A common question asked of a Dynabrade salesman bydistributor management is “What’s new at Dynabrade thesedays?” The industry has come to expect a regular stream ofnew and innovative products from Dynabrade over the past42 years. And compared to many othermanufacturers fighting for attention fromdistribution, Dynabrade is able to get good“one-on-one” time because of ouruniqueness and ability to bring new productsto market every year, through our reliableand talented sales force!

Calendar years 2009 and 2010 are noexceptions to the rule when it comes to new products. We allknow how horrible the economy was in 2009, and the slowrecovery we are currently experiencing. It’s no secret that to

weather these bad economic conditions, our costs had to bereduced and we needed to sell more products. It’s not easy tosell in a bad economy, but new products help bridge the gapand are a sure bet to get the attention of the marketplace!

Dynabrade has successfully introduced avariety of new products in the past 15months. There are not too many companiesthat can match this pace of new products –particularly in a year when most companiesexperienced double-digit reductions in salesrevenue.

A wide range of new products highlightedthe past 15 months. The introduction of the new “D3”Random Orbital Sander program has been a huge success!Not only were the Supreme and Spirit sanders enhanced, but

NEW PRODUCTS ARE THE TRUE“DYNABRADE DIFFERENCE!”

“LINKING COMPANY NEWS TO EMPLOYEES” WWW.DYNABRADE.COM MAY 2010“LINKING COMPANY NEWS TO EMPLOYEES” WWW.DYNABRADE.COM MAY 2010

(article continued on back page)

LATEST PRODUCT INTRODUVacuum Disc Sanders

Available in 2", 3" and 5" diameters, in7º Offset and Right Angle configurations.

Introduced 12/1/2008

Pencil FilerLightweight tool ideal for precision

deburring and finishing.

Introduced 12/1/2008

Central VacuumPencil Grinder

Available in speeds of 35,000, 50,000and 60,000 RPM.

Introduced 1/29/2009

SuperFinisherFor achieving predictable, consistent

and repeatable finishes.

Introduced 1/29/2009

Reorder No. D08.16

Vacuum Disc SanderFamily from DynabradeHigh-Quality Sanders Capture Dust and Contaminants

• 2", 3" & 5" Dia. Models(51 mm, 76 mm & 127 mm)

• Unique Vacuum Shroud DivertsDust & Debris to Vacuum Source

• Captures Contaminantssuch as HexavalentChromium

Reorder No. D08.17

• Rapid Reciprocating Actionand Short Stroke Length

• Accepts Wide Varietyof Reciprocating Files

• Ideal for Intricate Removalon Delicate Work Pieces

Pencil Filerfrom DynabradeLightweight Tool for Precision Deburring and Finishing

Reorder No. D09.02

Dynabrade CentralVacuum Pencil GrinderPrecision Deburring & Finishing with Source Capture

• Vacuum Shroud Diverts Dust& Debris to Vacuum Source

• Captures Contaminants suchas Hexavalent Chromium

• Ideal for Use onTooling, Dies, Molds,Production Parts

Reorder No. D09.03

Roll Finishing Machines from DynabradeFeaturing Tool Post Grinders and NEW SuperFinisher

• Tool Post Grinders ProvideOuter Diameter Grinding,Surface Preparation andFinishing

• NEW SuperFinisher ProducesFinishes that are Predictable,Consistant and Repeatable

Discover The Dyna

1Rig

Lig

OU

NE

1Va

Flexi

Dynabrade Product SpotlightVolume 4 • No. 1 Reorder No. D09.04R

1.3 hp Right Angle Disc SanderLightweight Tool Delivers BIG Power and Performance! Accepts 7" (178 mm) Diameter Abrasive Discs.➤Grind Sheet Metal, Composites, Fiberglass, Carbon Fiber➤Sand, Deburr Metal Parts➤Remove Mill Finish➤Remove Paint and Rust

Model 52657 6,000 RPM, 5/8"-11 Spindle ThreadModel 52802 7,200 RPM, 5/8"-11 Spindle ThreadModel 53868 8,500 RPM, 5/8"-11 Spindle Thread

Model 52656 6,000 RPM, M14x2 Spindle ThreadModel 53869 8,500 RPM, M14x2 Spindle Thread• Tool accepts optional 7" (178 mm) diameter Abrasive Discs with 7/8"

(22 mm) center hole. Ask about Dynabrade’s abrasive offering!• 5/8"-11 spindle thread models each include 51151 Backing Pad,

7" (178 mm) diameter, and flange.• Quiet, robust air motor is governor-controlled to maintain

consistent RPM under load.• Convenient Spindle Lock allows quick and easy changing of

backing pad or abrasive.• “Wick Lube” System extends gear life with simple lubrication.• Vibration dampening side handle is removable for left or right hand use.• Exhaust system rotates 360º to ensure exhaust is always directed away from operator.• Insulated throttle handle reduces cold air transmission to hand. Handle position is adjustable.

Model Motor Motor Maximum Air Flow Spindle Air Pressure Weight Length HeightNumber hp (W) RPM SCFM (LPM) Thread PSIG (Bar) Pound (kg) Inch (mm) Inch (mm)52657 1.3 (970) 6,000 40 (1,138) 5/8"-11 Male 90 (6.2) 4.5 (2.0) 10 (255) 3-9/16 (90)52802 1.3 (970) 7,200 40 (1,138) 5/8"-11 Male 90 (6.2) 4.5 (2.0) 10 (255) 3-9/16 (90)53868 1.3 (970) 8,500 40 (1,138) 5/8"-11 Male 90 (6.2) 4.5 (2.0) 10 (255) 3-9/16 (90)52656 1.3 (970) 6,000 40 (1,138) M14x2 90 (6.2) 4.5 (2.0) 10 (255) 3-9/16 (90)53869 1.3 (970) 8,500 40 (1,138) M14x2 90 (6.2) 4.5 (2.0) 10 (255) 3-9/16 (90)

52657

95541

95848

Gear Oil & Gear Oil GunIncluded with Tool95848 Gear Oil• To lubricate Dynabrade tools

with “Wick Lube” System,such as 52657 above.

95541 Push-TypeGear Oil Gun• Easy one-hand operation.

Backing PadThermoplastic Pad with Fins51151• 7" (178 mm) diameter.• Accepts Abrasive Discs with

7/8" (22 mm) center hole.• Fins help expel heat from

disc pad, extending disc life.• Flange nut included.

DYNORBITAL®

SUPREMEDYNORBITAL-

SPIRIT®NEW DYNORBITAL®

SILVER SUPREME

THE FUTURE OFRANDOM ORBITAL SANDING

IS NOW!

Reorder No. D09.08

Dynabrade Product SpotlightVolume 4 • No. 2 Reorder No. D09.15

1.3 hp Right Angle Vacuum Disc SanderFlexible Vacuum Shroud Diverts Dust & Debris to Vacuum Source!Accepts 7" (178 mm) Diameter Abrasive Discs.

➤Grind, Sand, Deburr, Finish➤For use on Non-Ferrous Surfaces such

as Carbon Fiber, Composites, Fiberglass, Turbine Blades, more➤Vacuum Shroud Captures Airborne Contaminants such as Hexavalent Chromium

Model 52597Central Vacuum, 6,000 RPM, 5/8"-11 Spindle Thread• An essential tool for nuclear plants, aerospace, wind energy, automotive and marine markets.

• Tool accepts optional 7" (178 mm) diameter Abrasive Discs with 7/8" (22 mm) center hole.

• Includes 51151 Backing Pad, 7" (178 mm) in diameter, and flange.

• Lightweight non-marring Vacuum Shroud is constructed of high-quality clear urethane.

• 3/4" (19 mm) Shroud Brush assists in capture of airborne contaminants.

• Shroud has “View Port” which allows operator to see abrasive disc and work surface.

• Quiet, robust 1.3 hp air motor is governor-controlled to maintain consistent RPM under load.

• Convenient Spindle Lock allows quick and easy changing of backing pad or abrasive.

• “Wick Lube” System extends gear life with regular lubrication.

Model Motor Motor Sound Maximum Air Flow Spindle Air Pressure Weight Length HeightNumber hp (W) RPM Level SCFM (LPM) Thread PSIG (Bar) Pound (kg) Inch (mm) Inch (mm)52597 1.3 (969) 6,000 76 dB(A) 40 (1,138) 5/8"-11 Male 90 (6.2) 5.8 (2.6) 14-5/8 (373) 3-7/8 (104)

Ask about Dynabrade’s“AbrasivEdge” offering!

(See DP08.07.)

Includes Conductive Hose &Cuffs, to shield operator fromelectrostatic discharge (ESD)!

1-1/4" diameterSwivel Cuff improvesmaneuverability!

Vibration Dampening Side Handle(for left or right hand use)

Vacuum Shroudwith Unique“View Port”

52597

Gear Oil & Gear Oil GunIncluded with Tool95848 Gear Oil• To lubricate Dynabrade tools with

“Wick Lube” System, such as 52597 above.

95541 Push-Type Gear Oil Gun• Easy one-hand operation.

Backing PadThermoplastic Pad with Fins51151• 7" (178 mm) diameter.• Accepts Abrasive Discs with 7/8" (22 mm) center hole.• Fins help expel heat from disc pad, extending disc life.• Flange nut included.

95541

95848

FASTESTSHIPPING!

HIGHESTQUALITY!

No. D09.02

No. D08.17

No. D08.16

No. D09.15

No. D09.08

No. D09.04R

No. D09.03

UCTIONS FROM DYNABRADE

abrade Difference!

Vacuum Die Grinders, Drills,Cut-Off Wheel Tools, Routers

Catalog showcases Dynabrade’s completeline of Vacuum Tools and Accessories.

Introduced 11/17/2009

.4 hp Pistol Grip DrillsNew ergonomic design offered in speeds

from 500 to 20,000 RPM.

Introduced 1/6/2010

Wind Energy BrochureFeaturing the abrasive power tools used

in this key global market.

Introduced 2/12/2010

Wrenchless Pencil GrinderOffers precision deburring and quick,

wrenchless change of accessory.

Introduced 4/2010

Reorder No. D09.18

Dynabrade Vacuum Tools and AccessoriesBreathe Easy and Work Safe with Dynabrade

Reorder No. D09.20

Industrial QualityDrills From DynabradeAir-Powered Models in Efficient, Ergonomic Designs

• Drills Offered in a Variety ofSpeeds and Configurations

• NEW Pistol Grip Models (Pages 2, 5)and Vacuum Models (Pages 9-10)

• All Tools Designedwith TheDynabradeDifference!

Reorder No. D10.01

Dynabrade Tools forThe Wind Energy MarketAbrasive Power Tools for All Phases of Production

Reorder No. D10.03

• Allows Easy Changing ofAccessory Without Wrenches

• Ideal for Use on Tooling, Dies,Jewelry, Molds, Intricate Parts

• Turbine-DrivenAir Motor RequiresNo Lubrication

WrenchlessPencil GrinderPrecision Deburring & Finishing in NEW Design

1.3 hp, 7" Diameterht Angle Disc Sander

ghtweight tool delivers big powerand performance.

Introduced 1/29/2009

“D3” Random Orbital Sander Series

Updated Dynorbital® Supremeand Dynorbital-Spirit®, plus

EW Dynorbital® Silver Supreme!

Introduced 3/23/2009

1.3 hp, 7" DiameterVacuum Disc Sander

ible shroud diverts dust and debristo vacuum source.

Introduced 7/7/2009

FREE ON-SITEDEMOS!

BESTSERVICE!

No. D10.03

No. D10.01

No. D09.20

No. D09.18

Current Dynabrade Product Introductions

DYNABRADE DO BRASILRua Oneda, 632 • Sao Bernardo do Camp • SP - CEP 09895-280

DYNABRADE INDIA ABRASIVE POWER TOOLS Pvt Ltd.EL-54, TTC Industrial Area, M.I.D.C. Mahape, Electronic Zone, Navi Mumbai - 400705, Maharashtra, India

DYNABRADE AUSTRALIA Pty Ltd.Unit 2, 13-14 National Drive • Hallam, Victoria 3803, Australia

DYNABRADE, INC.DYNABRADE INTERNATIONAL8989 Sheridan Drive • Clarence, NY 14031-1419

DYNABRADE EUROPE S.à r.l.Zone Artisanale, Op Tomm 6L-5485 Wormeldange–Haut, Luxembourg © DYNABRADE, INC., 2010

a new star in random orbital sanding was also introduced –the Silver Supreme!

Vacuum Disc Sanders, Die Grinders, Cut-Off WheelTools and Drills were introduced to target those industriesrequiring dust collection and source capture, allowing cleanerand safer work environments.

The next-generation .4 hp Straight-Line Die Grinders arenow available for sale, and this motor series will be availablein many more configurations throughout the upcoming year.

Our expanded family of industrial Pistol Grip Drills usingthe new .4 hp motor will add a new dimension to our productline, making Dynabrade a legitimate player in this marketplace!

And let’s not forget our Steel Housing Die Grinders forshipyards and foundries, our DynaLocke® dual-actiongrinding and sanding attachment, new Wrenchless PencilGrinder, and last but not least, our SuperFinisher for rollgrinding and polishing!

New products are truly “The Dynabrade Difference” thatseparates Dynabrade from the competition. Congratulationsto each Dynabrade employee for doing your part in makingDynabrade the first choice in industrial power tools!

Good luck and good selling!

(article continued from front page)

Steel Housing Die GrindersTools feature steel housings for increased

durability and heavy-duty use.

Introduced 4/19/2010

Reorder No. D10.04

Steel HousingDie GrindersHeavy-Duty Air Tools where Durability & Quality are a Must!

• Tools Feature Steel Housingsfor Increased Durability

• Used in Steel Fabrication,Welding Operations, Shipyards,Foundries and More!

Dynabrade Product SpotlightVolume 5 • No. 2 Reorder No. D10.07

.4 hp Dynabrade Die GrindersFor Use on Metal, Fiberglass, Carbon Fiber, Composites and More!Dynabrade introduces .4 hp (298 W) Die Grinderswith ALL-NEW design for peak efficiency and longerlife! Ideal for rapid material removal, deburring,finishing and polishing, these new tools representthe FINEST in Dynabrade quality and innovation!

See All NEW Die Grinder Models on Page 2!

Model 4832525,000 RPM

(see page 2)

Ergonomic Tool Housing Oval-shaped housing conforms to naturalshape of hand for optimum comfort.

Hardened Tool Cylinder Tool cylinder is made of case-hardened material,to retain core toughness and prevent cracking.

Governor-Controlled Motor(950 RPM to 30,000 RPM Models)Maintains consistent motor speed underload. Color-coded for easy identification.

Increased Tool Life Unique “Pre-Filter” provides extra defense againstcontaminants in air stream, increasing tool life.

Comfortable Tactile Grip Tool’s tactile grip is co-molded to compositehousing, providing comfortable non-slip grip.

Integrated Safety-Lock Throttle LeverIncluded on all models. Contoured shape for operatorcomfort, with new dowel pin that minimizes lever wear.

3-Vane Tool Rotor 3-vane rotor allows wider offering oftool speeds. Achieves stall-torqueand horsepower performance equalto tools with 4-vane rotor.

LightweightTool DesignEach model weighs 0.5 oz(15 g) less than itsprevious version!

Full-Length Housing Core Housing core runs the full length of tool, serving as “backbone”and providing consistent weight distribution of tool.

Innovative Air Flow ChannelExhaust air moves through channelbetween composite housing andhousing core, maintaining comfortabletemperature of tool housing!

No. D10.04 No. D10.07

.4 hp Straight-Line Die GrindersAll-new Die Grinderdesign for peak efficiencyand longer tool life.

DynaLocke®

HeadAllows tool to run in both rotary ANDrandom orbital mode! New 1.3 hpRight Angle Tool (52760) includesDynaLocke® Head.

Introduced 4/19/2010