ms-3580
DESCRIPTION
This machine demonstrates increased feed efficiency to handle extra heavy weight 16-ply denim. Engineered with extra feeding strength for seaming the inside of jeans. The machine is best suited for lap seaming jeans, denim jackets, work uniforms, etc. constructed of heavy weight materials.TRANSCRIPT
MS-3580 SeriesFeed-off-the-arm, 3-needle Double Chainstitch Machine
This machine demonstrates increased feed efficiency tohandle extra heavy weight 16-ply denim.
Engineered with extra feeding strength for seaming the inside of jeans.
MS-3580 Series
MS-3580SF1SN
◎Strong feeding mechanism of the puller
The puller incorporates a one-way clutchmechanism which contributes to consistentfeeding of the material.(The mechanical part is protected by a cover for added safety.)
The feeding amount of needle thread is automaticallyadjusted to the pressure foot height during sewing,thereby producing even stitches withconsistency.
When the looper pushbutton (*) located on the operatorside of the top of the machine head is pushed, the tipof the looper moves downward to allow the operator tothread the machine head with ease.
The differential feed adjusting lever can be adjustedeven during sewing, thereby effectively preventingcloth slippage between two plies.
◎Thread take-up device which helps produce even stitches with consistency
◎The machine has been designed to achieve the best possible ease of threading. ◎The differential feed adjusting lever
is located on the front face of the machine head.
nt
ver for added safety.)
utomaticallyi
ch hhelllpppsssh consistency
MS-3580 SeMS-3580 SeFeed-off-the-arm, 3-needle Double Chainstitch Machine
Smooth, efficient feeding of extra heavy weight 16-Ply,14 oz denim for seaming inside seams.
MS-3850SF0SN
MS-3580 SeriesMS-3580 Series
MS-3580SF1SN
MS3580SF0SN
MS3580SF1SN
MS3580SF0RN
MS3580SF1RN
MS3580SG0SN
MS3580SG1SN
MS3580SG0RN
MS3580SG1RN
7.2
6.4
Mechanicaldriving method3
Medium- toheavy-weight
materials (10~14oz)
2.38
●
●
●
●
●
●
●
●
11.9
Steel teeth (standard)
Steel teeth (reverse teeth)
Steel teeth (standard)
Steel teeth (reverse teeth)
Parts No.40068568
Parts No.40077682
Parts No.40068568
Parts No.40077682
Model No.
■SUBCLASS
Materials Number ofneedles
Needle gauge(mm)
Provided
Differential-feed
Not provided
Top feed pullerdriving method
(Standard) (Reverse teeth)
Roller configurationDifference in heightof the throat plate
(mm)
Top feed rollerwidth (mm)
*Looper pushbutton
◎The machine type without the differential feed capability
The machine is best suitedfor lap seaming jeans, denim jackets,
work uniforms, etc.constructed of heavy weight materials.
The machine demonstratesincreased efficiency of feedeven when seaming a yokepart (16-layered) in hipseaming processes.
3-needle, 6-thread, double chainstitch machine
For medium- to heavy-weight materials: jeans, denim jackets, work uniforms, etc.
4,500rpm
3,500rpm
2.1mm~3.6mm (standard 3.2mm)
UY130GS (standard) /Nm140 (#22)
33mm
6
23.5kg
Max. 9mm (at the time of delivery 6.5mm)
11.9mm
Automatic rotary-pump type oiling
JUKI MACHINE OIL No. 18
To be installed on the table by means of an auxiliary drive assembly MT03
6.4mm, 7.2mm
Main feed: Slide-type stitch-length adjusting method
MS-3580S*1SN MS-3580S*0SN
Stitch type
Application
Max. sewing speed
Normal sewing speed
Needle gauge
Stitch length
Needle (standard)
Needle bar stroke
Number of pieces of thread used
Weight of the machine head
Lift of the presser foot
Top feed roller width
Feed adjusting method
Lubrication
Lubricating oil
Installation method
■SPECIFICATIONS
■WHEN YOU PLACE ORDERS ■OPTIONS
MARKETING & SALES H.Q.✽ Specifications and appearance are subject to change without prior notice for improvement.✽ Read the instruction manual before putting the machine into service to ensure safety.✽ This catalogue prints with environment-friendly soyink on recycle paper.
SEPTEMBER, 2008 Printed in Japan(C)
8-2-1, KOKURYO-CHO, CHOFU-SHI, TOKYO 182-8655, JAPANPHONE : (81) 3-3480-2357, 2358FAX : (81) 3-3430-4909http://www.juki.com
Model name
Differential feed: Lever adjusting method Without the differential feed capability
MS-3850SF0SN
●Auxiliary drive assembly MT03
●Folder assembly
●Table stand JTMS5Table stand for the MS-3580 (without casters)
Various folder assemblies are available according tothe properties and weight of the material to be used.
MS3580S□□□N
Needle gauge Code
F
G
6.4mm (1/4")7.2mm (9/32")
Roller configuration Code
S
R
Standard
Reverse teeth
Description Outlet dimension ApplicationParts No.
3/32" folder
18-1/8" folder
5/32" folder
9-1/8" folder*
40072322
40066942
40072324
40072328
2.4mm
3.2mm
4.0mm
3.2mm
Medium-weight materials
Extra heavy-weight materials
Stitch type Code
SStandard
Roller width Code
N11.9mm
Differential-feed Code
0
1
Not provided
Provided
★This table stand is specifically designed for the SC-510. The M-51 motor should be used.
*Since the top of the folder is shorter than the standard one, the material can be handled with ease.
★To install the machine on the table, the auxiliary drive MT03 is required.
Medium- to heavy-weightmaterials (standard)
Medium- to heavy-weightmaterials
To order, please contact your nearest JUKI distributor.
Please note when placing orders, that the model name should be written as follows: