nu horizons q1 2013 edition of portal

IN THIS ISSUE:

Your Gateway

to Today’s Leading

Technology Products

DEVELOPMENT TOOLSLattice Semiconductor

DISPLAYSPixel Qi

EMBEDDED SOLUTIONSAxiomtek

MEMORYISSIMicronWinbond

MICROCONTROLLERSAtmelRenesasSTMicroelectonics

POWER MANAGEMENTLinear Technology

POWER SUPPLIESMean WellN2Power

SENSORSAllegro MicroSystemsSTMicroelectronics

SIGNAL CONDITIONINGSemTech

SYSTEM MONITORINGAtmel

Q1 2013Americas Edition

See 3 for details

Single 26A or Dual 13A µModule Regulator

Info

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corporation.All other trademarks are the property of their respective owners.

www.linear.com/LTM4620

1-800-4-LINEAR

Watch Videos

Scalable to 100A with Four LTM®4620 µModule® Regulators

Features

• Dual 13A or Single 26A Complete Step-Down Regulator with Inductors, MOSFETs and DC/DC Controller• 4.5V ≤ VIN ≤ 16V• 0.6V ≤ VOUT ≤ 2.5V• Internal Temperature Sense• ±1.5% VOUT Accuracy Over Temperature Including Remote Sense Amplifier• Pin-compatible with LTM4628: Dual 8A, Single 16A µModule Regulator

Package Dimensions:15mm x 15mm x 4.41mm

www.linear.com/umodule/techclips

Proof of Performance

*4 x LTM4620 for 100A **60°C Rise, TA = 28°C, 200 LFM, 12VIN, 1.2VOUT, 100A

High Efficiency Excellent Thermal Performance**Precision Current Sharing* Fast Short Circuit Protection

PO

RTA

L C

ON

TE

NT

S

Nu Horizons Electronics is a leading

distributor of advanced technology

semiconductor, display, illumination

and power solutions to a wide variety

of commercial original equipment

manufacturers (OEMs) and electronic

manufacturing services providers

(EMS).

With sales facilities in 45 locations

across North America and Asia and

regional logistics centers throughout

the globe, Nu Horizons partners with

a limited number of best-in-class

suppliers to provide in-depth product

development, custom logistics and

life-cycle support to its customers.

Need more information right away?

Just use your smartphone to scan the barcodes throughout this publication and you'll link to more detailed information.

Note: You will need a QR Code Reader downloaded to your phone (i-nigma is free).

All registered trademarks displayed in this publication constitute the intellectual property of their respective holders. The technical information within this publication has been provided by Nu Horizons' suppliers. Nu Horizons does not assume any liability for its accuracy. Prices are subject to change without notice.

APPLICATION BRIEFSAtmel / Lattice / Micron / Silicon Image

High Capacity Indexed Storage System 4

Atmel / Exar / LTC / Micrel Remote Location Sensor Grid 4

DEVELOPMENT TOOLSLattice Semiconductor New FPGA Design Software 5

FEATURED COMPONENTS

DisplaysPixel Qi — New Enhanced Brightness 7” Display From the Leader in Low-power, Sunlight Readable LCDs

6

Embedded Solutions Axiomtek — Intelligent Digital Signage Applications 7

Memory Micron — P400m Enterprise SATA SSD 9

Memory Micron — Micron M500 SSD 10

Memory Winbond — Advanced Memory Solutions 11

MicrocontrollersAtmel — SAM4L Cortex-M4 MCUs Redefi ne the Power Benchmark

12

Microcontrollers STMicroelectronics — STM32 F3 Series Mixed-Signal MCUs 14-15

Power Management LTC — Two-Supply Diode-OR Current Balancing Controller 17

Power ManagementLTC — 20V, 2.5A Synchronous Monolithic Step-Down Regulator with Current and Temperature Monitoring

18

Power SuppliesN2Power — Ultra small, high effi ciency dual-output AC-DC power supply

20

SensorsAllegro MicroSystems — Introducing Allegro's Smallest Integrated Current Sensor IC

21

SensorsSTMicroelectronics — 3-Axis Digital Gyroscopes for Enhanced Motion-Control Realism and Image Stabilization

22

Signal Conditioning SemTech — High Power TVS for Ethernet Interfaces 23

System Monitoring Atmel — CryptoAuthentication™ ATSHA204 24

ADVERTISEMENTSLinear Technology Single 26A or Dual 13A μModule Regulator 2

ISSI SPI Flash 8

Renesas & MicriumChoose Renesas RX or RL78 MCUs, Get Micrium RTOS, Middleware, Support and More for FREE!

13

Linear Technology You Can Do Offl ine Power 16

Mean Well One Stop Shopping for All The Power You Need 19

Nu Horizons Product MatricesAnalog to Digital ConverterDigital to Analog Converter Display

25-27

Samsung LED / Nu Horizons Innovative Lighting Solutions 28

Nu Horizons LED Lighting Line Card 29

Nu Horizons Display Technologies Line Card 30

Nu Horizons Embedded Solutions / Single Board Computers 31

Nu Horizons Semiconductor Technologies Line Card 32-35

Nu HorizonsEnhance Your Design...With Nu Horizons Education and Development Solutions

36

4 Nu Horizons offers a wide range of application notes and white papers. For more information, please visit www.nuhorizons.com/application_notes

AP

PL

ICA

TIO

N B

RIE

FS

Remote Location Sensor Grid

High Capacity Indexed Storage System

As the need for more storage capacity continues to grow it becomes increasingly important to have high-capacity archival storage that is organized for easy access without sacrificing high reliability. A hierarchical storage system can provide indexing capability to quickly find desired data records by layering higher speed memory technologies on top of the low-level mass storage media. The upper layers can provide indexing ‘pointers’ to the most heavily requested data to speed access. Additionally, in these systems, RAID (Redundant Arrays of Independent Disks) architectures can be used at the mass storage level to dramatically improve reliability.

The block diagram of a typical system is shown below. The Atmel MCU connects to a system level Ethernet port and controls access to the storage system. A Lattice ECP3 FPGA manages the storage hierarchy with the Micron eMMC memory storing the data indexes. The Silicon Image SATA to dual eSATA core storage processors implement the RAID storage functions.

Sensing systems are the eyes and ears of any automated control system. The location of the sensors is one of the more critical aspects of providing the data needed for intelligent control. Reliable power is also required and in many cases battery back-up operation is supported. In industrial applications, like process control, Power over Ethernet can also be employed to simplify power delivery to key sensors used near Ethernet controlled equipment. In some applications sensors use a wireless communications protocol to eliminate dependency on the Ethernet system and further improve reliability.

The block diagram of a typical system is shown below. The LTC LT4275 Power Over Ethernet Powered Device controller generates power for the sensor from the Ethernet RJ45 connector. The Exar XRP7724 Power Architect controller manages the overall power of the system and charges a battery that can be used during power outages. During normal operation the XRP7724 generates power for the board and uses a Micrel Ripple Blocker to minimize noise on the power lines to the MCU and RF interface sub-block. The Atmel SAM4E MCU captures information from the sensors and communicates results to the RF sub-system.

Scan barcode to accessapplication note

Scan barcode to accessapplication brief

Silicon Image

SATA to Dual

eSATA

RaidStorage

RaidStorageAtmel

SAM3X MCU Silicon

Image

SATA to Dual

eSATA

RaidStorage

RaidStorage

Lace

ECP3

MicroneMMC

SystemEthernet

Atmel

SAM4E MCU

Micrel

RippleBlocker

LTC

LT4275PoE PD

Exar

Power ArchitectXRP7724

ADCSensors

I2C

EnetPSE

RFInterface

Baery

5

DE

VE

LO

PM

EN

T T

OO

LS

Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development

New FPGA Design SoftwareContact your local Nu Horizons FAE today for a demonstration!

Key New / Improved Features:

Improved Design Exploration: Power Matrix

Improved Design Exploration: Power Comparison Between Design Implementations

Improved Design Exploration: Compare Power Consumption Between Power Modes

Improved Design Exploration: Calculate Average Power Consumption in Time

More Effi cient Design Flow: Power Calculator – Avoid NCD Reload (performance)

More Effi cient Design Flow: Report on BLOCK paths

More Effi cient Design Flow: Report on Unconstrained paths

Lattice Synthesis (LSE) Used by Default in Any New XO or XO2 Projects

Ease of Use Throughout: Hierarchical View

More Effi cient Design Flow: Better, More Predictable Results

More Effi cient Design Flow: Faster Multi-PAR runtimes

Improved Ease of Use Throughout: Reveal Supports Mixed Language Designs

Improved Ease of Use Throughout: Auto-add top level signals to Simulation Waveform

Ease of Use Throughout: FPGA Design Guide Updates

Lattice Diamond design software offers leading-edge design and implementation tools optimized for cost sensitive, low-power Lattice FPGA architectures. Diamond 2.1 includes many improvements to ease of use, and refl ects Lattice’s continued investment in providing the best low power solution in the industry.

Scan barcode for more LatticeDiamond Software information

Note1: For Linux, there are unique 32-bit and 64-bit installers for LatticeMico System even though LMS is always a 32-bit application. The 32-bit installer is to be used with 32-bit Linux, and the 64-bit installer is to be used for 64 bit Linux.

Order Numbers

Diamond-E-12M Lattice Diamond 12 month electronic subscription

ALDEC-USBKEY Aldec USB key for fl oating license

HW-USBN-2A USB download cable

LatticeMico System (LMS):LatticeMico System is a separate tool to Diamond, but released with it. It has a signifi cant new feature combined with being an even more productive development environment for embedded systems.

Generate Platform Without Processor: LatticeMico System is now able to generate a Platform that does not include a processor. An example use is to create a Platform of peripherals (e.g. several UARTs). This is then implemented in the FPGA and wired to a discrete processor chip, thus expanding the processor’s peripheral mix.

Software Windows Linux

Diamond – 32-bit appPower Estimator – 32-bit appProgrammer – 32-bit appReveal – 32-bit app

Windows 7 (32-bit), Vista (32-bit), XP (32-bit) Red Hat 4, 5, 6; SUSE 10.1 (32-bit)

Diamond – 64-bit appPower Estimator – 64-bit appProgrammer – 64-bit appReveal – 64-bit app

Windows 7 (64-bit) Red Hat 4, 5, 6 (64-bit)

LatticeMico System – 32-bit app Windows 7 (32 & 64-bit), Vista (32-bit), XP (32-bit)Red Hat 4, 5, 6; SUSE 10.1 (32-bit)Red Hat 4, 5, 6 (64-bit) - see Note 1

ORCAstra – 32-bit app Windows 7 (32 & 64-bit), Vista (32-bit), XP (32-bit) Not Supported

DIS

PL

AY

S

6 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

New Enhanced Brightness 7” Display From the Leader in Low-power, Sunlight Readable LCDs The PQ070WS02 applies Pixel Qi’s unique display structure to minimize power and deliver unmatched usability and readability in all lighting conditions

Pixel Qi’s new enhanced brightness 7” display, the PQ070WS02,

addresses the widespread need for outdoor-capable, mobile

products. Pixel Qi’s patented technology combines a highly effi cient

transmissive optical structure with unique refl ective technology to

create a display that outperforms conventional sunlight readable

displays in power and readability. Pixel Qi technology is capable of

providing greater than a 10x reduction in power consumption versus

conventional 7” high bright solutions. This display allows the designer

to increase battery life and decrease system cost while providing a

superior viewing capability in the brightest lighting conditions. The

display is easy to integrate into existing systems and new designs

using the display’s standard interface and mechanical design.

The PQ070WS02 builds on Pixel Qi’s present 7” display, more

than doubling the backlit transmissive front-of-screen brightness to 400nits minimum. The boost in brightness means the PQ070WS02 has enhanced color performance

in all lighting conditions, while maintaining its low power refl ective capability. The PQ070WS02 is specifi cally designed with extended temperature capability.

Pixel Qi technology originated from the One Laptop per Child display and can be found in many “use anywhere” products. Pixel Qi technology has been deployed

in the millions worldwide. Pixel Qi offers both 10.1” and 7” diagonal sizes and will soon announce a new 4.X” display.

Scan barcode for more PQ070WS02 information

FEATURES:

Diagonal: 7”

Resolution: 1024x600

Refl ectance: 20%

Dark Room Brightness: 400 nits minimum

Color: 45% NTSC

Interface: 30pin LVDS

Dimensions (HxVxT): 164.3x101.3x3.5mm

Operating temperature: -35 to +70

Touch capable

BENEFITS:

Superior viewing capability in the brightest lighting situations.

Low-power, sunlight readable, <0.5 watts in refl ective mode

Increased battery life and decreased system cost

Wide temperature range for use anywhere capability

Reduced eye strain for reading applications in refl ective mode

Easy integration: standard size, standard driver electronics (LVDS), EDID enabled

APPLICATIONS:

Rugged Mobile Computing

POS

Automotive/Motorcycle / Marine

GPS

Kiosk

Embedded computing

E-Reading

7For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

EM

BE

DD

ED

SO

LU

TIO

NS

Digital Signage is more prevalent and diversifi ed than ever. Digital signage could be seen in

supermarkets, restaurants, transportation centers, retail stores, kiosk and more. The interactive

kiosk introduces another business – E-Board for meeting in corporate and education in schools.

Axiomtek’s Digital Signage solution is an excellent platform to manage and broadcast visual

and audio content effectively to provide visitors with information, entertainment and a variety

of other content. Axiomtek offers three product series of digital signage solution, ensuring that

your application need can be met.

Intelligent Digital Signage ApplicationsAxiomtek Total Digital Signage Systems with High Performance Intel® Technology

Scan barcode for more Axiomtek Digital Signage information

OPS Series – Intel® OPS Digital Signage Player & E-Board:

Intel® Open Pluggable Specifi cation (OPS) compliance

Supports 3rd Generation Intel® Core™ i7/ i5/ i3

Remote management: Intel® AMT 8.0

Easy maintenance: pluggable HDD and easy-to-change DRAM HDMI for 2nd display

DSA/DSH Series - Digital Signage System:

Axiomtek’s DSA series is an all-in-one digital signage solution with a pluggable engine

box for easy maintenance. Having the ability to simply slot-in and slot-out the pluggable

modules reduce the maintenance dramatically.

Pluggable engine box: Easy system confi guration and maintenance

Water/dust-proof design (front bezel: IP65, without touch screen)

46“/42”/32” TFT LCD - Full HD 1920 x 1080P

Self diagnosis and built-in sensors: external temperature , LCD color and LCD backlight

Motion detection sensors (optional)

Interactive IR touch solution (optional)

Supports VESA FPMPMI compliant fl at panel mount

Bus Digital Signage:

The bus digital signage is the fi rst solution which provides real-time information and

location-based advertisement which provides the passengers coupon and information on

nearby shopping mall and restaurants.

32” LED backlight LCD / 32” TFT LCD – Full HD 1920 x 1080P

Intel® Open Pluggable Specifi cation (OPS) compliance

Supports VESA FPMPMI compliant fl at panel mount

Optional SAW touch screen / Interactive IR touch screen solution (optional)

Pluggable engine box: Easy system confi guration and maintenance (optional)

Shopping MallShopping Mall

OFP320

OPS870

E-Board in Corporate/Education

OPS860

Train/Subway Station

DSA-142

Bus Station

OFP921-834

SPI FlashA Complete Offering

from 256Kb to 256Mb

1940 Zanker Rd., San Jose, CA. 95112 • Tel: 408.969.6600 • Support: [email protected] • www.issi.com

IS25LD/WD Family: pFlash® Technology(< 8Mb)• Data Retention: Superior Endurance Min 20 yrs after 200K

cycles (Best in the industry)

• Temperature Range: - 40°C ~ + 105°C• Frequency: 80/100MHz burst read in single/dual IO• Low Power Consumption: (LD) 2.5V : 10mA read & 15mA erase/pgm current at 33MHz 10ms sector erase time (WD) 1.8V : 2mA read & 106mA erase/pgm current at 30MHz 7ms sector erase time• Safeguard (OTP): Protection at all time

IS25LQ/WQ: nFlash® Technology (> 4Mb to 256Mb and growing)• Data Retention: Min 20 years after 100k• Temperature Range: - 40°C ~ + 125°C• Frequency: 104 MHz burst read single/dual/quad IO and QPI• Low Power Consumption (LD) 2.5V : Max 10mA read & 15mA erase/pgm current at 33MHz Max 0.7ms burst page program, 1~256B length (WD) 1.8V : Max 10mA read & 15mA erase/pgm current at 33MHz Max 0.7ms burst page program, 1~256B length• Safeguard (OTP): Protection at all time

Standard Features:ISSI’s full portfolio of Standard Grade and Automotive grade IS25LD/WD and IS25LQ/WQ serial flash multi-I/O memories feature the popular Serial Peripheral. The 25LD family offers highest perfor-mance & endurance of 200K cycles (best in the industry) and 20 years of data retention. The IS25LD/WD family supports Dual-SPI effectively doubling standard SPI clock rates. Whereas, the IS25 LQ/WQ family supports single, Dual-I/O and Quad-I/O for even higher performance. These parts can support up to 104MHz an equivalent of 416Mhz (50Mb/sec throughput) when using Quad mode.

0

50

100

150

200

250

300

350

400

450

SPI 80MHz SPI 104MHz SPI dual IO 80Mhz

SPI dual IO 100Mhz

SPI quad 104Mhz

Parallel (x8) 90nS

Parallel (x16) 90nS

Parallel (x8) 70nS

Parallel (x16) 70nS

Mb/

s

Interface

Maximum Data Transfer - (Throughput Mb/s) CS#SCKSISO

WP#HOLD#

CS#SCKIO0IO1WP#

HOLD#

CS#SCKIO0IO1IO2IO3

x1

x2

x4

NOR Based SPI Products are Available with x1, x2 and x4 Bus Widths

→←

↔↔

↔↔↔↔

Applications:• Medical• Industrial Controls• Energy Management • Automotive Telematics

• GPS• Cluster• Navigation

• ADAS• Infotainment• Rear Front Camera• Telecommunications

Temperature Grade• E= Extended grade (-40C to +105C)• A1 = Automotive grade (-40C to +85C)• A2 = Automotive grade (-40C to +105C)• A3 = Automotive grade (-40C to +125C)• KGD ( Call Facotry)

The Serial Flash is widely used due to the inherent advantages it offers such as low pin count, small footprints, increased throughput that enables XIP operation and/or offer improved boot time for code shadowing applica-tions. Automotive industry’s rich innovation of Electronics such as infotain-ment, ADAS, navigation, digital console, speech recognition, advanced diagnostics and other emerging segments require automotive grade flash memory. ISSI’s serial flash products AEC-Q100 and TS-grade compliant parts will be available in 2013.

* ISSI offers a complete portfolio of SRAM,DRAM, and Analog solutions


ME

MO

RY

P400m Enterprise SATA SSDEnterprise Performance and Reliability for Data Centers

Our P400m drive provides enterprise-level performance and reliability with superior data protection that is unmatched by

competing products. Built from the ground up using our extended performance and enhanced reliability technology (XPERT) and

25nm MLC NAND, the P400m SSD provides an optimal balance of endurance and speed.

Advanced read/write management, data path protection, and physical power-loss protection are built

into the P400m to ensure no loss of data under any circumstance. The P400m runs on Micron’s customized

fi rmware, which is designed to integrate our NAND-chosen controller into a cohesive system. All of these

features are provided by a trusted NAND manufacturer, ensuring a high-quality product with reliable customer

support.

APPLICATIONS:

Blade Servers

Enterprise Servers

Video-on-Demand (VOD) Systems

Financial Applications

Virtualization Appliances

Data Warehouses

Scan barcode for more P400m information

Advanced read/write management, data path protection, and physical power-loss protection are built

P400m

Capacity* 100GB, 200GB, 400GB

Interface SATA 6 Gb/s; backward-compatible to SATA 3 Gb/s

Sequential Read/Write Performance

Up to 350/300 MB/s

Random Read/Write Perfor-mance

Up to 55,000/17,000 IOPS

Active Average Power Consumption**

<5W

Idle Power Consumption <0.75W

Operating Shock 1500G/1ms

Operating Vibration 2–500Hz at 3.1G

MTTF 2 million device hours

Endurance Up to 7PB lifetime data written

Operating Temp Commercial (0˚C to +70˚C)

Form Factor 2.5-inch drive: 100.5 x 69.85 x 7.0mm

Weight <125g MAX

*Unformatted. 1GB = 1 billion bytes. Formatted capacity is less. **Data taken at 25°C using a 6 Gb/s SATA interface.

BENEFITS:

High Endurance Enterprise-focused endurance specifi cations (10 drive fi lls per day for 5 years) extend drive life

Superior Data Protection ARM/OR read management, RAIN NAND confi guration, DataSAFE data path protection, and physical power loss protection—all in one device

High Performancey High throughput and low latencies enabled by ReCAL technology deliver superior performance over hard disk drives (HDDs)

Low Power Consumes signifi cantly less power than HDDs and requires almost zero cooling

Enterprise-Focused Design Micron’s XPERT feature set delivers enterprise-level reliability and performance to an MLC drive

Part Density Size Voltage Sequential Read/Write (MAX) Random Read/Write (MAX)

MTFDDAK100MAN-1S1AA 100GB2.5-inch drive:

100.5 x 69.85 x 7.0mm5V±10% 350/210 MB/s

50,000/14,000 IOPS


100.5 x 69.85 x 7.0mm5V±10% 350/300 MB/s

55,000/16,000 IOPS


100.5 x 69.85 x 7.0mm5V±10% 350/300 MB/s

55,000/17,000 IOPS

ME

MO

RY


Micron M500 SSDBoost Your Mobile Computing Experience

Micron’s next-generation M500 solid state drive (SSD) is designed to meet the increasingly demanding needs of

the mobile computing market. The M500 delivers strong performance, greatly reduces power consumption, and

provides exceptional data protection. It is offered in three thin, ultra-compact form factors in several

different capacities.

Built using Micron’s 20nm NAND Flash—one of the most costeffective NAND devices

in the industry—the M500 provides high quality and reliability at a very competitive

price. This drive gives consumers a real boost in performance and responsiveness

that will keep them coming back for more SSD-powered solutions.

BENEFITS:

High Performance and Responsiveness Signifi cantly faster boot, fi le, and application load times compared to traditional hard drives

Low Power Low power consumption translates to longer battery life

Robust Data Security and Reliability Built-in data protection features, including best-in-class encryption, provide security and reliability without impacting drive performance

Flexibility Three ultra-compact form factors available in several capacities to meet unique application requirements

APPLICATIONS:

Ultrathin computers

Notebook computers

Tablets

Desktop PCs

Video-on-demand systems

Embedded systems

Scan barcode for more M500 SSD information

2.5-Inch mSATA M.2

Capacity*120GB, 240GB, 480GB, 960GB

120GB, 240GB, 480GB

120GB, 240GB, 480GB

Interface SATA 6 Gb/s

Sequential Read Performance Up to 500 MB/s

Sequential Write Performance

120GB: Up to 130 MB/s; 240GB: Up to 250 MB/s; 480GB and 960GB: Up to 400 MB/s

PCMark® Vantage Scores Up to 80,000

Active Average Power Consumtion**

150mW

Idle Power Consumption <100mW

Operating Temp Commercial (0˚C to 70˚C)

Dimensions100.45 x 69.85 x

7mm50.80 x 29.85 x

3.75mm80 x 22 x 3.5mm

Weight 70g MAX 10g MAX 10g MAX

*Unformatted. 1GB = 1 billion bytes. Formatted capacity is less. **Data taken at 25°C using a 6 Gb/s SATA interface. Power measured while running MobileMark® 2012. DIPM (device-initiated power management) enabled.

Micron’s next-generation M500 solid state drive (SSD) is designed to meet the increasingly demanding needs of

the mobile computing market. The M500 delivers strong performance, greatly reduces power consumption, and

Built using Micron’s 20nm NAND Flash—one of the most costeffective NAND devices

in the industry—the M500 provides high quality and reliability at a very competitive

Part Density Form Factor Voltage Sequential Read/Write (Up to) Random Read/Write (Up to)

MTFDDAK120MAV 120GB 2.5-inch 5V ±10% 500/130 MB/s 62,000/35,000 IOPS




MTFDDAT120MAV 120GB mSATA 3.3V ±5% 500/130 MB/s 62,000/35,000 IOPS



MTFDDAV120MAV 120GB M.2 3.3V ±5% 500/130 MB/s 62,000/35,000 IOPS




ME

MO

RY

Scan barcode for more Winbond

memory solutions

Advanced Memory Solutions

SPIFLASH® SERIAL FLASH MEMORIES:

Winbond's W25X and W25Q SpiFlash® memories feature the popular Serial Peripheral Interface (SPI), densities from 512K-bit to 512M-bit, small erasable sectors and the industry's highest performance. The W25Q family operates up to 104MHz and supports "Quad-SPI", increasing effective clock rate to 416MHz. SpiFlash® memories offer a pin, space and cost effi cient alternative to ordinary Parallel Flash memories, and are ideal for a wide range of applications including: PCs, DVD, Blu-Ray, WLAN, DSL & cable modems, printers, hard drives, set-top-box, LCD-TV, mobile phones, bluetooth, GPS, MP3, meters, DSP, FPGAs, automotive and more.

PARALLEL FLASH MEMORIES:

Winbond's W29GL family of Page Mode Parallel Flash memories are offered in densities from 32Mb to 512Mb and support industry standard interfaces and architectures. They are drop-in replaceable to the x29GL products available in the industry with no fi rmware change. They also offer faster program and erase times which improves customer throughput and offers faster fi rmware updates. Our Parallel Flash products are ideal for a wide variety of applications including: networking, set-top-box, DSL and cable modems, servers, industrial, wireless routers, PC peripherals, printers, mobile phones, digital cameras and more.

SPECIALTY AND MOBILE DRAM:

Winbond DRAM product portfolio consists of high performance Mobile DRAM and Specialty DRAM. These products are widely used by leaders in the consumer, communication, computer peripheral and automotive markets. Besides discrete parts, Winbond also offers Known-Good-Die (KGD) in wafer format to SiP and MCM customers. Winbond performs 100% burn-in and at-speed test to ensure high quality on our KGD products.

Density/ Interface

Specialty DRAM Mobile RAM

SDR DDR DDR2 DDR3 GDDR3 PSRAM LPSDR/ LPDDR LP DDR2

16Mb Yes

32Mb Yes Yes Yes

64Mb Yes Yes Yes

128Mb Yes Yes Yes Yes Yes

256Mb Yes Yes Yes Yes Yes Q4-13

512Mb Yes Yes Q2-13

1Gb Yes Yes Yes Q2-13 Q3-13

2Gb Yes Yes Q2-13

DensitySecure Sectors Speed

(ns)Page

Access (ns)Package

Boot/Uniform Sectors Sector Location

32M-bitTop/Bottom Boot Top/Bottom two sectors 70 25 TSOP48, TFBGA48, LFBGA64

Uniform Sector High/Low Sector 70 25 TSOP56, LFBGA64

64M-bitTop/Bottom Boot Top/Bottom two sectors 70 25 TSOP48, TFBGA48, LFBGA64

Uniform Sector High/Low Sector 70 25 TSOP56, LFBGA64

128M-bit Uniform Sector High/Low Sector 90 25 TSOP56, LFBGA64



Density Speed MHz Voltage Package Temp.AEC-Q100

Automotive

512K-bit 50/104 2.5V, 3V SO8, TSSOP8, WSON8, USON8 I

1M-bit 50/104 2.5V, 3V SO8, TSSOP8, VSOP8, WSON8, USON8 I

2M-bit 50/80/104 1.8V, 2.5V, 3V SO8, VSOP8, WSON8, USON8 I, A √

4M-bit 50/80/104 1.8V, 2.5V, 3V SO8, VSOP8, WSON8, PDIP8, USON8 I, A √

8M-bit 50/80/104 1.8V, 2.5V, 3V SO8, VSOP8, WSON8, PDIP8, USON8, WLBGA8 I, A √

16M-bit 50/80/104 1.8V, 2.5V, 3V SO8, VSOP8, SO16, WSON8, PDIP8, TFBGA24, USON8, WLBGA8 I, A √

32M-bit 80/104 1.8V, 3V SO8, VSOP8, SO16, WSON8, PDIP8, TFBGA24, USON8 I, A √

64M-bit 80 1.8V, 3V SO8, VSOP8, SO16, WSON8, PDIP8, TFBGA24, USON8 I, A √

128M-bit 70/104 1.8V, 3V SO8, VSOP8, SO16, WSON8, TFBGA24, USON8 I, A √

256M-bit 104 3V SO16, WSON8, TFBGA24 I, A √

512M-bit 104 3V SO16, WSON8, TFBGA24 I, A √

MIC

RO

CO

NT

RO

LL

ER

S

12

Atmel SAM4L ARM-based Cortex-M4 MCUs Redefi ne the Power BenchmarkThe industry’s fi rst device to provide ultra-low power consumption bundled with unrivaled wake-up times, delivering the highest total application performance in all operating modes

The Atmel® SAM4L family sets new low-power and effi ciency standards for ARM®-based Cortex®-M4 microcontrollers (MCUs). Used in hundreds of millions of Atmel AVR® MCUs in the market today, the SAM4L family features ultra-low Atmel picoPower® technology and consumes just one-third the power of current solutions. The family is also the lowest power Cortex-M4 microcontroller-based solution on the market today, running at just 90μA/MHz in active mode. The new devices consume 1.5μA in sleep mode with full random access memory (RAM) retention, and 700nA in back-up mode.

With wake-up times down to 1.5μs from even the deepest sleep modes, the SAM4L family is ideal for battery-powered consumer, industrial and portable healthcare products. The devices take advantage of the numerous

picoPower power-saving innovations, including Atmel SleepWalking, Peripheral Event System, unrivaled wake-up times and intelligent peripherals. To reduce overall power consumption, the SAM4L devices feature peripherals such as the innovative LCD controller that includes ASCII character mapping, hardware scrolling and blinking support. The SAM4L family has two series available, the LS series and the full-featured LC series. There are 48-, 64- and 100-pin package options available in both QFP and QFN, as well as 64-pin WLCSP and 100-pin BGA package options for space-constrained designs.

The SAM4L-EK evaluation kit is also available with the SAM4L family to help accelerate designs. The SAM4L-EK includes an embedded debugger, power measurement, LCD, USB and capacitive touch. In addition, the SAM4L-EK measures the current consumed by the MCU through independent circuitry, and displays this in real time. The SAM4L-EK is supported by the Atmel Studio 6 integrated development platform (IDP), which features project examples, debugging support and other resources.

Scan barcode for more SAM4L Cortex-M4MCUs information

FEATURES:

SleepWalking intelligent peripherals — allows a peripheral to qualify and evaluate incoming data without using the CPU, eliminating unneeded processor wake-ups and conserving power

Peripheral Event System — a real-time network that allows peripherals to communicate directly with each other without using the CPU

Unrivaled wake-up — whether on a proximity, a touch, an I2C address match or an ADC threshold, all without using the CPU

BENEFITS:

Ultra-low power consumption: picoPower technology ensures that devices are designed to consume the lowest power possible, while delivering long battery life without any performance sacrifi ce.

Highly effi cient signal processing: Thanks to the Cortex-M4 core, the SAM4L series provides highly effi cient signal processing with extended single-cycle multiply-accumulate instructions, optimized SIMD arithmetic and saturating arithmetic instructions.

Intelligent and effi cient peripherals: SAM4L devices offer a broad range of peripherals that are integrated into the Peripheral Event System and feature SleepWalking technology, along with other embedded power-saving features.

Ease of use: Backed by an ecosystem of design tools, the SAM4L series is easy to use, facilitating faster time to market. Design with the Atmel Studio 6 integrated development environment (IDE), which includes more than 1,500 project examples with source code, simulation tools and a powerful editor.

APPLICATIONS:

Industrial

Process transmitters

Sensors and detectors

Sub-meters

Sensor hub

Healthcare

Glucose meters

Pulse oximetry

Human fall detection

Blood pressure

Consumer

Sport watches

Remote control

Toys

Sensor hubs

Atmel SAM4L-EK Board

Choose Renesas RX or RX or RX RL78 MCUs. Get Micrium RTOS, Middleware, , Middleware, Support and More for FREE! Support and More for FREE!

FREE Micrium RTOSMicrium RTOS

FREE Micrium MiddlewareMicrium Middleware

FREE Renesas Kits & BoardsRenesas Kits & Boards

The Power of Two Micrium Promotion ProductsKernel µC/OS-II µC/OS-III

TCP/IP µC/TCP-IP

TCP/IP Extensions

µC/DHCPc µC/POP3cµC/FTPcs µC/SMTPcµC/TFTPcs µC/TELNETsµC/HTTPs

USB-Device

µC/USB Device

PHDC CDCHID ACMMSC

USB-Host

µC/USB Host

HID ACMMSC Printer classesCDC

File System µC/FS – FAT12/16/32

CAN µC/CAN

CANOpen µC/CANopen

Modbus µC/Modbus

Data Visualization Yes (µC/Probe) – 1 seat Free

Total Value of Free Products $111, 000 USD*

September 10, 2012 thru March 31, 2013 thru March 31, 2013 thru

$111,000 VALUE*

am.renesas.com/micrium

ofthe

The Power of Two – Renesas & MicriumThe Power of Two – Renesas & Micrium

Renesas and Micrium join forces to present an exciting offer for production users of Renesas’ flagship RX and RL78 MCUs.

RX and RL78 customers can get free:

Micrium’s real-time deterministic multitasking Kernel – µC/OS-II or µC/OS-III (single production license)

Middleware (TCP/IP, USB, File System and others)

One year of support and maintenance from Micrium

The new customer project must use a Renesas RX or RL78 MCU, and it must be used in a commercial application.

The Power of Two

* Based on using all available promotion items.

No royalties. No licensing fees. All source code supplied!Available in the Americas only: North America, South America and Central America.

For full rules and regulations, please visit us at our website.

© 2012 Renesas Electronics America Inc. (REA). All rights reserved. All trademarks are the property of their respective owners

RL78 RDK

PART#: PART#: YRDKRL78G13YRDKRL78G13

RX630 RDK

PART#:PART#:YRDKRX63NYRDKRX63NYRDKRX63N

APPLICATIONS:

Industrial

Process transmitters

Sensors and detectors

Sub-meters

Sensor hub

Healthcare

Glucose meters

Pulse oximetry

Human fall detection

Blood pressure

Consumer

Sport watches

Remote control

Toys

Sensor hubs

MIC

RO

CO

NT

RO

LL

ER

S


STM32 F3 Series Mixed-Signal MCUs32-bit MCUs with DSP instructions and FPU plus optimum analogintegration to complement STM32 F1 and F4 series.

The STM32 F3 series of microcontrollers combines a 32-bit ARM® Cortex™-M4 core with DSP and FPU instructions running at 72 MHz with advanced analog peripherals for more flexibility at a competitive cost.

The STM32 F3 series innovates in embedded digital signal control (DSC) design by combining a Cortex-M4 core with fast 12-bit, 5 MSPS and precise 16-bit sigma-delta ADCs, programmable gain amplifiers, fast comparators and versatile time control units, giving optimum integration.

The STM32 F3 series supports the STM32 F1 series, keeping pinout compatibility, and enlarges the STM32’s Cortex-M4 portfolio, which now offers both entry-level cost with the F3 series and highest performance with the F4 series. The full STM32 portfolio now covers more than 350 devices.

The STM32 F3 series includes devices with 64 to 256 Kbytes of on-chip Flash memory, and up to 48 Kbytes of SRAM. WLCSP66 (< 4.3 x 4.3 mm), LQPF48, LQFP64, LQFP100, UFBGA100 packages are available.

FEATURES: BENEFITS:

Performance 72 MHz/62 DMIPS (from Flash) or 94 DMIPS (from CCM-SRAM* Cortex-M4 with single cycle DSP MAC and floating point unit

Boosted execution of control algorithms More features possible for your applications Ease of use Better code efficiency Faster time to market Elimination of scaling and saturation Easier support for meta-language tools

Real-time performance CCM-SRAM* (core coupled memory): 8 Kbytes of SRAM mapped to the instruction bus; critical routines loaded in the 8-Kbyte CCM at startup can be completed at full speed with zero wait states, achieving 94 Dhrystone MIPS and CoreMark score 155 at 72 MHz SRAM and CCM-SRAM with parity bit 32-bit, AHB bus matrix DMA controllers Memory protection unit (MPU)

More performance for critical routines with zero-wait state execution from safe CCM-SRAM

Outstanding power efficiency Stop mode down to 5.1 μA typ

RTC down to 0.5 μA typ in VBAT mode

2.0 to 3.6 V or 1.8 V +/-8% power supply range

Flexibility to reduce power consumption for applications requiring advanced analog peripherals and low-power modes Running at low voltage or on a rechargeable battery

Maximum integration Up to 256 Kbytes of on-chip Flash memory, up to 48 Kbytes of SRAM, reset circuit, internal RCs, PLLs, WLCSP package available

More features in space-constrained applications

Superior and innovative peripherals Analog: 4x 12-bit ADC 5 MSPS* reaching 18 MSPS in interleaved mode, 3x 16-bit sigma- delta* ADC up to 50 KSPS, fast comparators* (50 ns), programmable gain amplifers* (4 gains, 1% accuracy), 12-bit DACs Up to 17 timers: 16 and 32 bits running up to 144 MHz* Audio: simplex or full duplex I²S interfaces* Up to 12 communication interfaces including 5x USART (9 Mbit/s), 3x SPI/I²S (18 Mbit/s), 2x I²C (1 MHz fast mode plus), CAN (1 Mbit/s), USB full speed Consumer electronic control (CEC)* Cyclic redundancy check (CRC) RTC/AWU Capacitive touch sensing (24 keys)

Full set of integration features on chip resulting in simplified board designs and fewer external components BOM cost reduced

STM32 Compatibility Pin compatibility and same API for peripherals as F1 series More than 350 Cortex-M based compatible STM32

devices More than 70 Cortex-M4 based compatible STM32 devices Digital signal processing (DSP) capability at competitive price


Scan barcode for more STM32 F3 Series information

MIC

RO

CO

NT

RO

LL

ER

S

APPLICATIONS:

Digital signal control

Home appliances Dual/single advanced motor control

Medical Portable devices

Consumer Gaming Entry level audio Biometric sensors Portable fitness

Industrial

Metering

Solar microinverter

Digital power conversion Entry-level digital power supplies (DSMPS)

LED lighting

DEVELOPMENT TOOLS:

A complete offer of development tools is available, including the following kits and evaluation boards:

Low-cost STM32F3-Discovery kit featuring an STM32F30x MCU, ST’s MEMS 3-axis digital output gyroscope and e-compass (3D digital linear accelerometer and 3D digital magnetic sensor).

Two full-featured boards for demonstration and evaluation purposes: STM32F303 line: STM32F303VCT6 MCU with two inductor-motor-control 34-pin connectors, a humidity sensor, 1-Mbit SPI, serial Flash (order code: STM32F303C-EVAL*)

DSTM32F373 line: STM32F373VCT6 MCU with ECG (electrocardiogram) sensor, pressure sensor and PT100 temperature sensor connected to the 3 16-bit sigma-delta ADCs, a touch slider, HDMI connectors (CEC and DDC), light dependent resistor (LDR) (order code: STM32373C-EVAL)

Both boards feature standard peripherals such as 240x320 TFT color LCD, 2 Gbyte or more byte microSD card (SPI interface), I²C compatible temperature sensor, EEPROM and RF Dual Interface EEPROM (I²C and RF), RS-232 communication and IrDA transceiver, USB FS connector, CAN 2.0A/B compliant connection, potentiometer, JTAG/SWD and ETM connectors, and an embedded ST-LINK/V2 for easy debugging and programming.

STM32F3DISCOVERY STM32373C-EVAL

2

STM32 F3 series

32-bit MCUs with DSP instructions and FPU plus optimum analog integration to complement STM32 F1 and F4 series

The STM32 F3 series of microcontrollers combines a 32-bit ARM® Cortex™-M4 core with DSP and FPU instructions running at 72 MHz with advanced analog peripherals for more flexibility at a competitive cost. The STM32 F3 series innovates in embedded digital signal control (DSC) design by combining a Cortex-M4 core with fast 12-bit, 5 MSPS and precise 16-bit sigma-delta ADCs, programmable gain amplifiers, fast comparators and versatile time control units, giving optimum integration. The STM32 F3 series supports the STM32 F1 series, keeping pinout compatibility, and enlarges the STM32’s Cortex-M4 portfolio, which now offers both entry-level cost with the F3 series and highest performance with the F4 series. The full STM32 portfolio now covers more than 350 devices. The STM32 F3 series includes devices with 64 to 256 Kbytes of on-chip Flash memory, and up to 48 Kbytes of SRAM. WLCSP66 (< 4.3 x 4.3 mm), LQPF48, LQFP64, LQFP100, UFBGA100 packages are available.

STM32 F3 PRODUCT LINESBoth product lines include:

Cortex-M4 + FPUFmax = 72 MHz

MPUPLL

Low and high speed internal oscillators

2x watchdogs + RTC(real-time clock)

HW CRCReset circuitry

POR/PDR

Multiple DMACommunication

peripheralsUSART, SPI, I²C

Multiple 16-bit timers1x 32-bit timer

Temperature sensorBackup registers

ETMReset + BOR PVD

STM32F372/373/383 lines

Up to 256-Kbyte

Flash

3x DAC12-bit

2x comparator

1x 12-bitADC

1 MSPS SAR

Up to 32-Kbyte

SRAM

3x 16-bit Σ∆ ADC CEC CAN

2.0BUSB

2.0 FS

STM32F302/303/313 lines

Up to 256-Kbyte

Flash

2x16-bitAMCtimer

2x DAC12-bit

7x comparator

4x 12-bitADC

5 MSPS SAR

Up to 40-Kbyte

SRAM

8-Kbyte code SRAM

4x PGA CAN 2.0B

USB2.0 FS

Abbreviations:

FS: full speed

AMC: advanced motor control

SDIO: secure digital input/output

FPU: floating point unit

DSC: digital signal controller

SAR: successive approximation register

BOR: brown-out reset

PVD: power voltage detector

MPU: memory protection unit

CEC: consumer electronic control

ETM: Embedded Trace Macrocell

2

STM32 F3 series





MPUPLL




POR/PDR





ETMReset + BOR PVD

STM32F372/373/383 lines

Up to 256-Kbyte

Flash

3x DAC12-bit

2x comparator

1x 12-bitADC

1 MSPS SAR

Up to 32-Kbyte

SRAM


2.0BUSB

2.0 FS

STM32F302/303/313 lines

Up to 256-Kbyte

Flash

2x16-bitAMCtimer

2x DAC12-bit

7x comparator

4x 12-bitADC

5 MSPS SAR

Up to 40-Kbyte

SRAM

8-Kbyte code SRAM

4x PGA CAN 2.0B

USB2.0 FS

Abbreviations:

FS: full speed











2

STM32 F3 series





MPUPLL




POR/PDR





ETMReset + BOR PVD

STM32F372/373/383 lines

Up to 256-Kbyte

Flash

3x DAC12-bit

2x comparator

1x 12-bitADC

1 MSPS SAR

Up to 32-Kbyte

SRAM


2.0BUSB

2.0 FS

STM32F302/303/313 lines

Up to 256-Kbyte

Flash

2x16-bitAMCtimer

2x DAC12-bit

7x comparator

4x 12-bitADC

5 MSPS SAR

Up to 40-Kbyte

SRAM

8-Kbyte code SRAM

4x PGA CAN 2.0B

USB2.0 FS

Abbreviations:

FS: full speed











2

STM32 F3 series





MPUPLL




POR/PDR





ETMReset + BOR PVD

STM32F372/373/383 lines

Up to 256-Kbyte

Flash

3x DAC12-bit

2x comparator

1x 12-bitADC

1 MSPS SAR

Up to 32-Kbyte

SRAM


2.0BUSB

2.0 FS

STM32F302/303/313 lines

Up to 256-Kbyte

Flash

2x16-bitAMCtimer

2x DAC12-bit

7x comparator

4x 12-bitADC

5 MSPS SAR

Up to 40-Kbyte

SRAM

8-Kbyte code SRAM

4x PGA CAN 2.0B

USB2.0 FS

Abbreviations:

FS: full speed











BOTH PRODUCT LINES INCLUDE:

90V AC to305V AC

VOUT

VINVIN_SENSE

GATE

SENSEGND

FB

OPTO

You Can Do Offline Power

Info & Free Samples

The LT®3798 is a general purpose isolated offline flyback controller that combines active power factor correction (PFC) with no optocoupler required for output voltage feedback into a single-stage converter. The device modulates input current in phase with line voltage to attain a PF greater than 0.97. It has both a voltage and current loop so it can provide a constant current or constant voltage (CCCV) output. Its internal architecture provides low harmonic distortion and delivers efficiencies as high as 90%.

www.linear.com/product/LT3798

1-800-4-LINEAR

LT3798 Demo Board(4.45” x 1.75” x 1.25”)

Output Regulation

Simple AC/DC Conversion with Active Power Factor Correction

, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners.

LOAD (A)

0

V OUT

(V) 23

24

25

22

21

200.25 0.5 0.75 1 1.25 1.5 1.75 2

120VIN240VIN

video.linear.com/99

VIN = 90V AC to 265V ACVOUT = 24V, IOUT = 2A

17

PO

WE

R M

AN

AG

EM

EN

T

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

LTC4370 — Two-Supply Diode-ORCurrent Balancing ControllerFirst-of-its-kind current-sharing controller with reverse current blocking — eases design of reliable power systems

The LTC®4370 is a two-supply current sharing controller which incorporates

MOSFET ideal diodes. The diodes block reverse and shoot-through currents during

start-up and fault conditions. Their forward voltage is adjusted to share the load

currents between supplies. Unlike other sharing methods, neither a share bus nor

trim pins on the supply are required.

The maximum MOSFET voltage drop can be set with a resistor. A fast gate

turn-on reduces the load voltage droop during supply switchover. If the input supply

fails or is shorted, a fast turn-off minimizes reverse current transients.

The controller operates with supplies from 2.9V to 18V. For lower rail voltages,

an external supply is needed at the VCC pin. Enable inputs can be used to turn off

the MOSFET and put the controller in a low current state. Status outputs indicate

whether the MOSFETs are on or off. The load sharing function can be disabled to

turn the LTC4370 into a dual ideal diode controller.

FEATURES:

Shares Load Between Two Supplies

Eliminates Need for Active Control of Input Supplies

No Share Bus Required

Blocks Reverse Current

No Shoot-Through Current During Start-Up or Faults

0V to 18V High Side Operation

Enable Inputs

MOSFET On Status Outputs

Dual Ideal Diode Mode

16-Lead DFN (4mm × 3mm) and MSOP Packages

APPLICATIONS:

Redundant Power Supplies

High Availability Systems and Servers

Telecom and Network Infrastructure

Scan barcode for more LT4370 information

12V, 10A Load Share Current Sharing Error vs Supply Difference

SUM85N03-06P

*OPTIONAL, FOR FAST TURN-ON

SUM85N03-06P

GATE1CPO1

CPO2

GND

EN1

EN2

RANGE

VINA12V

VINB12V

0.1µF

NC

OUT12V, 10A

39nF*

39nF*

VIN1

VCCFETON1

COMP

FETON2

OUT1

OUT2

GATE2VIN2

LTC43702mΩ

2mΩ

0.18µF

VINA – VINB (mV)–750

–20

SHAR

ING

ERRO

R (I V

INA

– I V

INB)

/IL

(%)

–10

0

10

0 052052–005– 500

20

–15

–5

5

15

750

12V, 10A Load Share Current Sharing Error vs Supply Difference

SUM85N03-06P

*OPTIONAL, FOR FAST TURN-ON

SUM85N03-06P

GATE1CPO1

CPO2

GND

EN1

EN2

RANGE

VINA12V

VINB12V

0.1µF

NC

OUT12V, 10A

39nF*

39nF*

VIN1

VCCFETON1

COMP

FETON2

OUT1

OUT2

GATE2VIN2

LTC43702mΩ

2mΩ

0.18µF

VINA – VINB (mV)–750

–20

SHAR

ING

ERRO

R (I V

INA

– I V

INB)

/IL

(%)

–10

0

10

0 052052–005– 500

20

–15

–5

5

15

750

LTC3626 – 20V, 2.5A SynchronousMonolithic Step-Down Regulator with Current and Temperature Monitoring The LTC®3626 is a high effi ciency, monolithic synchronous buck regulator using a phase-lockable controlled on-time, current mode architecture capable of supplying up to 2.5A of output current. The operating supply voltage range is 3.6V to 20V, making it suitable for a wide range of power supply applications.

The operating frequency is programmable from 500kHz to 3MHz with an external resistor allowing the use of small surface mount inductors. For applications sensitive to switching noise, the LTC3626 can be externally synchronized over the same frequency range. An internal phaselocked loop aligns the on-time of the top power MOSFET to the internal or external clock. This unique controlled on-time architecture is ideal for high step-down ratio applications that demand high switching frequencies and fast transient response. An internal phase lock loop servos the on-time of the internal one-shot timer to match the frequency of the internal clock or an applied external clock.

The LTC3626 offers two operational modes: Burst Mode and forced continuous mode to allow the user to optimize output voltage ripple, noise and light load effi ciency for a given application.

FEATURES:

3.6V to 20V Input Voltage Range

Wide Output Voltage Range of 0.6V to 97% VIN Optimized for 0.6V to 6V

Low RDS(ON) Integrated Switches Provide Up to 95% Effi ciency

Up to 2.5A of Output Current

Average Input and Output Current Monitoring

Programmable Average Input/Output Current Limit

Die Temperature Monitor and Programmable Limit

Adjustable Switching Frequency: 500kHz to 3MHz

External Frequency Synchronization

Current Mode Operation for Excellent Line and Load Transient Response

0.6V Reference with 1% Accuracy Over Temperature

User Selectable Burst Mode® or Forced Continuous Operation

Short-Circuit Protected

Output Voltage Tracking Capability

Power Good Status Output

Available in Small, Thermally Enhanced, 20-Lead (3mm × 4mm) QFN Package

APPLICATIONS:

Distributed Power Systems

Battery-Powered Instruments

Point-of-Load Power Supply

PO

WE

R M

AN

AG

EM

EN

T

18

Scan barcode for moreLTC3626 information


3626f

PVINSVINRUN BOOST

SW

VON

FB

PGOODINTVCCTRACK/SSITHMODE/SYNCTSETIMONINTMONIMONOUT

SGND PGND

LTC3626

47µF

47µF

VOUT3.3V2.5A

VIN3.6V TO 20V

5.1k1µF

2.2µF

0.1µF

22pF

2.2µH

115k

25.5k324k

RT

Efficiency vs Load Current

LOAD CURRENT (mA)

30

EFFI

CIEN

CY (%

)

POWER LOSS (W

)

90

100

20

10

80

50

70

60

40

1 100 1000 100000

0.01

10

1

0.1

0.00110

Burst ModeOPERATION

VIN = 12VVIN = 5V

VOUT = 3.3V

PO

WE

R S

UP

PL

IES

20

Scan barcode for more XL330-54 CS product information


Ultra small, high effi ciency dual-output AC-DC power supplyThe XL330-54 CS delivers a power density over 15 watts per cubicinch. With an overall height of 1.35" and a 3" x 5.3" footprint, it is ideally suited for OEMs using the industry standard 1U chassis.

FEATURES:

330 W AC-DCc /3” x 5.3” Footprint

Available model: 54V / 12V

Up to 90% effi ciency

High power density: over 15 W/in3

All outputs may be paralleled

Remote on /off

5V standby output (1A)

12V aux output (1A)

Universal AC input

Active PFC (90 – 264 Vac)

Active current sharing for n, n+1

Active inrush current limiter

RoHS compliant

BENEFITS:

High density frees real estate in OEM designs

High MTBF for greater reliability

High effi ency means less heat, lower cooling required

Active current sharing allows higher power capacity

Active inrush protection eliminates overcurrent failures

APPLICATIONS:

Telecom

Networking

Test equipment

Gaming systems

Lighting systems

Industrial

N2Power leads the power density race with its high effi ciency XL330-54 CS AC-DC dual-output power supply. Our advanced technology yields a very small footprint, reduces wasted power, and offers the highest power density in its class. This effi cient design means reduced energy costs, a greater return on your investment, greater reliability and longer product life.

The XL330-54 CS provides up to 90% effi ciency. Our unique design reduces energy consumption and generates less wasted heat. It requires little forced air cooling, decreases AC power consumption, increases reliability and economy of operation. Comparisons of effi ciencies show that our supplies can reduce losses up to 25%.

The main output is enabled whenever all of the required startup conditions are met, and is shut down upon command, loss of input power or whenever excessive loads or temperatures are sensed. When AC input power is lost it provides the host system with advanced warning of an impending shutdown.

TYPICAL MECHANICAL DRAWING:Inches (millimeters)

Screws shown for reference onlyLock washer

Printed Circuit Board

5.30(134.6)

4.55(115.6)

2.55(64.8)

3.00(76.2)

1.35(34.3)

1.10(27.9)

0.06(1.5)

0.19(4.8)

XL330-54 CSHeight = 1.35 (34.3)

Safety ground connection pointat plated through hole

.375(9.53)

.225(5.71)

J2

J4

J3

Pin 1Pin 1

Pin 1J1

Pin 1

Safety ground connection pointat plated through hole

21

SE

NS

OR

S

APPLICATIONS:

Targeted for the industrial, appliance, and automotive markets Motor and pump control in white goods applications Short circuit and overpower detection in audio applications Lighting applications General power supply monitoring Many industrial motors are powered off of 24 V rails ― the ACS711 would

be an excellent high side sensor in these applications

The Allegro ACS711 provides economical and precise solutions for AC or DC current sensing in low-side or high side applications less than 100 VDC sensing applications.

The device consists of a linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer and factory programming at Allegro. The output of the device has a positive slope proportional to the current flow from IP+ to IP- (pins 1 and 2, to pins 3 and 4). The internal resistance of this conductive path is only 0.6 mΩ with proper PCB design as given in the datasheet.

The ACS711 can be used in low-side current sensing applications, although the terminals of the conductive path are electrically isolated from the sensor leads (pins 5 through 8), providing sufficient internal creepage and clearance dimensions for a low AC or DC working voltage application. The thickness of the copper conductor allows survival of the device beyond 30 Amps depending on the ambient temperature.

Scan barcode for more information onAllegro's Integrated Current Sensor ICs

Introducing Allegro's Smallest Integrated Current Sensor ICDesigned for high and low side sensing applications, this new micro sized device is possibly the smallest fully integrated linear current sensor IC in the world!

FEATURES: BENEFITS:

Extremely small 3 x 3 mm footprint QFN package offering Small PCB area

Integrated 0.6 mm conductor Eliminates the need for an external sense resistor and offers lower power dissipation than higher resistance sense resistor solutions

Output voltage proportional to AC or DC currents

±15 A and ±30 A full scale sensing ranges

Overcurrent fault pin trips and latches at 100% of full scale current Suitable for over current protection applications

Low-noise analog signal path Improved sensing resolution

100 kHz signal bandwidth Used for higher speed switching applications

3.3 V, single supply operation Compatible with 3.3 V microprocessors

Integrated electrostatic shield Virtually eliminates transient coupling from conductor to output

Factory-trimmed for accuracy

Extremely stable output offset voltage chopper stabilized internal amplifiers

Nearly zero magnetic hysteresis, coreless design Improves accuracy and resolution

Ratiometric output from supply voltage

SE

NS

OR

S


Scan barcode for more L3GD20 and L3G4IS information

3-Axis Digital Gyroscopes for Enhanced Motion-Control Realism and Image StabilizationST’s new 3-axis digital gyroscopes are the perfect synthesis of accuracy and design flexibility

ST’s latest gyroscopes feature excellent accuracy as

a result of their unique and patented mechanical structure

based on a single driving mass. The L3GD20 and L3G4IS boast

superior output stability over time and temperature, removing

the need for any further calibration on the customer‘s side. They

offer user-selectable full scales, ranging from ± 65 to ±2000

dps, to cater for gaming, navigation, and OIS applications.

L3GD20 FEATURES:

Three selectable full scales (±250/500/2000 dps)

20+ kHz resonant frequency over the audio bandwidth

I2C/SPI digital output interface

16-bit rate data output

8-bit temperature data output

Wide supply voltage: 2.4 to 3.6 V

Low-voltage compatible IOs (1.8 V)

Embedded FIFO

Embedded power-down and sleep modes

Embedded temperature sensor

High shock survivability

L3G4IS FEATURES:

Dual-core gyroscope for UI and OIS

Dedicated digital interface (SPI) and full-scale of ±65 dps for OIS applications

Dedicated digital interface (I2C) and full-scale ±250 dps up to ± 2000 dps for gaming

Embedded FIFO

Power-down/sleep mode for smart power saving

Embedded temperature sensor

L3GD20 BENEFITS:

Design flexibility

Resonant frequency outside the audio bandwidth to strengthen immunity to audio noise and mechanical vibration coupled through the PCB

Extremely low power consumption lengthens battery life

Embedded FIFO for smart data storage and power saving

Temperature detection for advanced thermal drift compensation

L3G4IS BENEFITS:

First two-in-one gyroscope that can simultaneously handle user-motion recognition and camera image stabilization

Enables more reliable performance, sleeker form factors and lower costs in motion-sensitive phones, tablets and other smart consumer devices

Addresses power constraints in batteryoperated portable devices, with powerdown/ sleep modes and an embedded FIFO memory block

DEVICE SUMMARY:

Features L3GD20 L3G4IS

Angular rate range (FS) typ (dps) ±250/500/2000±65 (OIS)

±250/500/2000 (UI)

Driving frequency (kHz) 20+ 20+

Angular rate noise density (°/s/ √ Hz) 0.030.008 (OIS)0.015 (UI)

ODR (Hz) 95, 190, 380, 7609.5 (OIS)

95, 190, 380, 760 (UI)

Programmable interrupts 2 2

Embedded FIFO √ √

Current consumption typ (mA) 69 (OIS)6.5 (UI)

Supply voltage range (V) 2.4 to 3.63.0 to 3.6 (OIS) 2.4 to 3.6 (UI)

Operating temperature range (°C) -40 to +85 -30 to +85

ApplicationsGaming, pointing devices

and navigationOptical image stabilization

(OIS) and user interfaces (UI)

Digital interfaces I2C/SPI I2C/SPI

Size (mm) 4 x 4 x 1 4 x 4 x 1

23

SIG

NA

L C

ON

DIT

ION

ING


High Power TVS for Ethernet Interfaces3.3V, 4-line TVS Array with High Surge Immunity Ideal for Protecting Ethernet PHYs

RailClamp® TVS diodes are specifi cally designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (cable discharge events), and EFT (electrical fast transients).

The unique design incorporates surge rated, low capacitance steering diodes and a TVS diode in a single package. The RClamp®3374N is designed to replace up to two components for board level GbE protection. Each device is designed to protect two line pairs. This is accomplished by routing traces through the device. When connected in this fashion, the device can withstand a high level of surge current (40A, 8/20us) while maintaining a low loading capacitance of less than 5pF. The high surge capability means it can be used in high threat environments in applications such as Gigabit Ethernet, telecommunication lines, and LVDS interfaces. The RClamp3374N is constructed using Semtech’s proprietary EPD process technology. The EPD process provides low stand-off voltages with signifi cant reductions in leakage current and capacitance over silicon-avalanche diode processes. It features a true operating voltage of 3.3 volts for superior protection.

Scan barcode for more RClamp®3374N information

APPLICATIONS:

10/100/1000 Ethernet Automotive Central Offi ce Equipment LVDS Interfaces MagJacks / Integrated Magnetics Notebooks / Desktops / Servers

MECHANICAL CHARACTERISTICS:

SLP3020N10 10L package Pb-Free, Halogen Free, RoHS/WEEE Compliant Nominal Dimensions: 3.0 x 2.0 x 0.60 mm Lead Finish: NiPdAu Molding compound fl ammability rating: UL 94V-0

FEATURES: BENEFITS:

Low operating voltage: 3.3V Allows the TVS device to avalanche quickly during a transient

Low clamping voltage Ensures that even the most transient sensitive PHYs are safeguarded

Transient Protection for high-speed data lines to: IEC 61000-4-2 (ESD) ±30kV (air), ±30kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 40A (8/20μs)

Ensures that PHYs are safeguarding in a harsh transient environment

Low capacitance: 1.7pF typical, line-to-line Ensures that signal integrity is maintained over long cable reaches

Flow through package Helps facilitate a more favorable layout, allowing traces to stay on one board layer

0

5

10

15

20

25

30

35

40

0 10 20 30 40 50 60

Clam

pign

g Vo

ltage

(V)

8x20µs Surge Current (A)

RClamp3374N Clamping Voltage Performance

RClamp3374N

Competor A

SY

ST

EM

MO

NIT

OR

ING


FEATURES:

Superior SHA-256 NIST-approved algorithm

Multi-level hardware security

Secure authentication and key exchange

High-quality hardware random number generator (RNG)

Guaranteed unique serial number

Single-wire and I2C interface options

Secure personalization

Green-compliant plastic packages

BENEFITS:

Authenticates peripherals

Protects confi dential information

Secures communications

Prevents overbuilds, clones, or any illegitimate uses

Tracks and controls manufacturing

Controls licensing agreements

Complete security solution with one device

Easy to integrate

Insures reliable system operation

Protects revenue

Protects brand valueAPPLICATIONS:

Medical

Industrial Automation

Consumer Devices

Metering

Consumables

Scan barcode for more ATSHA204 information

Atmel CryptoAuthentication™ ATSHA204Secure authentication technology to secure your design investment, revenue, and brand value

The Atmel ATSHA204 is the fi rst CryptoAuthentication product to integrate the SHA-256 hash algorithm

with a 4.5Kb EEPROM, providing robust and cost-effective hardware authentication and secure key/data

storage. Features such as small outline plastic packages and a single-wire interface make the ATSHA204

ideal for handheld electronic systems or any space-constrained embedded system.

Implementing host-side security to provide a full system solution is now easier than ever. The ATSHA204

includes a client and host security capability that offl oads key storage and the execution algorithms from the

host microcontroller, signifi cantly reducing both system cost and complexity. When using the Atmel ATSHA204

on the host, you no longer need to worry about writing crypto algorithms or developing crypto protocols for

your systems.

CryptoAuthentication has been architected to provide fl exible user-confi gured security to enable a wide range of authentication models, and is easy

and timely to design in with no crypto expertise required. The ATSHA204 incorporates the latest security features developed from a long history of security IC

design expertise. The devices have full metal shields over the entire internal circuitry as well as internal clocks and voltage generation, encrypted memories,

tamper detection and fully secure production test methods.

Atmel CryptoAuthentication ATSHA204 gives designers the capability to cost-effectively authenticate component accessories and consumables, protect

software/fi rmware from piracy, and enable secure boot methods, all aimed at protecting corporate revenue, brand value, and limiting liability exposure.

25

Audi

o AD

C

Anal

og to

Dig

ital C

onve

rter

Mat

rixAK

M

Bits

ADCs

Inte

rfac

eAu

dio

Freq

uenc

y (K

Hz)

I2C

3 w

ireUS

BTD

MHW

4896

192

216

16si

ngle

dual

quad

20du

al

24du

al

quad

Gene

ral P

urpo

se A

DC

Exar

Bits

ADCs

Spee

d (s

ampl

es p

er s

econ

d- s

ps)

7.5

1530

6032

01K

4K8K

200K

450K

800K

1M1.

6M2.

8M3.

5M6M

10M

15M

25M

40M

65M

80M

105M

150M

185M

210M

250M

310M

10du

al

8si

ngle

LTC

24si

ngle

dual

quad

octa

l

sixt

een

20si

ngle

dual

quad

octa

l

18si

ngle

16si

ngle

dual

octa

l

sixt

een

14si

ngle

dual

quad

octa

l

12si

ngle

dual

quad

octa

l

10si

ngle

dual

8si

ngle

dual

Nuvo

ton

24si

ngle

dual

ST M

icro

12du

al

26

Audi

o DA

C

Digi

tal t

o An

alog

Con

vert

er

Mat

rix

AK

M

Bits

DACs

Outp

utIn

terf

ace

Audi

o Fr

eque

ncy

Sing

leDi

ffere

ntia

lI2 C

Para

llel

3 W

ireKH

z

24du

al

48-1

92

six

19

2

octa

l

192

32du

al

19

2 -

216

Gene

ral P

urpo

se D

AC

Exar

Bits

DACs

Outp

utIn

terf

ace

Settl

ing

Tim

e

Curr

ent

Volta

geSP

II2

CPa

ralle

l3

Wire

Puls

euS

8si

ngle

13

10si

ngle

13

12si

ngle

13

LTC

6du

al

NA

8

sing

le

3.2

dual

3.4-

3.5

quad

3.

3-3.

5

octa

l

3.4-

30

10

sing

le

3.

8-30

dual

3.

9-75

0

quad

3.

3-19

octa

l

3.4-

30

12

sing

le

0.02

-14

dual

1.

5-14

quad

2.

0-14

octa

l

3.4-

10

14

sing

le

0.02

-12

dual

2.

0-9

quad

3.

5-9

octa

l

9.0-

10

16

sing

le

0.02

-20

dual

2.

0-10

quad

2.

0-10

octa

l

4.9-

10

18si

ngle

2.

1

dual

2.

1

27

Gene

ral P

urpo

se D

AC

Exar

Bits

DACs

Outp

utIn

terf

ace

Settl

ing

Tim

e

Curr

ent

Volta

geSP

II2

CPa

ralle

l3

Wire

Puls

euS

8si

ngle

13

10si

ngle

13

12si

ngle

13

LTC

6du

al

NA

8

sing

le

3.2

dual

3.4-

3.5

quad

3.

3-3.

5

octa

l

3.4-

30

10

sing

le

3.

8-30

dual

3.

9-75

0

quad

3.

3-19

octa

l

3.4-

30

12

sing

le

0.02

-14

dual

1.

5-14

quad

2.

0-14

octa

l

3.4-

10

14

sing

le

0.02

-12

dual

2.

0-9

quad

3.

5-9

octa

l

9.0-

10

16

sing

le

0.02

-20

dual

2.

0-10

quad

2.

0-10

octa

l

4.9-

10

18si

ngle

2.

1

dual

2.

1

Disp

lay

Mat

rix

Thin

fi lm

tran

sist

or li

quid

cry

stal

dis

play

(TFT

-LCD

) is

a va

riant

of l

iqui

d cr

ysta

l dis

play

(LCD

) whi

ch u

ses

thin

-fi lm

tran

sist

or (T

FT) t

echn

olog

y to

im

prov

e im

age

qual

ity (e

.g.,

addr

essa

bilit

y, co

ntra

st).

TFT

LCD

is o

ne ty

pe o

f ac

tive

mat

rix L

CD, t

houg

h al

l LCD

-scr

eens

are

bas

ed o

n TF

T ac

tive

mat

rix

addr

essi

ng.

An o

rgan

ic li

ght e

mitt

ing

diod

e (O

LED)

is

a lig

ht-e

mitt

ing

diod

e (L

ED) i

n w

hich

the

emis

sive

ele

ctro

lum

ines

cent

laye

r is

a fi l

m

of o

rgan

ic c

ompo

unds

whi

ch e

mit

light

in

resp

onse

to a

n el

ectri

c cu

rren

t.

A su

per-

twis

ted

nem

atic

dis

play

(STN

) is

a ty

pe o

f mon

ochr

ome

pass

ive

mat

rix li

quid

cr

ysta

l dis

play

(LCD

). ST

N di

spla

ys p

rovi

de

mor

e co

ntra

st th

an tw

iste

d ne

mat

ic (T

N)

disp

lays

by

twis

ting

the

mol

ecul

es fr

om

180

to 2

70 d

egre

es.

E-Pa

per d

ispl

ays

use

posi

tive

and

nega

tive

char

ged

pigm

ent c

hips

(in

both

whi

te a

nd

blac

k) to

cre

ate

an e

lect

roni

c ve

rsio

n of

pr

inte

d pa

per.

Supp

lier/

Tech

nolo

gyTF

TOL

EDST

NE-

Pape

r

Colo

rCh

arac

ter

Grap

hic

Colo

rGr

aphi

cCh

arac

ter

Colo

rCh

arac

ter

Grap

hic

Mon

ochr

ome

Samsung + LED Lighting + Nu Horizons =

Innovative Lighting Solutions

LED Lighting Solutionsfrom

Samsung is committed to leading the LED lighting revolution, and Nu Horizons is committed to delivering the right solution to meet your LED project needs.

Mid-power white LEDs

High-power white LEDs

High-voltage white AC LEDs

High-voltage white DC LEDs

Light Engines and Modules

LED Tube

Let Nu Horizons be your design and manufacturing solution partner for your lighting needs. Learn more at www.nuhorizons.com/ledlighting or scan the

QR code below with your smart phone.

Design Custom LED Assembly

29

LED Components: Low power HV AC Mid power HV DC High power Flash LED

Optics: Lenses Standard products Refl ectors Custom solutions Development & deployment of new fi xtures

Light Engines: LED street light LED area light LED down light LED light strip

Thermal Management: Thermal testing Thermal management

LED Drivers Inductorless white LED drivers (for LEDs in parallel) Switching regulator based white LED drivers (for LEDs in series) Integrated Schottky diodes Accurate LED current matching Multiple output capability Topologies - Constant current source - Dimmable current source - Flyback - Boost (step-up) - Buck (Step Down) - LLC resonant topologies - SEPIC topology

Power Solutions Fully assembled and tested power solution Ruggedized products End to end solutions - AC/DC - DC/DC 6W to 320W Norms - UL1310 Class 2, UL8750, EN61347-2-13, EN61000-3-2 Class C (harmonic current) and IP64~67

System Design Nu Horizons LED Lighting Solutions - One stop solution for all your solid state lighting needs - Design - Custom LED - Assembly

S U P P L I E R N A M E S LEDs

LED

Driv

ers

Ligh

t Eng

ines

Optic

s

Pow

er S

olut

ions

Syst

em D

esig

n

Ther

mal

Man

agem

ent

Active-Semi

Allegro MicroSystems

Atmel

Endicott Research Group, Inc. (ERG)

Exar

Excelsys Technologies

GE Energy (formerly Lineage Power)

Integrated Silicon Solution, Inc. (ISSI)

IXYS (includes Clare)

LEDIL

LED Specialists

LHV Power

Linear Technology

Marvell

Mean Well

Micrel

Microsemi

N2Power

Nu Horizons LED Lighting Solutions

OPTO Electronix

Samsung LED

Sharp Microelectronics of the Americas

STMicroelectronics

Supertex

Telefunken Semiconductors

LIGHTING | SUPPLIERS BY PRODUCT CATEGORY

3030

Active Enhancements: Hi Bright Backlights (CCFL, LED)

Design Services: System Hardware & Compatibility Product Specifi cation Custom Test Set-up POC / Prototype First Article Revision Control (ECN) Engineering Evaluation Problem Resolution

Display Technologies: LCD - Active, Passive - Graphic - Color, Monochrome - Character - 3D EPD - e-Paper, e-Ink OLED - Organic Light Emitting Diode PID - Public Information Display, Signage Memory LCD

Passive Enhancements: Anti-Refl ective Anti Glare Glass / Acrylic EMI/RFI Shielding IR Blocking Film Optical Bonding Privacy Filters Protective Display Shields

Total Solutions: Display Kit Verifi cation Fully Enclosed LCD Monitors Fully Enclosed LCD Systems (Panel PC’s) LCD Testing and Screening Medical NEMA Rated Products Open Frame Confi gurations Rack and Panel Mount Assemblies

Touch Screen Integration: Capacitive Surface Acoustic Wave (SAW) IR - Infrared Touch Projected Capacitive - Extreme-Touch Resistive - 4/5/8 Wire Touch Controllers / Serial USB

Value-Add Capabilities: Class 1,000 Clean Room for all LCD Enhancements Display Inspection NVIS Night Vision Optical Glass Bonding Touch Screen Integration Functional Testing: - Power Cycling - Elevated Temperature Test - Video Testing / Calibration - Flat Panel - Pixel Screen - Extended Burn-in - Custom Test Creation / Execution - Touch Screen Calibration

DISPLAYS | SUPPLIERS BY PRODUCT CATEGORY

S U P P L I E R N A M E S Cabl

e So

lutio

ns

Disp

lays

Embe

dded

Sol

utio

ns /

Sing

le B

oard

Com

pute

rs

Inve

rter

s

LCD

Cont

rolle

r Sol

utio

ns

LCD

Mon

itors

Open

Fra

me

/ Pa

nel P

C So

lutio

ns

Touc

hscr

eens

AAEON

Amulet Technologies

Applied Concepts

Axiomtek

Connect Tech

Digi International

Digital View

Emerging Display Technologies (EDT)

Endicott Research Group, Inc. (ERG)

Estecom-USA

HanTouch USA

IEI Technology Corp.

In Touch Electronics

Kordis Media Co., Ltd.

Kyocera Display America, Inc. (formerly Optrex)

Landmark Technology

Lattice Semiconductor

Leopard Imaging

LG Display

Microsemi

NLT Technologies

Nu Horizons Custom Solutions

OSD Displays

Pervasive Displays

Pixel Qi

Quadrangle Products Inc.

Reach Technology Inc.


Tianma

Touch International

Touch Revolution

T E C H N O L O G Y I N C .

EMBEDDED SOLUTIONS / SINGLE BOARD COMPUTERS | AVAILABLE FROM NU HORIZONS

Offering Embedded Computing Platforms so that

customers have a single, reliable, cost-effective source

to a wide array of CE, FCC & UL certifi ed products.

These products include single board computers,

embedded systems and barebone systems, panel

computers, medical PC, human machine interfaces, and

network security appliances.

T E C H N O L O G Y I N C .

Supported Markets Medical

Military

Heavy Industrial

Consumer

Gaming & Entertainment

Point of Sale

Telecom

Supported Processors Intel

VIA

Xscale

Marvell

AMD

System on Module ETX

STX

Q7

COM EXPRESS

XTX

SOM Baseboards

Industrial Motherboards Mini ITX

Micro ATX

ATX

Embedded SBC Pico ITX

3.5” Capa Boards

EPIC

5.25 Boards

RISC CPU Modules

PC104

Servers Sun Micro

Super Micro

IBM

Panel PC/POS Solutions Medical Grade Touchscreen Computers

Industrial Monitors

Digital Signage

Video Wall Controllers

Heavy Industrial Monitors

Rack Consol

RISC Based monitor

Peripherals Memory (Flash, DDR, DDR2, DDR3)

Heatsink/Fan Assemblies

MiniPCI Module

SA/PCI/PCI-X riser cards

I/O cables

LCD wiring kits

Compact Flash

HDD Drives

Add on Cards LCD converter

FPGA

Video Capture

PCI-Express cards

PC104 I/O Modules

Wireless

RFID

Wireless Radio Modems

CAN Controllers

Chassis 1U to 6U

Shoe Box

Rackmount

Compact

Embedded

Power Solutions DC/DC

Open Frame

1U/2U Power supply

UPS Module

AC/DC

Software Microsoft, Linux Support

Technical Resources / Customization Resources Sheet Metail

Industrial Design

Silk Screening

Custom Enclosures

31

DISPLAYS | SUPPLIERS BY PRODUCT CATEGORY

32

AMERICAS SUPPLIER LISTING

D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level

EEmbedded Single Board Computers, Panel Appliance & Automation Solutions, Industrial System Solutions

S

Power Application Controllers (PAC), Power Management Units, DC/DC and AC/DC Converters, LED Controllers

S CBRAM (Conductive Bridging RAM), Serial Flash

SDigital Audio, Video, Sensor Products, Communications, Clock Devices, Power Devices

LS

Magnetic Linear & Angular Position Sensor ICs, Magnetic Digital Position Sensor ICs, Current Sensor ICs, Magnetic Speed Sensor ICs, Motor Driver & Interface ICs, Regulators and Lighting

DE Graphical OS Chips, Display Modules, Boards

SDynamically Programmed Analog Signal Processors (dpASP’s), Field Programmable Analog Array’s (FPAA’s)

SLWireless Sensor Network Protocol and Silicon Solution for Ultra-Low Power Networking Applications

DCCFL and EEFL Inverters, LED Display Products, Passive Display Enhancements

LS

Microcontrollers, Touch, Memory, Automotive, Wireless / RF

DE

Embedded Board & SoM, Applied Computer & Network Device, Touch Panel Computer

S

RF Semiconductors, Fiber Optic Devices, Optocoupler & Solid State Relays, MeshConnect Wireless Modules & ICs

SLSystem on a Module, ARM9/11, Cortex, Marvell ARM, PowerPC, Renesas SH, MIPS

SAudio, Imaging Solutions, Video Surveillance, Dial-Up/Embedded Modems

SLBluetooth, 802.11 Wi-Fi Modules, ZigBee, Wireless Accessories

EPC/104, PC/104-Plus, PCI/104-Express, PCI, PCI Express, CompactPCI and ISA, Digital I/O, Ethernet-to-Serial Devices

DES

Wireless & Wired Embedded Solutions, Wireless Routers & Gateways, Cellular Modems & Peripherals, Remote Display Connectivity, Single-Board Computers and Operator Interfaces

SL IP Cores and System-on-Chip Solutions

D LCD Controllers

DCSTN Modules, TFT Modules, Graphic Modules, Character Modules, Capacitive Touch

P AC Power, DC Power, Embedded Power

DL

CCFL Inverters, Smart Force™ DR, Smart Force™ CCFL, Smart Force™ LED, Smart Force™ EL, Smart Kits, DC Converters

S

ASICs, Display ICs, Interface, Microcontrollers, Network Camera, Network Control, Power Supply ICs, Print-Head ICs, Timing Products

DLCD Controller Solutions, Intelligent Panels, Digital Signage Monitors

LS Communications, Networking, Storage, Interface, Power

P High-efficiency, Low-profile Power Supplies

S Optical Components, Optical Modules

LP

AC-DC Power Supplies, DC-DC Converters, Power Modules, Power Solutions, Power Supplies

SVideo Transport, Optical Modules, Signal Integrity (also see Semtech)

D4 Wire and 5 Wire Analog Resistive, SAW (Surface Acoustic Wave) Touch Screens

SL 802.11 Wi-Fi Modules

SL Development Tools for Embedded Systems


D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level D = Displays E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level

Nu-Horizons-Electronics-Americas-Linecard-Winter-2013.indd 4 1/15/2013 4:00:03 PM

33





EEmbedded Single Board Computers, Panel Appliance & Automation Solutions, Industrial System Solutions

S

Power Application Controllers (PAC), Power Management Units, DC/DC and AC/DC Converters, LED Controllers

S CBRAM (Conductive Bridging RAM), Serial Flash

SDigital Audio, Video, Sensor Products, Communications, Clock Devices, Power Devices

LS

Magnetic Linear & Angular Position Sensor ICs, Magnetic Digital Position Sensor ICs, Current Sensor ICs, Magnetic Speed Sensor ICs, Motor Driver & Interface ICs, Regulators and Lighting

DE Graphical OS Chips, Display Modules, Boards

SDynamically Programmed Analog Signal Processors (dpASP’s), Field Programmable Analog Array’s (FPAA’s)

SLWireless Sensor Network Protocol and Silicon Solution for Ultra-Low Power Networking Applications

DCCFL and EEFL Inverters, LED Display Products, Passive Display Enhancements

LS

Microcontrollers, Touch, Memory, Automotive, Wireless / RF

DE

Embedded Board & SoM, Applied Computer & Network Device, Touch Panel Computer

S

RF Semiconductors, Fiber Optic Devices, Optocoupler & Solid State Relays, MeshConnect Wireless Modules & ICs

SLSystem on a Module, ARM9/11, Cortex, Marvell ARM, PowerPC, Renesas SH, MIPS

SAudio, Imaging Solutions, Video Surveillance, Dial-Up/Embedded Modems

SLBluetooth, 802.11 Wi-Fi Modules, ZigBee, Wireless Accessories

EPC/104, PC/104-Plus, PCI/104-Express, PCI, PCI Express, CompactPCI and ISA, Digital I/O, Ethernet-to-Serial Devices

DES

Wireless & Wired Embedded Solutions, Wireless Routers & Gateways, Cellular Modems & Peripherals, Remote Display Connectivity, Single-Board Computers and Operator Interfaces

SL IP Cores and System-on-Chip Solutions

D LCD Controllers

DCSTN Modules, TFT Modules, Graphic Modules, Character Modules, Capacitive Touch

P AC Power, DC Power, Embedded Power

DL

CCFL Inverters, Smart Force™ DR, Smart Force™ CCFL, Smart Force™ LED, Smart Force™ EL, Smart Kits, DC Converters

S

ASICs, Display ICs, Interface, Microcontrollers, Network Camera, Network Control, Power Supply ICs, Print-Head ICs, Timing Products

DLCD Controller Solutions, Intelligent Panels, Digital Signage Monitors

LS Communications, Networking, Storage, Interface, Power

P High-efficiency, Low-profile Power Supplies

S Optical Components, Optical Modules

LP

AC-DC Power Supplies, DC-DC Converters, Power Modules, Power Solutions, Power Supplies

SVideo Transport, Optical Modules, Signal Integrity (also see Semtech)

D4 Wire and 5 Wire Analog Resistive, SAW (Surface Acoustic Wave) Touch Screens

SL 802.11 Wi-Fi Modules

SL Development Tools for Embedded Systems






SLHigh-performance Video Extension and USB Extension Solutions

DE Embedded System, Single Board Computers

DTFT/AMOLED Displays, Integrated Touch Screens, High-Bright Displays

LS

DRAM and SRAM Memory, Audio Drivers, Multi-function IO Drivers, LED Drivers, Temperature Sensors

LS

ASICs, Display Products, High Voltage Devices, ICs, Laser Diode Drivers, Optocouplers, Power Products, Pulsed Power Systems, RF Power & Systems, Solar Power Products, Solid State Relays, Telecom Products

D Panels, Display Controllers, Inverters and Adapters

D

TFT LCDs, TFT LCD with LED, Touch Screen Solutions, Color Graphic LCDs, Monochrome Graphic LCDs, Character LCDs

DHigh Brightness LCD Modules, Inverters and Open Frame Industrial Monitors

S

Communications, Microcontrollers, Audio/Speech, Security, Video, DRAM, Display Drivers, Sensors, Optical Components

ES

Programmable Clock Devices, Programmable Power Manager Devices, Programmable Logic

L Semiconductor Optical Solutions

LLED Light Engines, Drivers, Modules and Design Services

ESL

Embedded High Definition Camera Design, Digital Video Camera Development, Digital PC Camera Development and High Definition Surveillance System Development

D TFT LCDs, AMOLED, EPD, 3D Displays

LP

High Voltage Power Supplies, Low Voltage Power Supplies

LS

Data Conversion, Signal Conditioning, Power Management, Interface, High Frequency & Optical, Timing


SVideo Encoders, Transcoders, Decoders, SoCs, Coprocessors

SLHigh-end Optical Imaging Lenses for Industrial, Video & Security Industries

LS

Processors, Storage, Wireless, Switching, Digital Entertainment, Broadband, PC Connectivity, Transceivers, System Controllers, Powerline Communications

LP AC/DC Power Supplies, DC/DC Power Supplies

LS Analog, High Bandwidth, Ethernet, RF Solutions

S

8, 16, 32-bit MCUs, Amplifiers, Comparators, Data Converters, Interface Devices, EEPROM, SRAM, Serial and Parallel FLASH, Motor Drivers, Power Management, RTCs, Temperature Management, Touch and Input Sensing, Wireless, Automotive, PC System and I/O Controllers

SDRAM, DRAM Modules, NAND Flash, NOR Flash, Solid State Drives, Phase Change Memory

DL

CCFL Backlight Controllers, CCFL Backlight Inverters (Single, Dual, Quad)

PS

DC/DC Converters, AC/DC Power Supplies, Digital Panel Meters, Magnetics, Data Acquisition

LP AC/DC Power Supplies, DC/DC Power Supplies

SDRAM Components (SDR, DDR, DDR2, DDR3), Mobile DRAM (LPSDR, LPDDR, LPDDR2), DDR3 SDRAM Modules

DMonochrome and Color LCDs (Resolution - QVGA to SGXGA, Size - 2.7” to 21.3”)

SBluetooth Low Energy ICs, Single Chip ANT ICs, 2.4 GHz RF ICs, Sub 1 GHz RF ICs

SAudio/Speech, Telecommunications, Microcontrollers, Bus Interface, Power Management, I/O

S Analog and CMOS Image Sensors

L LED Light Engines





DOLED/PMOLED Displays, TFT/AMLCD Displays, STN/PMLCD Displays

SPCI Express, USB, Signal Conditions, Timing, Switching, Connectivity, Power Management

D EPD (E-Paper Display)

D Sunlight Readable, Low Power Displays

S Clock Oscillators, TCXO, VCXO, OCXO, Crystals

DActive Display Cables, Passive Display Cables, EL Display Cables, Inverter Input Cables

DE T E C H N O L O G Y I N C .

Enclosed Units, Display Modules, Controller Boards

SL 802.11 Wi-Fi Chipsets and Modules

SMCU & MPU, ASSP, Display Modules, Discretes, Standard ICs, Memory

SLWireless RF Transmitter, Receiver and Transceiver Modules

L

LED Modules/Arrays, LED Tube, Outdoor Lighting, BLU, Automotive, Middle Power LEDs, High Power LEDs, Flash LEDs

S Crystals & Oscillators

SDiodes, Bi-polar and MOSFET Transistors for High Reliability Applications

S

Power Management, ESD Protection, Timing and Synchronization, Optical Transport Equipment (SerDes), HiRel MIL, Low-Power RF, Digital Sensor/Signal Conditioning ICs (also see Gennum)

DLS

LCDs, Lighting, Memory, Optolectronics, Power Devices

S WirelessHD, HDMI, MHL, DVI, Storage, Video Processors

S Mobile Storage, Multimedia SoCs, Mobile Communications

LS

Analog, MEMs, Power, Automotive, Entertainment, Connectivity, Microcontrollers, Memory

SL High Performance Storage & I/O Connectivity products

LS

LED Drivers, Electroluminescent Lamp Drivers, Medical Ultrasound, High Voltage Interface/Driver ICs

P DC/DC Power Converters, EMI Filters, AC/DC Power Supplies

LS

AC-DC Off-line, DC-DC Switching Regulators, High Voltage Gate Drivers, Interface, System Test

D

Passive Color LCD Modules, Active Color LCD Modules, Graphic Type Monochrome LCD Modules, Character Type Monochrome LCD Modules

DCapacitive Touch Screens, Resistive Sensors, Glass Filter Products

DProjected Capacitive Touch, Monitors, Displays, Embedded Solutions

SMobile RAM, Specialty DRAM, Graphics DRAM, Flash Memory

STransformers, Custom Magnetics, EMC Ferrites, Inductors, RF Components

P AC/DC Power Supplies, DC/DC Power Supplies


34



35





S Mobile Storage, Multimedia SoCs, Mobile Communications

LS

Analog, MEMs, Power, Automotive, Entertainment, Connectivity, Microcontrollers, Memory

SL High Performance Storage & I/O Connectivity products

LS

LED Drivers, Electroluminescent Lamp Drivers, Medical Ultrasound, High Voltage Interface/Driver ICs

P DC/DC Power Converters, EMI Filters, AC/DC Power Supplies

LS

AC-DC Off-line, DC-DC Switching Regulators, High Voltage Gate Drivers, Interface, System Test

D

Passive Color LCD Modules, Active Color LCD Modules, Graphic Type Monochrome LCD Modules, Character Type Monochrome LCD Modules

DCapacitive Touch Screens, Resistive Sensors, Glass Filter Products

DProjected Capacitive Touch, Monitors, Displays, Embedded Solutions

SMobile RAM, Specialty DRAM, Graphics DRAM, Flash Memory

STransformers, Custom Magnetics, EMC Ferrites, Inductors, RF Components

P AC/DC Power Supplies, DC/DC Power Supplies

SEMICONDUCTORS / POWER | SUPPLIERS BY PRODUCT CATEGORY

E = Embedded L = Lighting P = Power S = Semiconductors SL = System-Level

S U P P L I E R N A M E S Audi

o / V

ideo

Bus

Inte

rfac

e

Conv

erte

rs

Data

com

Disk

/ In

terf

ace

Logi

c

Mem

ory

Opto

elec

tron

ics

Phys

ical

Lay

er

Pow

er &

Bat

tery

Man

agem

ent

Pow

er S

uppl

ies

Proc

esso

r

Sens

or &

Imag

ing

Arra

ys

Sign

al C

ondi

tioni

ng

Syst

em M

onito

ring

Tele

com

Tim

ing

Wire

less

Active -Semi

Adesto Technologies

AKM Semiconductor

Allegro MicroSystems

Anadigm

Atmel

California Eastern Laboratories (CEL)

Conexant

Digi

Emerson Network Power

Exar

Excelsys Technologies

Finisar

GE Energy (formerly Lineage Power)

Gennum (SemTech)

Integrated Silicon Solution, Inc. (ISSI)

IXYS (includes Clare)

Lapis Semiconductor (formerly OKI Semi)

Lattice Semiconductor

LHV Power

Linear Technology

Magnum Semiconductor

Marvell

Mean Well

Micrel

Microchip (includes SMSC)

Micron

Murata Power Solutions

N2Power

Nanya Technology Corporation

Nordic Semiconductor

Nuvoton

OmniVision

Pericom

Pletronics (PLE)

Renesas

Samsung LED

SaRonix-eCera

Semicoa

Semtech (includes Gennum)


Silicon Image

Silicon Motion

STMicroelectronics

Supertex

SynQor

Winbond

Telefunken Semiconductors

Würth Midcom

Zippy


SEMICONDUCTORS / POWER | SUPPLIERS BY PRODUCT CATEGORY

LabCam delivers online training opportunities in a way that recognizes the value of engineers’ time. As easily as You Tube® videos, engineers can quickly load and watch videos from industry leaders consisting of insights on products, evaluation kit overviews, end-user applications and more. Each tutorial is up to ten minutes in length and features technology experts, CEOs and/or peers introducing new solutions or explaining integral aspects of an important product, solution or application. This free value-added program is packaged for short, informative and high quality distance learning.

Nu Horizons is proud to present our education and training program, which offers engineers the opportunity to participate in technical seminars conducted by experts focused on the latest technologies from our leading suppliers. This program provides higher velocity learning to help minimize start-up time to quickly begin your design process utilizing the latest development tools, software and products. Check online for the latest seminar schedule.

In order to simplify the design process, Nu Horizons has created a series of application notes designed to guide engineers through the process of interfacing different devices together. Using a detailed step-by-step approach, these design guides identify key elements in the design process. Topics in the application notes are organized by design task and each topic is a stand-alone section, with a short introduction or overview, followed by the step-by-step design guidelines. All steps include a suffi cient level of detail to provide the designer with relevant information to proceed quickly and easily from start to fi nish.

Nu Horizons offers a wide range of development / evaluation boards, tools and kits featuring the latest technology from the most trusted suppliers in the industry. Visit the development tool section of our website for a variety of solutions all aimed at providing a low-cost solution for designers to accelerate a product’s time-to-market.

www.nuhorizons.com/labcam

www.nuhorizons.com/seminars

www.nuhorizons.com/appnoteswww.nuhorizons.com/appnotes

Application Notes

DevelopmentTools

www.nuhorizons.com/devtoolswww.nuhorizons.com/devtoolswww.nuhorizons.com/devtoolswww.nuhorizons.com/devtools

Portal is a quarterly publication containing new products, technologies and development tools available from Nu Horizons leading suppliers. Portal is availabe both in print and on the web. Sign up online to receive your copy, be notifi ed of upcoming issues or to request samples of the products found inside.

www.nuhorizons.com/portal

Enhance Your Design...WITH NU HORIZONS EDUCATION AND DEVELOPMENT SOLUTIONS

facebook.com/nuhorizonselectronics

twitter.com/nuhorizons

linkedin.com/in/nuhorizons

youtube.com/nuhorizonsvideo

nu horizons q1 2013 edition of portal

Documents