Mud Mixing Plant from start of fabrication to installation onboard MV Trinity Supporter

(Singapore) End client NIKO IndonesiaThis was a capital sale project not a rental project

2250 bbl Tank capacity with separate 250 bbl Brine mixing tank 2 x 585Kw Generators1 x air conditioned Circuit Breaker Module12 x mud guns20 x 11Kw Agitators3 x 8 x 6 x 14 Centrifugal Pumps2 x Big Bag Mixer2 x Hi - Ride Mixers1 x CD 500 Centrifuge2 x 9.2Kw Conveyors1 x Mud Lab1 x Storage Container

MV Trinity Supporter Deck during survey

Start of Fabrication after design acceptance

Day 1 start of installation at Loyang Offshore Base Singapore

Installation

Installation of CD 500 Centrifuge

Installed mixer pumps / Pipe work / Lighting / Electrics prior to commissioning phase

Utilities: Brine / Sea water / drill water / mixing pump transfer lines and equalization upper and lower manifolds, conveyor for centrifuge solids

transfer to future cuttings box lay down area.

The top of tanks were designed to have a modular grated deck eliminating trip hazards for the operators all valves shafts were extended so the operators had easy access during

operation, all agitator starters were mounted on easy reach stands directly next to each agitator,

The centrifuge could take suction from any tank and discharge to any tank

Looking Forward to Aft with access stairs to Port and Starboard side of tanks and Starboard Aft view of the Centrifuge package / mixing and equalization manifolds

pictures taken prior to commissioning and hand over to client the final commissioning was carried out at Anchorage East Coast Bay Singapore.