★ Clear 1.500-2.000 CPS 1.48 N/A N/A N/A N/A

NOA 162 Higher viscosity high Refractive index adhesive for bonding glass UV NOA 162 ★★★★ ★★ ★★ Clear 4800 CPS 1.62 N/A N/A 48.6% 10

NOA 1625 High refractive index adhesive (1.625) for bonding glass to glass UV NOA 1625 ★★★★ ★★ ★ Clear 60-80 CPS 1.625 N/A N/A 27.7% 29


NOA 170 High refractive index adhesive (1.70) for bonding glass to glass UV/VIS NOA 170 ★★★★ ★★ ★★ Clear 4800 CPS 1.70 863 90,200 1.3% 75

Fair ★

Good ★★

Good to Excellent ★★★

Excellent ★★★★

Norland Index Matching Liquids




FailureShore D

Hardness







































Fair ★

Good ★★




FailureShore D

Hardness







































Fair ★

Good ★★



cont. Norland Index Matching Liquids

Optical Adhesives for glass, metal, ceramics and plastics 7

Remote controlled Curing Oven

The 1Cure™ is the fi rst curing oven for MT and single mode fi bers that can be remotely controlled. The 4” full color LCD touch-screen

enables to set up and adjust the temperature. The temperature monitoring at the actual connector fi xture eliminates temperature

error. The 1Cure™ can be used for both horizontal (MT) and vertical curing applications. It features network connectivity with remote

programmability and access, and stores up to 999 programmes.

Key features:

Remote monitoring and programming of ovens

IT networkable

Touch screen interface

MT or Single-Fiber curing

Flat to angled internal tilt for horizontal curing

Application:

Cable Assembly Fabrication

Data Center

Telecom, Central offi ce

CATV, Head ends

Medical, Military, Specialized

Password protected user mode

4.3” Color touchscreen interface

Alerts by text or email to assembler

All user actions and alarms recorded into audit fi le

User friendly icon or menu driven

Store up to 999 programs

Alerts for Alarms and Notifi cations

Multilingual – up to 27 different languages

Programmable, Full Color, Touch Screen Command Center

The ramp cure technology is for elimination of fi ber cracking

especially on larger core fi bers by utilizing ramp and soak cycles.

This signifi cant advancement is useful for large core and multi-

fi ber applications. It also allows for the potential to standardize

on one epoxy for various applications by customizing time and

temperature profi les.

Active alerts including automated text messages and emails

may be sent to production or technical staff when the curing

cycle ends or if there are any notifi cations. A multilingual

password protected interface provides worldwide versatility

and enhanced security for editing and changing profi les. The

oven features a horizontal curing base with a removable 24

position fi xture for MT (MPO) and a convertible lid providing

cable access to a block to accommodate up to 96 single fi ber

termini (72 for the 1Cure-200) to cure in a vertical position. The

internal 15 degree tilt mechanism for the horizontal cure will

allow for 0 or 15 degree curing angle to prevent fi bers from

retreating during bare, buffered or ribbon fi ber applications.



UV LED spot curing system at 365nm

A powerful, fl exible and easy-to-use UV LED spot curing system for a wide range of curing applications.

As the control system is directly integrated into the body

of the UTARGET, the irradiance of the UV LED head can be

adapted quickly and easily.

The UV LED head has been uniquely designed to create

an infi nite range of spot sizes so the user can choose the

position of the optic to perfectly fi t the size of the spot.

The max irradiance of the 365nm version is 1400mW/

cm2 with an electrical power input of around 4W.

The UV Curing Kit contains the UTARGET product, a power

supply adapter, a desk holder and safety glasses.

LED Irradiation up to 8000 mW/cm2

Wavelength 365, 385, 395 or 405 nm

Adjustable optical system

UV cabinet for curing applications

Compact UV irradiation chamber for laboratory uses or

for short run production.

Thanks to a digital controller the UV light power can be

fi xed between 0% and 100%, and also the insolation

time can be defi ned between 1sec and 100min.

An intelligent security system between the lamp and the

door avoids unwanted UV light exposure by cutting off

the UV light if the door is open during insolation.

More than 90% homogeneity

Wavelength 365, 385, 395 or 405 nm

Easy-to-use Plug&Play solution

Applications:

bonding, fi xing or encapsulating components in the

electronic, optical or medical fi eld

intense UV irradiation in the biological, chemical and

pharmaceutical sectors


Dispensing Units and Accessories for Fiber optics Patchcord production

The dispensing systems from MUSASHI are used in numerous industrial

processes, such as automotive, cable assembly, optical module manufacturing,

electronics, solar cell manufacturing and medical technology. A large choice of

consumables, like syringes, nozzles and adapter hoses cover all customer needs.

When handling liquid materials process parameters like stability, fl ow volume

and the curing profi le of the used materials are of paramount importance.

Permanent monitoring and control of these parameters is essential to ensure

stable dispensing during the process, even with self-curing materials.

High precision systems optimize the production fl ow, lower the costs and maximize

throughput for electrical and electromechanical manufacturing sequences.

When used in medical applications Musashi’s solutions ensure absolute even

dispensing of UV curing adhesives, silicone, cyanoacrylate adhesives and other

liquid materials.

Manual dispenser for Syringes

Syringes & Syringe Holder

Adapter Tube for Pneumatic dispenser

Plunger & Needle for threaded syringe

Pneumatic syringe dispenser

Fluid material viscosity table

Air pulse dispenser (syringe, cartridge specifi cations)Air pulse dispenser (valve, tank)

Non-contact jet dispenser

Tubing type dispenser

High performance screw dispenser

High precision mechanical dispenser

Ultra-small dosage dispenser



Adhesive Injection Systems for Ferrules

The Shotmaster is an automated solution for dispensing adhesives into ferrules of

fi beroptic connectors.

The robot arm allows for precise positioning of the syringe needle in relation to the

ferrule hence avoiding later failure of connectors due to glue misplacement. The

integrated dispense system corrects for the glue changing its viscosity over time

hence making sure always same volume is injected in the ferrule. The Shotmaser is

the ideal solution for todays high volume high quality fi ber optic connector assembly

lines.

This robot is equipped with a high precision pneumatic dispenser that accurately

corrects for fl uctuations in the dose volume caused by changes in viscosity, such as

occur with twopart resin material.

Streamline the injection operation

Compatible with large variety of ferrule

Improve workability

Stabilizing adhesive spread

Temperature control by peltiert device

Stabilizing of quality

Injection step

Centrifugal bubble eliminator for syringes

This is bubble eliminator for removing bubbles

that are generated when fi lling material into

syringes by using centrifugal force. Simple

operation: Put a liquired-fi lled syringes in the

machine and press the switch. Two models are

avalable according to the syringe size. Clean

and simple bubble removal for various fl uids

such as epoxy resin and grease.

ML-808FX: High precision dispenser fl exible with viscosity changeStable dispensing of two-liquid type cure adhesive With the <auto increment function>, dispensing set conditions automatically switches step-by-step. With the <auto slope function>, the channel is set automatically just by inputting the start and end dispensing conditions.Variable line width at a constant drawing speed.Ideal for automation lines and centralized control from host computer because the RS-232C communication function is provided.


Germany AMS Technologies AGFraunhoferstr. 22 82152 Martinsried, GermanyPhone +49 (0)89 895 77 0

FranceAMS Technologies S.A.R.L. Silic 717 – Bâtiment Magnolia16, avenue du Québec 91961 Courtaboeuf CedexPhone +33 (0)1 64 86 46 00

ItalyAMS Technologies S.r.l. Corso Sempione, 215/B20025 Legnano (MI), ItalyPhone +39 0331 596 693

PolandAMS Technologies Sp. z o.o.Mogilska 69 St, Floor 231-545 Krakow, PolandPhone +48 (0)12 346 24 16

SPaInAMS Technologies S.L. C/Muntaner, 200 Atico, 4a 08036 Barcelona, SpainPhone +34 (0) 93 380 84 20

SwedenAMS Technologies NordicAzpect Photonics ABAminogatan 3443153 Mölndal, SwedenPhone +46 (0)8 55 44 24 80

UnIted KInGdomAMS Technologies Ltd. Unit 11, St Johns Business Park Lutterworth Leicestershire LE17 4HB, UKPhone +44 (0)1455 556360

[email protected]

© A

MS

Tech

nolo

gies

Rev

. 09-

16-0

3 Op

tical

Adh

esiv

e So

lutio

ns

enabling your ideas. Optical, Power and Thermal Management Technologies

optical adhesive & dispensing solutions · refractive index curing conditions uv intensity time...

Documents