nissin chemical industry co.,ltd. vinyblan · vinyl chloride emulsion this is a world-˜rst,...
TRANSCRIPT
Nissin Chemical Industry Co.,Ltd.
VINYBLANVinyl Chloride Emulsion
Vinyl chloride emulsion
This is a world-�rst, ground-breaking emulsion that has been developed using the company’sunique polymerization technology. The product is extensively used and highly rated because it leverages the features of vinyl chloride to provide excellent dispersion of colorant etc., chromogenic properties and �ame resistance.
Features of Vinyblan
Vinyblan is a copolymerized resin consisting of vinyl chloride with acrylic acid ester and vinyl acetate, it has the following features: 1) Water-based emulsion for excellent safety. 2) Chemical stability enables excellent miscibility with all kinds of emulsions, inorganic colorants, plasticizers. 3) Coats of paint are �ame-resistant thanks to self-extinguishing properties. 4) Coats of paint have excellent resistance to plasticizer, alcohol, acid, and alkal. 5) Strong polarity from vinyl chloride resin, and excellent chromogenic properties when printing.
Paintingmaterial/ink applications
All kinds of painting materials/ink binders
Media absorbing layer applicationsInkjet printing absorbing layer/
heat sublimating printing absorbing layer
Textile treatment applicationsFlameproo�ng for
non-woven fabrics and textiles, etc.
1
150 63 58 12
Grade Solid Content%
Viscosity(mPa•s) PH
Averageparticle size
(nm)
Tg(˚C)
MFT(˚C)
Acid Value(KOHmg/g)
Vinyl chloride/acrylic acid ester group emulsion products(Vinyl chloride/acrylic acid ester copolymer)
271
8.5
8.5
7.5
278
690
902
900
43
43
54
50
40
200
200
300
200
230
180
500
330
200
-3
33
46
60
70
0
46
60
80
Min. 80ºC
14
5
6
9
6
B-type viscometer/23˚C X 6rpm
Vinyl chloride/vinyl acetate group emulsion products(Vinyl chloride/vinyl acetate copolymer)
500 7.5
8.5
Vinyl chloride emulsion products(Vinyl chloride copolymer)
7.5700
30
30
50
50
30
30
73
70
46
57
7.5
Vinyl chloride /Polyurethane aqueous solution(Vinyl chloride copolymer)
Min. 80ºC
701
603 50 300 6.0
985 37 300 6.0 70 80 5Min. 80ºC
VINYBLAN grades
Min. 80ºC
2
715S 25 10 7.5 90 25 80ºC
7.5745
30
30
100
50
140
70
55
57
31
50
7.5
Vinyl chloride / Acrylic aqueous solution products(Vinyl chloride copolymer)
Min. 80ºC
737 47ºC
30 300 7.5 100 42 450ºC
747 30 50 7.5 6650 58ºC 35
735
Highly �ame-resistant. Endows all kinds of emulsionswith �ame resistance.
Textile Treatment
The main ingredient of Vinyblan is vinyl chloride, providing excellent �ameresistance. It can be used as a �ame-resistant binder in �ame resistance �nishingof textiles/non-woven fabrics. It can be applied in various methods, including spray, gravure, foaming and dipping.
FeaturesFeatures
900Hard Type, Satisfactory heat resistance (no discoloration)
25.5 70
N
902
690
985
Semi-hard type
Oxygen index number measurement methodTest pieces: Vinyblan 278/690/900/985
Test piece production: Each Vinyblan is poured onto the mold of mold release paper, and items of the right size that have been dried with a desiccator (80˚C - 120˚C) are cut and taken as test pieces. (Test piece size: length 10cm x width thickness 1mm).Combustion test: LOI Standard (conforming to JIS K7201).
Flame resistance (MVSS) measurement methodBacking: 100% polyester woven fabric.Coating volume: 50g or 100g/m2 (dry)Treatment: DippingDrying: 130˚C X 5 minutesFlame resistance: MVSS-302 standard
N
N
N16025.0
6027.5
31.0 N
High solid content. Satisfactory heat resistance (no discoloration)
271
Application GradeOxygen
index number(LOI value)/
TextileNon-woven fabricFireproo�ng
278 Soft type
Noncombustibility(MVSS standard)Coating volume 100g[mm/min]
Features
Non combustibility(MVSS standard)Coating volume
50g[mm/min]
24.5 140 N
Fiber �ameresistance
4
Painting material Painting materials can be endowed with �ame resistance.
Paint/Ink binder applications
Vinyblan can be used as a binder in water-based paint, coating, and ink formulations. It is highly regarded for its adhesion to vinyl chloride substrates, its colorant dispersion due to the strong polarity of vinyl chloride, and its mechanical stability. The 700 series has excellent adhesion to all kinds of substrates due to the polymerization of acrylic aqueous solution as protective colloid.
Media applications
By using Vinyblan surfaces can be endowed with excellent chromogenic properties.
278603701900985
Products within this group have:Very good chromogenic propertiesThermochromic resistance
278
700701
715S735737745747
Gravure inkInkjet inkPaper coating
Small particle sizeProduces a very transparent �lmSuperior water and/or alcohol resistance Excellent colorant dispersionCan be used with varrious alcohols and solvents
Application Grade Features
Screen Printing
603
Suppress the increase in viscosity after mixing the silica, printing surface can be endowed with outstanding chromogenic properties.
Application Grade
Industrial IJ printingabsorbing layer
Heat sublimating printing absorbinglayer
278Transparent �lm formation possible.(100 - 120ºCX10 seconds, thickness 5 microns).
Features
High level of chromogenic properties, Superior water resistance after �lm formation.
701
3
700 278
Features
700 series schematic diagram
1. Excellent water resistance since it does not use emulsi�er.2. Normal temperature deposition is possible by using alcohol as a solvent.3. Minute particle size enables production of �lms that have glossy transparency.4. Excellent dispersion and satisfactory miscibility with organic pigment and all other kinds of addition agents.
Common emulsion 700 series
Emulsi�er molecule
Polymer moleculePolymer molecule
With minus charge With minus charge
Hydrophilic groupLipophilic group
Hydrophilic group
5
700
701
715S
30
30
23
50
50
50
7.5
7.5
7.5
30
30
90
70
73
25 0
57
46
8
B-type viscometer/23°C×6 rpm
Min. 80°C
Min. 80°C
Solid content(%)
Viscosity (mPa•s)
Average particle size (nm)
Acid value (KOHmg/g)Grade PH Tg(℃) MFT(℃)
VINYBLAN 700 series.
The VINYBLAN 700 series is a polymerized vinyl chloride emulsion that hasbeen developed without using any emulsi�er, based on the company's unique technology as a protective colloid for acrylic aqueous solutions, etc.
Acrylic aqueous solution 700 701 715S
×
×
○
○
○
○
○
○
271/278 700 701 715S
All kinds of solvent resistance tests.
Colorant dispersion
Test piece: Glass plate painted with Bar Coater No.6100 °C ×5 minutes drying.Testing: Drip pure water/alcohol/plasticizer on �lm and observe state after 24 hours.
Testing method
No change No change No change No change
Whitening No change No change No change
Swelling No change No change No change
Pure water
Alcohol (methyl alcohol)
Plasticizer (DOP)
Miscibility
Dispersion
E.g., Drip methyl alcohol
Blank After 24 hours
Test piece: Adjusted with carbon black MA100 (manufactured by Mitsubishi Paper Mills, Ltd.) 20g, each Vinyblan 67g, and pure water 13g.Miscibility: We determined whether or not the adjusted test piece and colorant would mix.Stirring conditions: Stirred with dispar at 2000 rotations×30 minutes. ○: Mixed without thickening. △: Mixed but thickened. ×: Did not mix, and aggregate was produced. Dispersion: Successive precipitation was determined by the following criteria. ○: No precipitation. △: Precipitated, but with repeated stirring possible.
6
Acrylic aqueous solution
Acrylic aqueous solution
715S 715S
Acrylic aqueous solution
32~32~312~32~322122~32212
Methanol / Isopropanol
Diethylene glycol / Triethylene glycol
Diethylene glycol mono n-butyl ether(IPA併用)2-pyrrolidone / N-methyl pyrrolidone
Triethylene glycol mono-n-butyl ether
1,5 Pentane diol
MEK
MIBK
3
3
2~ 1(3)3
3
3
3
2
3
3
2~ 1(3)3
3
3
2
1
3
3
2~ 1(3)3
3
3
2
1
700
333233322~3333223
701
3332~33332~333332~32~33
715S
333333333333333
700 701 715S
3:Mixture possible 2:Viscosity increasing 1:Gelation
3:No change 2:Partially peeling or Slightly Whitening 1:Peeling or Whitening
Adhesion to the various substrates
Testing method
Solvent miscibility.
Gluing properties
Abrasion resistance
Water resistant friction property
Alcohol resistance
Water resistance
Gluing properties
Abrasion resistance
Water resistant friction property
Alcohol resistance
Water resistance
Gluing properties
Abrasion resistance
Water resistant friction property
Alcohol resistance
Water resistance
Solvent
Mixture: Sample: VINYBLAN: IPA: Diethylene glycol n Butyl ether : Water=20:15:15:50 Paint: Painted with Bar Coater No.6 on each substrate Dried: 60°C ×1min
Gluing properties: Tape peeling test Abrasion resistance: Rubbing test was carried out using gauze (load 200g, repeated 30 times).Water resistant friction property: Rubbing test was carried out using gauze dipped in water (load 200g, repeated
30 times).Alcohol resistance: Rubbing test was carried out using gauze dipped in IPA (load 200g, repeated 30 times).Water resistance: The painted substrate is immersed in water at normal temperatures and allowed to soak for
one hour, then conditions are observed.
PET
PVC
Aluminum
Mixing ratio:VINYBLAN,water and solvent in the propotion 7:5:2.
7
VINYBLAN 700 series.
271278603690900902985
3
3
3
3
3
3
2
2
1
1
2
1
3
3
3
3
3
3
2
2
1
TPG/PG TPM CS-12 DPNB/TPNB DPNB:TPM=1:1
700:DPNB=1:1※
150001400013000120001100010000
900080007000600050004000300020001000
00 10 20 30 40 50 60 70
271
278
603
690
900
700
701
902
715S
690(TPM)278(TPM)690(CS-12)278(CS-12)
MFT (℃)
0 5 10 15
70
60
50
40
30
20
10
0
-10
Tripylene glycol/Propylene glycol 2,2,4-Trimethyl-1,3-pentanediol monoisobutyrate (TEXANOL)
Tripropylene glycol methyl ether Dipropylene glycol n- butyl ether Tripropylene glycol n- butyl ether
Water-soluble high-boiling solvent can be mixed.Even high-boiling solvent that is not water-soluble can be mixed if it is mixed in advance with water-soluble high-boiling solvent or Vinyblan 700.
Miscibility with the high-boiling solvent and VINYBLAN.
Testing method
3: Mixture possible 2: Mixture possible by strong stirring 1: Gelation
All kinds of phthalate plasticizers
Thickening curve for each grade.
Additional example
Amount of UH-450VF added[g/1000gEm]
Visc
osity
(m
P a ・
s)
Ratio of deposition agent mixture (%)
Change to MFT by means of ratio of deposition agent mixture
Example of VINYBLAN adjustment.
1. Adjustment of viscosity.
2. Example of adjustment of MFT (Minimum Film Temperature).
Thickener: Adekanol UH-450VF (manufactured by ADEKA, Inc.)Gluing properties: All kinds of emulsions are added, and
measurements are taken at 23°C/6rpm (BM-type viscometer).
8
Shin-Etsu MicroSI 1.888.642.7674www.microsi.com
Nissin Chemical Industry Co., Ltd.+81.3.3295.3931www.nissin-chemical.co.jp
CautionPlease retain the information on the product safety data sheet and technicalinformation.Please limit the use of this product toindustrial uses.Data from this catalog are notspecification values. To determine ifthis matches your purpose of use,please carry out your own companytesting in advance.Furthermore, introduction of useapplications contained herein is not aguarantee against patent infringement.Changes in descriptions in this catalog,improvements in performance, andchanges in specifications may occurwithout proir notification.Prior to reproducing any of this material please contact us.
Please contact
Nissin Chemical Industry CO., Ltd.
Jan. 2018