EVOTRAK

DELTRAK 2.5

QUATRAK

Radio

-contr

olled

1865

J. Rilling founded a production company for mills in Dusslingen. The corn mills and industrial coffee mills were delivered worldwide.

1928

The first worldwide type HM bar mower was developed by IRUS and awarded a patent in the same year. IRUS started motor engineering.

1953

IRUS introduced the single-axle machine U 600 into agriculture; in the following years, the types U 300, U 900 and U 1200 with ZF gears were built for universal use.

1968

The most successful mower of IRUS was the famous “MICKY”, with which IRUS managed to develop and produce an until then unknown small and lightweight mower.

thIn the same year, the 10,000 Micky left the plant in Dusslingen.

1985

IRUS got a new owner.The product series was adjusted to the current needs of customers.

1986IRUS presented a worldwide innovation: a bar mower with differential

lock, steering brakes and low-pressure Terra tyres - the KM 300.

2003

Start of the production of a new generation of hydrostatic carrier machines.The HYTRAK marked the beginning of a new era. At the demopark trade show in Fulda, the first radio-controlled machine of IRUS - KOMTRAK 25 - was pre-sented and awarded an innovation medal.

2004

With the KOMTRAK, IRUS presented the strongest single-axle machine of the world.

2005

Market introduction of the DELTRAK, the first radio-controlled flail-type mower with crawler-mounted running gear.

2008

IRUS celebrated 80 years of motor engineering. Innovations and quality for decades!

2011

Market launch of the QUATRAK, the first radio-controlled carrier machine with four-wheel drive and all-wheel steering.

DELTRAK

Micky

HM

KOMTRAK

KM 300

Company history

1

Unusual tasks require unusual solutions.In order to counteract scrub encroachment,

even the hardest to reach and landslide-threatened slopes must be kept free.

Compared to the previous practice with string trimmers or hand-operated single-

axle machines, these are some of the resulting crucial

advantages

Clear saving of costs compared to the previous use with string trimmers:One operator completes the work of several workers in the same time or as compared to hand-operated single-axle machines.The work speed is no longer controlled by the walking speed of the operator. This can cut the required working time in half.

Highest possible security:The operator is outside the danger zone.

Preservation of the operator's health:No climbing, no slipping, no getting stuck on branches, thorns and scrub, no vibrations on the beam, no exhaust fumes in the immediate vicinity, no load for the joints.

Why

radio-controlled?

2

DELTRAK 2.5- 38 PS diesel engine (Kubota)- hydraulic caterpillar drive- hydraulic device drive- carrier machine

3

Motor: KUBOTA 3-cylinder turbo diesel engine 27.5 kW (38.0 PS), water-cooled, electric start, operating hours counter, oil and temperature control

Cleaning fan:cleaning function for engine and hydraulic cooling

Drive:hydraulic crawler running gear with direct drive, proportional speed control for each crawler running gear via radio control, forward as well as in reverse, adjustment of the crawler running gears with rotary potentiometer on the hand-held transmitter (simplifies working on steep slopes)

Speeds:forward: 0 - 10 km/h | reverse: 0 - 10 km/hMaximum speed continuously adjustable via rotary potentiometer on the hand-held transmitter

Track width:1100 - 1250 mm (continuously adjustable)

Max. slope gradient:50° | 120% (depending on surface)

Radio range:approx. 200 - 300 m (visibility range)

Standard functions:- driving / steering (continuously adjustable, proportional)- engine start / engine stop- continuously adjustable control of the engine speed- continuously adjustable control of rotational speed and direction of rotation of the power take-off- horn- mirroring of the drive control- lifting of the accessory device

Optional functions:- control of ancillary hydraulic cylinders

Weight:approx. 820 kg

(base machine incl. crawler running gear; without accessory device)

Technical data

4

DE

LT

RA

K 2

.5

Motor:- powerful 3-cylinder Kubota turbo diesel engine

Engine swivelling:- engine swivelling to ensure optimal engine lubrication in the threshold

Cover:- completely covered for protection against branches and shrubs- covers can be opened without tools

Cleaning fan:- automatic cleaning function for hydraulics and engine cooling

DE

LT

RA

K 2

.5

5

DE

LT

RA

K 2

.5Crawler running gear:- delta gear- hardened drive and guide pulleys- mechanical, durable chain pull

Radio control:- proven radio technology- range up to 300 m- abdominal belt and should strap

Optional:- different crawler chains- hoop guard / 3-point suspension- front and rear LED work lights- circumferential light- lateral adjustment- NATO socket for the operation of high-current consumers (e.g. cable winches)- tilt switch

6

EVOTRAK

- 30 PS petrol engine (Kohler)- hydraulic caterpillar drive- hydraulic device drive- carrier machine

7

Motor: KOHLER 2-cylinder 4-cycle OHV

petrol engine 22.4 kW (30.5 PS), air-cooled, electric start,

operating hours counter

Drive:permanent hydraulic drive for

both crawler running gears, proportional speed control for

each crawler running gear via radio control, forward as well as

in reverse, adjustment of the crawler running gears with rotary

potentiometer on the hand-held transmitter (simplifies working on

the steep slopes)

Speeds:forward: 0 - 6 km/h | reverse: 0 - 6 km/hMaximum speed continuously adjustable via rotary potentiometer on the hand-held transmitter

Track width:1250 mm

Max. slope gradient:50° | 120% (depending on surface)

Radio range:approx. 200 - 300 m (visibility range)

Standard functions:- driving / steering (continuously adjustable, proportional)- engine start / engine stop- continuously adjustable control of the engine speed- switching the power take-off on and off- horn- mirroring of the drive control- lifting of the accessory device

Weight:approx. 640 kg

Technical data

EVOTRAK „Solar”- Design height: max. 70 cm- Special protection from stone chipping

8

EV

OT

RA

K

QUATRAK

- 30 PS petrol engine (Kohler)- hydraulic 4x4 wheel drive- all-wheel steering- hydraulic device drive- carrier machine

9

Motor: KOHLER 2-cylinder 4-cycle OHV petrol engine 22.4 kW (30.5 PS), air-cooled, electric start, operating hours counter

Drive: permanent hydraulic drive of all four wheels or spiked rollers, proportional speed control and steering via the radio control, forward as well as reverse, adjustment of the wheels via rotary potentiometer on the hand-held transmitter (simplifies working on the steep slopes)

Speeds: forward: 0 - 7 km/hreverse: 0 - 7 km/hMaximum speed continuously adjustable via rotary potentiometer on the hand-held transmitter

Track width:850 - 1400 mm (depending on tyres)

Max. slope gradient: 50° | 120% (depending on surface)

Radio range: approx. 200 - 300 m (visibility range)

Standard functions:- driving / steering (continuously adjustable, proportional)- engine start / engine stop- continuously adjustable control of the engine speed- switching the power take-off on and off- horn- mirroring of the drive control- lifting of the accessory device

Optional functions:- crab steering

Total weight:approx. 500 - 600 kg (depending on equipment and accessory device)

Technical data

10

QU

AT

RA

K

Motor:- modern 2-cylinder OHV 4-cycle petrol engine

Engine swivelling:- engine swivelling to ensure optimal engine lubrication in the threshold

Underbody protection:- complete underbody protection against damage from surface irregularities, rocks, root stocks, etc.

Compactness:- low design height, compact dimensions

11

EV

OT

RA

K / Q

UA

TR

AK

Crawler running gear: .

(only on EVOTRAK)

- delta gear- hardened drive and guide pulleys- mechanical, durable chain pull

All-wheel steering / drive: (only on QUATRAK)

- permanent 4x4 all-wheel drive with all-wheel steering- separate single wheel steering- very manoeuvrable and soil conserving

Optional:- crab steering (only on QUATRAK)

- different tyre variants (only on QUATRAK)

- different crawler chains (only on EVOTRAK)

- 3-point suspension (only on EVOTRAK)

- circumferential light- tilt switch

12

EV

OT

RA

K / Q

UA

TR

AK

Radio control:- proven radio technology- range up to 300 m- abdominal belt and should strap

Flail-type mower

- to mow grass and shrubs

- different blades and flails available

- height adjustment via castor rollers and skids

- high-performance belt drive

- optional: chain safety curtain

Safety mulcher

- to mow grass and shrubs

- worm shaft with replaceable tooth segments

- height adjustment via castor roller

- little stone chipping

High grass mowing device / swing mower

- to mow grass with a height of up to approx. 40 cm

- six pendulum blades: System ESM Verti-2-Flail

- height adjustment via skids or optional lead wheels

- optional: lead wheels + castor roller

EV

OT

RA

K

DE

LTR

AK

2.5

QU

AT

RA

K

125 / 1

45 c

m--

-

---

125 c

m125 c

m125 c

m105 / 1

25 c

m105 / 1

25 c

m105 / 1

25 c

m

Mowing/mulching

13

Disc mower

- to mow grass, e.g. if it has to be cleared or is intended for further use

- three or four mowing plates with two knife blades / pendulum blades each

- extensive grass cuttings tray

Front mower / side mower

- double-blade bar mower system ESM Bidux

- the bar can be swivelled to the front or completely to the side of the machine

- the bar can additionally be swivelled approx. 75° up and down, e.g. in order to mow ditches, for hedge trimming, etc.

- optional: hydraulic swivelling and lifting

Hay machine / belt rake

- to clear away the grass cuttings

- drive via two V-belts with controlled prongs

- lead wheels for height adjustment

- adjustable wheels for windrow forming

EV

OT

RA

K

DE

LTR

AK

2.5

QU

AT

RA

K

115 / 1

50 / 1

90 c

m--

-

---

145 c

m145 c

m145 c

m130 / 1

70 c

m130 c

m130 c

m

Mowing/clearing

14

Forest mulcher with stationary teeth

- for milling off shrubs, wood and root stocks

- carbide tipped cutting teeth

- for wood with up to approx. 10 cm Ø and root stocks with up to approx. 20 cm Ø

- front panel with hydraulic actuation

- vertical adjustment with skids

- optional: rigid/hydraulic push bar

Forest mulcher with swinging-through hammers

- for mulching shrubs and wood

- cage rotor with swinging through forest hammers

- for shrubs and wood with up to approx. 10 cm Ø

- front panel with hydraulic actuation

- vertical adjustment with skids

- optional: rigid/hydraulic push bar

Push bar

- rigid or hydraulic

EV

OT

RA

K

DE

LTR

AK

2.5

QU

AT

RA

K

125 c

m--

-

---

• ---

---

125 c

m--

-

---

Forest

15

Stump cutter / root stump grinder

- carbide tipped cutting teeth

- hydraulically rotatable to the left and the right

Chaff cutter

- for chaffing/cutting wood with a branch thickness of up to 90 mm Ø

- continuously adjustable draw-in rollers

- adjustable discharge chute

EV

OT

RA

K

DE

LTR

AK

2.5

QU

AT

RA

K

• ---

---

• ---

---

Forest

16

Reverse cutter

- for tilling/milling soil, lawn, etc.

- rocks or lawn soil are dug in

- depth adjustment via screen roller

Weed broom / weed brush

- for mechanical removal of weeds, e.g. on kerbs, border stones, cobblestones, etc.

- wire bundles can be replaced individually

- brush disc rotatable to both sides, tilt adjustable on two levels

- stone chipping protection

- optional: hydraulic adjustment

EV

OT

RA

K

DE

LTR

AK

2.5

QU

AT

RA

K

• ---

---

100 c

m--

-

---

Tillage

Weed removal

17

Zaugg hard snow thrower

- for clearing out hard and soft snow

- clearing height 70 cm

- steel scrape rail and skids

- casting direction and distance hydraulically adjustable

Snow plough blade

- for clearing out soft snow

- for snow heights of up to approx. 20 cm

- rubber scrape rail

- hydraulically rotatable to the left and the right

EV

OT

RA

K

DE

LTR

AK

2.5

QU

AT

RA

K

100 / 1

30 c

m--

-

---

125 / 1

50 c

m--

-

---

18

Snow-ploughing

clearance

Your specialist retailer:

IRUS Motorgeräte GmbHHäuslerwasen 3 · D-72393 Burladingen-SalmendingenPhone: +49(0)7126/928949-0 · Fax: +49(0)7126/928949-99E-mail: info@irus.de · Internet: http://www.irus.de/

Issued 01/2016Changes and printing/translation errors expressly reserved.

© IRUS Motorgeräte GmbH