networking chapter 5
DESCRIPTION
TRANSCRIPT
![Page 1: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/1.jpg)
Modern Ethernet
Chapter 5
![Page 2: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/2.jpg)
ObjectivesObjectives• Describe the varieties of 100-megabit
Ethernet• Discuss copper- and fiber-based Gigabit
Ethernet• Compare the competing varieties of 10-
Gigabit Ethernet
![Page 3: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/3.jpg)
OverviewOverview
![Page 4: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/4.jpg)
Three Parts to Chapter 5Three Parts to Chapter 5
• 100-megabit Ethernet standards• Gigabit Ethernet standards• 10-Gigabit Ethernet standards
![Page 5: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/5.jpg)
Ethernet FactsEthernet Facts• There are only four Ethernet speeds: 10 mega-
bit, 100 megabit, 1 gigabit, and 10 gigabit• Every version of Ethernet uses either unshield-
ed twisted pair (UTP) or fiber-optic. (With a few, rare exceptions)
• Every version of Ethernet uses a hub or switch, although hubs are incredibly rare today.
![Page 6: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/6.jpg)
Ethernet Facts (continued)Ethernet Facts (continued)• Only 10- and 100-megabit Ethernet may use a
hub. Gigabit and 10-Gigabit Ethernet networks must use a switch.
• Every version of Ethernet has a limit of 1024 nodes.
• Every UTP version of Ethernet has a maximum distance from the switch or hub to the node of 100 meters.
![Page 7: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/7.jpg)
100-Megabit Ethernet100-Megabit Ethernet
![Page 8: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/8.jpg)
• 100BaseT– 100BaseT4
• CAT 3 or better cabling• Uses all four pair of wires• Disappeared from the market after 100BaseTX
generally accepted– 100BaseTX
• Dominant 100-megabit standard by the late 1990s• The term “100BaseT” now applies to this standard
![Page 9: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/9.jpg)
• 100BaseTX Summary– Speed: 100 Mbps
– Signal type: Baseband
– Distance: 100 meters between the hub and the node
– Node limit: No more than 1,024 nodes per hub
– Topology: Star bus topology: physical star, logical bus
– Cable type: Uses CAT5(e) or better UTP cabling with RJ-45 connectors
![Page 10: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/10.jpg)
• Upgrading 10BaseT network to 100BaseT– CAT 5 cable or better– Replace all old 10BaseT NICs with 100BaseT NICs– Replace 10BaseT hubs or switches with 100BaseT
hubs or switches– Multispeed, auto-sending NICs and
hubs/switches ease the upgrade
![Page 11: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/11.jpg)
• Multispeed, autosensing NIC– When first connected, it negotiates automatically
with the hub or switch– If both do 100BaseT, they will use that mode– If the hub/switch only does 10BaseT, NIC does
10BaseT
![Page 12: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/12.jpg)
Figure 5.1 Typical 100BaseT NIC
![Page 13: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/13.jpg)
Figure 5.2 Auto-negotiation in action
![Page 14: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/14.jpg)
• Distinguishing 10BaseT NIC from 100BaseT NIC– Inspect closely– Look for something indicating the card’s speed– All modern NICs are multispeed and auto-sensing
![Page 15: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/15.jpg)
Figure 5.3 Typical 100BaseT NIC in Vista
![Page 16: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/16.jpg)
• 100BaseFX– UTP versus fiber-optic
• UTP cannot meet the needs of every organization– 100-meter distance limit inadequate for
large buildings and campuses– Lack of electrical shielding– Easy to tap
– Fast Ethernet refers to all the 100-Mbps Ethernet standards
![Page 17: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/17.jpg)
• 100BaseFX Summary– Speed: 100 Mbps– Signal type: Baseband– Distance: Two kilometers between hub and
node– Node limit: No more than 1,024 nodes per hub– Topology: Star bus topology: physical star,
logical bus– Cable type: Uses multimode fiber cabling with
ST or SC connectors
![Page 18: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/18.jpg)
• Full-Duplex Ethernet– Early 100BaseT NICs were half-duplex
• Could both send and receive data• But not at the same time
– IEEE added full-duplex to the standard• Device sends and receives at the same time• By late 1990s, most 100BaseT cards could auto-negotiate for
full-duplex
– NIC and hub/switch determine full-or-half duplex
– Setting can be forced through the operating system
![Page 19: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/19.jpg)
Figure 5.4 Half-duplex; sending at the top, receiving at the bottom
![Page 20: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/20.jpg)
Figure 5.5 Full-duplex
![Page 21: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/21.jpg)
Figure 5.6 Forcing speed and duplex in Windows Vista
![Page 22: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/22.jpg)
Gigabit EthernetGigabit Ethernet
![Page 23: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/23.jpg)
• IEEE 802.3ab called 1000BaseT– Most dominant Gigabit Ethernet
– Four-pair UTP
– Maximum cable length 100 meters
– Connectors and ports look exactly like 10BaseT, 100BaseT
![Page 24: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/24.jpg)
• IEEE 802.3z known as 1000BaseX– 1000BaseCX
• Twinaxial cable– Shielded 150-Ohm– Maximum length of 25 meters
• This standard made little progress
![Page 25: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/25.jpg)
Figure 5.7 Twinaxial cable
![Page 26: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/26.jpg)
• IEEE 802.3z (continued)– 1000BaseSX
• More common• Multimode fiber-optic cable• Maximum cable length 200 to 500 meters,
depending on manufacturer• Uses 850-nm wavelength LED • Devices look exactly like 100BaseFX products• SC is the most common type of connection
![Page 27: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/27.jpg)
• IEEE 802.3z (continued)– 1000BaseLX
• Long distance carrier• Single-mode (laser) cables• Maximum cable length 5 kilometers• Special repeaters increase distance to 70
kilometers!• Positioned as the Ethernet backbone of the future• Connectors look like 100BaseSX connectors
![Page 28: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/28.jpg)
• New Fiber Connectors– Problems with ST and SC connectors
• ST connectors are large, twist-on• Installer must twist cable—danger of fracturing
fibers• Techs have trouble getting fingers around closely
packed connectors• SC connectors snap in and out, but are also large• Manufacturers wanted smaller connectors for more
ports
![Page 29: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/29.jpg)
• New Fiber Connectors (continued)– Solution: Small Form Factor (SFF)
connectors• Mechanical Transfer Registered Jack (MT-RJ)• Local Connector (LC)
– Very popular – Considered the predominant fiber connector
• Other fiber connectors exist• Only standards are ST and SC• Manufacturers have different connectors
![Page 30: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/30.jpg)
Figure 5.8 MT-RJ connector
![Page 31: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/31.jpg)
Figure 5.9 LC-type connector
![Page 32: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/32.jpg)
Gigabit Ethernet Summary
Standard Cabling Cable Details Connectors Length
1000BaseCX Copper Twinax Twinax 25 m
1000BaseSX Multimode 850 nm Variable – 220 – 500 mfiber SC is
common
1000BaseLX Single- 1,300 nm Variable – 5 kmmode fiber LC, SC are
common
1000BaseT CAT 5e/6 Four-pair / RJ-45 100 mUTP full-duplex
Table 5.1
![Page 33: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/33.jpg)
10-Gigabit Ethernet10-Gigabit Ethernet
![Page 34: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/34.jpg)
• Introduction to 10-Gigabit Ethernet (10-GbE)– Showing up in high-level LANs– Expected to trickle down to the desktops
in near future– New technology– Large number of fiber standards– Two copper standards– 10-GbE copper product available only
since 2008
![Page 35: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/35.jpg)
• Fiber-base 10-GbE– IEEE challenge
• Maintain the integrity of Ethernet frame• How to transfer frames at high speeds
– Could use traditional Ethernet Physical layer mechanisms
– Already a usable ~10 GbE fiber network (SONET) used for WANs
![Page 36: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/36.jpg)
• Fiber-base 10 GbE (continued)– IEEE Actions
• A set of 10GbE standards using traditional LAN Physical-layer mechanisms
• A set of 10 GbE standards using SONET infrastructure over WAN fiber
• Recognized need for different networking situations
![Page 37: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/37.jpg)
• IEEE created several standards defined by– The type of fiber used– The wavelength of the laser or lasers– The Physical layer signaling type– Maximum signal distance (defined by
previous factors)
![Page 38: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/38.jpg)
• Naming convention begins with 10GBasexy– x = type of fiber (usually) and the signal
wavelength – y = Physical layer signaling standard
• R for LAN-based signaling• W for SONET/WAN-based signaling
![Page 39: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/39.jpg)
Standard Fiber Type Wavelength Physical Layer Signaling
Maximum Signal Length
10GBaseSR Multimode 850 nm LAN 26-300 m
10GBaseSW Multimode 850 nm SONET/WAN 26-300 m
• 10GBaseSy uses a short-wavelength (850 nm) signal over multimode
Fiber-based 10GBaseSy Summary
![Page 40: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/40.jpg)
Figure 5.10 A 10GBaseSR NIC (photo courtesy of Intel Corporation)
![Page 41: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/41.jpg)
Standard Fiber Type Wavelength Physical Layer Signaling
Maximum Signal Length
10GBaseLR Single-mode 1310 nm LAN 10 km
10GBaseLW Single-mode 1310 nm SONET/WAN 10 km
• 10GBaseLy uses a long-wavelength (1310 nm) signal over single-mode
Fiber-based 10GBaseLy Summary
![Page 42: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/42.jpg)
Standard Fiber Type Wavelength Physical Layer Signaling
Maximum Signal Length
10GBaseER Single-mode 1550nm LAN 40 km
10GBaseEW Single-mode 1550 nm SONET/WAN 40 km
• 10GBaseEy uses an extra-long-wave-length (1550 nm) signal over single-mode fiber
Fiber-based 10GBaseEy Summary
![Page 43: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/43.jpg)
• 10 GbE connectors– Standards do not define the type of
connector– Manufacturers determine connectors
![Page 44: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/44.jpg)
• Copper-based 10GbE (10GBaseT)– 2006: IEEE standard for 10GbE running on
UTP– Looks and works like slower versions of
UTP Ethernet– Downside: 10GBaseT running on CAT 6
has maximum cable length of only 55 meters
– 10GBaseT running on CAT 6a can to go to 100 meters
![Page 45: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/45.jpg)
10-GbE Summary
Wavelength /Standard Cabling Cable Details Connectors Length
10GBaseSR Multimode 850 nm Not defined 26 – 300 m/SW fiber
10GBaseLR Single- 1310 nm Variable – LC 10 km/LW mode fiber is common
10GBaseER Single- 1550 nm Variable – LC, 40 kmmode fiber SC are
common
10GBaseT CAT 6/6a Four-pair / RJ-45 55 – 100 mUTP full-duplex
Table 5.2
![Page 46: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/46.jpg)
• 10-GbE Physical Connections– Hodgepodge of 10-GbE types– Problem: single router may need to support
several connector types– Solution: multisource agreement (MSA)
• Modular transceiver plugs into10-GbE equipment• Converts between media types• Many competing media types recently
– 10-GbE equipment exclusive domain of high-bandwidth LANs and WANs, including the Internet
![Page 47: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/47.jpg)
Figure 5.11 XENPAK MSA
![Page 48: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/48.jpg)
• Backbones– Multispeed network works best for many
situations
– Series of high-speed switches create a backbone
• No computers (except maybe servers) on the backbone
• Each floor has its own switch connecting to every node on floor
• Each floor switch has a separate high-speed connection to a main switch
![Page 49: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/49.jpg)
Figure 5.12 Typical network configuration showing backbone
![Page 50: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/50.jpg)
Figure 5.13 Switches with dedicated, high-speed add-on ports
![Page 51: Networking Chapter 5](https://reader034.vdocuments.mx/reader034/viewer/2022051323/54b74ed44a795967588b45d5/html5/thumbnails/51.jpg)
• Know Your Ethernets!– Know details of the Ethernet versions– Use summaries and tables– So far in the text, only the functions of a
basic switch have been explained– More to see in terms of capabilities of
switches