MOUNTED REVERSIBLE PLOUGHS JUWEL

Reliability, ease of use and quality of work in a completely

new plough model

The use of ploughs is gaining more and more importance in arable farming as the use of crop care products is being reduced. For many farmers, ploughs are the first choice, above all as an al-ternative to the use of total herbicides and as a means to control herbicide- resistant weeds. Clean plough furrows additionally help prevent plant dis-eases and facilitate the control of mice

2

and other pests. Furthermore, ploughs leave clean field surfaces without har-vest residue and thus create optimal conditions for the germination of the next crop sown. As a result, there still is no real, sustainable alternative to the plough, even today.

Numerous studies have shown, for example, that ploughs are the best

solution for the optimal development of rapeseed roots, as they loosen and aerate the main root zone in a targeted manner and thus establish the basis for sustainable, high yields.

The Juwel generation of ploughs from LEMKEN combines operational reliability and ease of use with an excellent quality of work.

The Juwel ploughs have extensive fea-tures and versatile accessories allowing each farmer and contractor to tailor the specification to his individual require-ments. This includes numerous options for choosing interbody and under-frame clearance, stepped and continu-ously variable options for adjusting working width, and mechanical or hy-draulic overload protection systems.

The Juwel has the following equipment variations:

• Juwel ploughs are available with 90, 100 or 120 cm body spacing.

• The basic version allows four differ-ent working widths to be set.

• The Juwel M V features hydraulic working width adjustment as stand-ard. Using a double-acting hydraulic cylinder, working widths from 30 to 60 cm per body can be set from the tractor seat. Both the Juwel and the Juwel M V feature a shear pin in the standard specification.

• The Juwel 7/8 M T and Juwel 7/8 M VT versions feature the Hydromatic auto-reset trip device which enables the plough bodies to move simulta-neously upwards and to the side.

• As Juwel 7/8 M X and M V X with automatic mechanical overload protection.

• The Juwel 8 i is available with ISOBUS control.

• OF version for on-land and in-furrow ploughing.

3

4

M PZZ

MPZ

ZPZ

MZ

M

PZ

Z

1 2

3 4

5

Optiquick - the prerequisite for perfect ploughing

• The plough has been optimally set when the tractor/plough pull line – in Fig. 1 the connection line between Z and PZ – runs through the middle of the rear tractor axle M. Z marks the draw point at which the lower links cross (if extended forwards). PZ indi-cates the centre of the plough.

• First of all the front furrow width is set using the outer turnbuckle. The trac-tor/plough pull line is still not running

A precise plough setting is crucial to mi-nimise material wear and to significantly reduce fuel consumption. To this end, LEMKEN has developed its unsurpassed Optiquick setting system which is also used with the Juwel M.

Optiquick can be used to set the front furrow width, independently from the tractor/plough pull line, simply and quickly. Optiquick therefore helps you save time and costs.

correctly in Fig. 1, as the line between Z and PZ still does not go through the middle of the back axle.

• Secondly, side force is eliminated by adjusting the inner turnbuckle. The tractor/plough pull line now crosses the rear axle of the tractor at Point M (Fig. 2). Despite the draw point correc-tion, the width of the front furrow does not change.

The LEMKEN Optiquick setting system ensures that ploughing is free from side forces. To ensure high stability and a long service life, the bearings have wear-resistant bushes and hardened pins. The bearings can be lubricated.

Optimally set - save time and costs

Juwel M - front furrow width and pull point setting

Juwel M V - ploughing without side pull at varying furrow widths

The Optiquick setting center

both for a narrow (Fig. 3) and wide working width (Fig. 4).

• Vari technology ensures that the front furrow width is automatically adjusted whenever the working width is changed.

• Even the Juwel M V allows the front furrow width and pull point to be set independently of each other.

• Thanks to Optiquick and Vari tech-nology, Juwel M V ploughs always work smoothly and without side pull

6

The large clearance between the support wheel and ground ensures reliable plough rotation.

This advantage is especially useful on tractors with a low lifting height, as well as on heavy five to seven-furrow ploughs.

Safe when turning – with more ground clearance

7

The short, stable turnover axle can withstand heavy-duty impact and constant loads.

• It is shaped for optimum resistance, runs in tapered rollers and can be lubricated centrally.

• Due to the heat-treated steel used, the wear-resistant pivot bearing is extremely durable and guarantees a long service life.

The special design of the pendulum wheel guarantees a large ground clear-ance and ensures an optimum working position and a safe and shock-free swiv-elling of the wheel during the turning process. Depending on the number of furrows and set working width, it is possi-ble to plough all the way up to ditches, field boundaries, and fences.

• The working depth is adjusted sepa-rately for both sides via a half-hole matrix, without any need for tools.

• When the working width is adjusted, the pendulum wheel is also adjusted.

To ensure optimum ploughing work, the working depth is adjusted to soil condi-tions which change from shallow to deep or from heavy to light. The hydraulic Uni wheel is used here to ensure uniformly deep ploughing.

• The working depth can also be adjusted hydraulically for heavy ploughs and on heavy soil using a double-acting control unit only.

• The integrated damper ensures that the wheel is swivelled gently during the turning process.

It is recommended to use the Uni wheel for safe transportation by road and for ploughs with four or more furrows. It enables a quick and simple change between working and transport position.

• The working depth is easily adjusted using a pin without having to lift the Uni wheel.

• The plough is locked in the central position for transportation.

• The Uni wheel is also suitable for reversing.

Well supported

Uni wheel with hydraulic setting

Uni wheel with hydraulic suspension

Pendulum wheel with hydraulic suspension

The tilt of Juwel ploughs is adjusted easily and precisely via a cap nut and stop; this adjustment can be made separately for each side.

• They are easy to handle and protect threads against dirt.

• This ensures that the tilt adjustment will keep operating smoothly.

Optionally, Juwel 8/10 M ploughs can also be equipped with a memory reversing mechanism with central tilt adjustment.

• This allows the tilt to be comfortably adjusted from the tractor cab via a separate spool valve.

• An optional mechanical tilt display facilitates the adjustment.

Mechanical tilt adjustment, separate for each side

Hydraulic tilt adjustment, central

8

Safe to use and cost-effective on all soils

DuraMaxx - ’Maximum Durability’ plough body

The DuraMaxx bodies are a completely new plough body concept which enables the service lifes to be increased by 50 % and the set-up time to be reduced by up to 80%.

• The DuraMaxx parts are manufac-tured from much harder steel than before. This is made possible as the material is no longer weakened by drilling and punching.

• Mould boards and slats are sup-ported fully by the frog and other support structures. They are no longer a load-bearing part of the plough body. This means they can be worn much thinner without risk of snapping due to the soil forces on them.

9

The DuraMaxx plough body is available with mould boards or slatts.

• The mould board and the slatts are attached with only two hooks.

• In the case of the slatted bodies the clearance between the slatts and supports is greatly increased. Sup-ports are set in line with slats, which reduces the possibility of blockages from soil running through the slatts.

The DuraMaxx plough bodies are designed in such a way that mould boards, slatts, and shins can be changed quickly without tools.

• The shin is held in place by a lynch pin. Pulling the pin allows the shin to be removed. The shin, in turn, holds the mould board or slatts in place. Once the shin is off, these slide for-wards and out without the need for any tools.

• Even the share point, which is at-tached with a single bolt only, can be changed much more quickly than on conventional systems.

Plastic slatts are also available for the DuraMaxx plough body. These are ideal for use on extremely sticky soils and in soil conditions in which little pressure is applied to the mould board.

• The best sliding properties are achieved by using plastic strips at the top and bottom of areas of the plough body susceptible to adhe-sion.

• The DuraMaxx body therefore works without “adhesion problems” even under extreme conditions.

Can be changed without tools and quickly

The body structure DuraMaxx hybrid for sticky soils

10

Cost-effective plough bodies

The frog of the Dural body is tempered and extremely strong.

• The pitch of the plough bodies is adjustable to ensure consistently good penetration of the plough into the soil.

• The smooth transition from the share to the mouldboard and the low-re-sistance shape make the plough even easier to pull.

• The mouldboards made of hardened special steel are designed for low wear without screws or bolts in the main wearing zone.

• The extra large mouldboard shin can be replaced individually for greater cost-effectiveness.

The slats of the slatted bodies are made of thick, fully hardened special steel and can be individually replaced.

• The attachment screws are deeply sunk to ensure that the slats remain firmly in place throughout their extremely long service life.

• Slatted bodies and conventional mouldboards are based on the same basic body.

• The shares are divided and made of micro-alloyed boron steel.

• The overlapping design prevents roots or foreign objects from catching.

• High material density and firm attachment provide for resistance to wear and breakage.

• The wear zones of the share wings are significantly larger than with conventional shares.

Dural mouldboard

Dural slatted bodies

Slatted bodiesMouldboard shin

Landside

Sword coulter

Landside wedge

Share wing

Share pointShare pointcoated

Mouldboard shin

Mouldboard

Share point cranked

11

Superior operating comfort with ISOBUS control In agricultural machinery, work processes are being increasingly networked with more implements that are controlled electronically. The ISOBUS standard allows solutions to be implemented across several machines, making it obvious that due to the ease of operation offered by ISOBUS, this system should also be available for ploughs.

The GPS-controlled working width adjustment allows ploughing with a precisely straight furrow and working towards a target furrow, for example to avoid an additional turn at the headland. It is advisable to use the CCI-1200-Terminal.

• The 12.1” widescreen display on the CCI-1200 allows several functions to be displayed at the same time and therefore provides an optimal over-view of work processes.

The Juwel 8 i controls plough rotation and the settings for front furrow, work-ing angle, working width and working depth via the hydraulic support wheel as standard. These functions are controlled via the CCI terminal or the ISOBUS system on the tractor. Additional functions such as furrow press operation or settings for the Hydromatic overload protection are available as options.

• The Juwel 8 i, on-board computer allows operating functions to be combined, saved and activated for up to four different scenarios, for example for ploughing on slopes and finishing fields. For preparing a

Operating comfort Juwel 8 i

shallow end furrow, a scenario with a different working angle and a shal-lower support wheel setting would, for example, be activated. This fea-ture allows the ISOBUS functionalities with tractors to be utilised in mounted ploughs.

• The user interface on the display is intuitive and clear, making it easy to adjust any plough settings as required.

• Operator comfort can be increased even further by integrating controls compatible with the ISOBUS IL4 standard such as joysticks or multi-function levers.

Juwel 8/GPS-based working width control

Disruption-free ploughing in any conditionsWith mechanical non-stop overload protection: simplicity and strength

Whenever an obstacle is encountered, the elastic, high-quality surface-hard-ened spring steel beams and body legs can deflect exceptionally far to the side.

• The beams are firmly guided in the process to ensure that they remain in position at all times.

• Both the leg brackets and the beams c/w roller are bolted and together not welded.

• This means high strength and a long service life of the overload elements.

The Juwel features double-cut shear-off protection with a shear bolt as standard.

• The shear bolt additionally protects the plough against damage if the system becomes trapped under rocks or roots.

All LEMKEN overload protection sys-tems protect against damage from the share point colliding with underground obstacles. The overload protection in all Juwel ploughs features not only double-cut shear-off protection with a shear bolt as standard, but also a steer-ing system with high trigger and re-en-try forces to ensure that the system is triggered softly and smoothly when-ever an obstacle is encountered. This protects both the tractor and the plough.

• The auto-reset spreader roller fitted to the Juwel X, which runs between the tandem beams, is not exposed to high friction forces, neither when the overload system is triggered, nor when the plough bodies re-enter the soil.

• As a result, force loss at the re-entry of the plough bodies into the soil is minimised.

• This ensures even trigger characteris-tics with smooth, effortless activation and powerful, speedy plough body re-entry.

Response to obstacles Double protectionOverload protection to prevent damage

12

With Hydromatic hydraulic overload protection: versatility and comfort

The Juwel T version features Hydromatic overload protection. The Hydromatic hydraulic overload protection is easily able to deflect vertically up to 38 cm and horizontally up to 20 cm at the same time, even when obstacles are hit from the side.

• This high level of deflection ensures consistently disruption-free work, even with deep ploughing.

• Higher trigger forces can be comfort-ably adjusted from the tractor cabin.

A minimum and a maximum value for the release force can be set between 120 and 200 bar using a tap (option) on the control block, e.g. for shallow or heavy soil locations.

• The working pressure is then set, hydraulically from the tractor seat, within the selected working range.

• This is done without the need to monitor a pressure gauge.

• The fixed connection between plough beam and frame allows low system pressures.

Avoiding obstacles by simultaneous upward and side movements

Individual setting

13

In M V models with memory reversing mechanism, the three hydraulic func-tions, i.e. the adjustments for the work-ing width, tilt and front furrow, can be operated via an additional control

element with only one double-acting spool valve on the tractor. This ensures that a comprehensively featured plough can also be used with a tractor with only few hydraulic connections.

Greater operating comfort

Variable to perfection - the Juwel M VGood ploughing is largely dependent on the working width and the working depth of the individual plough bodies. The LEMKEN Juwel M V can fulfill the agricultural requirements for ploughing in the best possible way.

To ensure that the required working effect can be achieved depending on the type of soil, moisture conditions, and whether a seedbed or winter furrow is required, the working width of the Juwel M V can be simply, quickly and steplessly adjusted during work. All bodies and the depth wheel are automatically adjusted when the working width is adjusted.

The narrow seed furrow provides better tilling - the ideal condition for simple seedbed preparation with fewer subsequent operations required.

The wide winter furrow leaves a coarse surface to be broken up by the frost.

Juwel M V simlifies the ploughing of wedge-shaped pieces of land, curved headlands, and around poles and trees. Simple, hydraulic adjustment of furrow width straightens the work. In addition the tractor is always used to capacity.

The Juwel M V features hydraulic wor-king width adjustment as standard. Using a double-acting hydraulic cylinder, working widths from 30 to 60 cm per body can be set from the tractor seat.

14

15

Screwed on expansion flange bushing

Screwed on tension bushing

Lubricating point

Plough frame

Fixed main bearing pin

Grooved cap nut

The frame plates which support the swivel brackets of the Juwel M V and the link are bolted to the frame.

• This ensures great stability, high endurance strength and high fitting accuracy.

The pivot of the Juwel M V swivel brackets supported next to the frame is situated close to the body.

• As a result, the bearings and compo-nents are exposed to reduced loads.

• All bearings have wear-resistant bushes, hardened pins, and can be lubricated.

The main bearing pin of the swivel bracket is fitted with tension bushings and is braced with the frame plates against rotation.

• The swivel bracket features perma-nently braced flange bushings. The two telescopic bushings for adjust-ment of the cutting width guarantee a long service life.

• When worn, each part can be replaced separately.

Strong frame structure for all requirements

The robust, thick-walled square tube made of micro-alloyed, fine-grained, spe-cial steel provides the strong foundation for the new frame structure.

• The frame can be extended subse-quently by a pair of plough bodies.

• It is guaranteed to have a low weight and a long service life.

The adjustment brackets securely bolted to the frame provide great strength, reliability, and high fitting accuracy.

• When the central bolt has been loosened, four working widths can be set between 30 and 50 cm.

• Skimmers and disc coulters are adjusted automatically as a new furrow width is set.

The long body spacing, plough bodies attached to the side of the frame, and the shape of the legs, create large clearances between the plough bodies and skim-mers.

• Blockages are avoided even at a narrow working width.

• The legs feature a double-cut shearing off safety device.

The square frame The adjustment brackets

The frame plates The variable bearing The bearings

Body spacing

16

Skimmers for blockage-free ploughing

Adjustment of the skim-mers without tools

No twisting of the skimmer

Juwel skimmers are fitted with strong flat stalks connected to the frame by two bolts.

• The flat stalk prevents the skimmer from twisting.

• Skimmers can be quickly removed if not required.

Working depth and angle are set inde-pendently of each other without tools.

• The working depth is set using a pin on the flat stalk. As a result, all skim-mers on the plough are set uniformly without the need for further align-ments or measurements. The angle is unchanged as depth is amended.

The innovative skimmers with different share lengths ensure blockage-free plou-ghing even under difficult conditions.

• The special shape of the shares mini-mises wear and increases the service

life. Their mode of operation let the soil to flow very well.

• The specially shaped mould boards turn the soil neatly into the furrow bottom.

• A plastic mould board is available for sticky soil conditions and soils which apply little pressure to the skimmer.

Always well equipped

DS1 MS1DS0 MS3 MS2

The trash boards are mounted directly on the leg and can be set over a wide range.

• They ensure blockage-free work and the neat insertion of plant material.

• Trash boards are also available in plastic for sticky soil conditions.

Trash boards for blockage-free work

The smooth disc coulter is corrugated at the sides to provide continuous drive even when breaking up large amounts of organic material.

• The disc coulter arms are swivelled vertically for depth adjustment and can be fixed in position with a screw when engaged with the gears.

• The smooth bearings on the un-ploughed side are double-sealed against dirt ingress.

• The disc coulters are available in a range of versions and mounting positions: 1) 0 500 mm, next to skimmers 2) 0 590 mm, in front of/next to skimmers, adjustable 3) 0 500 mm, at T-element next to skimmers 4) 0 500 mm, suspended in front of skimmers 5) Alternatively, serrated discs are available in all diameters.

Disc coulter Subsoiler for effective loosening

The specially shaped subsoiler delivers a particularly good loosening effect.

• The subsoiler depth can be adjusted without tools, and the subsoiler can also simply be removed without requiring tools, if necessary.

• All wear parts can be individually replaced. The stalk guard prevents wear on the stalk.

1 2

3 4 5

17

In recent years, there has been a trend towards larger tractors with wider tyres (710mm, 800mm or wider). There is not enough space for these wider tyres in

the furrows, resulting in harmful soil compaction when driving across loos-ened soils and along furrow edges.

Lower soil compaction during on-land ploughing has a beneficial effect on the soil structure.

On-land and in-furrow ploughing

Juwel OF

1,2

1,0

0,8

0,6

0,4

0,2

[bar]

[bar]

1,2

1,0

0,8

0,6

0,4

0,2

0

10

20

30

40

50

60

70

80

90

100

(cm)

Onland-P�ügen

KonventionellesP�ügen

18

Onland-ploughing

Conventionalploughing

As GPS steering systems are becoming more popular, on-land ploughing is becoming more practicable for tractor operators. While it was previously mainly tractors with crawler tracks that

were driven outside the furrow for systemic reasons, modern steering systems allow comfortable ploughing with precise furrow alignment even from standard tractors.

If damp soil surfaces prevent the optimal transmission of traction forces, Juwel ploughs can be quickly and eas-ily converted to in-furrow ploughing.

The OF versions of LEMKEN’s Juwel 8 and 10 ploughs allow tractors to be driven both in-furrow and on-land.

The ploughs OF system is adjusted via an inner hydraulic cylinder, which also serves to set the distance to the furrow edge and thus the front furrow width.

The outer ram is used to set the tractor/plough traction line either mechani-cally via an adjustment sleeve or hydraulically via a memory ram.

Support wheel ground clearance during plough rotation

Versatile applications

19

On-land and in-furrow

20

Juwel 10 M and 10 M V – a new dimension in mounted ploughs

A design specially adapted to large tractors:

Lower and upper link points moved further up

• Optimal lower and upper link position with large tractor tyres

160 x 160 x 10 mm frame strength and a turnover shaft with a 130-mm diameter

• Can be used with tractors with up to 450 HP

• Use in even extremely difficult soils

Substantially larger offset in on-land operation:

• Use with tractors with up to 4 metres external width

• Permits the use of large tractor tyres to prevent soil compaction and increase traction

• No slipping in the furrow even in challenging soil conditions

• Always sufficient distance to the furrow edge and therefore no furrow breakage

21

Upper link damping

Transport function

The Juwel 10 M and M V ploughs are optimally equipped with an upper link damping system. With this system, a hydraulic ram in the plough headstock dampens the vibrations caused by travelling on uneven terrain with the raised plough.

• Lower tractor loads

• Safe and comfortable driving with the plough raised

• Protection of tractor and plough parts for a long service life

In combination with a uni wheel and hydraulic frame swivelling, the Juwel 10 M / M V is also available with special transport equipment, which ensures that the frame swivelling ram offsets bumps in uneven terrain. The front steering pin serves as the pivot point.

• Safe and comfortable road transport • No need to uncouple the upper link

Juwel 7 M

Body spacing (cm) 90 100 90 100 90 100 90 100 90 100 Number of furrows 3 3+1 4 4+1 5Working width (cm) 90-150 120-200 120-200 150-250 150-250Weight (kg) 801 813 1,023 1,039 1,013 1,029 1,235 1,255 1,235 1,255Tractor output (PS) (kW)

70-10051-74

80-13059-96

80-13059-96

90-16066-118

90-16066-118

T-version Weight (kg) 1 947 959 1,210 1,226 1,200 1,216 1,463 1,483 1,452 1,472X-version Weight (kg) 3 1,009 1,021 1,302 1,318 1,292 1,308 1,585 1,605 1,575 1,595

Juwel 7 MV 2

Body spacing (cm) 90 100 90 100 90 100 90 100 90 100 120 120Number of furrows 3 3+1 4 4+1 5 3 3+1Working width (cm) 90-165 120-220 120-220 150-275 150-275 108-180 144-240Weight (kg) 912 1,198 1,171 1,187 1,453 1,473 1,453 1,473 957 1243Tractor output (PS) (kW)

70-10051-74

80-13059-96

80-13059-96

90-16066-118

90-16066-118

70-10051-74

80-13059-96

T-version Weight (kg) 1 1,053 1,386 1,359 1,375 1,688 1,708 1,677 1,697 - -X-version Weight (kg) 3 1,120 1,477 1,450 1,466 1,803 1,823 1,792 1,812 - -

Juwel 8 M

Body spacing (cm) 90 100 90 100 90 100 90 100 90 100 90 100 90 100 90 100 Number of furrows 3 3+1 4 4+1 5 5+1 6 6+1Working width (cm) 90-150 120-200 120-200 150-250 150-250 180-300 180-300 210-350Weight (kg) 1,058 1,073 1,289 1,308 1,274 1,293 1,505 1,528 1,409 1,513 1,721 1,748 1,706 1,734 1,937 1,969Tractor output (PS) (kW)

90-13566-99

110-18081-132

110-18081-132

130-22596-165

130-22596-165

140-270103-199

140-270103-199

160-315118-232

T-version Weight (kg) 1 1,250 1,265 1,545 1,564 1,530 1,549 1,825 1,848 1,810 1,833 2,105 2,132X-version Weight (kg) 3 1,311 1,326 1,613 1,632 1,598 1,617 1,900 1,923 1,885 1,908 2,187 2,214

Juwel 8 M

Body spacing (cm) 120 120Number of furrows 4 4+1Working width (cm) 160-240 200-300Weight (kg) 1,373 1,618Tractor output (PS) (kW)

110-19081-140

130-23896-175

T-version Weight (kg) 1 1,629 1,938X-version Weight (kg) 3 1,657 1,973

Juwel 8 MV 2

Body spacing (cm) 90 100 90 100 90 100 90 100 90 100 90 100 90 100 90 100 Number of furrows 3 3+1 4 4+1 5 5+1 6 6+1Working width (cm) 90-165 120-220 120-220 150-275 150-275 180-330 180-330 210-350Weight (kg) 1,172 1,187 1,463 1,482 1,442 1,461 1,733 1,756 1,708 1,731 1,999 2,026 1,974 2,001 2,269 Tractor output (PS) (kW)

90-13566-99

110-18081-132

110-18081-132

130-22596-165

130-22596-165

140-270103-199

140-270103-199

160-315118-232

T-version Weight (kg) 1 1,364 1,379 1,723 1,742 1,698 1,717 2,057 2,080 2,028 2,051 2,387 2,418X-version Weight (kg) 3 1,425 1,440 1,787 1,806 1,766 1,785 2,128 2,151 2,103 2,126 2,465 2,492

Juwel 8 MV 2

Body spacing (cm) 120 120Number of furrows 4 4+1Working width (cm) 140-240 175-300Weight (kg) 1,541 1,846Tractor output (PS) (kW)

110-19081-140

130-23896-175

T-version Weight (kg) 1 1,797 2,170X-version Weight (kg) 3 1,825 2,201

1 T-version = with additional hydraulic overload safety device Hydromatic2 Hydraulically adjustable working width3 X-version = with additional mechanical overload safety device

22

Technical data

23

Juwel 10 M

Body spacing (cm) 100 100 90 100 90 100 90 100 90 100Number of furrows 4 4+1 5 5+1 6 6+1Working width (cm) 120-200 150-250 150-250 180-300 180-300 210-350Weight (kg) 1.432 1.666 1.635             1.651 1.865 1.885 1.850          1.870 2.080 2.104Tractor output (PS) (kW)

150-250110-184

180-300132-221

180-300132-221

210-350154-257

210-350154-257

240-400176-294

Juwel 10 M

Body spacing (cm) 120 120 120 120Number of furrows 4 4+1 5 5+1Working width (cm) 160-240 200-300 200-300 240-360Weight (kg) 1.480 1.726 1.711 1.945Tractor output (PS) (kW)

150-250110-184

180-300132-221

180-300132-221

210-350154-257

Juwel 10 M with reinforced leg bracket

Body spacing (cm) 100 120 100 120 100 100Number of furrows 4 4+1 5 5+1Working width (cm) 132-240 165-300 165-250 198-300Weight (kg) 1.562 1.610 1829 1.889 1.816 2.080Tractor output (PS) (kW)

150-320110-235

180-400132-294

180-400132-294

210-450154-331

Juwel 10 M V

Body spacing (cm) 100 100 90 100 90 100 90 100 90 100Number of furrows 4 4+1 5 5+1 6 6+1Working width (cm) 108-220 135-275 135-275 162-330 162-330 189-385Weight (kg) 1.669 1.963 1.907             1.930 2.197 2.224 2.164          2.191 2.458 2.485Tractor output (PS) (kW)

150-250110-184

180-300132-221

180-300132-221

210-350154-257

210-350154-257

240-400176-294

Juwel 10 M V

Body spacing (cm) 120 120 120 120 120 120Number of furrows 3 3+1 4 4+1 5 5+1Working width (cm) 108-180 144-240 144-240 180-300 180-300 216-360Weight (kg) 1.433 1.739 1.717 2.023 1.990 2.296Tractor output (PS) (kW)

120-20088-147

150-250110-184

150-250110-184

180-300132-221

180-300132-221

210-350154-257

Juwel 10 M V with reinforced leg bracket

Body spacing (cm) 120 120 100 120 100 120 100 100Number of furrows 3 3+1 4 4+1 5 5+1Working width (cm) 108-180 144-240 120-240 150-300 150-275 180-330Weight (kg) 1.537 1.877 1.807 1.855 2.136 2.196 2.103 2.432Tractor output (PS) (kW)

120-24088-176

150-320110-235

150-320110-235

180-400132-294

180-400132-294

210-450154-331

Working width per furrow with 90 cm interbody clearance: 30, 35, 40, 45 cm/with 100 cm interbody clearance: 33, 38, 44, 50 cm/with 120 cm interbody clearance: 40 45, 53, 60 cmJuwel 10 M underframe clearance 80 cm or 85 cm/Juwel 10 M with reinforced leg bracket 90 cm

Working width per furrow with 90 cm interbody clearance: approx. 27-50 cm/with 100 cm interbody clearance: approx. 30-55 cm/with 120 cm interbody clearance: approx. 36-60 cm Juwel 10 M V underframe clearance 80 cm or 85 cm/Juwel 10 M V with reinforced leg bracket 90 cm

LEMKEN GmbH & Co. KGWeseler Straße 546519 Alpen, GermanyTel. +49 2802 81-0Fax +49 2802 81-220info@lemken.comlemken.com

LEMK

EN . 0

1/20

. 175

0624

/en

All s

pecif

icatio

ns, d

imen

sions

and w

eights

are s

ubjec

t to co

ntinu

ous t

echn

ical d

evelo

pmen

t and

are t

heref

ore no

t bind

ing. T

hewe

ight s

pecif

icatio

ns al

ways

refer

to th

e bas

ic eq

uipme

nt. Su

bject

to ch

ange

.

Your LEMKEN dealer:

OUR DRIVING FORCE:YOUR SUCCESS.