online condition monitoring of high-voltage overhead power lines
TRANSCRIPT
Online Condition Monitoring of High-Voltage Overhead Power LinesBy: Prashanth G R USN : 2BV09EE039
Need for Online Condition Monitoring Sag of High-Voltage OH power lines may limit the
operability of power lines. Heavy loads due to icing or vibrations excited by the wind streams increase the risk of line breakage.
2
Dept. of Elecrtical & Electronics Engg., BVBCET
Basic Idea of Condition Monitoring System
3
Dept. of Elecrtical & Electronics Engg., BVBCET
Harvester Prototype It comprises of tube with a diameter of 30cm &
length 50cm. It is mandatory to eliminate sharp edges to avoid partial discharge. Donut-shaped objects are placed at the ends of the tubes.
4
Dept. of Elecrtical & Electronics Engg., BVBCET
Harvesting System
Cross Sectional View5 Dept. of Elecrtical & Electronics Engg., BVBCET
3-D Model
Schematic of Energy Harvester Circuitry
6
Dept. of Elecrtical & Electronics Engg., BVBCET
Experimental Setup & Results
7
Dept. of Elecrtical & Electronics Engg., BVBCET
Operability of Electronic Devices
8
Dept. of Elecrtical & Electronics Engg., BVBCET
Testing1.
High currents
2. Discharge & Transient Voltage
9
Dept. of Elecrtical & Electronics Engg., BVBCET
Communication to a Control Station System Requirements: It should collect data autonomously. It should provide the comprehensive view of
supervised line. Approaches for establishing communication link between monitoring system and control station: 1. Use of conductor for wire bound communication . (Outdated) 2. Wireless Communication system. (Present System)Dept. of Elecrtical & Electronics Engg., BVBCET
10
Conclusion
11
Dept. of Elecrtical & Electronics Engg., BVBCET
12
Dept. of Elecrtical & Electronics Engg., BVBCET