new iso brochure for pdf
TRANSCRIPT
1
APEXPUMPS
TECHNICAL SELECTION GUIDE
ISFC close coupled pumps ISF Long coupled pumps
Conforming to ISO 2858 and ISO 5199 standard
Heavy duty pumps for process, refinery, chemical and industrial applications
2
Applications
• Chemical, refinery and process
• Building services
• Industrial cooling, heating and circulation
• Municipal water boosting and transfer
• Cooling water supply
• General industrial services Operating pressure Cast iron pumps are capable of a working pressure of 16 bar With higher rated flanges, cast steel and stainless steel can be supplied for working pressures of 25 All pumps are hydrostatically tested upon assembly to 1.5 times the rated working pressure. Mechanical seal Virtually any make and type of single, double or cartridge seal may be fitted to the ISFC pump.
Drivers Pumps are generally supplied complete with a 3 phase electric motor. Motors with increased safety are also frequently specified. Materials Apex carry stocks of finished components in cast iron and stainless steel. Many other materials can be cast to order including: • Duplex stainless steel • Super duplex stainless steel • Cast bronze • Cast steel • Titanium • Hastalloy Further information For further information on any APEX product, please contact the APEX sales office:
⇒ Tel: 0117 907 7555 ⇒ Fax: 0117 907 7556 ⇒ Email: [email protected]
Features • Single stage impeller • Back pull out design • Conforms to ISO 2858 dimensions • Single mechanical seal • High efficiency hydraulic design • Stable head-flow curves for parallel
operation Benefits • Rotating element may be removed
from the pump without disturbing the pipework.
• Low Nett Positive Suction Head protects the pump from cavitation damage.
• Non-overloading power characteristics.
Operating range • Discharge flange sizes 32 to 200
mm • Maximum flowrate 250 l/sec • Max generated head 160 m at 2900 rpm • Max temperature 150 deg C
APEXPUMPS CENTRIFUGAL PUMP MANUFACTURERS
APEX ISFC Horizontal end-suction pumps to ISO 2858 dimensions
APEXPUMPS
3
APEXPUMPS CENTRIFUGAL PUMP MANUFACTURERS
APEX ISF Horizontal end-suction pumps to ISO 2858 and ISO 5199 standard
Features • Single stage impeller • Back pull out design • Conforms to ISO 2858 dimensions • Single mechanical seal • High efficiency hydraulic design • Stable head-flow curves for
parallel operation Benefits • Shaft, bearing and seal design to
full requirements of ISO 5199. • Rotating element may be
removed from the pump without disturbing the pipework.
• Low Nett Positive Suction Head protects the pump from cavitation damage.
• Non-overloading power characteristics.
Operating range • Discharge flange sizes 32 to 200 mm • Maximum flowrate 250 l/sec • Max generated head 160 m at 2900 rpm
Applications
• Chemical, refinery and process
• Building services
• Industrial cooling, heating and circulation
• Municipal water boosting and transfer
• Cooling water supply
• General industrial services Operating pressure Cast iron pumps are capable of a working pressure of 16 bar With higher rated flanges, cast steel and stainless steel pumps can be supplied for working pressures up to 25 bar. All pumps are hydrostatically tested upon assembly to 1.5 times the rated working pressure. Mechanical seal Virtually any make and type of single, double or cartridge seal may be fitted to the ISF pump.
Drivers Pumps are generally supplied complete with a 3 phase electric motor. Motors with increased safety are also frequently specified. Materials Apex carry stocks of finished components in cast iron and stainless steel. Many other materials can be cast to order including: • Duplex stainless steel • Super duplex stainless steel • Cast bronze • Cast steel • Titanium • Hastalloy Further information For further information on any APEX product, please contact the APEX sales office:
⇒ Tel: 0117 907 7555 ⇒ Fax: 0117 907 7556 Email: [email protected]
APEXPUMPS
4
APEXPUMPS
Quality Control….
Every pump produced by Apex is manufactured strictly to ISO 9001 quality control procedures, and complies with the most rigorous documentary re-quirements of demanding customers.
….Benefit
The in-house engineering capability, attention to quality control and testing facilities make Apex the preferred choice for many high specification projects.
More Sizes….
New sizes are continually being added to the range, and with the ISF range incorporating discharge sizes of up to 200mm and motors of up to 200kW, the ISF range delivers a comprehensive choice to the cus-tomer.
Higher Pressures….
Pumps required to operate in tall buildings, and in certain industrial processes, need to operate at high working pressures. For these applications, Apex Pumps offer the ISF range of close-coupled pumps in cast steel, with flanges to BS4504 PN16
….Benefit
The ISF pump in cast steel provides a cost-effective solution to what would otherwise be a specialist pump application. Many component parts will be shared with other ISF pumps, providing spares inter-changeability throughout the site.
Specialist Materials….
Apex carry large stocks of cast stainless steel pump components, and operate a fast-track manufacture of specialist materials such as Duplex stainless steel and Hastalloy, backed by full materials certification and traceability.
….Benefit
Industrial applications are increasingly specifying stainless steel pump materials in recognition of the environmental and economic benefits. Apex Pumps’ investment in stainless steel stock parts, provides users with a standard to the highest specifications.
….Benefit
Quick delivery is appreciated by users and pump distributors alike, and makes Apex Pumps the first choice of replacement of existing pumps of other makes.
Larger Stock….
Our policy of stocking large quantities of finished machined components, ready for immediate assem-bly, enables us to provide a fast delivery of complete pumps and spare parts, and has earned the com-pany its good reputation for reliable delivery.
Wide Choice of Options….
Virtually any mechanical seal, or cartridge seal, with flush, quench or independent circulation system is possible with the ISF pump range. Modular construc-tion enables the pump to be engineered using stan-dard stock components wherever possible, and our in-house CNC machining facilities can quickly pro-duce any special parts against tight deadlines.
Competitive Prices….
As a specialist manufacturer of centrifugal pumps, all Apex products are designed to be highly competitive without compromise to quality and good engineering practice.
….Benefit
Apex fully support its pump distributor network and customers by providing cost-effective solutions to pumping problems.
….Benefit
Pumps users benefit by the broad engineering ex-perience at Apex, and our familiarity with difficult ap-plications and demanding duties.
….Benefit
Greater choice results in better hydraulic selection, optimised operating efficiency and lower power con-sumption. With 29 pump sizes to the apex ISF range, a cost-effective and properly engineered solu-tion can be provided for most industrial pumping ap-plications.
New features of the ISF pump range
5
APEXPUMPS
4 pole 1450 rpm
ME
TRE
S
6
1 1.2
10
12
8
20
15
120
50
30
40
60
70
80
100
25
20
1.5
5 6 87
2 2.5
10
3
12 15
4 5 12
3025
6 7 8 10
40 50 60
15
70
20
80 400200
30
100 120 150
40 50 8060
250
70
300
100 250
M3/HR
L/SEC
600500
120 150 200
800
300
10004
50x32-160
50x32-20065x40-200
65x40-250
65x40-315
80x65-160
80x50-200
80x50-250
25
80x50-315
100x65-200
100x65-250
100x65-315
125x100-200
125x100-250
125x100-315
125x80-400 125x100-400
150x125-250
150x125-315
150x125-400200x150-400
250x200-315
250x200-400
125x100-500200x150-500
15
504
8
1
10
12
15
25
20
30
40
50
60
70
4
15
21.51.2
5 6 7
32.5
108 12
765
20 25
108 12
30 40
80
100
120
200L/SEC
200100
20 25
7060 80
504030
120 150
1007060 80
250 300
150120
500400 600
300250
1000M3/HR
800
150
200
50x32-160
50x32-200 65x40-200
65x40-250
80x65-160
80x50-200
80x50-250
100x65-200
100x65-250
125x100-200
125x100-250
65x40-315 80x50-315 100x65-315 125x100-315
2 pole 2900 rpm
ME
TRE
SISF range charts 50hz
6
Typical cross section: Bareshaft ISF pumps
Ref Item Build code C Build code B Build code D Build code G Build code M Build code 61 Volute casing Cast iron Cast iron Ductile iron Cast iron Cast iron 316 SS2 Impeller Cast iron LG4 Bronze LG4 Bronze Cast iron 316 SS 316 SS3 Shaft 420 SS 420 SS 420 SS 420 SS 420 SS 316 SS4 Backcover Cast iron Cast iron Cast iron Cast iron Cast iron 316 SS6 Bearing housing Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron7 Mechanical Seal As specified As specified As specified As specified As specified As specified8 Impeller nut Steel LG4 Bronze LG4 Bronze Steel 316 SS 316 SS8.1 Impeller nut washer Steel Bronze Bronze Steel 316 SS 316 SS11 Support foot Steel Steel Steel Steel Steel Steel12.1 Casing wear ring Cast iron Cast iron Cast iron LG4 Bronze Cast iron 316 SS12.2 Backcover wear ring Cast iron Cast iron Cast iron LG4 Bronze Cast iron 316 SS13.1 Impeller key Key steel Key steel Key steel Key steel 316 SS 316 SS13.2 Coupling key Key steel Key steel Key steel Key steel Key steel Key steel41.1 Inboard Roller bearing Steel Steel Steel Steel Steel Steel41.2 Double angular contact brg Steel Steel Steel Steel Steel Steel42 Bearing cover Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron45 Locknut Steel Steel Steel Steel Steel Steel45.1 Lockwasher Steel Steel Steel Steel Steel Steel46.1 Inboard Lipseal Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber46.2 Outboard lipseal Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber48 Flinger Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber49 Grease nipple Steel Steel Steel Steel Steel Steel61.1 Casing o-ring Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber61.2 End cover o-ring Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubberF1 Casing bolts Steel Steel Steel Steel Steel SteelF2 End cover bolts Steel Steel Steel Steel Steel SteelF3 Support foot bolts Steel Steel Steel Steel Steel SteelP1 Casing vent plug Steel Steel Steel Steel Steel 316 SSP2 Suction gauge plug Steel Steel Steel Steel Steel 316 SSP3 Casing drain plug Steel Steel Steel Steel Steel 316 SS
F1
01
12.2
02
12.1
13.1
P2
08.1
P3
07 42 41.1 06 03 50 41.2 45.1 13.2
49 46.1 11 F3 46.2
08
P1
04
45
F2
48 61.261.1
APEXPUMPS
7
Typical cross section: Close-coupled ISF pumps
Ref Item Build code C Build code B Build code D Build code G Build code M Build code 61 Volute casing Cast iron Cast iron Ductile iron Cast iron Cast iron 316 SS2 Impeller Cast iron LG4 Bronze LG4 Bronze Cast iron 316 SS 316 SS3 Stub Shaft 420 SS 420 SS 420 SS 420 SS 420 SS 316 SS4 Backcover Cast iron Cast iron Cast iron Cast iron Cast iron 316 SS5 Flange adapter Cast iron Cast iron Cast iron Cast iron Cast iron 316 SS7 Mechanical Seal As specified As specified As specified As specified As specified As specified8 Impeller nut Steel LG4 Bronze LG4 Bronze Steel 316 SS 316 SS8.1 Impeller nut washer Steel Bronze Bronze Steel 316 SS 316 SS12.1 Casing wear ring Cast iron Cast iron Cast iron LG4 Bronze Cast iron 316 SS12.2 Backcover wear ring Cast iron Cast iron Cast iron LG4 Bronze Cast iron 316 SS13.1 Impeller key Key steel Key steel Key steel Key steel 316 SS 316 SS33 Motor sleeve Steel Steel Steel Steel Steel Steel42 Bearing cover Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron61 Casing o-ring Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubberF1 Casing bolts Steel Steel Steel Steel Steel SteelF2 Motor flange bolts Steel Steel Steel Steel Steel SteelF3 Stub shaft socket set screws Steel Steel Steel Steel Steel 316 SSF4 Motor sleeve set screws Steel Steel Steel Steel Steel SteelF5 Motor foot bolts Steel Steel Steel Steel Steel SteelP1 Casing vent plug Steel Steel Steel Steel Steel 316 SSP2 Suction gauge plug Steel Steel Steel Steel Steel 316 SSP3 Casing drain plug Steel Steel Steel Steel Steel 316 SS
01
12.2
02
12.1
P2
08.1
P3
07
08
P1
04 03 05
10.1
13
1833F3
F2
F4F1 F5
APEXPUMPS
8
Impeller and bearing housing data
Pump Shaft Shaft diameters Bearing type Impeller data
size group Seal Bearings Coupling Inboard Outboard No of Eye dia Width Max M of I
A B C vanes mm W solids mm Kgm2
50x32-160 1 32 35 24 N307E 7307B 6 60 7 3 0.011
50x32-200 1 32 35 24 N307E 7307B 5 60 5 2 0.025
65x50-160 1 32 35 24 N307E 7307B 6 80 8.5 4 0.013
65x40-200 1 32 35 24 N307E 7307B 6 70 8.5 4 0.022
65x40-250 2 43 45 32 N309E 7309B 5 85 7 0 0.067
65x40-315 2 43 45 32 N309E 7309B 5 75 6 2.5 0.124
80x65-160 1 32 35 24 N307E 7307B 5 90 16.5 8 0.014
80x50-200 1 32 35 24 N307E 7307B 6 90 11 5 0.02
80x50-250 2 43 45 32 N309E 7309B 6 85 9 4 0.056
80x50-315 2 43 45 32 N309E 7309B 5 90 7 3 0.189
100x80-160 2 43 45 32 N309E 7309B 6 115 24 11.5 0
100x65-200 2 43 45 32 N309E 7309B 6 110 17.5 8.5 0.037
100x65-250 2 43 45 32 N309E 7309B 6 110 11.5 5.5 0.078
100x65-315 3 53 55 42 N311E 7311B 6 125 12.5 6 0.145
125x80-400 3 53 55 42 N311E 7311B 5 155 10 0 0
125x100-200 2 53 45 32 N309E 7309B 6 130 29 14 0.039
125x100-250 3 53 55 42 N311E 7311B 6 140 23 11 0.1
125x100-315 3 53 55 42 N311E 7311B 6 135 16.5 8 0.202
125x100-400 3 53 55 42 N311E 7311B 5 140 17 8 0.404
125x100-500 4 60 65 48 N313E 7313B 5 140 14 0 1.325
150x125-250 3 53 55 42 N311E 7311B 6 155 40 0 0.113
150x125-315 3 53 55 42 N311E 7311B 6 155 18 0 0.215
150x125-400 3 53 55 42 N311E 7311B 6 170 22 10.5 0.528
150x125-500 4 60 65 48 N313E 7313B 5 165 23 11 1.35
200x150-315 4 60 65 48 N313E 7313B 5 195 55 0 0.268
200x150-400 4 60 65 48 N313E 7313B 6 195 45 0 0.611
200x150-500 4 60 65 48 N313E 7313B 6 195 30 0 1.357
250x200-315 4 60 65 48 N313E 7313B 6 220 0 0.322
250x200-400 4 60 65 48 N313E 7313B 5 220 65 0 0
A B
Eye
Dia
met
er
C
Inboard bearing Outboard bearing
W
APEXPUMPS
9
L
F
G
GD
D Ø
KShaft group
L K F GD G D
1 50 42 8 7 20 24
2 80 65 10 8 27 32
3 110 85 12 8 37 42
4 110 85 14 9 42.5 48
D OD B Df F N S PCD
32 140 18 78 2 4 18 100
40 150 18 88 3 4 18 110
50 165 20 102 3 4 18 125
65 185 20 122 3 4 18 145
80 200 22 138 3 8 18 160
100 220 24 158 3 8 18 180
125 250 26 188 3 8 18 210
150 285 26 212 3 8 22 240
200 340 29 268 3 12 22 295
250 405 29 320 3 12 26 355
300 460 29 378 4 12 26 410
Shaft dimensions
Flange dimensions
D Df ODPCD
B F N HOLES S DIA
BS4504 PN16 (DIN 2533 PN16, ISO 2084 PN16)
ANSI Class 150RF (BS1560)
D OD B Df F N S PCD
32 (1 1/4") 117 13 64 2 4 16 89
40 (1 1/2") 127 14 73 2 4 16 98
50 (2") 152 16 92 2 4 19 121
65 (2 1/2") 178 17 105 2 4 19 140
80 (3") 191 19 127 2 4 19 152
100 (4") 229 24 157 2 8 19 191
125 (5") 254 24 186 2 8 22 216
150 (6") 279 25 216 2 8 22 241
200 (8") 343 29 270 2 8 22 298
250 (10”) 406 30 324 2 12 25 362
300 (12”) 483 32 381 2 12 25 432
APEXPUMPS
10
Bedplate selection and size
H0
B1
B3
B2
L2
A
L1
L24 HOLES d DIA
TO S
UIT
PU
MP
TO S
UIT
MO
TOR
Bedplate H0 A L1 L2 B1 B2 B3 d Mass ref kg 2a 75 60 800 130 260 360 320 18 25 3a 75 60 900 150 290 390 350 18 27 3b 75 75 900 150 290 390 350 18 36 4a 75 60 1000 170 350 450 400 22 32 4b 75 75 1000 170 350 450 400 22 42 5a 100 60 1120 190 360 490 440 22 49 5b 100 75 1120 190 360 490 440 22 60 6b 100 75 1250 205 410 540 490 22 67 6c 100 90 1250 205 410 540 490 22 78 7b 100 75 1400 230 480 610 550 25 76 7c 100 90 1400 230 480 610 550 25 89 7d 100 110 1400 230 480 610 550 25 101 8c 152 90 1600 270 508 660 600 25 122 8d 152 110 1600 270 508 660 600 25 134 9c 152 90 1800 300 578 730 670 25 137 9d 152 110 1800 300 578 730 670 25 152
10e 152 140 1900 315 698 850 780 28 156 11e 203 140 2000 330 772 950 870 28 207 12f 203 175 2350 380 772 950 870 28 228 13f 203 190 2600 430 772 950 870 28 242
B1B3B2
L2 L2
TO S
UIT
MO
TOR
TO S
UIT
PU
MP
A
L1
4 HOLES d DIA
H0
Fabricated Bedplate Design Fabricated from rolled steel sec-tions, intended to be grouted into position on a suitable concrete plinth. Available for all pump sizes or to customer’s specification.
Folded Bedplate Design Fabricated from mild steel sheet, with welded end-plates incorpo-rating lifting eyes. Folded bed-plates can be secured without the need for grouting. Available for motors up to D180 (22kW output) or to customer’s specification.
APEXPUMPS
11
Bedplate selection and size
PUMP 2-POLE MOTOR SIZE SIZE 90 100 112 132 160M 160L 180 200 225 250 280 315
50x32-160 3a 3a 3a 4a 50x32-200 3b 4a 5a 65x50-160 3b 4a 5a 65x40-200 4a 5a 5a 6c 65x40-250 6b 6b 6b 7b 65x40-315 7b 7b 7b 8d 80x65-160 4a 5a 5a 80x50-200 5a 5a 5a 6b 80x50-250 7b 7b 7b 7b 8d 80x50-315 7b 7b 8c 9d 100x80-160 5a 6b 6b 6b 7b 100x65-200 6b 6b 7b 7b 100x65-250 7b 7b 8c 9c 100x65-315 8c 9c 9c 125x100-200 7b 7b 8c 9c 125x100-250 7b 8d 9d 9d 125x100-315 9d 9d
PUMP 4-POLE MOTOR SIZE SIZE
80 90S 90L 100 112 132 160M 160L 180 200 225 50x32-160 2a 2a 50x32-200 2a 2a 2a 65x50-160 2a 2a 3a 65x40-200 3a 3a 3a 3a 65x40-250 4b 4b 4b 5b 65x40-315 5b 5b 5b 80x65-160 3a 3a 3a 3b 80x50-200 3a 3a 3a 4b 80x50-250 4b 4b 5b 6b 80x50-315 5b 5b 6b 100x80-160 4b 4b 4b 4b 5b 100x65-200 5b 5b 5b 6c 100x65-250 5b 5b 6c 6c 100x65-315 5b 6c 7d 7d 125x80-400 7c 7d 7d 8d
PUMP 4-POLE MOTOR SIZE
SIZE 112 132 160M 160L 180 200 225 250 280S 315S 315B 125x100-200 5b 5b 6c 6c 125x100-250 5b 6c 7c 7c 125x100-315 6c 7d 7d 7d
125x100-400 8c 8c 8d 8d 9d 125x100-500 9d 10e 11e 150x125-250 7c 7c 7d 7d
150x125-315 8d 8d 8d 8d 8d 150x125-400 8d 9c 9c
150x125-500 8d 8d 9d 10e 11e 200x150-315 8d 8d 9d 10e
200x150-400 9d 10e 11e 200x150-500 10e 11e 250x200-315 8d 9d 10e 11e 250x200-400 10e 11e 12f
APEXPUMPS
12
50 32 16 bar ISF50x32-160
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2920
182
164
146
173
155
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
0 1 2 3 4 5 6 7 8 9 10 11Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
182
164
146
64
4652
56
61
61
56
173
155
59
59
62
62
57Qmin
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
0 1 2 3 4 5 6 7 8 9 10 11
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
2
3
4
5
6
7
0 1 2 3 4 5 6 7 8 9 10 11
N.P
.S.H
Met
res
APEXPUMPS
13
50 32 16 bar ISF50x32-200
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2930
228
206
184
217
195
2
3
4
5
6
7
8
9
10
0 1 2 3 4 5 6 7 8 9 10
Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
228
206
184
55
40 4549
53
53
47
217
195
52
52
54
54
50
Qmin
30
35
40
45
50
55
60
65
70
75
0 1 2 3 4 5 6 7 8 9 10
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0 1 2 3 4 5 6 7 8 9 10
N.P
.S.H
Met
res
APEXPUMPS
14
65 40 16 bar ISF65x40-200
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940
228
206
184
217
195
2
4
6
8
10
12
14
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
228
206
184
68
50 56 6066
66
217
195
63
63
67
67
60
Qmin
35
40
45
50
55
60
65
70
75
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
N.P
.S.H
Met
res
APEXPUMPS
15
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
296065 40 16 bar ISF65x40-250
278
250
222
264
236
6
8
10
12
14
16
18
20
22
24
26
28
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
278
250
222
58
42 48 5256
56
51
264
236
55
55
57
57
53
Qmin
50
55
60
65
70
75
80
85
90
95
100
105
110
115
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
0
2
4
6
8
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
N.P
.S.H
Met
res
APEXPUMPS
16
65 40 16 bar ISF65x40-315
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2960
10
15
20
25
30
35
40
45
50
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
342
308
274
50
35 4145
48
48
325
291
47
47
49
49
47Qmin
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
N.P
.S.H
Met
res
APEXPUMPS
17
65 50 16 bar ISF65x50-160
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2920
182
164
146
173
155
1
2
3
4
5
6
7
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
182
164
146
72
49 55 6067
67
59
173
155
64
64
70
70
61Qmin
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
N.P
.S.H
Met
res
APEXPUMPS
18
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
295080 50 16 bar ISF 80x50-200
228
206
184
217
195
2
4
6
8
10
12
14
16
18
20
22
24
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
228
206
184
75
56 63 68
73
73
64
217
195
71
7174
74
68
Qmin
25
30
35
40
45
50
55
60
65
70
75
80
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
0
1
2
3
4
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
N.P
.S.H
Met
res
APEXPUMPS
19
80 50 16 bar ISF80x50-250
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2960
278
250
222
264
236
5
10
15
20
25
30
35
40
45
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
278
250
222
71
58 6366
69
69
264
236
68
70
70
67Qmin
55
60
65
70
75
80
85
90
95
100
105
110
115
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
0
2
4
6
8
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36
N.P
.S.H
Met
res
APEXPUMPS
20
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
296080 50 16 bar ISF80x50-315
342
308
274
325
291
10
15
20
25
30
35
40
45
50
55
60
65
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
342
308
274
61
5055
5859
59
325
291
60
60
58
Qmin
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
N.P
.S.H
Met
res
APEXPUMPS
21
80 65 16 bar ISF80x65-160
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940
182
164
146
173
155
2
3
4
5
6
7
8
9
10
11
12
13
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
182
164
146
80
6168
73
77
77
71
173
155
76
76
79
79
73
Qmin
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
N.P
.S.H
Met
res
APEXPUMPS
22
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2960100 65 16 bar ISF100x65-200
228
206
184
217
195
5
10
15
20
25
30
35
40
0 10 20 30 40 50 60
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
228
206
184
80
61 6873
78
78
73
217
195
76
76
79
79
75
Qmin
30
35
40
45
50
55
60
65
70
75
0 10 20 30 40 50 60
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0 10 20 30 40 50 60
N.P
.S.H
Met
res
APEXPUMPS
23
100 65 16 bar ISF100x65-250
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2960
278
250
222
264
236
10
15
20
25
30
35
40
45
50
55
60
65
70
0 10 20 30 40 50 60 70Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
278
250
222
77
59 6570
75
75
264
236
73
73
76
76
71
Qmin
50
55
60
65
70
75
80
85
90
95
100
105
110
115
0 10 20 30 40 50 60 70
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
2
3
4
5
6
0 10 20 30 40 50 60 70
N.P
.S.H
Met
res
APEXPUMPS
24
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2970100 65 16 bar ISF100x65-315
342
308
274
325
291
10
20
30
40
50
60
70
80
90
100
110
0 10 20 30 40 50 60Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
342
308
274
68
52 57 60
65
65
325
291
63
63
67
67
61
Qmin
70
80
90
100
110
120
130
140
150
160
170
180
0 10 20 30 40 50 60
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0 10 20 30 40 50 60
N.P
.S.H
Met
res
APEXPUMPS
25
100 80 16 bar ISF100x80-160
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2950
182
164
146
173
155
2
4
6
8
10
12
14
16
18
20
0 5 10 15 20 25 30 35 40 45 50
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
182
164
146
81
63 68 71
77
77
71
173
155
74
74
79
79
Qmin
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
0 5 10 15 20 25 30 35 40 45 50
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0 5 10 15 20 25 30 35 40 45 50
N.P
.S.H
Met
res
APEXPUMPS
26
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2960125 100 16 bar ISF125x100-200
228
206
184
217
195
10
20
30
40
50
60
0 10 20 30 40 50 60 70 80 90 100 110 120
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
228
206
184
85
65 7277
82
82
74
217
195
80
80
84
84
77
Qmin
25
30
35
40
45
50
55
60
65
70
75
0 10 20 30 40 50 60 70 80 90 100 110 120
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
3
4
5
6
7
0 10 20 30 40 50 60 70 80 90 100 110 120
N.P
.S.H
Met
res
APEXPUMPS
27
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2970125 100 16 bar ISF125x100-250
278
250
222
264
236
10
20
30
40
50
60
70
80
90
100
110
0 10 20 30 40 50 60 70 80 90 100 110
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
278
250
222
84
66 72 7681
81
264
236
79
83
83
75
Qmin
50
55
60
65
70
75
80
85
90
95
100
105
110
115
0 10 20 30 40 50 60 70 80 90 100 110
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
2
3
4
5
0 10 20 30 40 50 60 70 80 90 100 110
N.P
.S.H
Met
res
APEXPUMPS
28
125 100 16 bar ISF125x100-315
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2970
342
308
274
325
291
20
40
60
80
100
120
140
160
180
0 10 20 30 40 50 60 70 80 90 100 110 120
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
342
308
274
84
66 72 76
81
81
325
291
79
83
83
Qmin
70
80
90
100
110
120
130
140
150
160
170
180
0 10 20 30 40 50 60 70 80 90 100 110 120
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
3
4
5
6
0 10 20 30 40 50 60 70 80 90 100 110 120
N.P
.S.H
Met
res
APEXPUMPS
29
50 32 16 bar ISF50x32-160
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
182
164
146
173
155
0.1
0.2
0.3
0.4
0.5
0.6
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
182
164
146
57
44 4851
55
55
49
173
155
53
53
56
56
51Qmin
4
5
6
7
8
9
10
11
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
N.P
.S.H
Met
res
APEXPUMPS
30
50 32 16 bar ISF50x32-200
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
228
206
184
217
195
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
228
206
184
50
4245
4748
48
45
217
195
49
49
47
Qmin
7
8
9
10
11
12
13
14
15
16
17
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
2
3
4
5
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
N.P
.S.H
Met
res
APEXPUMPS
31
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
142065 40 16 bar ISF 65x40-200
228
206
184
217
195
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0 1 2 3 4 5 6 7 8 9 10Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
228
206
184
61
48 5255
58
58
50
217
195
60
60
55
Qmin
6
7
8
9
10
11
12
13
14
15
16
17
0 1 2 3 4 5 6 7 8 9 10
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0 1 2 3 4 5 6 7 8 9 10
N.P
.S.H
Met
res
APEXPUMPS
32
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
144065 40 16 bar ISF65x40-250
278
250
222
264
236
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0 1 2 3 4 5 6 7 8 9Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
278
250
222
54
40 44 4752
52
46
264
236
50
50
53
53
48
Qmin
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
0 1 2 3 4 5 6 7 8 9
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
0 1 2 3 4 5 6 7 8 9
N.P
.S.H
Met
res
APEXPUMPS
33
65 40 16 bar ISF65x40-315
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450
342
308
274
325
291
1
2
3
4
5
6
0 1 2 3 4 5 6 7 8 9Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
342
308
274
47.3
38 41 4346
46
43
325
291
45
45
47
47
44
Qmin
18
20
22
24
26
28
30
32
34
36
38
40
0 1 2 3 4 5 6 7 8 9
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
0 1 2 3 4 5 6 7 8 9
N.P
.S.H
Met
res
APEXPUMPS
34
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
142065 50 16 bar ISF 65x50-160
182
164
146
173
155
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 1 2 3 4 5 6 7 8Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
182
164
146
60
42 47 51
56
56
50
173
155
54
54
58
58
52Qmin
4
5
6
7
8
9
10
11
0 1 2 3 4 5 6 7 8
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
0 1 2 3 4 5 6 7 8
N.P
.S.H
Met
res
APEXPUMPS
35
80 50 16 bar ISF 80x50-200
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1440
228
206
184
217
195
0.5
1.0
1.5
2.0
2.5
3.0
0 2 4 6 8 10 12 14 16Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
228
206
184
72
48 58 62
68
68
61
217
195
66
6670
70
64
Qmin
7
8
9
10
11
12
13
14
15
16
17
18
19
0 2 4 6 8 10 12 14 16
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
0 2 4 6 8 10 12 14 16
N.P
.S.H
Met
res
APEXPUMPS
36
80 50 16 bar ISF 80x50-250
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450
278
250
222
264
236
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
0 2 4 6 8 10 12 14 16 18 20Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
278
250
222
67
52 57 60
65
65
57
264
236
63
63
66
66
60
Qmin
10
12
14
16
18
20
22
24
26
28
0 2 4 6 8 10 12 14 16 18 20
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
0 2 4 6 8 10 12 14 16 18 20
N.P
.S.H
Met
res
APEXPUMPS
37
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
145080 50 16 bar ISF80x50-315
342
308
274
325
291
1
2
3
4
5
6
7
8
9
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
342
308
274
57.4
45 49 5255
55
50
325
291
54
54
56
56
52
Qmin
18
20
22
24
26
28
30
32
34
36
38
40
42
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
N.P
.S.H
Met
res
APEXPUMPS
38
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
142080 65 16 bar ISF 80x65-160
182
164
146
173
155
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
182
164
146
76
60 6670
74
74
66
173
15572
72
75
75
70
Qmin
4
5
6
7
8
9
10
11
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
N.P
.S.H
Met
res
APEXPUMPS
39
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450100 65 16 bar ISF 100x65-200
228
206
184
217
195
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
228
206
184
76
54 60 65
72
72
61
217
195
69
69
74
74
65
Qmin
7
8
9
10
11
12
13
14
15
16
17
18
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
N.P
.S.H
Met
res
APEXPUMPS
40
100 65 16 bar ISF 100x65-250
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450
278
250
222
264
236
1
2
3
4
5
6
7
8
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
278
250
222
77
53 59 64
71
71
63
264
23668
6874
74
66
Qmin
10
12
14
16
18
20
22
24
26
28
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
N.P
.S.H
Met
res
APEXPUMPS
41
100 65 16 bar ISF100x65-315
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1460
342
308
274
325
291
2
4
6
8
10
12
14
16
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
342
308
274
65
53 5760
63
63
58
325
291
62
62
64
64
60
Qmin
18
20
22
24
26
28
30
32
34
36
38
40
42
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
N.P
.S.H
Met
res
APEXPUMPS
42
100 80 16 bar ISF 100x80-160
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
182
164
146
173
155
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
0 2 4 6 8 10 12 14 16 18 20 22 24 26Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
182
164
146
76
60 6569
73
73
67
173
15571
71
74
74
69
Qmin
4
5
6
7
8
9
10
11
0 2 4 6 8 10 12 14 16 18 20 22 24 26
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0 2 4 6 8 10 12 14 16 18 20 22 24 26
N.P
.S.H
Met
res
APEXPUMPS
43
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475125 80 16 bar ISF125x80-400
438
394
350
416
372
5
10
15
20
25
30
35
0 5 10 15 20 25 30 35 40 45Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
438
394
350
62.6
48 53 5761
61
53
416
372
59
59
62
62
57
Qmin
25
30
35
40
45
50
55
60
65
70
75
0 5 10 15 20 25 30 35 40 45
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
0
1
2
3
0 5 10 15 20 25 30 35 40 45
N.P
.S.H
Met
res
APEXPUMPS
44
125 100 16 bar ISF 125x100-200
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450
228
206
184
217
195
1
2
3
4
5
6
7
8
0 10 20 30 40 50 60Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
228
206
184
84
65 72 77
82
82
75
217
195
80
8083
83
77
Qmin
6
7
8
9
10
11
12
13
14
15
16
17
18
0 10 20 30 40 50 60
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0 10 20 30 40 50 60
N.P
.S.H
Met
res
APEXPUMPS
45
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1460125 100 16 bar ISF 125x100-250
278
250
222
264
236
2
3
4
5
6
7
8
9
10
11
12
13
14
0 10 20 30 40 50 60Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
278
250
222
82
63 68 72
77
77
69
264
236
75
7579
79
72
Qmin
10
12
14
16
18
20
22
24
26
28
0 10 20 30 40 50 60
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
0 10 20 30 40 50 60
N.P
.S.H
Met
res
APEXPUMPS
46
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475125 100 16 bar ISF125x100-315
342
308
274
325
291
2
4
6
8
10
12
14
16
18
20
22
24
0 5 10 15 20 25 30 35 40 45 50 55 60 65Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
342
308
274
79.8
68 72 7578
78
72
325
291
77
77
79
79
75
Qmin
18
20
22
24
26
28
30
32
34
36
38
40
42
44
0 5 10 15 20 25 30 35 40 45 50 55 60 65
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0 5 10 15 20 25 30 35 40 45 50 55 60 65
N.P
.S.H
Met
res
APEXPUMPS
47
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475125 100 16 bar ISF125x100-400
438
394
350
416
372
5
10
15
20
25
30
35
40
45
50
0 5 10 15 20 25 30 35 40 45 50 55 60 65Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
438
394
350
70.2
58 62 6569
69
63
416
372
67
67
70
70
65
Qmin
30
35
40
45
50
55
60
65
70
0 5 10 15 20 25 30 35 40 45 50 55 60 65
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0 5 10 15 20 25 30 35 40 45 50 55 60 65
N.P
.S.H
Met
res
APEXPUMPS
48
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480125 100 16 bar ISF 125x100-500
547
493
439
520
466
10
20
30
40
50
60
70
80
90
100
0 10 20 30 40 50 60 70Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
547
493
439
57.2
46 5053
56
56
52
520
46655
55
57
57
53
Qmin
45
50
55
60
65
70
75
80
85
90
95
100
105
110
0 10 20 30 40 50 60 70
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
0 10 20 30 40 50 60 70
N.P
.S.H
Met
res
APEXPUMPS
49
150 125 16 bar ISF 150x125-250
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
278
252
226
265
239
4
6
8
10
12
14
16
18
20
22
0 10 20 30 40 50 60 70 80 90 100 110Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
278
252
226
84
65 70 74
81
81
67
265
239 78
78
83
83
74
Qmin
8
10
12
14
16
18
20
22
24
26
0 10 20 30 40 50 60 70 80 90 100 110
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
2
3
4
5
6
7
0 10 20 30 40 50 60 70 80 90 100 110
N.P
.S.H
Met
res
APEXPUMPS
50
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475150 125 16 bar ISF 150x125-315
342
308
274
325
291
5
10
15
20
25
30
35
0 10 20 30 40 50 60 70 80 90 100 110Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
342
308
274
86
69 74 78
83
83
325
291
81
81
85
85
78
Qmin
16
18
20
22
24
26
28
30
32
34
36
38
40
42
0 10 20 30 40 50 60 70 80 90 100 110
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
0 10 20 30 40 50 60 70 80 90 100 110
N.P
.S.H
Met
res
APEXPUMPS
51
150 125 16 bar ISF150x125-400
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480
438
394
350
416
372
10
20
30
40
50
60
70
0 10 20 30 40 50 60 70 80 90 100 110Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
438
394
350
80.2
67 71 7478
78
71
416
372
77
77
79
79
74
Qmin
30
35
40
45
50
55
60
65
70
0 10 20 30 40 50 60 70 80 90 100 110
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
0
2
4
6
8
0 10 20 30 40 50 60 70 80 90 100 110
N.P
.S.H
Met
res
APEXPUMPS
52
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480150 125 16 bar ISF150x125-500
547
493
439
520
466
10
20
30
40
50
60
70
80
90
100
110
120
130
0 10 20 30 40 50 60 70 80 90 100 110Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
547
493
439
66.5
5861
63
65
65
61
520
466
64
64
66
66
62
Qmin
50
55
60
65
70
75
80
85
90
95
100
105
110
0 10 20 30 40 50 60 70 80 90 100 110
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
0
2
4
6
0 10 20 30 40 50 60 70 80 90 100 110
N.P
.S.H
Met
res
APEXPUMPS
53
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480200 150 16 bar ISF200x150-315
342
308
274
325
291
10
15
20
25
30
35
40
45
50
55
60
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
342
308
274
81.1
68 72 7578
78
325
291
77
77
79
79
75
Qmin
18
20
22
24
26
28
30
32
34
36
38
40
42
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
2
4
6
8
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160
N.P
.S.H
Met
res
APEXPUMPS
54
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480200 150 16 bar ISF200x150-400
438
394
350
416
372
10
20
30
40
50
60
70
80
90
100
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
438
394
350
80.9
68 72 74
78
78
71
416
372
77
77
79
79
74
Qmin
25
30
35
40
45
50
55
60
65
70
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
2
3
4
5
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
N.P
.S.H
Met
res
APEXPUMPS
55
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480200 150 16 bar ISF 200x150-500
547
493
439
520
466
20
40
60
80
100
120
140
160
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180Flow L/Sec
Pow
er k
W
Data based on clean cold water
Power based on Specific gravity=1.0
547
493
439
77
58 64 68
73
73
66
520
466
71
7175
75
68
Qmin
45
50
55
60
65
70
75
80
85
90
95
100
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
1
2
3
4
5
6
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
N.P
.S.H
Met
res
APEXPUMPS
56
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480250 200 16 bar ISF250x200-315
342
308
274
325
291
15
20
25
30
35
40
45
50
55
60
65
70
75
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
342
308
274
84.1
68 72 75
81
81
325
291
78
78
83
83
75
Qmin
12
14
16
18
20
22
24
26
28
30
32
34
36
38
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
3
4
5
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280
N.P
.S.H
Met
res
APEXPUMPS
57
Pump Performance curve to BS 9906:2000
ISO 2858 HORIZONTAL END SUCTION PUMP APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480250 200 16 bar ISF250x200-400
432
391
350
411.5
370.5
30
40
50
60
70
80
90
100
110
120
130
140
150
160
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300Flow L/Sec
Pow
er k
W
Power based on Specific gravity=1.0
Data based on clean cold water
432
391
350
85.3
69 73 76
81
81
73
411.5
370.5
79
79
83
83
76
Qmin
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m .
3
4
5
6
7
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
N.P
.S.H
Met
res
APEXPUMPS
58
ISF bareshaft pump dimensions
N4
M2
M1
W
Fa
N3
N1
B
D
S2
N2
H1
H2
H0
L
Hf
S1
Pump Shaft Flanges Outline Dimensions Foot Dims Bolt Holes Rear Support Foot Shaft size group IN OUT a F H1 H2 N1 N2 M1 M2 B H0 S1 S2 W Hf N3 N4 D L kg
50x32-160 1 50 32 80 385 132 160 240 190 100 70 50 12 14 14 285 5 140 110 24 50 38 50x32-200 1 50 32 80 385 160 180 240 190 100 70 50 12 14 14 285 5 140 110 24 50 46
65x50-160 1 65 50 80 385 132 160 240 190 100 70 50 12 14 14 285 5 140 110 24 50 40 65x40-200 1 65 40 100 385 160 180 265 212 100 70 50 12 14 14 285 5 140 110 24 50 48 65x40-250 2 65 40 100 500 180 225 320 250 125 95 65 16 14 14 370 5 140 110 32 80 70 65x40-315 2 65 40 125 500 200 250 345 280 125 95 65 16 14 14 370 5 140 110 32 80 80
80x65-160 1 80 65 100 385 160 180 265 212 100 70 50 12 14 14 285 5 140 110 24 50 46 80x50-200 1 80 50 100 385 160 200 265 212 100 70 50 12 14 14 285 5 140 110 24 50 52 80x50-250 2 80 50 125 500 180 225 320 250 125 95 65 16 14 14 370 5 140 110 32 80 72 80x50-315 2 80 50 125 500 225 280 345 280 125 95 65 16 14 14 370 5 140 110 32 80 87
100x80-160 2 100 80 100 500 160 200 280 212 125 95 65 16 14 14 370 5 140 110 32 80 68 100x65-200 2 100 65 100 500 180 225 320 250 125 95 65 16 14 14 370 5 140 110 32 80 70 100x65-250 2 100 65 125 500 200 250 360 280 160 120 80 16 20 14 370 5 140 110 32 80 80 100x65-315 3 100 65 125 530 225 280 400 315 160 120 80 20 20 14 370 5 140 110 42 110 118 125x80-400 3 125 80 125 530 280 355 435 355 160 120 80 20 20 14 370 5 140 110 42 110 165
125x100-200 2 125 100 125 500 200 280 360 280 160 120 80 16 20 14 370 5 140 110 32 80 85 125x100-250 3 125 100 140 530 225 280 400 315 160 120 80 20 20 14 370 5 140 110 42 110 126 125x100-315 3 125 100 140 530 250 315 400 315 160 120 80 20 20 14 370 5 140 110 42 110 135 125x100-400 3 125 100 140 530 280 355 500 400 200 150 100 20 24 14 370 5 140 110 42 110 175 125x100-500 4 125 100 160 670 355 450 550 450 200 150 80 25 24 20 500 10 170 140 48 110 313
150x125-250 3 150 125 140 530 250 355 400 315 160 120 80 20 20 14 370 5 140 110 42 110 140 150x125-315 3 150 125 140 530 280 355 500 400 200 150 100 20 24 14 370 5 140 110 42 110 150 150x125-400 3 150 125 140 530 315 400 500 400 200 150 100 20 24 14 370 5 140 110 42 110 186 150x125-500 4 150 125 160 670 355 450 550 450 200 150 100 25 24 20 500 10 170 140 48 110 336
200x150-315 4 200 150 160 670 315 400 550 450 200 150 100 25 24 20 500 10 170 140 48 110 222 200x150-400 4 200 150 160 670 315 450 550 450 200 150 100 25 24 20 500 10 170 140 48 110 300 200x150-500 4 200 150 160 670 400 500 550 450 200 150 100 25 24 20 500 10 170 140 48 110 382 250x200-315 4 250 200 180 670 315 450 550 450 200 150 100 25 24 20 500 10 170 140 48 110 277 250x200-400 4 250 200 180 670 355 500 550 450 200 150 100 25 24 20 500 10 170 140 48 110 340
APEXPUMPS
59
ISF pumpset dimensions
2-Pole Pumpsets
4 HOLES d ØAL2
L1
L2
B3
B2
B1
H1
H0
H2
a
IN
OUT
F X Lm
Dimensions are for indication only. Certified drawings are available for installation purposes.
Pump Motor Flanges Pump dimensions Bedplate dimensions Estimated Model kW In out a F H1 H2 Ref H0 A L1 L2 B1 B2 B3 d X Lm dB (A) kg
50x32-160 2.2 50 32 80 385 132 160 3a 75 60 900 150 290 390 350 18 100 329 72 87 50x32-160 3 50 32 80 385 132 160 3a 75 60 900 150 290 390 350 18 100 376 71 96 50x32-160 4 50 32 80 385 132 160 3a 75 60 900 150 290 390 350 18 100 393 68 107 50x32-160 5.5 50 32 80 385 132 160 4a 75 60 1000 170 350 450 400 22 100 452 72 131 50x32-160 7.5 50 32 80 385 132 160 4a 75 60 1000 170 350 450 400 22 100 452 72 137
50x32-200 4 50 32 80 385 160 180 3b 75 75 900 150 290 390 350 18 100 393 68 124 50x32-200 5.5 50 32 80 385 160 180 4a 75 60 1000 170 350 450 400 22 100 452 72 139 50x32-200 7.5 50 32 80 385 160 180 4a 75 60 1000 170 350 450 400 22 100 452 72 145 50x32-200 11 50 32 80 385 160 180 5a 100 60 1120 190 360 490 440 22 100 598 74 199 50x32-200 15 50 32 80 385 160 180 5a 100 60 1120 190 360 490 440 22 100 598 74 206
65x50-160 4 65 50 80 385 132 160 3b 75 75 900 150 290 390 350 18 100 393 68 118 65x50-160 5.5 65 50 80 385 132 160 4a 75 60 1000 170 350 450 400 22 100 452 72 133 65x50-160 7.5 65 50 80 385 132 160 4a 75 60 1000 170 350 450 400 22 100 452 72 139 65x50-160 11 65 50 80 385 132 160 5a 100 60 1120 190 360 490 440 22 100 598 74 193
65x40-200 7.5 65 40 100 385 160 180 4a 75 60 1000 170 350 450 400 22 100 452 72 147 65x40-200 11 65 40 100 385 160 180 5a 100 60 1120 190 360 490 440 22 100 598 74 201 65x40-200 15 65 40 100 385 160 180 5a 100 60 1120 190 360 490 440 22 100 598 74 208 65x40-200 18.5 65 40 100 385 160 180 5a 100 60 1120 190 360 490 440 22 100 642 74 223 65x40-200 22 65 40 100 385 160 180 6c 100 90 1250 205 410 540 490 22 100 664 74 298
65x40-250 11 65 40 100 500 180 225 6b 100 75 1250 205 410 540 490 22 100 598 74 241 65x40-250 15 65 40 100 500 180 225 6b 100 75 1250 205 410 540 490 22 100 598 74 248 65x40-250 18.5 65 40 100 500 180 225 6b 100 75 1250 205 410 540 490 22 100 642 74 263 65x40-250 22 65 40 100 500 180 225 6b 100 75 1250 205 410 540 490 22 100 664 74 309 65x40-250 30 65 40 100 500 180 225 7b 100 75 1400 230 480 610 550 25 100 767 78 385 65x40-250 37 65 40 100 500 180 225 7b 100 75 1400 230 480 610 550 25 100 767 78 399
65x40-315 22 65 40 125 500 200 250 7b 100 75 1400 230 480 610 550 25 100 664 74 328 65x40-315 30 65 40 125 500 200 250 7b 100 75 1400 230 480 610 550 25 100 767 78 395
65x40-315 37 65 40 125 500 200 250 7b 100 75 1400 230 480 610 550 25 100 767 78 409
65x40-315 45 65 40 125 500 200 250 7b 100 75 1400 230 480 610 550 25 100 817 82 567 65x40-315 55 65 40 125 500 200 250 8d 152 110 1600 270 508 660 600 25 100 923 82 704
APEXPUMPS
60
ISF pumpset dimensions
2-Pole Pumpsets
4 HOLES d ØAL2
L1
L2
B3
B2
B1
H1
H0
H2
a
IN
OUT
F X Lm
Dimensions are for indication only. Certified drawings are available for installation purposes.
Pump Motor Flanges Pump dimensions Bedplate dimensions Estimated Model kW In out a F H1 H2 Ref H0 A L1 L2 B1 B2 B3 d X Lm dB (A) kg
80x65-160 5.5 80 65 100 385 160 180 4a 75 60 1000 170 350 450 400 22 100 452 72 139 80x65-160 7.5 80 65 100 385 160 180 4a 75 60 1000 170 350 450 400 22 100 452 72 145 80x65-160 11 80 65 100 385 160 180 5a 100 60 1120 190 360 490 440 22 100 598 74 199 80x65-160 15 80 65 100 385 160 180 5a 100 60 1120 190 360 490 440 22 100 598 74 206 80x65-160 18.5 80 65 100 385 160 180 5a 100 60 1120 190 360 490 440 22 100 642 74 221
80x50-200 11 80 50 100 385 160 200 5a 100 60 1120 190 360 490 440 22 100 598 74 205 80x50-200 15 80 50 100 385 160 200 5a 100 60 1120 190 360 490 440 22 100 598 74 212 80x50-200 18.5 80 50 100 385 160 200 5a 100 60 1120 190 360 490 440 22 100 642 74 227 80x50-200 22 80 50 100 385 160 200 5a 100 60 1120 190 360 490 440 22 100 664 74 273 80x50-200 30 80 50 100 385 160 200 6b 100 75 1250 205 410 540 490 22 100 767 78 358 80x50-200 37 80 50 100 385 160 200 6b 100 75 1250 205 410 540 490 22 100 767 78 372
80x50-250 18.5 80 50 125 500 180 225 7b 100 75 1400 230 480 610 550 25 100 642 74 274 80x50-250 22 80 50 125 500 180 225 7b 100 75 1400 230 480 610 550 25 100 664 74 320 80x50-250 30 80 50 125 500 180 225 7b 100 75 1400 230 480 610 550 25 100 767 78 387 80x50-250 37 80 50 125 500 180 225 7b 100 75 1400 230 480 610 550 25 100 767 78 401 80x50-250 45 80 50 125 500 180 225 7b 100 75 1400 230 480 610 550 25 100 817 82 559 80x50-250 55 80 50 125 500 180 225 8d 152 110 1600 270 508 660 600 25 100 923 82 696
80x50-315 30 80 50 125 500 225 280 7b 100 75 1400 230 480 610 550 25 100 767 78 402 80x50-315 37 80 50 125 500 225 280 7b 100 75 1400 230 480 610 550 25 100 767 78 416 80x50-315 45 80 50 125 500 225 280 7b 100 75 1400 230 480 610 550 25 100 817 82 574 80x50-315 55 80 50 125 500 225 280 8c 152 90 1600 270 508 660 600 25 100 923 82 699 80x50-315 75 80 50 125 500 225 280 9d 152 110 1800 300 578 730 670 25 100 1036 83 894
100x80-160 7.5 100 80 100 500 160 200 5a 100 60 1120 190 360 490 440 22 100 452 72 184 100x80-160 11 100 80 100 500 160 200 6b 100 75 1250 205 410 540 490 22 100 598 74 239 100x80-160 15 100 80 100 500 160 200 6b 100 75 1250 205 410 540 490 22 100 598 74 246 100x80-160 18.5 100 80 100 500 160 200 6b 100 75 1250 205 410 540 490 22 100 642 74 261 100x80-160 22 100 80 100 500 160 200 6b 100 75 1250 205 410 540 490 22 100 664 74 307 100x80-160 30 100 80 100 500 160 200 7b 100 75 1400 230 480 610 550 25 100 767 78 383
100x65-200 18.5 100 65 100 500 180 225 6b 100 75 1250 205 410 540 490 22 140 642 74 263 100x65-200 22 100 65 100 500 180 225 6b 100 75 1250 205 410 540 490 22 140 664 74 309 100x65-200 30 100 65 100 500 180 225 7b 100 75 1400 230 480 610 550 25 140 767 78 385 100x65-200 37 100 65 100 500 180 225 7b 100 75 1400 230 480 610 550 25 140 767 78 399 100x65-200 45 100 65 100 500 180 225 7b 100 75 1400 230 480 610 550 25 140 817 82 557
APEXPUMPS
61
ISF pumpset dimensions
2-Pole Pumpsets
4 HOLES d ØAL2
L1
L2
B3
B2
B1
H1
H0
H2
a
IN
OUT
F X Lm
Dimensions are for indication only. Certified drawings are available for installation purposes.
Pump Motor Flanges Pump dimensions Bedplate dimensions Estimated
Model kW In out a F H1 H2 Ref H0 A L1 L2 B1 B2 B3 d X Lm dB (A) kg
100x65-250 30 100 65 125 500 200 250 7b 100 75 1400 230 480 610 550 25 140 767 78 395
100x65-250 37 100 65 125 500 200 250 7b 100 75 1400 230 480 610 550 25 140 767 78 409
100x65-250 45 100 65 125 500 200 250 7b 100 75 1400 230 480 610 550 25 140 817 82 567
100x65-250 55 100 65 125 500 200 250 8c 152 90 1600 270 508 660 600 25 140 923 82 692
100x65-250 75 100 65 125 500 200 250 9c 152 90 1800 300 578 730 670 25 140 1036 83 872
100x65-250 90 100 65 125 500 200 250 9c 152 90 1800 300 578 730 670 25 140 1036 83 922
100x65-315 55 100 65 125 530 225 280 8c 152 90 1600 270 508 660 600 25 140 923 82 730
100x65-315 75 100 65 125 530 225 280 9c 152 90 1800 300 578 730 670 25 140 1036 83 910
100x65-315 90 100 65 125 530 225 280 9c 152 90 1800 300 578 730 670 25 140 1036 83 960
100x65-315 110 100 65 125 530 225 280 9c 152 90 1800 300 578 730 670 25 140 1126 85 1078
100x65-315 132 100 65 125 530 225 280 9c 152 90 1800 300 578 730 670 25 140 1126 85 1192
125x100-200 30 125 100 125 500 200 280 7b 100 75 1400 230 480 610 550 25 140 767 78 400
125x100-200 37 125 100 125 500 200 280 7b 100 75 1400 230 480 610 550 25 140 767 78 414
125x100-200 45 125 100 125 500 200 280 7b 100 75 1400 230 480 610 550 25 140 817 82 572
125x100-200 55 125 100 125 500 200 280 8c 152 90 1600 270 508 660 600 25 140 923 82 697
125x100-200 75 125 100 125 500 200 280 9c 152 90 1800 300 578 730 670 25 140 1036 83 877
125x100-200 90 125 100 125 500 200 280 9c 152 90 1800 300 578 730 670 25 140 1036 83 927
125x100-250 45 125 100 140 530 225 280 7b 100 75 1400 230 480 610 550 25 140 817 82 613
125x100-250 55 125 100 140 530 225 280 8d 152 110 1600 270 508 660 600 25 140 923 82 750
125x100-250 75 125 100 140 530 225 280 9d 152 110 1800 300 578 730 670 25 140 1036 83 933
125x100-250 90 125 100 140 530 225 280 9d 152 110 1800 300 578 730 670 25 140 1036 83 983
125x100-250 110 125 100 140 530 225 280 9d 152 110 1800 300 578 730 670 25 140 1126 85 1101
125x100-315 75 125 100 140 530 250 315 9d 152 110 1800 300 578 730 670 25 140 1036 83 942
125x100-315 90 125 100 140 530 250 315 9d 152 110 1800 300 578 730 670 25 140 1036 83 992
125x100-315 110 125 100 140 530 250 315 9d 152 110 1800 300 578 730 670 25 140 1126 85 1110
125x100-315 132 125 100 140 530 250 315 9d 152 110 1800 300 578 730 670 25 140 1126 85 1224
125x100-315 160 125 100 140 530 250 315 9d 152 110 1800 300 578 730 670 25 140 1126 85 1297 125x100-315 200 125 100 140 530 250 315 9d 152 110 1800 300 578 730 670 25 140 1126 96 1702
APEXPUMPS
62
ISF pumpset dimensions
4-Pole Pumpsets
4 HOLES d ØAL2
L1
L2
B3
B2
B1
H1
H0
H2
a
IN
OUT
F X Lm
Dimensions are for indication only. Certified drawings are available for installation purposes.
Pump Motor Flanges Pump dimensions Bedplate dimensions Estimated
Model kW In out a F H1 H2 Ref H0 A L1 L2 B1 B2 B3 d X Lm dB(A) kg
50x32-160 0.55 50 32 80 385 132 160 2a 75 60 800 130 260 360 320 18 100 276 47 77
50x32-160 0.75 50 32 80 385 132 160 2a 75 60 800 130 260 360 320 18 100 276 47 78
50x32-160 1.1 50 32 80 385 132 160 2a 75 60 800 130 260 360 320 18 100 304 50 83
50x32-200 0.55 50 32 80 385 160 180 2a 75 60 800 130 260 360 320 18 100 276 47 85
50x32-200 0.75 50 32 80 385 160 180 2a 75 60 800 130 260 360 320 18 100 276 47 86
50x32-200 1.1 50 32 80 385 160 180 2a 75 60 800 130 260 360 320 18 100 304 50 91
50x32-200 1.5 50 32 80 385 160 180 2a 75 60 800 130 260 360 320 18 100 329 50 94
65x50-160 0.55 65 50 80 385 132 160 2a 75 60 800 130 260 360 320 18 100 276 47 79
65x50-160 0.75 65 50 80 385 132 160 2a 75 60 800 130 260 360 320 18 100 276 47 80
65x50-160 1.1 65 50 80 385 132 160 2a 75 60 800 130 260 360 320 18 100 304 50 85
65x50-160 1.5 65 50 80 385 132 160 3a 75 60 900 150 290 390 350 18 100 329 50 90
65x40-200 0.75 65 40 100 385 160 180 3a 75 60 900 150 290 390 350 18 100 276 47 90
65x40-200 1.1 65 40 100 385 160 180 3a 75 60 900 150 290 390 350 18 100 304 50 95
65x40-200 1.5 65 40 100 385 160 180 3a 75 60 900 150 290 390 350 18 100 329 50 98
65x40-200 2.2 65 40 100 385 160 180 3a 75 60 900 150 290 390 350 18 100 376 54 106
65x40-200 3 65 40 100 385 160 180 3a 75 60 900 150 290 390 350 18 100 376 54 109
65x40-250 1.5 65 40 100 500 180 225 4b 75 75 1000 170 350 450 400 22 100 329 50 135
65x40-250 2.2 65 40 100 500 180 225 4b 75 75 1000 170 350 450 400 22 100 376 54 143
65x40-250 3 65 40 100 500 180 225 4b 75 75 1000 170 350 450 400 22 100 376 54 146
65x40-250 4 65 40 100 500 180 225 4b 75 75 1000 170 350 450 400 22 100 393 58 158
65x40-250 5.5 65 40 100 500 180 225 5b 100 75 1120 190 360 490 440 22 100 452 61 190
65x40-315 2.2 65 40 125 500 200 250 5b 100 75 1120 190 360 490 440 22 100 376 54 171
65x40-315 3 65 40 125 500 200 250 5b 100 75 1120 190 360 490 440 22 100 376 54 174
65x40-315 4 65 40 125 500 200 250 5b 100 75 1120 190 360 490 440 22 100 393 58 186
65x40-315 5.5 65 40 125 500 200 250 5b 100 75 1120 190 360 490 440 22 100 452 61 200
65x40-315 7.5 65 40 125 500 200 250 5b 100 75 1120 190 360 490 440 22 100 490 61 207
APEXPUMPS
63
ISF pumpset dimensions
4-Pole Pumpsets
4 HOLES d ØAL2
L1
L2
B3
B2
B1
H1
H0
H2
a
IN
OUT
F X Lm
Dimensions are for indication only. Certified drawings are available for installation purposes.
Pump Motor Flanges Pump dimensions Bedplate dimensions Estimated Model kW In out a F H1 H2 Ref H0 A L1 L2 B1 B2 B3 d X Lm dB(A) kg
80x65-160 0.75 80 65 100 385 160 180 3a 75 60 900 150 290 390 350 18 100 276 47 88 80x65-160 1.1 80 65 100 385 160 180 3a 75 60 900 150 290 390 350 18 100 304 50 93 80x65-160 1.5 80 65 100 385 160 180 3a 75 60 900 150 290 390 350 18 100 329 50 96 80x65-160 2.2 80 65 100 385 160 180 3b 75 75 900 150 290 390 350 18 100 376 54 113 80x65-160 3 80 65 100 385 160 180 3b 75 75 900 150 290 390 350 18 100 376 54 116
80x50-200 1.5 80 50 100 385 160 200 3a 75 60 900 150 290 390 350 18 100 329 50 102 80x50-200 2.2 80 50 100 385 160 200 3a 75 60 900 150 290 390 350 18 100 376 54 110 80x50-200 3 80 50 100 385 160 200 3a 75 60 900 150 290 390 350 18 100 376 54 113 80x50-200 4 80 50 100 385 160 200 3a 75 60 900 150 290 390 350 18 100 393 58 125 80x50-200 5.5 80 50 100 385 160 200 4b 75 75 1000 170 350 450 400 22 100 452 61 154
80x50-250 3 80 50 125 500 180 225 4b 75 75 1000 170 350 450 400 22 100 376 54 148 80x50-250 4 80 50 125 500 180 225 4b 75 75 1000 170 350 450 400 22 100 393 58 160 80x50-250 5.5 80 50 125 500 180 225 5b 100 75 1120 190 360 490 440 22 100 452 61 192 80x50-250 7.5 80 50 125 500 180 225 5b 100 75 1120 190 360 490 440 22 100 490 61 199 80x50-250 11 80 50 125 500 180 225 6b 100 75 1250 205 410 540 490 22 100 598 65 244
80x50-315 4 80 50 125 500 225 280 5b 100 75 1120 190 360 490 440 22 100 393 58 193 80x50-315 5.5 80 50 125 500 225 280 5b 100 75 1120 190 360 490 440 22 100 452 61 207 80x50-315 7.5 80 50 125 500 225 280 5b 100 75 1120 190 360 490 440 22 100 490 61 214 80x50-315 11 80 50 125 500 225 280 6b 100 75 1250 205 410 540 490 22 100 598 65 259
100x80-160 1.1 100 80 100 500 160 200 4b 75 75 1000 170 350 450 400 22 100 304 50 130 100x80-160 1.5 100 80 100 500 160 200 4b 75 75 1000 170 350 450 400 22 100 329 50 133 100x80-160 2.2 100 80 100 500 160 200 4b 75 75 1000 170 350 450 400 22 100 376 54 141 100x80-160 3 100 80 100 500 160 200 4b 75 75 1000 170 350 450 400 22 100 376 54 144 100x80-160 4 100 80 100 500 160 200 4b 75 75 1000 170 350 450 400 22 100 393 58 156 100x80-160 5.5 100 80 100 500 160 200 5b 100 75 1120 190 360 490 440 22 100 452 61 188
100x65-200 3 100 65 100 500 180 225 5b 100 75 1120 190 360 490 440 22 140 376 54 164 100x65-200 4 100 65 100 500 180 225 5b 100 75 1120 190 360 490 440 22 140 393 58 176 100x65-200 5.5 100 65 100 500 180 225 5b 100 75 1120 190 360 490 440 22 140 452 61 190 100x65-200 7.5 100 65 100 500 180 225 5b 100 75 1120 190 360 490 440 22 140 490 61 197 100x65-200 11 100 65 100 500 180 225 6c 100 90 1250 205 410 540 490 22 140 598 65 253
APEXPUMPS
64
ISF pumpset dimensions
4-Pole Pumpsets
4 HOLES d ØAL2
L1
L2
B3
B2
B1
H1
H0
H2
a
IN
OUT
F X Lm
Dimensions are for indication only. Certified drawings are available for installation purposes.
Pump Motor Flanges Pump dimensions Bedplate dimensions Estimated Model kW In out a F H1 H2 Ref H0 A L1 L2 B1 B2 B3 d X Lm dB(A) kg
100x65-250 4 100 65 125 500 200 250 5b 100 75 1120 190 360 490 440 22 140 393 58 186 100x65-250 5.5 100 65 125 500 200 250 5b 100 75 1120 190 360 490 440 22 140 452 61 200 100x65-250 7.5 100 65 125 500 200 250 5b 100 75 1120 190 360 490 440 22 140 490 61 207 100x65-250 11 100 65 125 500 200 250 6c 100 90 1250 205 410 540 490 22 140 598 65 263 100x65-250 15 100 65 125 500 200 250 6c 100 90 1250 205 410 540 490 22 140 642 65 279
100x65-315 7.5 100 65 125 530 225 280 6b 100 75 1250 205 410 540 490 22 140 490 61 252 100x65-315 11 100 65 125 530 225 280 6c 100 90 1250 205 410 540 490 22 140 598 65 301 100x65-315 15 100 65 125 530 225 280 7d 100 110 1400 230 480 610 550 25 140 642 65 340 100x65-315 18.5 100 65 125 530 225 280 7d 100 110 1400 230 480 610 550 25 140 664 67 379 100x65-315 22 100 65 125 530 225 280 7d 100 110 1400 230 480 610 550 25 140 702 67 402
125x80-400 15 125 80 125 530 280 355 7c 100 90 1400 230 480 610 550 25 140 642 65 375 125x80-400 18.5 125 80 125 530 280 355 7d 100 110 1400 230 480 610 550 25 140 664 67 426 125x80-400 22 125 80 125 530 280 355 7d 100 110 1400 230 480 610 550 25 140 702 67 449 125x80-400 30 125 80 125 530 280 355 7d 100 110 1400 230 480 610 550 25 140 767 70 499 125x80-400 37 125 80 125 530 280 355 8d 152 110 1600 270 508 660 600 25 140 847 73 649
125x100-200 4 125 100 125 500 200 280 5b 100 75 1120 190 360 490 440 22 140 393 58 191 125x100-200 5.5 125 100 125 500 200 280 5b 100 75 1120 190 360 490 440 22 140 452 61 205 125x100-200 7.5 125 100 125 500 200 280 5b 100 75 1120 190 360 490 440 22 140 490 61 212 125x100-200 11 125 100 125 500 200 280 6c 100 90 1250 205 410 540 490 22 140 598 65 268 125x100-200 15 125 100 125 500 200 280 6c 100 90 1250 205 410 540 490 22 140 642 65 284
125x100-250 7.5 125 100 140 530 225 280 5b 100 75 1120 190 360 490 440 22 140 490 61 253 125x100-250 11 125 100 140 530 225 280 6c 100 90 1250 205 410 540 490 22 140 598 65 309 125x100-250 15 125 100 140 530 225 280 7c 100 90 1400 230 480 610 550 25 140 642 65 336 125x100-250 18.5 125 100 140 530 225 280 7c 100 90 1400 230 480 610 550 25 140 664 67 375 125x100-250 22 125 100 140 530 225 280 7c 100 90 1400 230 480 610 550 25 140 702 67 398
125x100-315 11 125 100 140 530 250 315 6c 100 90 1250 205 410 540 490 22 140 598 65 318 125x100-315 15 125 100 140 530 250 315 7d 100 110 1400 230 480 610 550 25 140 642 65 357 125x100-315 18.5 125 100 140 530 250 315 7d 100 110 1400 230 480 610 550 25 140 664 67 396 125x100-315 22 125 100 140 530 250 315 7d 100 110 1400 230 480 610 550 25 140 702 67 419 125x100-315 30 125 100 140 530 250 315 7d 100 110 1400 230 480 610 550 25 140 767 70 469
APEXPUMPS
65
ISF pumpset dimensions
4-Pole Pumpsets
4 HOLES d ØAL2
L1
L2
B3
B2
B1
H1
H0
H2
a
IN
OUT
F X Lm
Dimensions are for indication only. Certified drawings are available for installation purposes.
Pump Motor Flanges Pump dimensions Bedplate dimensions Estimated Model kW In out a F H1 H2 Ref H0 A L1 L2 B1 B2 B3 d X Lm dB(A) kg
125x100-400 22 125 100 140 530 280 355 8c 152 90 1600 270 508 660 600 25 140 702 67 480 125x100-400 30 125 100 140 530 280 355 8c 152 90 1600 270 508 660 600 25 140 767 70 530 125x100-400 37 125 100 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 847 73 659 125x100-400 45 125 100 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 847 73 691 125x100-400 55 125 100 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 923 73 769 125x100-400 75 125 100 140 530 280 355 9d 152 110 1800 300 578 730 670 25 140 1036 77 1062
125x100-500 45 125 100 160 670 355 450 8d 152 110 1600 270 508 660 600 25 140 847 73 829 125x100-500 55 125 100 160 670 355 450 9d 152 110 1800 300 578 730 670 25 140 923 73 925 125x100-500 75 125 100 160 670 355 450 10e 152 140 1900 315 698 850 780 28 140 1036 77 1204 125x100-500 90 125 100 160 670 355 450 10e 152 140 1900 315 698 850 780 28 140 1036 77 1271 125x100-500 110 125 100 160 670 355 450 11e 203 140 2000 330 772 950 870 28 140 1156 80 1385
150x125-250 11 150 125 140 530 250 355 7c 100 90 1400 230 480 610 550 25 140 598 65 334 150x125-250 15 150 125 140 530 250 355 7c 100 90 1400 230 480 610 550 25 140 642 65 350 150x125-250 18.5 150 125 140 530 250 355 7d 100 110 1400 230 480 610 550 25 140 664 67 401 150x125-250 22 150 125 140 530 250 355 7d 100 110 1400 230 480 610 550 25 140 702 67 424 150x125-250 30 150 125 140 530 250 355 7d 100 110 1400 230 480 610 550 25 140 767 70 474
150x125-315 15 150 125 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 642 65 405 150x125-315 18.5 150 125 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 664 67 444 150x125-315 22 150 125 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 702 67 467 150x125-315 30 150 125 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 767 70 517 150x125-315 37 150 125 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 847 73 634 150x125-315 45 150 125 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 847 73 666 150x125-315 55 150 125 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 923 73 744
150x125-400 37 150 125 140 530 315 400 8d 152 110 1600 270 508 660 600 25 140 847 73 670 150x125-400 45 150 125 140 530 315 400 8d 152 110 1600 270 508 660 600 25 140 847 73 702 150x125-400 55 150 125 140 530 315 400 9c 152 90 1800 300 578 730 670 25 140 923 73 783 150x125-400 75 150 125 140 530 315 400 9c 152 90 1800 300 578 730 670 25 140 1036 77 1058 150x125-400 90 150 125 140 530 315 400 9c 152 90 1800 300 578 730 670 25 140 1036 77 1125
150x125-500 75 150 125 160 670 355 450 10e 152 140 1900 315 698 850 780 28 140 1036 77 1227 150x125-500 90 150 125 160 670 355 450 10e 152 140 1900 315 698 850 780 28 140 1036 77 1294 150x125-500 110 150 125 160 670 355 450 11e 203 140 2000 330 772 950 870 28 140 1156 80 1408 150x125-500 132 150 125 160 670 355 450 11e 203 140 2000 330 772 950 870 28 140 1156 80 1553 150x125-500 160 150 125 160 670 355 450 11e 203 140 2000 330 772 950 870 28 140 1156 80 1553
APEXPUMPS
66
ISF pumpset dimensions
4-Pole Pumpsets
4 HOLES d ØAL2
L1
L2
B3
B2
B1
H1
H0
H2
a
IN
OUT
F X Lm
Dimensions are for indication only. Certified drawings are available for installation purposes.
Pump Motor Flanges Pump dimensions Bedplate dimensions Estimated Model kW In out a F H1 H2 Ref H0 A L1 L2 B1 B2 B3 d X Lm dB(A) kg
200x150-315 30 200 150 160 670 315 400 8d 152 110 1600 270 508 660 600 25 180 767 70 589 200x150-315 37 200 150 160 670 315 400 8d 152 110 1600 270 508 660 600 25 180 847 73 706
200x150-315 45 200 150 160 670 315 400 8d 152 110 1600 270 508 660 600 25 180 847 73 738
200x150-315 55 200 150 160 670 315 400 9d 152 110 1800 300 578 730 670 25 180 923 73 834
200x150-315 75 200 150 160 670 315 400 10e 152 140 1900 315 698 850 780 28 180 1036 77 1113
200x150-315 90 200 150 160 670 315 400 10e 152 140 1900 315 698 850 780 28 180 1036 77 1180
200x150-400 45 200 150 160 670 315 450 8d 152 110 1600 270 508 660 600 25 180 847 73 816
200x150-400 55 200 150 160 670 315 450 9d 152 110 1800 300 578 730 670 25 180 923 73 912
200x150-400 75 200 150 160 670 315 450 10e 152 140 1900 315 698 850 780 28 180 1036 77 1191
200x150-400 90 200 150 160 670 315 450 10e 152 140 1900 315 698 850 780 28 180 1036 77 1258
200x150-400 110 200 150 160 670 315 450 11e 203 140 2000 330 772 950 870 28 180 1156 80 1372
200x150-400 132 200 150 160 670 315 450 11e 203 140 2000 330 772 950 870 28 180 1156 80 1517
200x150-500 90 200 150 160 670 400 500 10e 152 140 1900 315 698 850 780 28 180 1036 77 1340
200x150-500 110 200 150 160 670 400 500 11e 203 140 2000 330 772 950 870 28 180 1156 80 1454
200x150-500 132 200 150 160 670 400 500 11e 203 140 2000 330 772 950 870 28 180 1156 80 1599
200x150-500 160 200 150 160 670 400 500 11e 203 140 2000 330 772 950 870 28 180 1156 80 1599
200x150-500 200 200 150 160 670 400 500 12f 203 175 2350 380 772 950 870 28 180 1570 81 1850
250x200-315 37 250 200 180 670 315 450 8d 152 110 1600 270 508 660 600 25 180 847 73 761
250x200-315 45 250 200 180 670 315 450 8d 152 110 1600 270 508 660 600 25 180 847 73 793
250x200-315 55 250 200 180 670 315 450 9d 152 110 1800 300 578 730 670 25 180 923 73 889
250x200-315 75 250 200 180 670 315 450 10e 152 140 1900 315 698 850 780 28 180 1036 77 1168
250x200-315 90 250 200 180 670 315 450 10e 152 140 1900 315 698 850 780 28 180 1036 77 1235
250x200-315 110 250 200 180 670 315 450 11e 203 140 2000 330 772 950 870 28 180 1156 80 1349
250x200-400 75 250 200 180 670 355 500 10e 152 140 1900 315 698 850 780 28 180 1036 77 1231
250x200-400 90 250 200 180 670 355 500 10e 152 140 1900 315 698 850 780 28 180 1036 77 1298
250x200-400 110 250 200 180 670 355 500 11e 203 140 2000 330 772 950 870 28 180 1156 80 1412
250x200-400 132 250 200 180 670 355 500 11e 203 140 2000 330 772 950 870 28 180 1156 80 1557
250x200-400 160 250 200 180 670 355 500 11e 203 140 2000 330 772 950 870 28 180 1156 80 1557 250x200-400 200 250 200 180 670 355 500 12f 203 175 2350 380 772 950 870 28 180 1570 81 1808
APEXPUMPS
67
ISF close-coupled pump dimensions
2-Pole Pumps Pump Motor Motor Flanges Pump dimensions Motor Dimensions Estimated Model kW Frame In out A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 B BB C S2 Lm dB (A) kg
50x32-160 2.2 90L 50 32 80 200 132 160 240 190 100 70 100 14 222 204 125 156 56 10 279 72 60 50x32-160 3 100L 50 32 80 200 132 160 240 190 100 70 100 14 267 244 140 173 63 12 316 71 69 50x32-160 4 112M 50 32 80 200 132 160 240 190 100 70 100 14 297 274 140 177 70 12 333 68 80 50x32-160 5.5 132S 50 32 80 200 132 160 240 190 100 70 100 14 248 216 140 187 89 12 372 72 105 50x32-160 7.5 132S 50 32 80 200 132 160 240 190 100 70 100 14 248 216 140 187 89 12 372 72 105
50x32-200 4 112M 50 32 80 200 160 180 240 190 100 70 100 14 297 274 140 177 70 12 333 68 88 50x32-200 5.5 132S 50 32 80 200 160 180 240 190 100 70 100 14 323 300 140 187 89 12 372 72 113 50x32-200 7.5 132S 50 32 80 200 160 180 240 190 100 70 100 14 323 300 140 187 89 12 372 72 113 50x32-200 11 160M 50 32 80 230 160 180 240 190 100 70 100 14 308 254 210 254 108 14 488 74 172 50x32-200 15 160M 50 32 80 230 160 180 240 190 100 70 100 14 308 254 210 254 108 14 488 74 172
65x50-160 4 112M 65 50 80 200 132 160 240 190 100 70 100 14 297 274 140 177 70 12 333 68 82 65x50-160 5.5 132S 65 50 80 200 132 160 240 190 100 70 100 14 248 216 140 187 89 12 372 72 107 65x50-160 7.5 132S 65 50 80 200 132 160 240 190 100 70 100 14 248 216 140 187 89 12 372 72 107 65x50-160 11 160M 65 50 80 230 132 160 240 190 100 70 100 14 384 354 210 254 108 14 488 74 166
65x40-200 7.5 132S 65 40 100 200 160 180 265 212 100 70 100 14 323 300 140 187 89 12 372 72 115 65x40-200 11 160M 65 40 100 230 160 180 265 212 100 70 100 14 308 254 210 254 108 14 488 74 174 65x40-200 15 160M 65 40 100 230 160 180 265 212 100 70 100 14 308 254 210 254 108 14 488 74 174 65x40-200 18.5 160L 65 40 100 230 160 180 265 212 100 70 100 14 308 254 254 298 108 14 532 74 174 65x40-200 22 180M 65 40 100 230 160 180 265 212 100 70 100 14 437 397 241 294 121 14 554 74 220
65x40-250 11 160M 65 40 100 230 180 225 320 250 125 95 100 14 384 354 210 254 108 14 488 74 196 65x40-250 15 160M 65 40 100 230 180 225 320 250 125 95 100 14 384 354 210 254 108 14 488 74 196 65x40-250 18.5 160L 65 40 100 230 180 225 320 250 125 95 100 14 384 354 254 298 108 14 532 74 196 65x40-250 22 180M 65 40 100 230 180 225 320 250 125 95 100 14 350 279 241 294 121 14 554 74 242 65x40-250 30 200L 65 40 100 230 180 225 320 250 125 95 100 14 528 478 305 370 133 18 657 78 323 65x40-250 37 200L 65 40 100 230 180 225 320 250 125 95 100 14 528 478 305 370 133 18 657 78 323
65x40-315 22 180M 65 40 125 230 200 250 345 280 125 95 100 14 437 397 241 294 121 14 554 74 252 65x40-315 30 200L 65 40 125 230 200 250 345 280 125 95 100 14 385 318 305 370 133 18 657 78 333 65x40-315 37 200L 65 40 125 230 200 250 345 280 125 95 100 14 385 318 305 370 133 18 657 78 333 65x40-315 45 225S/M 65 40 125 230 200 250 345 280 125 95 100 14 566 516 286 391 149 18 707 82 491 65x40-315 55 250S/M 65 40 125 260 200 250 345 280 125 95 100 14 616 566 311 391 168 24 783 82 570
M1
M2
LmF1A
H1
H2
B1
B2
B
BB
C B4
B3
4 HOLES S1Ø
4 HOLES S2Ø
Actual motor length may varydepending on motor make supplied
WWITHDRAWAL
APEXPUMPS
68
ISF close-coupled pump dimensions
2-Pole Pumps Pump Motor Motor Flanges Pump dimensions Motor Dimensions Estimated Model kW Frame In out A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 B BB C S2 Lm dB (A) kg
80x65-160 5.5 132S 80 65 100 200 160 180 265 212 100 70 100 14 323 300 140 187 89 12 372 72 113 80x65-160 7.5 132S 80 65 100 200 160 180 265 212 100 70 100 14 323 300 140 187 89 12 372 72 113 80x65-160 11 160M 80 65 100 230 160 180 265 212 100 70 100 14 308 254 210 254 108 14 488 74 172 80x65-160 15 160M 80 65 100 230 160 180 265 212 100 70 100 14 308 254 210 254 108 14 488 74 172 80x65-160 18.5 160L 80 65 100 230 160 180 265 212 100 70 100 14 308 254 254 298 108 14 532 74 172
80x50-200 11 160M 80 50 100 230 160 200 265 212 100 70 100 14 308 254 210 254 108 14 488 74 178 80x50-200 15 160M 80 50 100 230 160 200 265 212 100 70 100 14 308 254 210 254 108 14 488 74 178 80x50-200 18.5 160L 80 50 100 230 160 200 265 212 100 70 100 14 308 254 254 298 108 14 532 74 178 80x50-200 22 180M 80 50 100 230 160 200 265 212 100 70 100 14 437 397 241 294 121 14 554 74 224 80x50-200 30 200L 80 50 100 230 160 200 265 212 100 70 100 14 528 478 305 370 133 18 657 78 305 80x50-200 37 200L 80 50 100 230 160 200 265 212 100 70 100 14 528 478 305 370 133 18 657 78 305
80x50-250 18.5 160L 80 50 125 230 180 225 320 250 125 95 100 14 384 354 254 298 108 14 532 74 198 80x50-250 22 180M 80 50 125 230 180 225 320 250 125 95 100 14 350 279 241 294 121 14 554 74 244 80x50-250 30 200L 80 50 125 230 180 225 320 250 125 95 100 14 528 478 305 370 133 18 657 78 325 80x50-250 37 200L 80 50 125 230 180 225 320 250 125 95 100 14 528 478 305 370 133 18 657 78 325 80x50-250 45 225S/M 80 50 125 230 180 225 320 250 125 95 100 14 566 516 286 391 149 18 707 82 483 80x50-250 55 250S/M 80 50 125 260 180 225 320 250 125 95 100 14 616 566 311 391 168 24 783 82 562
80x50-315 30 200L 80 50 125 230 225 280 345 280 125 95 100 14 528 478 305 370 133 18 657 78 340 80x50-315 37 200L 80 50 125 230 225 280 345 280 125 95 100 14 528 478 305 370 133 18 657 78 340 80x50-315 45 225S/M 80 50 125 230 225 280 345 280 125 95 100 14 436 356 286 391 149 18 707 82 498 80x50-315 55 250S/M 80 50 125 260 225 280 345 280 125 95 100 14 616 566 311 391 168 24 783 82 577 80x50-315 75 280S/M 80 50 125 260 225 280 345 280 125 95 100 14 657 607 368 510 190 24 896 83 792
100x80-160 7.5 132S 100 80 100 200 160 200 280 212 125 95 100 14 323 300 140 187 89 12 372 72 135 100x80-160 11 160M 100 80 100 230 160 200 280 212 125 95 100 14 308 254 210 254 108 14 488 74 194 100x80-160 15 160M 100 80 100 230 160 200 280 212 125 95 100 14 308 254 210 254 108 14 488 74 194 100x80-160 18.5 160L 100 80 100 230 160 200 280 212 125 95 100 14 308 254 254 298 108 14 532 74 194 100x80-160 22 180M 100 80 100 230 160 200 280 212 125 95 100 14 437 397 241 294 121 14 554 74 240 100x80-160 30 200L 100 80 100 230 160 200 280 212 125 95 100 14 528 478 305 370 133 18 657 78 321
100x65-200 18.5 160L 100 65 100 230 180 225 320 250 125 95 140 14 384 354 254 298 108 14 532 74 196 100x65-200 22 180M 100 65 100 230 180 225 320 250 125 95 140 14 350 279 241 294 121 14 554 74 242 100x65-200 30 200L 100 65 100 230 180 225 320 250 125 95 140 14 528 478 305 370 133 18 657 78 323 100x65-200 37 200L 100 65 100 230 180 225 320 250 125 95 140 14 528 478 305 370 133 18 657 78 323 100x65-200 45 225S/M 100 65 100 230 180 225 320 250 125 95 140 14 566 516 286 391 149 18 707 82 481
M1
M2
LmF1A
H1
H2
B1
B2
B
BB
C B4
B3
4 HOLES S1Ø
4 HOLES S2Ø
Actual motor length may varydepending on motor make supplied
WWITHDRAWAL
APEXPUMPS
69
ISF close-coupled pump dimensions
2-Pole Pumps Pump Motor Motor Flanges Pump dimensions Motor Dimensions Estimated
Model kW Frame In out A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 B BB C S2 Lm dB (A) kg
100x65-250 30 200L 100 65 125 230 200 250 360 280 160 120 140 20 385 318 305 370 133 18 657 78 333
100x65-250 37 200L 100 65 125 230 200 250 360 280 160 120 140 20 385 318 305 370 133 18 657 78 333
100x65-250 45 225S/M 100 65 125 230 200 250 360 280 160 120 140 20 566 516 286 391 149 18 707 82 491
100x65-250 55 250S/M 100 65 125 260 200 250 360 280 160 120 140 20 616 566 311 391 168 24 783 82 570
100x65-250 75 280S/M 100 65 125 260 200 250 360 280 160 120 140 20 657 607 368 510 190 24 896 83 785
100x65-250 90 280S/M 100 65 125 260 200 250 360 280 160 120 140 20 657 607 368 510 190 24 896 83 785
100x65-315 55 250S/M 100 65 125 280 225 280 400 315 160 120 140 20 616 566 311 391 168 24 783 82 608
100x65-315 75 280S/M 100 65 125 280 225 280 400 315 160 120 140 20 657 607 368 510 190 24 896 83 823
100x65-315 90 280S/M 100 65 125 280 225 280 400 315 160 120 140 20 657 607 368 510 190 24 896 83 823
100x65-315 110 315S/M 100 65 125 280 225 280 400 315 160 120 140 20 758 708 406 558 216 28 986 85 1533
100x65-315 132 315S/M 100 65 125 280 225 280 400 315 160 120 140 20 758 708 406 558 216 28 986 85 1533
125x100-200 30 200L 125 100 125 230 200 280 360 280 160 120 140 20 385 318 305 370 133 18 657 78 338
125x100-200 37 200L 125 100 125 230 200 280 360 280 160 120 140 20 385 318 305 370 133 18 657 78 338
125x100-200 45 225S/M 125 100 125 230 200 280 360 280 160 120 140 20 566 516 286 391 149 18 707 82 496
125x100-200 55 250S/M 125 100 125 260 200 280 360 280 160 120 140 20 616 566 311 391 168 24 783 82 575
125x100-200 75 280S/M 125 100 125 260 200 280 360 280 160 120 140 20 657 607 368 510 190 24 896 83 790
125x100-200 90 280S/M 125 100 125 260 200 280 360 280 160 120 140 20 657 607 368 510 190 24 896 83 790
125x100-250 45 225S/M 125 100 140 250 225 280 400 315 160 120 140 20 436 356 286 391 149 18 707 82 537
125x100-250 55 250S/M 125 100 140 280 225 280 400 315 160 120 140 20 616 566 311 391 168 24 783 82 616
125x100-250 75 280S/M 125 100 140 280 225 280 400 315 160 120 140 20 657 607 368 510 190 24 896 83 831
125x100-250 90 280S/M 125 100 140 280 225 280 400 315 160 120 140 20 657 607 368 510 190 24 896 83 831
125x100-250 110 315S/M 125 100 140 280 225 280 400 315 160 120 140 20 758 708 406 558 216 28 986 85 1541
125x100-315 75 280S/M 125 100 140 280 250 315 400 315 160 120 140 20 657 607 368 510 190 24 896 83 840
125x100-315 90 280S/M 125 100 140 280 250 315 400 315 160 120 140 20 657 607 368 510 190 24 896 83 840
125x100-315 110 315S/M 125 100 140 280 250 315 400 315 160 120 140 20 758 708 406 558 216 28 986 85 1550
125x100-315 132 315S/M 125 100 140 280 250 315 400 315 160 120 140 20 758 708 406 558 216 28 986 85 1550
125x100-315 160 315S/M 125 100 140 280 250 315 400 315 160 120 140 20 758 708 406 558 216 28 986 85 1550 125x100-315 200 315S/M 125 100 140 280 250 315 400 315 160 120 140 20 758 708 406 558 216 28 986 96 1550
M1
M2
LmF1A
H1
H2
B1
B2
B
BB
C B4
B3
4 HOLES S1Ø
4 HOLES S2Ø
Actual motor length may varydepending on motor make supplied
WWITHDRAWAL
APEXPUMPS
70
ISF close-coupled pump dimensions
4-Pole Pumps Pump Motor Motor Flanges Pump dimensions Motor Dimensions Estimated
Model kW Frame In out A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 B BB C S2 Lm dB (A) kg
50x32-160 0.55 80 50 32 80 200 132 160 240 190 100 70 100 14 207 189 100 126 50 10 236 47 52
50x32-160 0.75 80 50 32 80 200 132 160 240 190 100 70 100 14 207 189 100 126 50 10 236 47 53
50x32-160 1.1 90S 50 32 80 200 132 160 240 190 100 70 100 14 222 204 100 131 56 10 254 50 58
50x32-200 0.55 80 50 32 80 200 160 180 240 190 100 70 100 14 207 189 100 126 50 10 236 47 60
50x32-200 0.75 80 50 32 80 200 160 180 240 190 100 70 100 14 207 189 100 126 50 10 236 47 61
50x32-200 1.1 90S 50 32 80 200 160 180 240 190 100 70 100 14 222 204 100 131 56 10 254 50 66
50x32-200 1.5 90L 50 32 80 200 160 180 240 190 100 70 100 14 222 204 125 156 56 10 279 50 69
65x50-160 0.55 80 65 50 80 200 132 160 240 190 100 70 100 14 207 189 100 126 50 10 236 47 54
65x50-160 0.75 80 65 50 80 200 132 160 240 190 100 70 100 14 207 189 100 126 50 10 236 47 55
65x50-160 1.1 90S 65 50 80 200 132 160 240 190 100 70 100 14 222 204 100 131 56 10 254 50 60
65x50-160 1.5 90L 65 50 80 200 132 160 240 190 100 70 100 14 222 204 125 156 56 10 279 50 63
65x40-200 0.75 80 65 40 100 200 160 180 265 212 100 70 100 14 207 189 100 126 50 10 236 47 63
65x40-200 1.1 90S 65 40 100 200 160 180 265 212 100 70 100 14 222 204 100 131 56 10 254 50 68
65x40-200 1.5 90L 65 40 100 200 160 180 265 212 100 70 100 14 222 204 125 156 56 10 279 50 71
65x40-200 2.2 100L 65 40 100 200 160 180 265 212 100 70 100 14 267 244 140 173 63 12 316 54 79
65x40-200 3 100L 65 40 100 200 160 180 265 212 100 70 100 14 267 244 140 173 63 12 316 54 82
65x40-250 1.5 90L 65 40 100 200 180 225 320 250 125 95 100 14 222 204 125 156 56 10 279 50 93
65x40-250 2.2 100L 65 40 100 200 180 225 320 250 125 95 100 14 267 244 140 173 63 12 316 54 101
65x40-250 3 100L 65 40 100 200 180 225 320 250 125 95 100 14 267 244 140 173 63 12 316 54 104
65x40-250 4 112M 65 40 100 200 180 225 320 250 125 95 100 14 297 274 140 177 70 12 333 58 116
65x40-250 5.5 132S 65 40 100 200 180 225 320 250 125 95 100 14 323 300 140 187 89 12 372 61 130
65x40-315 2.2 100L 65 40 125 200 200 250 345 280 125 95 100 14 267 244 140 173 63 12 316 54 111
65x40-315 3 100L 65 40 125 200 200 250 345 280 125 95 100 14 267 244 140 173 63 12 316 54 114
65x40-315 4 112M 65 40 125 200 200 250 345 280 125 95 100 14 297 274 140 177 70 12 333 58 126
65x40-315 5.5 132S 65 40 125 200 200 250 345 280 125 95 100 14 323 300 140 187 89 12 372 61 140
65x40-315 7.5 132M 65 40 125 200 200 250 345 280 125 95 100 14 323 300 178 225 89 12 410 61 147
M1
M2
LmF1A
H1
H2
B1
B2
B
BB
C B4
B3
4 HOLES S1Ø
4 HOLES S2Ø
Actual motor length may varydepending on motor make supplied
WWITHDRAWAL
APEXPUMPS
71
ISF close-coupled pump dimensions
4-Pole Pumps Pump Motor Motor Flanges Pump dimensions Motor Dimensions Estimated Model kW Frame In out A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 B BB C S2 Lm dB (A) kg
80x65-160 0.75 80 80 65 100 200 160 180 265 212 100 70 100 14 207 189 100 126 50 10 236 47 61 80x65-160 1.1 90S 80 65 100 200 160 180 265 212 100 70 100 14 222 204 100 131 56 10 254 50 66 80x65-160 1.5 90L 80 65 100 200 160 180 265 212 100 70 100 14 222 204 125 156 56 10 279 50 69 80x65-160 2.2 100L 80 65 100 200 160 180 265 212 100 70 100 14 267 244 140 173 63 12 316 54 77 80x65-160 3 100L 80 65 100 200 160 180 265 212 100 70 100 14 267 244 140 173 63 12 316 54 80
80x50-200 1.5 90L 80 50 100 200 160 200 265 212 100 70 100 14 222 204 125 156 56 10 279 50 75 80x50-200 2.2 100L 80 50 100 200 160 200 265 212 100 70 100 14 267 244 140 173 63 12 316 54 83 80x50-200 3 100L 80 50 100 200 160 200 265 212 100 70 100 14 267 244 140 173 63 12 316 54 86 80x50-200 4 112M 80 50 100 200 160 200 265 212 100 70 100 14 297 274 140 177 70 12 333 58 98 80x50-200 5.5 132S 80 50 100 200 160 200 265 212 100 70 100 14 323 300 140 187 89 12 372 61 112
80x50-250 3 100L 80 50 125 200 180 225 320 250 125 95 100 14 267 244 140 173 63 12 316 54 106 80x50-250 4 112M 80 50 125 200 180 225 320 250 125 95 100 14 297 274 140 177 70 12 333 58 118 80x50-250 5.5 132S 80 50 125 200 180 225 320 250 125 95 100 14 323 300 140 187 89 12 372 61 132 80x50-250 7.5 132M 80 50 125 200 180 225 320 250 125 95 100 14 323 300 178 225 89 12 410 61 139 80x50-250 11 160M 80 50 125 230 180 225 320 250 125 95 100 14 384 354 210 254 108 14 488 65 177
80x50-315 4 112M 80 50 125 200 225 280 345 280 125 95 100 14 297 274 140 177 70 12 333 58 133 80x50-315 5.5 132S 80 50 125 200 225 280 345 280 125 95 100 14 323 300 140 187 89 12 372 61 147 80x50-315 7.5 132M 80 50 125 200 225 280 345 280 125 95 100 14 323 300 178 225 89 12 410 61 154 80x50-315 11 160M 80 50 125 230 225 280 345 280 125 95 100 14 384 354 210 254 108 14 488 65 192
100x80-160 1.1 90S 100 80 100 200 160 200 280 212 125 95 100 14 222 204 100 131 56 10 254 50 88 100x80-160 1.5 90L 100 80 100 200 160 200 280 212 125 95 100 14 222 204 125 156 56 10 279 50 91 100x80-160 2.2 100L 100 80 100 200 160 200 280 212 125 95 100 14 267 244 140 173 63 12 316 54 99 100x80-160 3 100L 100 80 100 200 160 200 280 212 125 95 100 14 267 244 140 173 63 12 316 54 102 100x80-160 4 112M 100 80 100 200 160 200 280 212 125 95 100 14 297 274 140 177 70 12 333 58 114 100x80-160 5.5 132S 100 80 100 200 160 200 280 212 125 95 100 14 323 300 140 187 89 12 372 61 128
100x65-200 3 100L 100 65 100 200 180 225 320 250 125 95 140 14 267 244 140 173 63 12 316 54 104 100x65-200 4 112M 100 65 100 200 180 225 320 250 125 95 140 14 297 274 140 177 70 12 333 58 116 100x65-200 5.5 132S 100 65 100 200 180 225 320 250 125 95 140 14 323 300 140 187 89 12 372 61 130 100x65-200 7.5 132M 100 65 100 200 180 225 320 250 125 95 140 14 323 300 178 225 89 12 410 61 137 100x65-200 11 160M 100 65 100 230 180 225 320 250 125 95 140 14 384 354 210 254 108 14 488 65 175
M1
M2
LmF1A
H1
H2
B1
B2
B
BB
C B4
B3
4 HOLES S1Ø
4 HOLES S2Ø
Actual motor length may varydepending on motor make supplied
WWITHDRAWAL
APEXPUMPS
72
ISF close-coupled pump dimensions
4-Pole Pumps Pump Motor Motor Flanges Pump dimensions Motor Dimensions Estimated Model kW Frame In out A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 B BB C S2 Lm dB (A) kg
100x65-250 4 112M 100 65 125 200 200 250 360 280 160 120 140 20 297 274 140 177 70 12 333 58 126 100x65-250 5.5 132S 100 65 125 200 200 250 360 280 160 120 140 20 323 300 140 187 89 12 372 61 140 100x65-250 7.5 132M 100 65 125 200 200 250 360 280 160 120 140 20 323 300 178 225 89 12 410 61 147 100x65-250 11 160M 100 65 125 230 200 250 360 280 160 120 140 20 384 354 210 254 108 14 488 65 185 100x65-250 15 160L 100 65 125 230 200 250 360 280 160 120 140 20 384 354 254 298 108 14 532 65 201
100x65-315 7.5 132M 100 65 125 220 225 280 400 315 160 120 140 20 323 300 178 225 89 12 410 61 185 100x65-315 11 160M 100 65 125 250 225 280 400 315 160 120 140 20 384 354 210 254 108 14 488 65 223 100x65-315 15 160L 100 65 125 250 225 280 400 315 160 120 140 20 384 354 254 298 108 14 532 65 239 100x65-315 18.5 180M 100 65 125 250 225 280 400 315 160 120 140 20 437 397 241 294 121 14 554 67 278 100x65-315 22 180L 100 65 125 250 225 280 400 315 160 120 140 20 437 397 279 332 121 14 592 67 301
125x80-400 15 160L 125 80 125 250 280 355 435 355 160 120 140 20 384 354 254 298 108 14 532 65 286 125x80-400 18.5 180M 125 80 125 250 280 355 435 355 160 120 140 20 437 397 241 294 121 14 554 67 325 125x80-400 22 180L 125 80 125 250 280 355 435 355 160 120 140 20 437 397 279 332 121 14 592 67 348 125x80-400 30 200L 125 80 125 250 280 355 435 355 160 120 140 20 528 478 305 370 133 18 657 70 398 125x80-400 37 225S/M 125 80 125 280 280 355 435 355 160 120 140 20 566 516 311 391 149 18 707 73 515
125x100-200 4 112M 125 100 125 200 200 280 360 280 160 120 140 20 297 274 140 177 70 12 333 58 131 125x100-200 5.5 132S 125 100 125 200 200 280 360 280 160 120 140 20 323 300 140 187 89 12 372 61 145 125x100-200 7.5 132M 125 100 125 200 200 280 360 280 160 120 140 20 323 300 178 225 89 12 410 61 152 125x100-200 11 160M 125 100 125 230 200 280 360 280 160 120 140 20 384 354 210 254 108 14 488 65 190 125x100-200 15 160L 125 100 125 230 200 280 360 280 160 120 140 20 384 354 254 298 108 14 532 65 206
125x100-250 7.5 132M 125 100 140 220 225 280 400 315 160 120 140 20 323 300 178 225 89 12 410 61 193 125x100-250 11 160M 125 100 140 250 225 280 400 315 160 120 140 20 384 354 210 254 108 14 488 65 231 125x100-250 15 160L 125 100 140 250 225 280 400 315 160 120 140 20 384 354 254 298 108 14 532 65 247 125x100-250 18.5 180M 125 100 140 250 225 280 400 315 160 120 140 20 437 397 241 294 121 14 554 67 286 125x100-250 22 180L 125 100 140 250 225 280 400 315 160 120 140 20 437 397 279 332 121 14 592 67 309
125x100-315 11 160M 125 100 140 250 250 315 400 315 160 120 140 20 384 354 210 254 108 14 488 65 240 125x100-315 15 160L 125 100 140 250 250 315 400 315 160 120 140 20 384 354 254 298 108 14 532 65 256 125x100-315 18.5 180M 125 100 140 250 250 315 400 315 160 120 140 20 437 397 241 294 121 14 554 67 295 125x100-315 22 180L 125 100 140 250 250 315 400 315 160 120 140 20 437 397 279 332 121 14 592 67 318 125x100-315 30 200L 125 100 140 250 250 315 400 315 160 120 140 20 528 478 305 370 133 18 657 70 368
M1
M2
LmF1A
H1
H2
B1
B2
B
BB
C B4
B3
4 HOLES S1Ø
4 HOLES S2Ø
Actual motor length may varydepending on motor make supplied
WWITHDRAWAL
APEXPUMPS
73
ISF close-coupled pump dimensions
4-Pole Pumps Pump Motor Motor Flanges Pump dimensions Motor Dimensions Estimated Model kW Frame In out A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 B BB C S2 Lm dB (A) kg
125x100-400 22 180L 125 100 140 250 280 355 500 400 200 150 140 24 437 397 279 332 121 14 592 67 358 125x100-400 30 200L 125 100 140 250 280 355 500 400 200 150 140 24 528 478 305 370 133 18 657 70 408 125x100-400 37 225S/M 125 100 140 280 280 355 500 400 200 150 140 24 566 516 311 391 149 18 707 73 525 125x100-400 45 225S/M 125 100 140 280 280 355 500 400 200 150 140 24 566 516 311 391 149 18 707 73 557 125x100-400 55 250S/M 125 100 140 280 280 355 500 400 200 150 140 24 566 516 349 449 168 18 783 73 635 125x100-400 75 280S/M 125 100 140 280 280 355 500 400 200 150 140 24 557 457 419 510 190 24 896 77 910
125x100-500 45 225S/M 125 100 160 340 355 450 550 450 200 150 140 24 566 516 311 391 149 18 707 73 695 125x100-500 55 250S/M 125 100 160 340 355 450 550 450 200 150 140 24 566 516 349 449 168 18 783 73 773 125x100-500 75 280S/M 125 100 160 340 355 450 550 450 200 150 140 24 687 637 419 510 190 24 896 77 1048 125x100-500 90 280S/M 125 100 160 340 355 450 550 450 200 150 140 24 687 637 419 510 190 24 896 77 1115 125x100-500 110 315S/M 125 100 160 340 355 450 550 450 200 150 140 24 758 708 457 558 216 28 986 80 1178
150x125-250 11 160M 150 125 140 250 250 355 400 315 160 120 140 20 384 354 210 254 108 14 488 65 245 150x125-250 15 160L 150 125 140 250 250 355 400 315 160 120 140 20 384 354 254 298 108 14 532 65 261 150x125-250 18.5 180M 150 125 140 250 250 355 400 315 160 120 140 20 437 397 241 294 121 14 554 67 300 150x125-250 22 180L 150 125 140 250 250 355 400 315 160 120 140 20 437 397 279 332 121 14 592 67 323 150x125-250 30 200L 150 125 140 250 250 355 400 315 160 120 140 20 528 478 305 370 133 18 657 70 373
150x125-315 15 160L 150 125 140 250 280 355 500 400 200 150 140 24 384 354 254 298 108 14 532 65 271 150x125-315 18.5 180M 150 125 140 250 280 355 500 400 200 150 140 24 437 397 241 294 121 14 554 67 310 150x125-315 22 180L 150 125 140 250 280 355 500 400 200 150 140 24 437 397 279 332 121 14 592 67 333 150x125-315 30 200L 150 125 140 250 280 355 500 400 200 150 140 24 528 478 305 370 133 18 657 70 383 150x125-315 37 225S/M 150 125 140 280 280 355 500 400 200 150 140 24 566 516 311 391 149 18 707 73 500 150x125-315 45 225S/M 150 125 140 280 280 355 500 400 200 150 140 24 566 516 311 391 149 18 707 73 532 150x125-315 55 250S/M 150 125 140 280 280 355 500 400 200 150 140 24 566 516 349 449 168 18 783 73 610
150x125-400 37 225S/M 150 125 140 280 315 400 500 400 200 150 140 24 566 516 311 391 149 18 707 73 536 150x125-400 45 225S/M 150 125 140 280 315 400 500 400 200 150 140 24 566 516 311 391 149 18 707 73 568 150x125-400 55 250S/M 150 125 140 280 315 400 500 400 200 150 140 24 566 516 349 449 168 18 783 73 646 150x125-400 75 280S/M 150 125 140 280 315 400 500 400 200 150 140 24 687 637 419 510 190 24 896 77 921 150x125-400 90 280S/M 150 125 140 280 315 400 500 400 200 150 140 24 687 637 419 510 190 24 896 77 988
150x125-500 75 280S/M 150 125 160 340 355 450 550 450 200 150 140 24 687 637 419 510 190 24 896 77 1071 150x125-500 90 280S/M 150 125 160 340 355 450 550 450 200 150 140 24 687 637 419 510 190 24 896 77 1138 150x125-500 110 315S/M 150 125 160 340 355 450 550 450 200 150 140 24 758 708 457 558 216 28 986 80 1201 150x125-500 132 315S/M 150 125 160 340 355 450 550 450 200 150 140 24 758 708 457 558 216 28 986 80 1346 150x125-500 160 315S/M 150 125 160 340 355 450 550 450 200 150 140 24 758 708 457 558 216 28 986 80 1346
M1
M2
LmF1A
H1
H2
B1
B2
B
BB
C B4
B3
4 HOLES S1Ø
4 HOLES S2Ø
Actual motor length may varydepending on motor make supplied
WWITHDRAWAL
APEXPUMPS
74
ISF close-coupled pump dimensions
4-Pole Pumps Pump Motor Motor Flanges Pump dimensions Motor Dimensions Estimated
Model kW Frame In out A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 B BB C S2 Lm dB (A) kg
200x150-315 30 200L 200 150 160 310 315 400 550 450 200 150 180 24 528 478 305 370 133 18 657 70 455
200x150-315 37 225S/M 200 150 160 340 315 400 550 450 200 150 180 24 566 516 311 391 149 18 707 73 572
200x150-315 45 225S/M 200 150 160 340 315 400 550 450 200 150 180 24 566 516 311 391 149 18 707 73 604
200x150-315 55 250S/M 200 150 160 340 315 400 550 450 200 150 180 24 566 516 349 449 168 18 783 73 682
200x150-315 75 280S/M 200 150 160 340 315 400 550 450 200 150 180 24 687 637 419 510 190 24 896 77 957
200x150-315 90 280S/M 200 150 160 340 315 400 550 450 200 150 180 24 687 637 419 510 190 24 896 77 1024
200x150-400 45 225S/M 200 150 160 340 315 450 550 450 200 150 180 24 566 516 311 391 149 18 707 73 682
200x150-400 55 250S/M 200 150 160 340 315 450 550 450 200 150 180 24 566 516 349 449 168 18 783 73 760
200x150-400 75 280S/M 200 150 160 340 315 450 550 450 200 150 180 24 687 637 419 510 190 24 896 77 1035
200x150-400 90 280S/M 200 150 160 340 315 450 550 450 200 150 180 24 687 637 419 510 190 24 896 77 1102
200x150-400 110 315S/M 200 150 160 340 315 450 550 450 200 150 180 24 628 508 457 558 216 28 986 80 1165
200x150-400 132 315S/M 200 150 160 340 315 450 550 450 200 150 180 24 628 508 457 558 216 28 986 80 1310
200x150-500 90 280S/M 200 150 160 340 400 500 550 450 200 150 180 24 687 637 419 510 190 24 896 77 1184
200x150-500 110 315S/M 200 150 160 340 400 500 550 450 200 150 180 24 758 708 457 558 216 28 986 80 1247
200x150-500 132 315S/M 200 150 160 340 400 500 550 450 200 150 180 24 758 708 457 558 216 28 986 80 1392
200x150-500 160 315S/M 200 150 160 340 400 500 550 450 200 150 180 24 758 708 457 558 216 28 986 80 1392
250x200-315 37 225S/M 250 200 180 340 315 450 550 450 200 150 180 24 566 516 311 391 149 18 707 73 627
250x200-315 45 225S/M 250 200 180 340 315 450 550 450 200 150 180 24 566 516 311 391 149 18 707 73 659
250x200-315 55 250S/M 250 200 180 340 315 450 550 450 200 150 180 24 566 516 349 449 168 18 783 73 737
250x200-315 75 280S/M 250 200 180 340 315 450 550 450 200 150 180 24 687 637 419 510 190 24 896 77 1012
250x200-315 90 280S/M 250 200 180 340 315 450 550 450 200 150 180 24 687 637 419 510 190 24 896 77 1079
250x200-315 110 315S/M 250 200 180 340 315 450 550 450 200 150 180 24 628 508 457 558 216 28 986 80 1142
250x200-400 75 280S/M 250 200 180 340 355 500 550 450 200 150 180 24 687 637 419 510 190 24 896 77 1075
250x200-400 90 280S/M 250 200 180 340 355 500 550 450 200 150 180 24 687 637 419 510 190 24 896 77 1142
250x200-400 110 315S/M 250 200 180 340 355 500 550 450 200 150 180 24 758 708 457 558 216 28 986 80 1205
250x200-400 132 315S/M 250 200 180 340 355 500 550 450 200 150 180 24 758 708 457 558 216 28 986 80 1350
250x200-400 160 315S/M 250 200 180 340 355 500 550 450 200 150 180 24 758 708 457 558 216 28 986 80 1350
M1
M2
LmF1A
H1
H2
B1
B2
B
BB
C B4
B3
4 HOLES S1Ø
4 HOLES S2Ø
Actual motor length may varydepending on motor make supplied
WWITHDRAWAL
APEXPUMPS
75
APEXPUMPS
76
Apex Pumps Division of Apex Fluid Engineering Ltd
Morley Road, Staple Hill,
Bristol BS16 4QT United Kingdom.
Tel: 0117 907 7555 Fax: 0117 907 7556
International telephone: +44 117 907 7555 International facsimile +44 117 907 7556
email: [email protected]
www.apexpumps.com
APEXPUMPS