ngi_brochw
TRANSCRIPT
-
8/8/2019 NGi_BrochW
1/3
NGi SeriesGeneral Specifications Brochure
Page 1 of 3
34MOUNTPLEASANTROADASTONPA19014USA voice: 610-500-2000 fax:610-500-2002 email:[email protected] web:www.riekerinc.com
Thei
nformationa
ndm
aterialpresentedm
ayn
otbe
published,
broadcast,r
ewritten,orredistributedw
ithoutthee
xpressedw
rittenc
onsentofRiekerIn
c.
Thec
ontentpresentedi
sp
rovidedf
orinformational
purposeso
nlya
nds
ubjecttoc
hange.
2002-2007R
iekerInc.
AllR
ightsR
eserved.
FORMN
UMBER:S
K0009_
07/02U
PDATED:0
1/07
Accurate Electronic Inclinometer
with an Integrated SignalAmplifier for a 2-Wire Analog
420mA Output in Ranges
of 10, 30 and 80
Description
The NGi Series of inclinometers - NG2i (10), NG3i(30), and NG4i (80) - are liquid capacitive gravitybased sensors with integrated sensor and excitationelectronics. The thermal drift of the primary sensor isfurther compensated by an electronic equalization of thetemperature.
An integrated highly stable voltage regulator makes itpossible to supply the inclinometer from any unregulatedsupply or battery as low as +8V and up to +30VDC. Themeasuring principle assures a linear angle output with420mAs calibrated to equal the measuring range of thesensor. The measuring time constant can be ordered withlonger rise times as an option. The power is obtainedfrom the measurement current loop, thereby eliminatingthe need for a separate power supply and enablingoperation with a two wire connection.
Applications
The NGi Series with its current loop output is well suitedfor industrial use where high accuracy and long-termstability are required in a noisy environment where hightemperature changes occur and non-stable supply voltagesare present.
For additional functionality the SB1i and SB2iInclinometer Sensor Packages have both zero and gain
adjustments. For dual axis applications refer to the SB2i.The SB2i is also available with CSA Certification forIntrinsic Safety.
Typically used in building and bridge construction, mining,radar alignment systems, pitch and roll,agricultural/construction equipment, and processmachinery.
Features
Temperature compensated420mA output
Non regulated +8+30 V powersupply
Integrated sensor electronicswith 420mA excitation
Linear output characteristics
2 wire connection sensor powerobtained from the current loop
High measurement accuracy
Very low relative linearity errors
High long-term stability
EMC protected
Vibration and shock insensitivedue to non mechanical internalparts
Hermetically sealed housing toIP67
Sensor galvanically isolated fromhousing
Sensor zero mechanicallyadjusted with mounting ring
Current loop limitation
Hysteresis free measuring signal
-
8/8/2019 NGi_BrochW
2/3
NGi SeriesGeneral Specifications Brochure
Page 2 of 3
34MOUNTPLEASANTROADASTONPA19014USA voice: 610-500-2000 fax:610-500-2002 email:[email protected] web:www.riekerinc.com
Thei
nformationa
ndm
aterialpresentedm
ayn
otbe
published,
broadcast,r
ewritten,orredistributedw
ithoutthee
xpressedw
rittenc
onsentofRiekerIn
c.
Thec
ontentpresentedi
sp
rovidedf
orinformationalpurposeso
nlya
nds
ubjecttoc
hange.
2002-2007R
iekerInc.
AllR
ightsR
eserved.
FORMN
UMBER:S
K0009_
07/02U
PDATED:01
/07
NGiModelSpecifications NG2i NG3i NG4iMEASURING RANGE 10 30 80RESOLUTION
-
8/8/2019 NGi_BrochW
3/3
NGi SeriesGeneral Specifications Brochure
Page 3 of 3
34MOUNTPLEASANTROADASTONPA19014USA voice: 610-500-2000 fax:610-500-2002 email:[email protected] web:www.riekerinc.com
Thei
nformationa
ndm
aterialpresentedm
ayn
otbe
published,
broadcast,r
ewritten,orredistributedw
ithoutthee
xpressedw
rittenc
onsentofRiekerIn
c.
Thec
ontentpresentedi
sp
rovidedf
orinformationalpurposeso
nlya
nds
ubjecttoc
hange.
2002-2007R
iekerInc.
AllR
ightsR
eserved.
FORMN
UMBER:S
K0009_
07/02U
PDATED:01
/07
Figure 2: Wiring Connections
Figure 3: Dimensions and Mounting Position (inches [mm])