nonlinear optical effects in fibersece-research.unm.edu/hayat/ece565/mod2_d.pdf · nonlinear...
TRANSCRIPT
![Page 1: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/1.jpg)
Nonlinear Optical Effects in Fibers• NLO effects are manifested as attenuation, phase shifts, or wavelength conversion effects, and become stronger with increasing light intensity. The glass materials usually used forfibers exhibit very small “intrinsic” nonlinearities.
• Nevertheless, the magnitude with which a nonlinear effect manifests itself is proportional to 3 factors: the size of the nonlinearity, the intensity of the radiation (light), and the interaction length.
• Because of the latter 2 factors, esp. the interaction length (limited normally by focusing geometries and by attenuation), optical fibers can manifest extremely strong nonlinear behavior,which can limit the BL products for optical communication applications.
![Page 2: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/2.jpg)
Dominant Nonlinear Optical Effects in Telecom Fibers
Stimulated Brillouin scatteringStimulated
“inelastic” light scattering
Nonlinear optical effects Nonlinear phase modulation
Four-wave mixing
Stimulated Raman scattering
Self-phase modulation
Cross-phase modulation
Note that all the above effects are due to 3rd order nonlinearities, since 2nd order NLs are negligible in centrosymmetric media (the glass materials used to make fibers are nearly-perfectly isotropic, thus they are centrosymmetric)
![Page 3: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/3.jpg)
Stimulated Brillouin Scattering
kA
Stokes scattering
θ
kp
ks
Energy conservation: sp Ω−Ω=Ω
Momentum conservation: spA kkk −=
Dispersion relation: AA vk /Ω=
The acoustic frequency: )2/sin(2 θpAAA kvvk ==Ω
0=Ω:0=θ
pAB kv2=Ω=Ω:πθ =
pABB vn λπν /22/ =Ω=The Brillouin shift:
For 45.1=nskmvA /96.5=mp µλ 55.1= GHzB 1.11=ν
![Page 4: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/4.jpg)
Stimulated Brillouin Scattering
Spontaneously Scattered waves (ΩB)
Sound waves (ΩA)
Enhance
Beating term (ΩA)
Pump (Ωp)
The feedback process is governed by:
Ip and Is are the intensity of the pump and Stokes fields, gB is the SBS gain, and αp and αsaccount for fiber losses
Scattered waves (ΩB)Enhance
⎪⎪⎩
⎪⎪⎨
⎧
−=−
−−=
ssspBs
ppspBp
IIIgdzdI
IIIgdzdI
α
α
),/exp( BTt−If the acoustic waves decay as
The Brillouin gain is frequency dependent
22)(1)()(
BB
BBB T
ggΩ−Ω+Ω
=Ω
The peak value of Brillouin gain is depends on various material parameters such as the density and the elasto-optic coefficient.
For Silica fibers WmgB /105 11−×≈
![Page 5: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/5.jpg)
Stimulated Brillouin Scattering
The threshold power: 21/ ≈effeffthB ALPg
Brillouin-gain spectra measured using a 1.525-µm pump for three fibers with different germania doping: (a) silica-core fiber; (b) depressed-cladding fiber; (c) dispersion-shifted fiber.
αα /)]exp(1[ LLeff −−=2wAeff π=
SBS gain bandwidth of silica fiber is larger than that of bulk silica
A part of this increase is due to the guided nature of acoustic modes in optical fibers
Most of the increase can be attributed to variations in the core diameter along the fiber length.
The difference of SBS gain bandwidth between fibers can exceed 100MHz
Typical value ~50MHz for wavelength near 1.55 µm
mWPth 5~
![Page 6: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/6.jpg)
Stimulated Raman Scattering
Spontaneously Scattered waves (ΩR)
Molecular oscillations (ΩO)
Beating term (ΩO)
EnhancePump (Ωp)
The feedback process is governed by:
Ip and Is are the intensity of the pump and Stokes fields, gR is the SRS gain, and αp and αsaccount for fiber losses
Scattered waves (ΩR)Enhance
⎪⎪⎩
⎪⎪⎨
⎧
−=
−−=
ssspRs
ppspRp
IIIgdzdI
IIIgdzdI
α
α
Energy levels participating in the SRS process
For Silica fibers
mWmgR µ1@/101 13−×≈
mWmgR µ55.1@/106 13−×≈
![Page 7: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/7.jpg)
Stimulated Raman ScatteringSRS gain bandwidth of silica fiber
exceeds 10 THz
The broadband and multipeak nature of the spectrum is due to the amorphous nature of glass
The maximum gain occurs when the Raman shift is about 13 THz.
Raman gain spectrum of fused silica at λp=1 µm
The threshold power: 16/ ≈effeffthR ALPg
αα /)]exp(1[ LLeff −−=2wAeff π=
Rth gwP /)(16 2πα≈ mWPth 500~
![Page 8: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/8.jpg)
Stimulated Light Scattering
SBS and SRSSimilarity:
Inelastic scattering
Frequency shifted down (lower energy)
Grows exponentially
Difference: SBS occurs only in the backward direction whereas SRS can occurs in both directions
Frequency shift about ~ 10 GHz for SBS, ~ 13 THz for SRS
The Brillouin gain spectrum is extremely narrow (bandwidth < 100 MHz) compared with the Raman-gain spectrum (bandwidth > 20 THz)
SBS acoustic phonon, SRS optical phonon
![Page 9: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/9.jpg)
Self-Phase Modulation
Physics origin of nonlinearity:
)/(' 2 effAPnnn +=
is the nonlinear-index coefficient, 2n Wm /106.2~ 220−×
The propagation constant is power dependent:
PAPnk eff γβββ +=+= /' 20
Nonlinear phase shift:
)/(2 2 λπγ effAn=
effin
L
in
L
NL LPdzzPdz γαγββφ =−=−= ∫∫ 00)exp()'(
![Page 10: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/10.jpg)
Self-Phase Modulation
In practice, time dependence of Pinmakes фNL vary with time
SPM leads to frequency chirping of optical pulses
The frequency chirp is proportional to the derivative dPin/dt, and depends on the pulse shape
SPM-induced frequency chirp for Gaussian (dashed curve) and super-Gaussian (solide curve ) pulse
![Page 11: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/11.jpg)
Cross-Phase Modulation
In DWDM systems, the nonlinear phase shift for a specific channel depends not only on the power of that channel but also on the power of other channel, the phase shift for the jth channel:
)2( ∑≠
+=jm
mjeffNLj PPLγφ
jNLj PM )12)(/( −= αγφ
The worst case:
Enlarging Aeff helps reduce the fiber nonlinearity considerably
![Page 12: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/12.jpg)
Four-Wave Mixing
If three optical fields with carrier frequencies ω1, ω2, and ω3copropagate inside the fiber simultaneously, χ(3) generates a fourth field whose frequency ω4, is related to other frequencies:
3214 ωωωω ±±=
The most troublesome case:
3214 ωωωω −+=
)()()()( 2143 ωβωβωβωβ −−+=∆
The phase mismatch when four waves propagate in the same direction:
Modern DWDM systems avoid FWM by using the technique of dispersion management
![Page 13: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/13.jpg)
Birefringence
Birefringence is acquired when the degeneracy between the orthogonally polarized fiber modes is removed
The degree of birefringence is
yx nnB −=
andxn yn are the mode indices for the orthogonally polarized fiber modes
Birefringence leads to a periodic power exchange between the twopolarization components. The period is called beat length:
BLB /λ=
andxn yn are the mode indices for the orthogonally polarized fiber modes
![Page 14: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/14.jpg)
Birefringence
Polarization state is arbitrary in a conventional fiber
Polarization-preserving fiber is produced by intentionally introducing a large amount of birefringence.
Typically, B~10-4
State of polarization in a birefringent fiber over one beat length. Input beam is linearly polarized at 45o with respect to the slow and fast axes
![Page 15: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/15.jpg)
Spot Size
The field distribution is often approximated by a Gaussian function:
)exp()/exp( 22 ziAEx βωρ−=Where,ω is the field radius and is referred to as the spot size
ω/a depends on V parameter; the value for 1.2<V<2.4 can be determined by:
62/3 879.2619.165.0/ −− ++≈ VVaωConfinement factor:
⎟⎟⎠
⎞⎜⎜⎝
⎛−−===Γ
∫∫∞ 2
2
0
20
22exp1ωρρ
ρρ a
dE
dE
PP
x
a
x
total
core
![Page 16: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/16.jpg)
Spot Size
(a) Normalized spot size ω/a as a function of the V parameter obtained by fitting the fundamental fiber mode to a Gaussian distribution; (b) quality of fit for V=2.4
Most telecommunication single-mode fibers are designed to operate in the range 2<V<2.4
![Page 17: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/17.jpg)
Fiber Loss
Power attenuation inside an optical fiber is governed byPdzdP α−=/
Where,α is the field radius and P is the optical powerThe output power is determined
)exp()( LPLP inout α−=Relation between units of dB/km and 1/m
αα 343.4log10)/( 10 =⎟⎟⎠
⎞⎜⎜⎝
⎛−=
in
out
PP
LkmdB
Fiber loss: (1) Material Absorption
(2) Rayleigh Scattering
(3) Waveguide Imperfection
(4) Bending
![Page 18: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/18.jpg)
Fiber Loss
Two main sources:
Material absorption
Rayleigh scattering
Spectral loss profile of a single-mode fiber. Wavelength dependence of fiber loss for several fundamental loss mechanisms is also shown
![Page 19: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/19.jpg)
Material Absorption
Material absorption:
(1) Intrinsic material absorptionThe electronic and vibrational resonances associated with SiO2
(a) Electronic resonance λ < 0.4µm
(b) Vibrational resonance λ > 7µm
(2) Extrinsic material absorptionThe electronic and vibrational resonances associated with impurties
(a) Transition-metal ( Fe, Cu, Co, Ni, Mn, and Cr)
(b) OH ion
(c ) Dopants ( GeO2, P2O5, and B2O3)
![Page 20: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/20.jpg)
Rayleigh Scattering
•Rayleigh scattering is a fundamental loss mechanism arising from local microscopic fluctuations in density
4/λα CR =Where,C is in the range 0.7-0.9(dB/km)-µm4,
•At 1.55µm, αR= 0.12-0.16 dB/km
![Page 21: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/21.jpg)
Waveguide Imperfections
•Mie scattering induced by the imperfections at the core-cladding interface (random core-radius variations)
•In practice, such variation can be kept below 1%, and the resulting scattering loss is typically below 0.03 db/km
![Page 22: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/22.jpg)
Bending Loss
•Bending is another source of scattering loss
• The bending loss is proportional to exp(-R/Rc)
• For single-mode fibers, Rc = 0.2 - 0.4µm typically, and the bending loss is negligible (<0.01 dB/km) for bend radii R > 5 mm
•Macrobending loss are negligible in practice since macroscopic bends exceed R = 5 mm
•Microbending loss could be large in the cable
![Page 23: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/23.jpg)
Optical Fiber Manufacturing
•Fiber Materials
•Design Issues
•Fabrication Methods
•Cables and Connectors
![Page 24: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/24.jpg)
![Page 25: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/25.jpg)
Fiber Materials
Requirements in selecting materials for optical fibers:1. It must be possible to make long, thin, flexible fibers from the material
2. The material must be transparent at a particular optical wavelength
3. Physically compatible materials that have slightly different refractive indices for the core and cladding must be available
Oxide Glass Fibers
Halide Glass Fibers
Active Glass Fibers
Chalcogenide Glass fibers
Plastic Optical Fibers
![Page 26: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/26.jpg)
Glass Fibers
Glass is made by fusing mixtures of metal oxides, sulfides, or selenides
Glass has a randomly connected molecular network
Glasses do not have well-defined melting points
![Page 27: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/27.jpg)
Oxide Glass Fibers
•The most common oxide glass fiber is silica (SiO2)
•Its refractive index is 1.458 @ 850nm
•Its refractive index can be easily modified by adding either fluorine or various oxides
Examples of fiber compositions:(1) GeO2-SiO2 core; SiO2 cladding
(2) P2O5- SiO2 core; SiO2 cladding
(3) SiO2 Core;cladding
(4) Ge2O5- B2O2- SiO2 core, P2O5- SiO2core cladding
Variation in refractive index as function of doping concentration in silica glass
![Page 28: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/28.jpg)
Halide Glass Fibers• The most common halide glass fiber is ZBLAN (ZrF4, BaF4, LaF3, AlF3, NaF)
• A lower-refractive-index cladding (ZHBLAN)is produced by partially replacing ZrF4 by HaF4
• Extremely low transmission losses at mid-infrared wavelengths (0.2-8µm) with the lowest loss being around 2.55 µm
• Potentially offers intrinsic minimum losses of 0.01-0.001dB/km
![Page 29: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/29.jpg)
Active Glass Fibers•Incorporating rare-earth elements (atomic numbers 57-71) into a normally passive glass gives the resulting materials new optical and magnetic properties
•Amplification, attenuation, and phase retardation can be performed in active glass fibers
•Commonly used materials for fiber lasers and amplifiers: Erbium,Neodymium, Ytterbium, Holmium,
![Page 30: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/30.jpg)
Chalcogenide Glass Fibers•Contain at least one chalcogen element (S, Se, or Te) and typically one other element such as P, I, Cl, Br, Cd, Ba, Si, or Tl for tailoring the thermal, mechanical, and optical properties of the glass
•High optical nonlinearity
•Long interaction length
•As2S3 is one of the most well-known materials ( core: As40S58Se2, cladding: As2S3)
•Loss typically range around 1 dB/m
![Page 31: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/31.jpg)
Plastic Optical Fibers•High-bandwidth graded-index polymer optical fibers (POFs) meet the growing demand for delivering high-speed services directly to the workstation
•The core of FOPs are either polymethylmethacrylate (PMMA POF) or perfluorinated polymer (PFP POF)
•Larger optical signal attenuations than glass fibers
•Tough and durable
![Page 32: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/32.jpg)
Design Issues
Several index profiles used in the design of single-mode fibers. Upper and lower rows correspond to standard and dispersion-shifted fibers, respectively
![Page 33: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/33.jpg)
Fiber Fabrication
•Outside Vapor-Phase Oxidation
•Vapor-Phase Axial Deposition
•Modified Chemical Vapor Deposition
•Plasma-Activated Chemical Vapor Deposition
•Double-Crucible Method
![Page 34: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/34.jpg)
Outside Vapor-Phase Oxidation
Basic steps in preparing a preform by the OVPO process. (a) Bait rod rotates and moves back and forth under the burner to produce a uniform deposition of glass soot particles along the rod; (b) profiles can be step or graded index; (c ) following deposition, the soot preform is sintered into a clear glass preform; (d) fiber is drawn from the glass preform
![Page 35: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/35.jpg)
Modified Chemical Vapor Deposition
23223
2224
62342
ClOPOPOClClGeOOGeCl+→+
+→+
Schematic of MCVD
![Page 36: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/36.jpg)
Plasma-Activated Chemical Vapor Deposition
Schematic of PCVD process
![Page 37: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/37.jpg)
Vapor-Phase Axial Deposition
Apparatus for the VAD process
![Page 38: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/38.jpg)
Double-Crucible Method
Double-crucible arrangement for drawing fibers from molten glass
![Page 39: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/39.jpg)
Fiber Drawing
Schematic of a fiber-drawing apparatus
Apparatus used for fiber drawing
![Page 40: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/40.jpg)
Cables and Connectors
Typical designs for light-duty fiber cables
Typical designs for heavy-duty fiber cables
![Page 41: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/41.jpg)
Birefringence
Birefringence is acquired when the degeneracy between the orthogonally polarized fiber modes is removed
The degree of birefringence is
yx nnB −=
andxn yn are the mode indices for the orthogonally polarized fiber modes
Birefringence leads to a periodic power exchange between the twopolarization components. The period is called beat length:
BLB /λ=
andxn yn are the mode indices for the orthogonally polarized fiber modes
![Page 42: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/42.jpg)
Birefringence
Polarization state is arbitrary in a conventional fiber
Polarization-preserving fiber is produced by intentionally introducing a large amount of birefringence.
Typically, B~10-4
State of polarization in a birefringent fiber over one beat length. Input beam is linearly polarized at 45o with respect to the slow and fast axes
![Page 43: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/43.jpg)
Spot Size
The field distribution is often approximated by a Gaussian function:
)exp()/exp( 22 ziAEx βωρ−=Where,ω is the field radius and is referred to as the spot size
ω/a depends on V parameter; the value for 1.2<V<2.4 can be determined by:
62/3 879.2619.165.0/ −− ++≈ VVaωConfinement factor:
⎟⎟⎠
⎞⎜⎜⎝
⎛−−===Γ
∫∫∞ 2
2
0
20
22exp1ωρρ
ρρ a
dE
dE
PP
x
a
x
total
core
![Page 44: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/44.jpg)
Spot Size
(a) Normalized spot size ω/a as a function of the V parameter obtained by fitting the fundamental fiber mode to a Gaussian distribution; (b) quality of fit for V=2.4
Most telecommunication single-mode fibers are designed to operate in the range 2<V<2.4
![Page 45: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/45.jpg)
Fiber Loss
Power attenuation inside an optical fiber is governed byPdzdP α−=/
Where,α is the field radius and P is the optical powerThe output power is determined
)exp()( LPLP inout α−=Relation between units of dB/km and 1/m
αα 343.4log10)/( 10 =⎟⎟⎠
⎞⎜⎜⎝
⎛−=
in
out
PP
LkmdB
Fiber loss: (1) Material Absorption
(2) Rayleigh Scattering
(3) Waveguide Imperfection
(4) Bending
![Page 46: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/46.jpg)
Fiber Loss
Two main sources:
Material absorption
Rayleigh scattering
Spectral loss profile of a single-mode fiber. Wavelength dependence of fiber loss for several fundamental loss mechanisms is also shown
![Page 47: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/47.jpg)
Material Absorption
Material absorption:
(1) Intrinsic material absorptionThe electronic and vibrational resonances associated with SiO2
(a) Electronic resonance λ < 0.4µm
(b) Vibrational resonance λ > 7µm
(2) Extrinsic material absorptionThe electronic and vibrational resonances associated with impurties
(a) Transition-metal ( Fe, Cu, Co, Ni, Mn, and Cr)
(b) OH ion
(c ) Dopants ( GeO2, P2O5, and B2O3)
![Page 48: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/48.jpg)
Rayleigh Scattering
•Rayleigh scattering is a fundamental loss mechanism arising from local microscopic fluctuations in density
4/λα CR =Where,C is in the range 0.7-0.9(dB/km)-µm4,
•At 1.55µm, αR= 0.12-0.16 dB/km
![Page 49: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/49.jpg)
Waveguide Imperfections
•Mie scattering induced by the imperfections at the core-cladding interface (random core-radius variations)
•In practice, such variation can be kept below 1%, and the resulting scattering loss is typically below 0.03 db/km
![Page 50: Nonlinear Optical Effects in Fibersece-research.unm.edu/hayat/ece565/mod2_D.pdf · Nonlinear Optical Effects in Fibers • NLO effects are manifested as attenuation, phase shifts,](https://reader033.vdocuments.mx/reader033/viewer/2022051910/60005f16742fed00f8273da3/html5/thumbnails/50.jpg)
Bending Loss
•Bending is another source of scattering loss
• The bending loss is proportional to exp(-R/Rc)
• For single-mode fibers, Rc = 0.2 - 0.4µm typically, and the bending loss is negligible (<0.01 dB/km) for bend radii R > 5 mm
•Macrobending loss are negligible in practice since macroscopic bends exceed R = 5 mm
•Microbending loss could be large in the cable