Unpacking & Handling Use care when unpacking an IntellisysTM Pendulum Valve. Never lift by the Actuator or Motor. Lift only by the body edges. Aluminum surfaces can scratch easily. A static-safe, particle-free work surface is recommended. There is no need to remove parts during installation or inspection.

Check The Package Contents: • IntellisysTM Throttling Pendulum Valve (TPV)

NOTE: IQ-series controllers are mounted directly to the TPV actuator • This Quick-Start Guide

Serial Label A Serial Label on the bag shows the model number and serial number of your product. Additionally, Model, Serial and Date Codes are engraved, and an inspection sticker is affixed to the side of the valve.

Warranty Nor-Cal Products IntellisysTM Controllers and valves are warranted against defects and material workmanship for a period of 12 months after the date of shipment to the buyer. For complete warranty and Intellectual Property details, please refer to the full manual.

Pre-Installation Functionality Check Refer to the diagrams & photographs on the back of this sheet for locations of the items that follow.

WARNING: The valve plate movement presents a severe pinching/crushing hazard. Please keep fingers, hands and other objects away from the valve opening and associated moving parts.

Motor-Driven Throttling Pendulum Valves (TPV) Connect Power and Valve Cables Connect the APC controller to the valve motor with a Nor-Cal Products TBV-CRD series cable. (NOTE: IQ-series valves do not require a valve cable connection, as the motor is integrated into the controller.) Connect the controller to an appropriate power source. Toggle the power switch (if applicable) or apply DC power from your source.

Initialize the Valve From the tool software, send the appropriate initialization command to begin initialization. During Initialization, the valve will complete a 30-second initialization sequence during which the valve plate will cycle back-and-forth several times. The valve will eventually stop in the open position, unless specified otherwise by the firmware.

Open/Close Testing Verification of the system communications can be done by toggling the “OPEN / CLOSE” switch (if available) on the controller front panel, or sending the appropriate command from the tool software. If the valve does not operate as described, please contact Nor-Cal Products technical support.

Body Engraving Inspection Sticker Serial Label

Obtaining Complete Manuals Scan this QR Code to download the TPV Operator's Manual or visit www.n-c.com. Click Support, choose Product Catalogs and Support Documentation from the drop-down menu, and pick Downstream Pressure Control and locate document under Operator's Manuals.

IntellisysTM Throttling Pendulum Valve (TPV) Quick-Start Guide 160mm, 200mm, 250mm, 300mm, 320mm, 350mm Throttling Pendulum Gate Valves

2006/42/EC

Nor-Cal Products, Inc., 1967 South Oregon St., Yreka, CA 96097 USA • 1-800-824-416677-00049 © Nor-Cal Products, Inc. REV A-A

Manufacturer's Declarationas defined by the directive relating to machinery 2006/42/EC

We, Nor-Cal Products, hereby declare that the product complies with and fulfills the relevant provisions of the machinery directive 2006/42/EC.

TPV-IQD

TPV with Motor Drive TPV’s with standard motor drives connect to APC buried-box controllers (APC-x00A, x00LA, x50A) through a Nor-Cal TBV-CRD series Valve Cable.

Connections & Interfaces: Throttle Valve (TPV)

Description Pin Power V- 11 Power V+ 12 Chassis GRND 25

Auxiliary Description Pin

Power V- 5 Power V+ 7 Chassis GRND 15

IQD

IQA

Standard Motor Drive

Connections TPV-IQA The IQA receives DC power t hrough the ANALOG/TTL port or the AUXILIARY port.

V+ V- Gnd

24 VD

C (+/- 10%

) 4-A

mp

Pow

er Supply

(Custom

er furnished)

The IQD receives D C power t hrough the AUXILIARY port or t he DeviceNet Connector.

V+ V- Gnd

24 VD

C (+/- 10%

) 4-A

mp

Pow

er Supply

(Custom

er furnished)

Valve Cable Connector

Nor-Cal Products, Inc., 1967 South Oregon St., Yreka, CA 96097 USA • 1-800-824-416677-00049 © Nor-Cal Products, Inc. REV A-A

DeviceNet Refer to the DeviceNet specification for proper connections.

Auxiliary Description Pin

Power V- 5 Power V+ 7 Chassis GRND 15

Analog/TTL

TPV with IQ+ Drive The IQD receives D C power t hrough the AUXILIARY port or t heDeviceNet Connector.

IntellisysTM Throttling Pendulum Valve (TPV) Quick-Start Guide 160mm, 200mm, 250mm, 300mm, 320mm, 350mm Throttling Pendulum Gate Valves