nss evo2 rtm software release - seawide tech bulletins.pdfnss evo2 rtm-3.0 software release product:...

of 4

TB-108 / July 2015

NSS evo2 RTM-3.0 Software Release Product: NSS evo2 all models

Product Description: NSS evo2 Multi-function displays

Software Version: NSS_evo2-3.0-52.1.103-32282-r1

Effective Date: July 2015

Inspect/Update Current Inventory: Yes

Simrad® is pleased to announce that new software has been released for all NSS evo2 multifunction displays. This is a major release that incorporates some great new features and improvements. The software, NSS_evo2-3.0-52.1.103-32282-r1-Standard-1.upd, can be downloaded from the NSS evo2 downloads page on the simrad-yachting.com website.

New Features

Performance Indicator RTM-3.0 includes a new Cruise Performance Indicator that can be placed on the instrument bar for tuning-in trim and engine economy while underway.

NAC-1 autopilot support

Software support for control for the new NAC-1 autopilot for outboard-powered vessels.

Jeppesen MAX-N+ 2015 charting features

Full-Featured Vector Charts: Chart detail including Depth Areas and Contours, Spot Soundings, NavAids, Light Sectors, Wrecks/Obstructions, Small Craft Facilities and more.

Aerial Photos: High-Definition Photos & Diagrams of ports, marinas and significant navigational marks.

Satellite: High-resolution satellite imagery provides real-world reference, enhances situational awareness for coastal navigation.

Custom Shaded Depths: Shaded depths make it easy to distinguish different water depths.

Dynamic Raster: Traditional “paper chart” look with unique ability to access information on buoys, lights and other details.

Easy Routing: Automatically plots the shortest, safest route based on detailed chart data and vessel information. *Available only with MAX-N+ outside the Americas.

Tides & Currents: Presents the time, water level and direction of tides with Tide Level graphs and indicates predicted current time, direction and strength of currents with Current Flow graphs and colored arrows.

Harbor and Approach Details: Lets boaters approach any harbor and inlet with confidence.

http://www.simrad-yachting/

of 4

Detailed Marina Port Plans: Docking in an unfamiliar port is no problem, when you have precise layouts of thousands of marinas, including slip spaces, restricted areas, and other valuable navigation information.

Mercury Integration features

SmartTow® can now be controlled from NSS evo2 displays when connected to a VesselView® 4 or 7 and a supporting engine.

SmartCraft® Descriptive Fault Text Unlocked: Previously descriptive fault text was only available on VesselView displays.

Password protection for system settings

RTM 3.0 includes an optional PIN protection feature for system settings, files and GoFree™ Shop access. A PIN code can be applied under HOME>SETTINGS>PIN CODE. The PIN code is a 4-digit number and if forgotten the user will either need to perform a hard reset or contact customer support for an unlock code.

HALO™ Integration

RTM-3.0 brings the latest Radar feature set to get the most from your HALO™ Radar.

Usage modes now include Harbour, Offshore, Weather and Bird mode.

PPI Sector blanking.

Radar System Data (RSD)

RSD (Radar System Data) NMEA0183 output message is used to output the cursor position from the radar PPI. The message can be sent to an external piece of targeting equipment such as a night-vision camera with panning capabilities to seek out the position of a chosen target.

Instrument bar groups

There are now new pre-configured data bar pages. Cruise, Fishing, Anchor, Fuel and General. These can be set relevant to each page or split. Each of these can be configured. Note: The former Global Instrument bar set prior to the upgrade is now saved under “General”. The Default Instrument bar after the upgrade is Cruise.

Fixes and Improvements

Lockup on start up An issue was identified on some NSSevo2 displays that resulted in the unit reaching the boot splash screen, locking up then rebooting. This issue has been resolved in RTM 3.0.

Touch screen improvements Improvements have been made to the touch screen drivers to resolve intermittent touch on some NSS evo2 displays and better resistance against false touches from water.

of 4

Incorrect sonar water temperature An issue has been reported when using Airmar CHIRP transducers connected to the NSSevo2 Combo. This can effect transducers that have a digital temperature sensor. The issue results in the maximum temperature value 55°C (131°F) being constantly displayed on the screen. Note: If the transducer is connected to another Echo sounder module on the network such as BSM-2, BSM-3 or SonarHub. This will require its own software upgrade. Please download from the Simrad-yachting.com website.

WIFI-1

Software: RTM-3.0 has an important software upgrade for the WIFI-1 module built in. After RTM-3.0 has been installed the NSS evo2 will update any WiFI-1 units on the Ethernet network. Follow the onscreen directions. Power cycle the WiFi-1 module after the upgrade. WIFI-1 Second Ethernet Port: New features on the MFD such as connecting to Internet hotspots require the WIFI-1 device to power cycle between modes. This will cause any Ethernet device connected to the WIFI-1 second port to be temporarily disconnected from the network when powering on or changing mode. For this reason we do not recommend using the WIFI-1 as a network switch.

Improved Ethernet Network Stability

BSM-3: Improvements have been made in the way NSS evo2 re-acquires the BSM-3 as the echo sounder source after power cycle. Radar: Improvements to Ethernet network connectivity to avoid the “NO RADAR” message using 3G, 4G and Halo Radars. ForwardScan: Resolved an issue where in some circumstances ForwardScan would show a “No Source” message. Note: If ForwardScan transducer is connected to a SonarHub. The SonarHub module will require an update. Download the file Sonar_Hub-3.0-52.1.103-32282-r1-Standard-1.riw from the Simrad-yachting.com website.

Power control setting

The default (Factory Reset) setting for Power Control has now changed from Slave to Master. The setting change will apply to new factory units or when the unit has been reset to factory defaults

Change in update procedure

There is slight change to the behavior of the update process. Once this update has been applied;

The display will restart and will now bypass the “Update selection” menu.

On some displays the unit will then perform a touch calibration which will have a prompt not to touch the screen. This will take a few seconds and reboot afterwards. Do not touch the display during this touch screen calibration. This step only happens

during this update.

of 4

Known Issues Listed below are a number of issues we are aware of but were not fixed in time for this release. We are working hard on to resolve these issues for the next release of software later in the year.

Import of large user data files can cause a lowering of performance.

Persistent Jeppesen message appearing on start-up if C-MAP chart card is used.

Sonar source changes automatically to first available sonar source on start-up if nominated sounder is off line. Next release will not change source.

Pulse radar Manual Tune settings not retained: Magnetron hours reported incorrect

SETTINGS>ADVANCED>FEATRUES. Changes made are not retained after a power cycle.

Issues displaying NSOevo2 on to some third party monitors.

AIS TCPA/CPA information not appearing when used with some AIS receivers.

When running sonar in a split zoom view, the zoom window will automatically jump to the bottom of the screen if the sounder gets a bottom lock.

SonarHub settings do not persist after a power cycle.

Instances of dual chart split screen both with Sirius weather overlay over Navionics chart can cause an MFD to crash.

For More Information: U.S. Based Resellers Technical and Order Support: (800) 324-4737 Canada Based Resellers Technical Support: (855) 361-1564

You may also send any inquiries via email to the addresses listed below, according to your sales-group classification:

OEM/Boatbuilder – [email protected] International/Latin America – [email protected] National Retail – [email protected] Dealers/Distributors – [email protected]

mailto:[email protected]




of 4

TB-109 / July 2015

NSO evo2 RTM-4.0 Software Release Product: NSO evo2

Product Description: NSO evo2 Processors

Software Version: NSO_evo2-4.0-52.1.103 Effective Date: July 2015


Simrad® is pleased to announce that new software has been released for all NSO evo2 multifunction displays. This is a major release that incorporates some great new features and improvements. The software, NSO_evo2-4.0-52.1.103-32282-r1-Standard-1.upd, can be downloaded from the NSO evo2 downloads page on the Simrad-yachting.com website.

New Features

Performance Indicator RTM-4.0 includes a new Cruise Performance Indicator that can be placed on the instrument bar for tuning-in trim and engine economy while underway.

NAC-1 autopilot support

Software support for control for the new NAC-1 autopilot for outboard-powered vessels.

Jeppesen MAX-N+ 2015 charting features

Full-Featured Vector Charts: Chart detail including Depth Areas and Contours, Spot Soundings, NavAids, Light Sectors, Wrecks/Obstructions, Small Craft Facilities and more.

Aerial Photos: High-Definition Photos & Diagrams of ports, marinas and significant navigational marks.

Satellite: High-resolution satellite imagery provides real-world reference, enhances situational awareness for coastal navigation.

Custom Shaded Depths: Shaded depths make it easy to distinguish different water depths.

Dynamic Raster: Traditional “paper chart” look with unique ability to access information on buoys, lights and other details.

Easy Routing: Automatically plots the shortest, safest route based on detailed chart data and vessel information. * Available only with MAX-N+ outside the Americas.

Tides & Currents: Presents the time, water level and direction of tides with Tide Level graphs and indicates predicted current time, direction and strength of currents with Current Flow graphs and colored arrows.

Harbor and Approach Details: Lets boaters approach any harbor and inlet with confidence.


of 4

Detailed Marina Port Plans: Docking in an unfamiliar port is no problem, when you have precise layouts of thousands of marinas, including slip spaces, restricted areas, and other valuable navigation information.

Mercury Integration features

SmartTow® can now be controlled from NSO evo2 displays when connected to a VesselView® 4 or 7 and a supporting engine.

SmartCraft® Descriptive Fault Text Unlocked: Previously descriptive fault text was only available on VesselView displays.

Password protection for system settings

RTM-4.0 includes an optional PIN protection feature for system settings, files and GoFree™ Shop access. A PIN code can be applied under HOME>SETTINGS>PIN CODE. The PIN code is a 4-digit number and if forgotten the user will either need to perform a hard reset or contact customer support for an unlock code.

HALO™ Integration

RTM-4.0 brings the latest Radar feature set to get the most from your HALO™ Radar.

Usage modes now include Harbour, Offshore, Weather and Bird mode.

PPI Sector blanking.

Radar System Data (RSD)

RSD (Radar System Data) NMEA0183 output message is used to output the cursor position from the radar PPI. The message can be sent to an external piece of targeting equipment such as a night-vision camera with panning capabilities to seek out the position of a chosen target.

Instrument bar groups

There are now new pre-configured data bar pages. Cruise, Fishing, Anchor, Fuel and General. These can be set relevant to each page or split. Each of these can be configured. Note: The former Global Instrument bar set prior to the upgrade is now saved under “General”. The Default Instrument bar after the upgrade is Cruise.


Lockup on start up An issue was identified on some NSO evo2 processors that resulted in the unit reaching the boot splash screen, locking up then rebooting. This issue has been resolved in RTM-4.0.

Touch screen improvements Improvements have been made to the touch screen drivers.

WIFI-1

of 4

Software: RTM-4.0 has an important software upgrade for the WIFI-1 module built in. After RTM-4.0 has been installed the NSO evo2 will update any WiFI-1 units on the Ethernet network. Follow the onscreen directions. Power cycle the WiFi-1 module after the upgrade. WIFI-1 Second Ethernet Port: New features on the MFD such as connecting to Internet hotspots require the WIFI-1 device to power cycle between modes. This will cause any Ethernet device connected to the WIFI-1 second port to be temporarily disconnected from the network when powering on or changing mode. We do not recommend using the WIFI-1 as a network switch.

Improved Ethernet Network Stability

BSM-3: Improvements have been made in the way NSO evo2 re-acquires the BSM-3 as the echo sounder source after power cycle. Radar: Improvements to Ethernet network connectivity to avoid the “NO RADAR” message using 3G, 4G and Halo Radars. ForwardScan: Resolved an issue where in some circumstances ForwardScan would show a “No Source” message. Note: If ForwardScan transducer is connected to a SonarHub. The SonarHub module will require an update. Download the file Sonar_Hub-3.0-52.1.103-32282-r1-Standard-1.riw from the Simrad-yachting.com website.

Power control setting

The default (Factory Reset) setting for Power Control has now changed from Slave to Master. After this upgrade NSO processor will be set as Power Control Master. Units that were set to slave prior to the upgrade can be reset under HOME>SETTINGS>POWER CONTROL.

Change in update procedure

There is slight change to the behavior of the update process. Once this update has been applied;

The display will restart and will now bypass the “Update selection” menu.

Known Issues Listed below are a number of issues we are aware of but were not fixed in time for this release. We are working hard on to resolve these issues for the next release of software later in the year.

Import of large user data files can cause a lowering of performance.

Persistent Jeppesen message appearing on start-up if C-MAP chart card is used.

Sonar source changes automatically to first available sonar source on start-up if nominated sounder is off line. Next release will not change source.

Pulse radar Manual Tune settings not retained: Magnetron hours reported incorrect

SETTINGS>ADVANCED>FEATRUES. Changes made are not retained after a power cycle.

Issues displaying NSOevo2 on to some third party monitors.

AIS TCPA/CPA information not appearing when used with some AIS receivers.

When running sonar in a split zoom view, the zoom window will automatically jump to the bottom of the screen if the sounder gets a bottom lock.

SonarHub settings do not persist after a power cycle.

of 4

Instances of dual chart split screen both with Sirius weather overlay over Navionics chart can cause an MFD to crash








of 2

TB-110 / July 2015

SonarHub™ 3.0 Software Update

Product: 000-11142-001

Product Description: SonarHub Module

Software Version: 3.0



We are pleased to announce that new software has been released for the SonarHub™ module. This is a major release that incorporates important improvements.

The software, Sonar_Hub-3.0-52.1.103.riw, can be downloaded from the SonarHub downloads page on the Simrad, Lowrance and B&G websites.


ForwardScan™ compatibly (Simrad and B&G)

If a Simrad® evo2 or B&G Zeus2 Multi-Function-display has been updated to the latest version of

software (52.1.103 or later); This version of SonarHub software is required if a ForwardScan

transducer is connected to the SonarHub. Without this upgrade the ForwardScan feature will not

work.

Invalid or no temperature readings

Certain Airmar® CHIRP transducers that have a digital temperature sensor are known to at times

output an invalid signal resulting with either a reading of 55°C (131°F) or no temperature (“_ _

_”). This version of software will resolve this issue if the transducer is connected to the

SonarHub.

Low CHIRP Performance

In some installations, SonarHub modules running in Low CHIRP for extended periods of time may

decrease in performance. The performance issue with low CHIRP has now been resolved with

this update for SonarHub.

of 2

Echo sounder split screen usability issue

When running an Echo + Echo split screen on a Simrad or B&G MFD, the right hand side of the

split screen can stop scrolling, while leaving the left hand side operating. This has been resolved

with SonarHub v3.0.

Note: Total resolution of this issue also requires that the Simrad or B&G MFD is upgraded to

version 52.1.103 or later.








of 5

TB-111 / July 2015

MO16, 19 and 24 Software Release Product: MO16, 19 and 24 T&P

Product Description: 000-11260-001 MO16-T

000-11262-001 MO19-T

000-11264-001 MO24-T

000-11261-001 MO16-P

000-11263-001 MO19-P

000-11265-001 MO24-P

Software Version: MCU 1_4_02_00

FSU 1_0_03_00



Simrad® is pleased to announce that new software has been released for the MO range of widescreen monitors. This release incorporates some important improvements. The software upgrade is comprised of two upgrade files.

One is for the BIOS or MCU (main control unit).

The other is a FSU (Full System Update) which contains all three software components to update the Boot Loader, MCU and OSD (On Screen Display)"

The two files MUST be installed in sequential order.

First: MO16 19 24 - MCU 1_4_02_00.swup Second: MO16 19 24 - FSU 1_0_03_00.swup

The two files will be rolled into one .Zip file called MO16_19_24_MCU_FSU.zip. The software can be downloaded from the MO Monitor downloads page on the Simrad-yachting.com website.

Improvements

Touch control. (MOxx-T models) Improvements have been made to the serial touch control to address reported issues of low sensitivity, intermittent touch, touch not working at startup, or taking a long time to become active.

Alarm Resolves an issue where the monitors alarm buzzer continues to sound after the NSO has been powered off.

Brightness control

This software will resolve backlight dimming issues experienced by some users.


of 5

Upgrade Instructions

Before commencing with the upgrade it is recommended that network traffic is minimized by de-powering unnecessary devices such as AIS transponders, and multifunction displays.

Upgrades must be performed dock side and not whilst the vessel is underway. Some NMEA 2000 devices will go into maintenance mode during the upgrade and will be off line.

Make sure all monitors to be upgrades are connected to the NMEA 2000 network.

Download the zipped software package from Simrad-yachting.com Unzip the two files to the root of a media card (SD card for NSO, micro SD for NSS) The Updaters can be run from any Simrad MFD that is on the same NMEA 2000 network as the MO Monitor. If there is another MFD other than an NSO it is recommended to run the updater from that MFD.

How to check current versions Before upgrading please make a note of the current versions of the monitor.

1. Press the power button on the monitor to bring up the OSD (On Screen Display) 2. Press down arrow to select CONFIGURATION 3. The software versions in the example below are

a. OSD 1.8.2 b. BIOS 1.3.3

of 5

DO THIS FIRST! First run the BIOS updater file “MO16 19 24 - MCU 1_4_02_00.swup”

Only apply this upgrade file to one monitor at a time. (Multiple monitors on a network can be powered on but only one monitor at a time should be selected before starting the upgrade).

1. Insert the media card into the card reader of an MFD or NSO evo2 processor. 2. From the HOME page select FILES. 3. Select the media card that holds the upgrade files. 4. Select the upgrade file “MO16 19 24 - MCU 1_4_02_00.swup”.

5. Select UPGRADE to continue.

6. Select the monitor to upgrade (make sure only one is selected). Then select Start upgrade

(OP40 press MENU> then select start upgrade).

7. The Upgrade process of the BIOS only takes a short time indicated by a process bar.

8. Once complete acknowledge upgrade successful message. 9. The LED on the monitor will continue to flash for approximately 45 seconds after which the

monitor (not the NSO) will automatically restart. 10. Press X to exit installer page. 11. Apply to the next monitor.

of 5

Second run the FSU updater file “MO16 19 24 - FSU 1_0_03_00.swup” Make sure you have upgraded the BIOS (MCU 1.4.2 or later) as above.

This Upgrade can be applied to multiple monitors on the network at the same time (up to six monitors).

1. Insert the media card in to the card reader of an MFD or NSO evo2 processor. 2. From the HOME page select FILES. 3. Select the media card that holds the upgrade files. 4. Select the upgrade file “MO16 19 24 - FSU 1_0_03_00.swup”. 5. Select UPGRADE to continue. 6. Select the monitor(s) to upgrade (you can select up to six monitors at a time). Then select Start

upgrade.

7. This process will take about twenty minutes to upgrade one monitor. Allow for an extra ten

minutes for each additional monitor that is selected to be upgraded. Please be patient. It is important not to remove power to the system at this stage.

8. As each monitor is upgrading the red LED status light will flash. 9. Once complete acknowledge upgrade successful message. 10. The LED on the monitor will continue to flash for approximately 45 seconds after which the

monitor (not the NSO) will automatically restart. 11. Press X to exit installer page.

Recheck the software versions

After applying both upgrades. Recheck the version numbers.

1. Press the power button on the monitor to bring up the OSD (On Screen Display). 2. Press down arrow to select CONFIGURATION. 3. The new software versions displayed should be

a. OSD Should now be 1.9.2 b. The BIOS should now be 1.4.2

of 5








of 2

TB-112 / July 2015

Updated Part Numbers for HD Radar Processor Boxes Product: 6 kW AA010014, 10kW AA010015, 25 kW AA010016

Product Description: 6, 10 and 25 kW HD Radar Processors

Software Version: 1.8.318

Effective Date: August 3, 2015

Inspect/Update Current Inventory: No

Simrad® is updating the part numbers for radar processors of Simrad HD Radars, effective immediately.

An important upgrade is required to the OS (operating system) of the HD Radar Processor box to better support radar connectivity to the latest multifunction displays. This update is for the radar processor box and is only possible at the factory level. The Radar antenna is not affected.

To allow Simrad service and the dealer network to easily track the processor boxes with the new OS, new part numbers have been created as follows;

The following radar bundles will have their kit contents updated to include the new processor part number;

Old PN Old PN Description → New PN New PN Description

AA010014 6kW Navico Radar Black box Processr pack → 000-12591-001 6KW RADAR PROCESSOR BOX (WINCE UPGRADE)

AA010015 NAVICO 10 KW RADAR PROCESSOR → 000-12592-001 10KW RADAR PROCESSOR BOX (WINCE UPGRADE)

AA010016 NAVICO 25 KW RADAR PROCESSOR → 000-12593-001 25KW RADAR PROCESSOR BOX (WINCE UPGRADE)

Kit PN Kit Description

TX06S-1 TX06S-1 6 kW

000-11477-001 TXL-10S-4 LOW EMSN

000-11478-001 TXL-10S-6 LOW EMSN

000-11476-001 TXL-25S-7 LOW EMSN

of 2

The updated radar processor MFD compatibility is as follows;

*For legacy 6000/6100 “In Service” replacement, please contact Navico Technical support. Service inventory of the existing radar processors has been retained for this purpose.

If you are experiencing any occurrences of a “No Radar” Error, please contact Navico technical support to arrange a replacement processor.




Brand Product Comaptibilty with new Processors

Simrad All NSO Compatible

Simrad All NSS Compatible

Simrad All NX Compatible

B&G All Zeus Compatible

Lowrance All HDS Compatible

Navman 8120/8084 Compatible

Northstar 8000i Compatible

Northstar M121/M84 Compatible

Northstar 6000/6100i* Not Compatible*





nss evo2 rtm software release - seawide tech bulletins.pdfnss evo2 rtm-3.0 software release product:...

Documents