model dv-05 din - steven engineeringmodel dv-05 din rail mount in-line amplifier warranty. honeywell...

Rail Mount In-Line AmplifierModel DV-05 DIN

DESCRIPTIONThese in-line amplifiers feature DIN-rail mount enclosures with

front accessible electrical connections and adjustments. Ampli-

fiers are available for strain-gage transducers.

FEATURES• DIN rail mount

• Unamplified transducer input

• Bridge-based transducer input

• 0 to ±5 V three-wire output with 11 Vdc to 28 Vdc power

• 3 Vdc or 5 Vdc excitation

• RFI, ESD protected

• CE approved

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

2 Honeywell • Sensing and Control

Model DV-05 DIN

PERFORMANCE SPECIFICATIONS

Characteristic Measure

Number of channels 1

Case material Plastic

Mounting 35 mm DIN

Certification CE approved

AMPLIFIER CHARACTERISTICS


Supply voltage 11 Vdc to 28 Vdc

Current draw 60 mA

Zero adjustment range, coarse

±60 %

Zero adjustment range, fine ±10 %

Span adjustment range Switch selectable 0.5 mV/V to 13.3 mV/V

Span adjustment range, fine

±20 %

Linearity ±0.01 %

Output ±5 Vdc

Output current 2 mA

Frequency response (-3 db) dc 7000 Hz with 350 ohm bridge

dc 2500 Hz with 5000 ohm bridge

Rise time (0 % to 90 %) 56 ms with 350 ohm bridge

145 ms with 5000 ohm bridge

Signal-to-noise ratio 66 db

dc power supply rejection ratio

Greater than 110 db

ENVIRONMENTAL SPECIFICATIONS


Temperature, operating -29 °C to 82 °C [-20 °F to 180 °F]

Temperature, storage -40 °C to 93 °C [-40 °F to 200 °F] MOUNTINg DIMENSIONS AND CHARACTERISTICS

TYPICAL SYSTEM DIAgRAM

Not RoHS compliant

TRANSDUCER INTERFACE


Transducer type Bridge-based sensor

Transducer excitation 3 Vdc or 5 Vdc @ 30 mA (short circuit protection)

98,5 mm[3.87 in]

Mating connector

Customer suppliedChart recorderAlarm panelData acquisitionComputerPLC

Power supply

Sensor Model DV-05

OPTION CODES

2-pole filteroption

Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.

58e, 2-pole filter setting

1 Hz 100 Hz3 Hz 300 Hz5 Hz 500 Hz10 Hz 1000 Hz20 Hz 2500 Hz (350 ohm bridge)30 Hz 7000 Hz (5000 ohm bridge)50 Hz


Sensing and Control

Automation and Control Solutions

Honeywell

1985 Douglas Drive North

Golden Valley, MN 55422 USA

+1-815-235-6847

www.honeywell.com/sensing

008813-1-EN IL50 GLO June 2008Copyright © 2008 Honeywell International Inc. All rights reserved.

Model DV-05 DIN Rail Mount In-Line Amplifier

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.

For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]

WARNINgPERSONAL INJURY

•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureofthe product could result in personal injury.

Failure to comply with these instructions could result in death or serious injury.

WARNINgMISUSE OF DOCUMENTATION

•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheach product.



Rail Mount In-Line AmplifierModel DA-05 DIN





• Strain gage transducer input


• 4 mA to 20 mA three-wire output

• 13 Vdc to 28 Vdc power supply

• 3 Vdc or 5 Vdc excitation


• CE approved



Model DA-05 DIN





Mounting 35 mm DIN




Supply voltage 13.5 Vdc to 28 Vdc

Current draw 60 mA


±60 %




±20 %

Linearity ±0.01 %

Output 4 mA to 20 mA three-wire

Frequency response (-3 db) dc 6200 Hz with 350 ohm bridge

dc 2300 Hz with 5000 ohm bridge





90 db




Temperature, storage -40 °C to 93 °C [-40 °F to 200 °F] MOUNTINg DIMENSIONS AND CHARACTERISTICS


Not RoHS compliant




Transducer excitation 3 Vdc or 5 Vdc @ 30 mA (short circuit protection)

OPTION CODES

2-pole filteroption




98,5 mm[3.87 in]


Sensing and Control


Honeywell



+1-815-235-6847



Model DA-05 DIN Rail Mount In-Line Amplifier












Rail Mount In-Line AmplifierModel DV-10 DIN





• Unamplified transducer input


• 0 to ±10 V three-wire output with 15 Vdc to 28 Vdc power

• 5.4 Vdc or 9 Vdc excitation @ 30 mA


• CE approved



Model DV-10 DIN





Mounting 35 mm DIN





Current draw 60 mA


±30 %




-8 to +20

Linearity ±0.01 %

Output ±10 Vdc (three-wire)

Output current 2 mA

Frequency response dc -5000 Hz




Temperature, storage -40 °C to 93 °C [-40 °F to 200 °F]MOUNTINg DIMENSIONS AND CHARACTERISTICS


Not RoHS compliant




Transducer excitation 5.4 Vdc or 9 Vdc @ 30 mA (short circuit protection)

OPTION CODES

2-pole filteroption




98,5 mm[3.87 in]


Sensing and Control


Honeywell



+1-815-235-6847



Model DV-10 DIN Rail Mount In-Line Amplifier












Rail Mount In-Line AmplifierModel DLD-VH DIN



fiers are available for ac-type displacement transducers with

outputs in both Vdc or mA.


• ac displacement transducer input

• 0 to ±5 Vdc or 0 to ±10 Vdc field selectable output with

18 Vdc to 36 Vdc power

• 3 V RMS @ 5 kHz




Model DLD-VH DIN





Mounting 35 mm DIN




Power supply isolation 500 V

Current draw 100 mA


±100 %


Span adjustment range Switch selectable 0.1 VRMS to 15 VRMS input range


±10 %

Linearity ±0.05 %

Output 0 ±5 Vdc or 0 ±10 Vdc (field selectable)

Frequency response (-3 db) 300 Hz




Temperature, storage -40 °C to 93 °C [-40 °F to 200 °F]

MOUNTINg DIMENSIONS AND CHARACTERISTICS


Not RoHS compliant



Transducer type ac displacement transducers

Transducer excitation 3 V RMS @ 5 kHz

98,5 mm[3.87 in]


Sensing and Control


Honeywell



+1-815-235-6847



Model DLD-VH DIN Rail Mount In-Line Amplifier












Rail Mount In-Line AmplifierModel DLD-CH DIN


• ac displacement transducer input

• 4 mA to 20 mA output field selectable output with

18 Vdc to 36 Vdc power

• 3 V RMS @ 5 kHz




fiers are available for ac-type displacement transducers with

outputs in both Vdc or mA.



Model DLD-CH DIN





Mounting 35 mm DIN




Power supply isolation 500 V

Current draw 90 mA


±100 %


Span adjustment range Switch selectable 0.1 VRMS to 15 VRMS input range


±10 %

Linearity ±0.05 %

Output 4 mA to 20 mA

Frequency response (-3 db) 300 Hz







Not RoHS compliant



Transducer type ac displacement transducers

Transducer excitation 3 V RMS @ 5 kHz

98,5 mm[3.87 in]

Model DLD-CH

Customer suppliedChart RecorderAlarm PanelData AcquisitionComputerPLC

Power supply

AC LVDT


Sensing and Control


Honeywell



+1-815-235-6847



Model DLD-CH DIN Rail Mount In-Line Amplifier












Universal Bi-Polar In-Line AmplifierModel UBP

FEATURES• For replacement only, not to be used in new design

• Strain gage sensor amplifier

• ±5 Vdc output

• ±15 Vdc supply voltage

• NEMA 4 housing

• Selectable excitation voltages: 3 V, 5 V, or 10 V @ 70 mA

• Increases signal-to-noise ratio in noisy environments

• Effects of voltage drops in excitation sources are eliminated

• Signals may be sent to the data systems from low impe-

dence sources

DESCRIPTIONThe Model UBP bi-polar amplifier supplies a highly regulated

bridge excitation voltage for the transducer and converts the

millivolt signal of the transducer to a ±5 Vdc signal. The Univer-

sal In-line features two selectable excitation voltages, program-

mable gain settings, a wide adjustment range on the zero, and a

buffered solid-state shunt cal relay for quick calibration.



Model UBP




Case material Plastic or painted Aluminum

Mounting Use #6 or #8 screws



Temperature, operating -15 °C to 71 °C [5 °F to 160 °F]

Sealing IP66 or NEMA 4




Transducer excitation 3 Vdc, 5 Vdc or 10 Vdc @ 70 mA



Supply voltage ±15 Vdc

Current draw 70 mA

Frequency response (-3 db) dc to 5000 Hz


±50 %


Span adjustment range 0.5 mV/V to 10 mV/V, ±25 % fine

Linearity 0.01 % of full scale

Shunt calibration Solid state relay on board

Signal output ±5 Vdc

Output current 1 mA max.



> 110 db



> 110 db

OPTION CODES

2-pole active filter


Filter setting 1 Hz 50 Hz3 Hz 100 Hz5 Hz 300 Hz10 Hz 500 Hz20 Hz 1000 Hz30 Hz



Not RoHS compliant


Sensing and Control


Honeywell



+1-815-235-6847



Model UBP Universal Bi-Polar In-Line Amplifier












Bridge Based Sensor In-Line AmplifierModel UV

DESCRIPTIONThe Model UV amplifier supplies a highly regulated bridge exci-

tation voltage for the transducer and converts the millivolt signal

of the transducer to a ±10 Vdc signal. The Universal In-line

features two selectable exciation voltages, programmable gain

settings, a wide adjustment range on the zero, and a buffered

solid-state shunt cal relay for quick calibration.

FEATURES• Strain gage sensor amplifier

• ±5 Vdc three-wire output

• 3 V or 5 V excitation voltages @ 70 mA

• 11 Vdc to 28 Vdc supply voltage

• NEMA 4 housing




dence sources



Model UV













Transducer excitation 3 Vdc or 5 Vdc @ 70 mA




Current draw 50 mA

Frequency response (-3 dB) dc: 7000 Hz with 350 ohm bridge

dc: 5000 Hz with 5000 ohm bridge




±50 %


Span adjustment range 0.75 mV/V to 13.3 mV/V ±25 % fine adjustment



Output ±5 Vdc

Output current 2 mA max.



> 110 db

OPTION CODES






Not RoHS compliant


Sensing and Control


Honeywell



+1-815-235-6847



Model UV Bridge Based Sensor In-Line Amplifier












Bridge Based Sensor In-Line AmplifierModel UV-10

DESCRIPTIONThe Model UV-10 amplifier supplies a highly regulated bridge

excitation voltage for the transducer and converts the millivolt

signal of the transducer to a ±10 Vdc signal. The Universal In-

line features two selectable exciation voltages, programmable

gain settings, a wide adjustment range on the zero, and a buff-

ered solid-state shunt cal relay for quick calibration.


• ±10 Vdc three-wire output

• 3 V, 5 V, or 10 V excitation voltages @ 70 mA


• NEMA 4 housing




dence sources



Model UV-10













Transducer excitation 3 Vdc, 5 Vdc or 10 Vdc @ 50 mA




Current draw 60 mA






±30 %


Span adjustment range 1 mV/V to 20 mV/V, ±25 % fine



Output ±10 Vdc

Output current 2.5 mA



> 110 db

OPTION CODES






Not RoHS compliant


Sensing and Control


Honeywell



+1-815-235-6847



Model UV-10 Bridge Based Sensor In-Line Amplifier












Bridge Based Sensor In-Line AmplifierModel U3W



• NEMA 4 housing

• Selectable excitation voltages: 3 V or 5 V @ 70 mA

• 4-20 mA analog output




dence sources

DESCRIPTIONThe Model U3W amplifier supplies a highly regulated bridge


signal of the transducer to a 4 mA to 20 mA three-wire current

output signal. The Universal In-line features two selectable exci-

tation voltages, programmable gain settings, a wide adjustment

range on the zero, and a buffered solid-state shunt cal relay for

quick calibration.



Model U3W













Transducer excitation 3 Vdc or 5 Vdc @ 70 mA




Current draw 70 mA






±70 %


Span adjustment range 0.5 mV/V to 6.6 mV/V ±25 % fine adjust-ment



Signal output 4 mA to 20 mA (three-wire)



> 110 db

OPTION CODES






Not RoHS compliant


Sensing and Control


Honeywell



+1-815-235-6847



Model U3W Bridge Based Sensor In-Line Amplifier












Bridge Based Sensor In-Line AmplifierModel U2W



• NEMA 4 or IP66 housing

• Constant voltage mode: 5 Vdc @ 2 mA max. (3K to 10K

Ohm)

• Constant current mode: 0.5 mA with 3 V compliance (2K to

6K Ohm)

• Lightning protection

• 4-20 mA two-wire analog output




dence sources

DESCRIPTIONThe Model U2W amplifier supplies a highly regulated bridge


signal of the transducer to a 4 mA to 20 mA two-wire current

output signal.



Model U2W










Lightning protection Yes




Transducer bridge excitation and resistance

Constant voltage mode 5 Vdc @ 2 mA max.; 3K ohm to 10K ohm

Constant current mode 0.5 mA with 3 V compliance; 2K ohm to 6K ohm




Frequency response 1 kHz @ 2 mV/V

Zero adjustment range ±15 % fine

Span adjustment range Jumper selectable and ±20 % fine adjustment


Signal output 4 mA to 20 mA (two-wire)



Not RoHS compliant

95,76 mm [3.77 in]

93,98 mm [3.7 in]


Sensing and Control


Honeywell



+1-815-235-6847



Model U2W Bridge Based Sensor In-Line Amplifier












Charge AmplifierModel CA2/CA3

DESCRIPTIONCharge-mode piezo-electric transducers require charge ampli-

fiers to convert their output to useful levels. Honeywell in-line

charge amplifiers are versatile and convenient solutions for the

use of charge-mode piezo-electric transducers.

FEATURES• Piezo-electric accelerometer amplifier

• ±15 Vdc or 24 Vdc to 32 Vdc supply

• NEMA 4 housing

• Programmable sensitivity

• ±5 V RMS max. output



Model CA2/CA3

POWER REQUIREMENTS


Input voltage ±15 Vdc or 24 Vdc to 32 Vdc

Input current 20 milliamperes



Sensitivity Programmable (0.05 mV/pc to 6.4 mV/pc)

Input range 780 pc to 100000 pc

Output ±5 V RMS max.

Frequency response, Model CA2

3 Hz to 30 kHz (-3 db)

Frequency response, Model CA3

dc to 30 kHz

Time constant, Model CA2 50 milliseconds

Time constant, Model CA3 2000 seconds

Short circuit protected +output to -output

PHYSICAL CHARACTERISTICS


Size (L x W x H) 9,7 cm x 6,4 cm x 5,6 cm [3.8 in x 2.5 in x 2.2 in]

Temperature, operating 0 °C to 82 °C [32 °F to 180 °F]

Environmental protection Moisture and dust resistant painted aluminum box

Method of connection input Terminal strip inside of box

Sensor connection Miniature coaxial connector

Mounting Recessed screws, outside of the sealed volume



Not RoHS compliant


Sensing and Control


Honeywell



+1-815-235-6847



Model CA2/CA3 Charge Amplifier












IEPE Accelerometer Power SupplyModel CC2

DESCRIPTIONFor use with IEPE-based accelerometers, the Model CC2 is bat-

tery powered with a low battery indicator. The power supply uses

9 Vdc batteries and has an adjustable drive current.

FEATURES• Constantcurrentpowersupply

• UsedwithIEPEaccelerometers

• Adjustabledrivecurrent

• Batteryoracpowered

• 10Voutput


2Honeywell•SensingandControl

Model CC2

POwER REqUIREmENTS SPECIFICATIONS

Characteristic measure

Batteries 9 V alkaline (3)

Batterylife 110hrs@2mA

Low battery indicator LEDlightsatapproximately17.5V

INPUT ChARACTERISTICS SPECIFICATIONS


Current to transducer Adjustable1.5mAto10mA

Input connector Miniaturecoaxial

OUTPUT ChARACTERISTICS SPECIFICATIONS


Gain Unity

Couplingtimeconstant 2seconds(1mOhmload)

Load impedance >100K

Outputconnector BNC

Output 10Vpeaktopeakmax.

PhySICAl ChARACTERISTICS SPECIFICATIONS


Size(LxWxH) 13cmx9,4cmx5,7cm[5.12inx3.7inx2.24in]

Temperature 0°Cto66°C[32°Fto150°F]

mOUNTINg DImENSIONS AND ChARACTERISTICS

TyPICAl SySTEm DIAgRAm

89,91 mm [3.54 in]

154,94 mm [6.1 in]

50,03 mm [1.97 in]

Forreferenceonly

NotRoHScompliant


SensingandControl

AutomationandControlSolutions

Honeywell

1985DouglasDriveNorth

GoldenValley,MN55422USA

+1-815-235-6847



Model CC2 IEPE Accelerometer Power Supply

warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall honeywell be liable for consequential, special, or indirect damages.

Whileweprovideapplicationassistancepersonally,throughourliterature and the Honeywell web site, it is up to the customer to determinethesuitabilityoftheproductintheapplication.

Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.

FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com

wARNINgPERSONAl INJURy



wARNINgmISUSE OF DOCUmENTATION




for Amplified TransducersDC Power Supply

DESCRIPTIONProvides regulated voltages ranging from 10 Vdc to 28 Vdc and

output currents to 600 milliamps. Terminal strip connections

eliminate soldering. Features include short-circuit protection,

encapsulated construction and conservative design aimed at

providing long-term stability. Power supplies may be used in

series. No derating or heat sinking required.

FEATURES• Regulated

• Miniaturesize

• Terminal-stripconnection

• Long-termstability

• Short-circuitconstruction



DC Power Supply



Input voltage 105Vacto125Vac,47Hzto420Hz,single phase

Output specifications see order codes table

Output voltage trim adjustment

Outputs are factory set to ±1 % of nomi-naloutputvoltage.Singleoutputmodelsmay be trimmed to the nominal output voltage with an external trim resistor

Polarity Either positive or negative terminal of a single output module may be grounded. Dual output modules have a positive/common/negative output terminal con-figuration

Impedance 0.07ohmat1kHz(approx.)0.2ohmat10kHz(approx.)

Regulation,line ±0.05 %

Regulation,load ±0.1 %

Ripple 1mVRMS

Optional 230 Vac input For operation on an input of 230 Vac, 46 Hzto420Hz



Temperature, ambient operating

32°Cto66°C[0°Fto150°F]

Temperature, storage -55°Cto85°C[-67°Fto185°F]

Temperature error 0.008 % full scale/°F nominal

MOUNTINg DIMENSIONS AND ChARACTERISTICS

For reference only

NotRoHScompliant


SensingandControl


Honeywell



+1-815-235-6847



DC Power Supply for Amplified Transducers

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall honeywell be liable for consequential, special, or indirect damages.


Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.

FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]








AC Carrier or DC Strain Gage Conditioner Indicator

Model 7541

DESCRIPTIONThese advanced instruments provide engineering unit display

of a strain gage (mV/V) input and a frequency input. They also

compute power and perform 21 functions including limit checks,

tare, hold and max./min. capture. You needn’t write code or add

hardware to be up and running a productive test.

The alphanumeric readout can display measured and computed

data, units of measure, and test status. During setup, it guides

you with English language prompts. There are no manual adjust-

ments. To calibrate, enter the full scale value in engineering units

and auto-cal takes over. Provides 0.01 % (max.) resolution and

±5 V and/or ±10 V analog outputs at full scale. The keyboard ac-

cesses measured data, held data, max./min. data, data spread,

limit status, and/or I/O status without disruption. Password pro-

tection may be used, if needed.

FEATURES• Maybecalibratedintwodirections(clockwiseandcounter-

clockwise or tension and compression)

• Fast,rock-solidreadingswithhighnoiseimmunity-2000

samples/sec for torque, head, or drawbar force input - 1 ms

response for speed

• Oneortwochannelinput

• Six-digitengineeringunitwithlegendsand0.01%resolu-

tion max.

• RS-232,RS-422,RS-485serialcommunication

• Auto-scaled±5Vand/or±10Vanalogoutputs

• Nopots,batteries,fans,maintenance,orexternalpower

supplies

• Excitation:accarriermodels,3.28kHz,3Vrms;dcmodels,

5 V or 10 V dc, user selectable

• CEapproved

fix other pages with ac or dc



Model 7541

GENERAl SPECIFICATIONS


Straingageinput Any80ohmto2Kohmtransducer,di-rectlywiredortransformercoupled.4,6,or 7 wire circuits are accommodated

Transducer excitation, ac models

3Vrms,3.28kHz±0.01%sinewave.Regulatedandshortcircuitprotected

Transducer excitation, dc models

5 V or 10 V dc, user selectable, regu-lated

Sensitivity 1.0mV/Vto4.5mV/Vwith50%over-range;automaticallyscaled

Input resistance 100mohminparallelwith33pF

Automaticnull InPhase:±10%offullscale(with50%overrange),±60%offullscale(with0%overrange).Quadrature:±1mV/V

Autocalibration Dual polarity shunt calibration with provi-sionforCALresistorfeedback

Spurioussignalrejection 60Hz:120dBcommonmode,100dBnormalmode.Carrierquadrature:60dB

Anti-aliasfilter 200Hz,7-poleBesselresponsefilter

Low-passfiltering Four-poleBesselresponsedigitalfilterwith11cutofffrequenciesfrom0.1Hzto200Hzin1-2-5steps

ENVIRONMENTAl SPECIFICATIONS


Temperatureeffects,zero ±0.001%offullscale/°Fmax.

Temperature effect, span ±0.001%offullscale/°Fmax.

Frequencyinput Anyunidirectionalorbidirectional(quadrature) source including self-generatingandzerovelocitymagneticpickups, optical encoders, flowmeters, etc. When used with bidirectional sen-sors, the conditioner outputs both direc-tion and magnitude

Input impedance and configuration

Differential or single ended inputs. 100 kohm differential, 50 kohm single ended

Input threshold (keypad selectable)

10, 20, 50, 100 or 200 mV pk-pk (be-tweeninputs)orTTL

Maximumvoltage ±130Vdcor130Vrms

Input signal bandwidth 0.001kHzto200kHz(10mVto200mVpk-pkthreshold)0.001kHzto400kHz(TTLthreshold)

Display ranges and resolution

Rangeless(useanyfullscaleengineer-ing unit value) with 50 % overrange. Resolutionis0.01%offullscale

Lowpassfilter(keypad selectable)

20kHz(-3dB)ornone(thisfilterisnotavailableforTTLinputs)

Responsetime Greaterof:1ms,typ(2msworstcase)or the input pulse length

Commonmoderejection 80dB(60Hz),55dB(0kHzto10kHz)

Lowpassfilteringofsampled data

Unfilteredorfour-poleBesselfilter.Cut-offfrequenciesfrom0.1Hzto100Hzin1-2-5 steps

Overall accuracy 0.01%offullscale@25°C[77°F],0.015%offullscale@5°Cto50°C[41°Fto122°F]

Excitation supplies 12V@[email protected](currentlimitandovervolt-age (fuses) protected

Maximumtransducercable length

500 ft, except 200 ft for 100 ohm or lower strain gage transducers

ElECTRICAl SPECIFICATIONS


Signal-to-noiseratio1 With1/10/100/200Hzfilters86/76/66/62dB@1mV/Vfullscaleand86/80/72/66dB@5mV/VFS

Resolution 0.01 % of full scale

Overall accuracy @ 25°C[77ºF]

0.02 % of full scale, worst case.

DISPlAY SPECIFICATIONS


Systemdisplay Twolineby16alphanumericcharac-ters,each0.2inwideby0.3inhigh.BacklitLCDwithadjustablecontrast

Views Selecteithertwochannels,oneChannelwith limit status or one channel with I/O status

Data displayed Selectfromcurrent,max.,min.,spread,held data and tare value

Data format Engineering units with six digits (1-2-5 format) and five character, upper or lower case, user-entered legend/de-scriptor

SYSTEM RESPONSE (PER ChANNEl) SPECIFICATIONS


Data samp. & max./min. update rates

2000Hz(hardwarechannels),50Hz(CH3calculation)

Limitcheckingrate 1000Hz(hardwarechannels),50Hz(CH3calculation)

LogicI/Oresponsetime 1ms(hardwarechannels),20ms(CH3calculation)

Update rate for each analog output

1000Hz


Honeywell•SensingandControl3

AC Carrier Strain Gage Conditioner Indicator

MEChANICAl SPECIFICATIONS


Size(WxHxD) 165,1mmx73,66mmx220,98mm[6.5inx2.9inx8.7in]

Weight 3lb

Operating temperature 5°Cto50°C[41°Fto122°F]

Input power 90Vacto250Vac,50/60Hz@25VA,max.Two2A/250Vfuses,linefilterandrear power switch

SYSTEM SPECIFICATIONS


Systemcontrol AllI/Ofunctionscanbeorderedinanycombination. The pattern function adds ANDingcapabilities

Input actions/channel Logicinputs,outputsandinternalMatrixsignalscontrolthefollowingactions:tare, clear tare, hold, clear hold, reset max./min., clear latched limits, check limits,domax./mins.,apply+CAL

Output events/channel The following events drive logic outputs andinternalMatrixsignals:HIlimit,NOTHIlimit,INlimit,NOTINlimit,LOlimit,NOTLOlimit,atmax.,NOTatmax.,atmin.,NOTatmin.

Three user-defined patterns Patterns of logic inputs, outputs and MatrixsignalsdriveLogicoutputsandinternalMatrixsignals

LimitChecking EachchannelhasaHIandLOlimitwhich may be latched or unlatched, absolute or signed, and with or without hysteresis.Selecteithercurrent,max.,min. spread or held data for limit checking.Limitviolationsonanyorallchannels can be set to trigger back-light flashing in any of the display view modes

lOGIC INPUTS SPECIFICATIONS


FourLogicinputs Each with programmable destination, protectedto±130Vdcor130Vrms

FourLogictype TTLcompatible,ScmittTrigger,low-truewith47kohmpull-up.Inputcurrentis-100µA@0V

SixLogicoutputs Each with programmable source, short circuit (current and thermal limits) and overvoltage (fuse) protected.

SixLogictype Open collector, low-true. Operating @ 24V(max.)and0.3Amaxsinkcurrent

External +5 Vdc power (on I/O conn.)

250mA,shortcircuit(currentlimit)andovervoltage (fuse) protected.

Serialcommunicationport (selectableasRS232,RS422orRS485)Supports32devicesonRS485portand1deviceonRS232/422

Baudrate 300to38400.Maximumcablelength:4000ft(RS422/RS485),50ft(RS232)

120 ohm terminal resistors (RS485)

UserselectableforRXDandTXD

RS422/485transceivers Slew-ratelimited,shortcircuitprotected(current and thermal limits)

RS232drivers Shortcircuitprotected(currentlimit)

SerialI/Os Use a nine-pin D connector. ±15 kV ESDprotectedandfloat(100kohm)with respect to earth ground

Commands Controlofallmodes,settingsandmeas-urements

Non-volatilememorystorage settings

EEPROM,batteriesarenotused

Dual analog outputs Each assignable to any of the three channels are short circuit (current limit) and overvoltage (fuse) protected

Output impedance/min. load resis.

< 1 ohm/10 kohm

Fullscale ±5Vor±10V(userselectable).Resolu-tionis2mV@±5Vfullscaleor4mV@±10 V full scale

Overrange ±8.2V@±5Vfullscaleor±13.5V@±10 V full scale

Nonlinearity ±2mV@±5Vfullscaleor±4mV@±10 V full scale

Overall error

(worst case, incl. temp. effects)

±5 mV @ ±5 V full scale or ±10 mV @ ±10 V full scale

Filter 100Hz,5poleBesselresponselowpass filter


SensingandControl


Honeywell



+1-815-235-6847



Model 7541 AC Carrier Strain Gage Conditioner Indicator

Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeing free of defective materials and faulty workmanship. Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorder acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywellduringtheperiodofcoverage,Honeywellwillrepairor replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall honeywell be liable for consequential, special, or indirect damages.

While we provide application assistance personally, through our literatureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.

Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.

FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Email inquiries to [email protected]

WARNINGPERSONAl INJURY



WARNINGMISUSE OF DOCUMENTATION



Notes

1.Theratioexpressedindecibels(dB),offullscale(FS)tonoisespread.Measurementsaremadeforaone-minuteintervalusinga350ohmbridge.

2.Bothexcitationvoltagescanbeusedsimultaneouslywiththefollowingrestrictions:4.8x(12Vcurrent)+(5Vcurrent)<700mA;12Vcur-rent<125mA;5Vcurrent<250mA.

3.Appliestostraingagechannelonly.Frequencymeasurementisabsolute with enhanced accuracy and only requires user engineering unit scale.

4.Specificationissubjecttochangewithoutnotice.


Transducer Display and Signal Conditioning Unit

Model SC1000/SC2000

DESCRIPTIONThe SC series models are self-calibrating microprocessor-

based transducer signal conditioners when used with sig mod

equipped transducers. Indicators are available with several dif-

ferent types of input channels and output channels. When used

with unamplified strain gage transducers that have the signature

calibration module installed, these instruments will completely

self calibrate zero, span, decimal point, and engineering units

automatically.

Input channels are available for a variety of transducers. Each

input channel includes an excitation power supply and either an

isolated voltage or isolated current analog output.

• Unamplifiedpressureorload

• Pressureorloadwithinternalvoltageamplifiers

• Pressureorloadwithinternalorexternaltwo-wire

current amplifiers

• ac/acdisplacementtransducer

• dc/dcdisplacementtransducer

•RTDtemperatureprobes(Pt100)

AvailableoutputchannelsfortheSC2000include:

• Contactrelaysforthefourstandardlimitsoradditionallimits

(max.16limits/chassis)

• Isolateddigital-to-analogvoltage(±5Vdcor0Vdcto10Vdc)

orcurrent(4mAto20mA)

In addition to the physical input and output channels, up to

seven virtual channels can be configured to assist in many po-

tential applications.

Four channel chassisThemodelsSC1000andSC2000canholduptofourphysi-

calchannelsintheir3/8DINAluminumbench-topchassis.A

bright,dual-line16-characterdisplaycandisplay5,6or7

numeric digits; simply press a button to select the next channel

to be viewed. If configured for split-screen operation, up to four

channelvaluescanbedisplayedatthesametime.TheSC2000

includesfouropencollectorlimit(alarm)outputspluspeakand

valley detection.

FEATURES• Onetofourchannels

• ±6digitdisplay

• “Sigcal”autosetup

• Upto800Hzfrequencyresponse,fieldselectable

• Pressure,load,displacementtransducer,voltage,current,

strain gage based sensor input

• Alarmoutputs

• CEapproved



Model SC1000/SC2000



Model SC1000/SC2000

Numberofphysicalchannels

1to4

Numberofvirtualchannels 1to7

Case material Aluminum

Form factor 3/8DIN

Mounting Bench(standard)

Size(WxHxD) 142,24mmx71,12mmx222,25mm[5.6inx2.8inx8.75in]

Weight 1,81kg[4lb]

COMMUNICATIONS SPECIFICATIONS


Serial setup and output RS-232/RS-485

Isolation 500V

Max. baud rate 38400

POwER SPECIFICATIONS


Standard ac powered 100Vacto230Vac,47Hzto63Hz

Excitation drive 120mAmax.

DISPlAy SPECIFICATIONS


Numberofdisplays 1

Numberoflines/display 2

Numberofcharacters/line 16

Scaling Automatic or manual setup

Max. display count 9999999

Decimalpointselection 0to5

Displaytype Vacuum/Fluorescent

ENvIRONMENTAl SPECIFICATIONS



Temperature, operating 4°Cto41°C[40°Fto105°F]

SPECIAl FEATURES (SC2000 ONly) SPECIFICATIONS


Limits setup Front panel

Limits output, standard Open-collector

Limits output, relay output channel

Contact relays

Limits quantity 4std.,16max.(contactrelays)

Peak/valleyholdoninputchannels

Yes

Digital,isolatedcontrolinputs

4

Approvals CEapproved(exceptvehiclepoweredunit)

Interfaces Signature calibration

INPUT AMPlIFIER CARDS

NotRoHScompliant

Input Strain gage millivolts

High level volts/mA

RTD mil-livolts

ac/ac dis-placement transducer

Transduc-er type

Unamplifiedsensors

Amplified pressure or load,dc/dc dis-placement transducer

Platinum100ohm,alpha = 0.00385

ac/acdis-placement transducer

Ranges* 0.5mV/Vto11mV/[email protected]/Vto5.5mV/V@10V

±5Vdcor±10Vdc,4mAto20mA

-200°Cto800°C[-328°Fto1472°F]

0.1VRMSto15VRMS

Frequency response

See table below

See table below

See table below

See table below

Resolu-tion

See table below

See table below

See table below

See table below

Calibra-tion type

Shunt; mV/V;2-,3-,or5-pointknownload

Shunt; 2-, 3-,or5-pointknownload

2-, 3-, or 5-pointknownload

2-, 3-, or 5-pointknownload

Trans-ducer excitation

5Vdcor10Vdcwithsense

±15Vdc,28Vdc,or12Vdc

10Vdc 3Vac@3kHz

Push but-ton 100 % tare

Yes Yes N/A Yes

Push but-ton shunt test

Yes Yes N/A Yes

*Rangesarefieldprogrammable,exceptforRTDinput

All input cards include non-isolated, open collector control inputs that can be field configuredforanyoneofthefollowingfunctions:1)trackhold,2)peak/valleyhold,3)tareon,and4)tareoff.




MOUNTING DIMENSIONS AND CHARACTERISTICS

TyPICAl SySTEM DIAGRAM

FlExIblE AND ExPANDAblE PlATFORM OPTIONS

For reference only

Resolution (counts) (not including min. 10 % overrange/underrange capability)

Fre-quency response (Hz) field selectable

Step response (ms) typi-cal

Strain gage/RTD

High level ac/ac displace-ment trans-ducer

2(fastmode)

40 ±50000 ±50000 ±25000

2 440 ±50000 ±50000 ±25000

8 110 ±25000 ±25000 ±15000

16 55 ±20000 ±25000 ±10000

32 28 ±10000 ±20000 ±10000

50 16 ±5000 ±15000 ±5000

100 8 ±5000 ±10000 ±5000

250 3 ±2000 ±10000 ±2000

500 2 ±2000 ±4000 ±2000

800 2 ±2000 ±2500 ±2000

OUTPUT

Output Strain gage millivolts

High level volts/mA

RTD mil-livolts

ac/ac displace-ment trans-ducer

voltage range (field selectable)

5Vdc,±5Vdc,10Vdc,±10Vdc




Current range

4mAto20mA

4mAto20mA

4mAto20mA

4mAto20mA

Source Any chan-nel

Any chan-nel

Any chan-nel

Any chan-nel

Isolation 500V 500V 500V 500V

Resolution 13bits 13bits 13bits 13bits

Frequency response

Same as input

Same as input

Same as input

Same as input



Model SC1000/SC2000

Front panel or remote tare Flexible user setup

mv/v or shunt calibration or five-point calibration Remote setup

User selectable display options Different alarm configurations

User selectable filtering Group and individual channel remote inputs

SC2000 CAPAbIlITIES




Open collector alarms or via optional four-relay cards Optional math channel can act like PlC

Sig cal auto setup Analog and digital outputs

SC2000 CAPAbIlITIES


Sensing and Control


Honeywell



+1-815-235-6847



Model SC1000/SC2000 Transducer Display and Signal Conditioning Unit

warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecific warranty details. If warranted goods are returned to Honeywellduringtheperiodofcoverage,Honeywellwillrepairor replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.


Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.

For more information about Sensing and Control products, visit www.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com

wARNINGPERSONAl INJURy



wARNINGMISUSE OF DOCUMENTATION




Portable Transducer Display and Signal Conditioning Unit

Model SC2001








automatically. The Model SC2001 includes all the features of the

SC2000 in a portable, rugged enclosure.







current amplifiers



•RTDtemperatureprobes(Pt100)

Available output channels for the SC2001 include:

• Contactrelaysforthefourstandardlimitsoradditionallimits

(max.16limits/chassis)



In addition to the physical input and output channels, up to

seven virtual channels can be configured to assist in many po-

tential applications.

Four channel chassisThe model SC2001 can hold up to four physical channels in

their3/8DINAluminumbench-topchassis.Abright,dual-line

16-characterdisplaycandisplay5,6or7numericdigits;simply

press a button to select the next channel to be viewed. If con-

figured for split-screen operation, up to four channel values can

be displayed at the same time. The SC2000 includes four open

collectorlimit(alarm)outputspluspeakandvalleydetection.

FEATURES• PortablemountingforSC2000

• Vehiclepoweroracpowerinput

• Easyhookupofsensors

• Pressure,load,displacementtransducervoltagecurrent,


• Convenientcablestorage

• CEapproved

insertcorrectpicturefromIN-2

product in case


Sensing and Control


Honeywell



+1-815-235-6847



Model SC2001 Transducer Display and Signal Conditioning Unit



Model SC2001


Form factor Suitcase

Mounting Portable

Size(WxHxD) 33,7cmx29,2cmx23,4cm [13.25inx11.5inx9.2in]

MOUNTING DIMENSIONS AND ChARACTERISTICS

For reference only

Warranty. Honeywell warrants goods of its manufacture as beingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’s standard product warranty applies unless agreed tootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall honeywell be liable for consequential, special, or indirect damages.



For more information about Sensing and Control products, visit www.honeywell.com/sensingorcall+1-815-235-6847Email inquiries to [email protected]







See SC2000 data sheet for specification of: display, environmental, spe-cial features, communications, power, input amplifier cards, capabilities, options, and system diagram.

NotRoHScompliant



Model SC3004

DESCRIPTIONThe SC series models are self-calibrating microprocessor-based

transducer signal conditioners. Indicators are available with

several different types of input channels and output channels.

When used with unamplified strain gage transducers that have

the signature calibration module installed, these instruments will

completely self calibrate zero, span, decimal point, and engi-

neering units automatically.






• Pressureorloadwithinternalorexternaltwo-wirecurrent

amplifiers



• RTDtemperatureprobes(Pt100)

AvailableoutputchannelsfortheModelSC3004include:

• Contactrelaysforthefourstandardlimitsoranadditionalfour

limitspercard,upto16limits



In addition to the physical input and output channels, up to eight

virtual channels can be configured to assist in many potential

applications.

Fourteen channel chassisModelSC3004canholdupto14physicalchannelsinits19in,

2Urack-mountenclosure.Uptothreequad-linedisplayscanbe

installedwhichwilldisplaythevaluesofupto12channels.Split

displays can increase display capacity.

FEATURES• Oneto14channels

• ±6digitdisplay

• “Sigcal”autosetup

• Upto800Hzfrequencyresponse,fieldselectable

• Pressure,load,displacementtransducer,voltage,current,


• Alarmoutputs

• CEapproved



Model SC3004



Model SC3004

Number of physical channels

1to14

Number of virtual channels 8


Form factor 2Urack

Mounting Rackorbenchwithincludedrubberfeet

Size(WxHxD) 482,6mmx88,9mmx222,25mm[19inx3.5inx8.75in]

Weight 4,99kg[11lb]



Number of displays 1,2,or3(max.12channeldisplay)

Numberoflines/display 4

Numberofcharacters/lines 20

Scaling Automatic or manual setup


Decimalpointselection 0to5

Displaytype Vacuum/Fluorescent

SPECIAl FEATURES SPECIFICATIONS


Limits setup Front panel

Limits output, standard Open-collector

Limits output, relay output chan.

Contact relays

Limitsquantity 4std.,16max.(contactrelays)

Peak/valleyholdoninput chan.

Yes

Digital,isolatedcontrolinputs

4

Approvals CE approved

COMMUNICATIONS SPECIFICATIONS


Serial setup and output RS-232/RS-485

Isolation 500V

Max. baud rate 38400



Standard ac powered 100Vacto230Vac,47Hzto63Hz

Excitation drive 400mAmax.





INPUT AMPlIFIER CARDS

NotRoHScompliant

Input Strain gage mil-livolts

High level volts/mA

RTD mil-livolts


Transduc-er type

Unamplifiedpressure or load sen-sors

Amplified pressure or load,dc/dcdisplace-ment trans-ducer

Platinum100ohm,alpha = 0.00985

ac/acdis-placement transducer

Ranges* 0.5mV/Vto11mV/[email protected]/Vto5.5mV/V@10V


-328°Fto1472°F

0.1VRMSto15VRMS

Frequency response

See table on page 3

See table on page 3

See table on page 3

See table on page 3

Resolu-tion

See table on page 3

See table on page 3

See table on page 3

See table on page 3

Calibra-tion type

Shunt; mV/V;2-,3-,or5-pointknownload

Shunt; 2-,3-,or5-pointknownload

2-,3-,or5-pointknownload


Transduc-er excita-tion

5Vdcor10Vdcwithsense

±15Vdc,28Vdc,or12Vdc

10Vdc 3Vac@3kHz

Push button 100 % tare

Yes Yes N/A Yes

Push button shunt test

Yes Yes N/A Yes

*Rangesarefieldprogrammable,exceptforRTDinput

All input cards include non-isolated, open collector control inputs that can be field configuredforanyoneofthefollowingfunctions:1)trackhold,2)peak/valleyhold,3)tareon,and4)tareoff.




MOUNTING DIMENSIONS AND CHARACTERISTICSOUTPUT


FlExIblE AND ExPANDAblE PlATFORM

For reference only


Fre-quency response (Hz) field selectable


Strain gage/RTD

High level ac/ac displace-ment trans-ducer

2(fastmode)

40 ±50000 ±50000 ±25000

2 440 ±50000 ±50000 ±25000

8 110 ±25000 ±25000 ±15000

16 55 ±20000 ±25000 ±10000

32 28 ±10000 ±20000 ±10000

50 16 ±5000 ±15000 ±5000

100 8 ±5000 ±10000 ±5000

250 3 ±2000 ±10000 ±2000

500 2 ±2000 ±4000 ±2000

800 2 ±2000 ±2500 ±2000

Output Strain gage mil-livolts

High level volts/mA

RTD mil-livolts


voltage range (field se-lectable)





Current range

4mAto20mA

4mAto20mA

4mAto20mA

4mAto20mA

Source Any chan-nel

Any chan-nel

Any chan-nel

Any chan-nel

Isolation 500V 500V 500V 500V

Resolution 13bits 13bits 13bits 13bits

Frequency response

Same as input

Same as input

Same as input

Same as input



Model SC3004SC3004 CAPAbIlITIES



User selectable display options Different alarm configurations

User selectable filtering Group and individual channel remote inputs



Transducer Display and Signal Conditioning UnitSC3004 CAPAbIlITIES

Open collector alarms or via optional four-relay cards Optional math channel can act like PlC

Sig cal auto setup Analog and digital outputs


Sensing and Control


Honeywell



+1-815-235-6847



Model SC3004 Transducer Display and Signal Conditioning Unit

warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecific warranty details. If warranted goods are returned to Honeywellduringtheperiodofcoverage,Honeywellwillrepairor replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.



For more information about Sensing and Control products, visit www.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com








Panel Meter - Strain Gage Transducer Indicator

Model 7558

DESCRIPTIONThe Model 7558 series of digital indicators provide enhanced

accuracy, ease of use, and improved resolution of measurement.

These cost-efficient instruments provide a user-selectable dc

excitation voltage to drive strain-gage-based transducers.

These standard meters can be made more powerful through

the selection of optional features that provide the capability to

control external devices, and offer digital communication with

computers.

FEATURES• Strain-gage-based,Wheatstone-bridgetransducer

• Five-digitLEDdisplay

• 1/8DINsize

• Userselectableresolution

• NEMA4X/IP65construction

• Isolatedanalogoutput

• Min.andmax.peakdetection

• 16-pointlinearization

• CEapproved

OPTIONS• Duallimitrelays

• RS232orRS485isolatedserialinterface

• DeviceNetsoftware

• PCsoftwareformeterconfiguration



Model 7558



A/Dconverter 16-bitresolution

Resolution Selectableby1,2,5,or10counts

Range -19999to19999

Decimalpoint Selectableposition

A/Dconversionrate 20readings/sec

Updaterate 1to20updates/sec

SENSOR INPUT SPECIFICATIONS


Range ±24mVdcor±240mVdc

Accuracy ±0.02%ofreading

Impedance 100mohm

POwER SUPPly SPECIFICATIONS


ac supply voltage 85Vacto250Vac,50Hz/60Hz,15VA

dc supply voltage 11Vdcto36Vdc,11W

USER CONFIgURAblE lINEARIzATION SPECIFICATIONS User-definedlinearizationfunctionasa16-pointpiece-wiselinearapproximation

ANAlOg OUTPUT SPECIFICATIONS


Voltage 0Vdcto10Vdc

Impedance 500ohm

Accuracy ±0.17%fullscale(18°Cto28°C[64°Fto82°F])

DUAl lIMIT RElAyS SPECIFICATIONS


Type TwoformCrelays

Isolation 2000Vrmsfor1minute

Contactrating Totalcurrentwithbothrelaysenergized<5A

RS232 OR RS485 SERIAl OUTPUT SPECIFICATIONS


Datatype 7/8bits

Voltagelevel 50V

Baud rate 19200

Isolation 500Vrms

Addressunits 99max.

Parity No,oddoreven


ORDER CODES

Forreferenceonly


SensingandControl


Honeywell



+1-815-235-6847



Model 7558 Panel Meter - Strain Gage Transducer Indicator

warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairor replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall honeywell be liable for consequential, special, or indirect damages.

Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.

Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.





wARNINgMISUSE OF DOCUMENTATION




Process Monitor and ControllerModel 7554

DESCRIPTIONThe Model 7554 is a portable process monitor and control instru-

ment designed to work with Honeywell’s Auto-ID transducers (for

example, Model 1254) for plug-and-play operation.

FEATURES• Continuousprocessmonitoring(tracking)

• Threepeakrecordingfunctions

• Tworecordfunctions(withmultiplesamplingratesfrom1Hz

to10kHzandstorageforupto8000datapoints)

• Threeprocesscontroloutputsignals(forhigh,low,and

target occurrences)

• RS-232output

• Storagecapabilityforupto8000peakreadings

• Fourlogoperationfunctions(viewing,uploading,printing,

and erasing)

• Selectableengineeringunits

• Menulockingfeature

• Automaticpower-down(whensensorisnotpluggedin)

• RechargeableNi-Cadbatteries

• Graphicuserinterfacesoftwareavailable(consultfactory)

• OptionalsimultaneousangleorRPMmeasurements


SensingandControl


Honeywell



+1-815-235-6847



Model 7554 Process Monitor and Controller

SPECIFICATIONS


Digits Five(withnodecimal)

Height of digits 6,35mm[0.25in]

Samplingrates,track 4Hz

Samplingrates,peak 5kHz

Samplingrates,record Selectableupto10kHz

Frequencyresponse -3dBat1000Hz

Accuracy max. error = 0.05 % of full scale

SENSOR INTERFACE SPECIFICATIONS


Max. input and full scale ±4.5mV/V

Polarity Bi-polar

Bridgeexcitation 7Vsupplied

Bridgeimpedance(min.) 120

D ata output 232portASCII,9600baud,8-N-1

Control/limitoutputs Opencollector

Analog output 0Vdcto2.4Vdc(1Vdc@2mV/V)

Dimensions (W x D X H) [152,4mmx203,2mmx44,45mm]6.0inx8.0inx1.75in

POWER SPECIFICATIONS


ac (adapter supplied) 115Vac

Batteries 9.6Vinternal/rechargeable

Warranty. Honeywell warrants goods of its manufacture as beingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywellduringtheperiodofcoverage,Honeywellwillrepairor replace, at its option, without charge those items it finds defective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

Whileweprovideapplicationassistancepersonally,throughourliterature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.

Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.


WARNINGPERSONAL INJURY







Demodulator for AC Transducer/Displacement Transducers

Model DM

DESCRIPTIONModel DM, for carrier transducers, is a low-cost bench, panel or

rack-mounted instrument which contains a power supply, signal

conditioner, amplifier (Bipolar 5 V output) and digitizer. The 4

1/2-digit LED display features bright, easy-to-read 14,2 mm [0.56

in] high characters. The compact 1/8 DIN size case measures

9,7 cm W x 4,8 cm H x 13,2 cm D [3.8 in x 1.9 in x 5.2 in]. Wires

easily attach to the rear connector using screw terminals. The

Model DM features a 5 kHz drive supply for the transducer, a

stable signal amplifier and a novel demodulation technique that

produces an enhanced accuracy result.

FEATURES• Used with displacement transducers

• 4 1/2 digit LED display

• 3 conversions per second



Model DM

PHYSICAL SPECIFICATIONS


Weight 0,9 kg [2 lb]

Mounting Bench, rack or panel

Case size (standard) 1/8 DIN

Case material Noryl plastic

Input/output connector Removable with screw terminals






Not RoHS compliant



Transducer excitation 3 VRMS @ 5 kHz

Type of inputs accepted ac, displacement transducer, VRT

Input gain range < 1 to 300

Calibration methods Manual displacement

Noise and ripple < 300 microvolts

Transducer minimum im-pedance

7 ohm

ELECTRICAL SPECIFICATIONS


Number of characters displayed

4 1/2

Conversions per second 3

Power requirements, standard

115 Vac @ 5 watts

Power requirements, optional

220 Vac, 12 Vdc

Scaling 0-19999

Scaling method Zero and span adjustment

Polarity indication Yes

Decimal point selection Jumper (non-solder)

Display size 14,2 mm [0.56 in]

Overrange indication Flashing display

Display resolution 1/20000 max.

Digital display LED

Analog output ±5 Vdc

Amplifier output impedance < 2 ohm

Accuracy ±0.2 % full scale

Amplifier frequency re-sponse

300 Hz

Common mode rejection 60 db

Scan adjustment, fine > ±15 %

Scan adjustment, coarse > ±80 %

Zero adjustment, fine > ±5 %

Zero adjustment, coarse > ±20 %

Short circuit protected Yes

OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.

Alarm outputs 58a. Hi-lo limits

Display options 58c. Peak/hold58d. Track/hold

Power supply 110 Vac60a. 220 Vac60c. Battery powered (12 Vdc)

Front panel 51d. Custom front panel

Mounting options 51a. Rack mount adapter

95,25 mm[3.75 in]

96,52 mm[3.8 in]

95,25 mm[3.75 in]

Accessories and options dimensions

AA924Bench mountbracket


Sensing and Control


Honeywell



+1-815-235-6847



Model DM Demodulator for AC Transducer

TYPICAL SYSTEM DIAgRAM Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.










FLExIbLE PLATFORM

Reset feature

Mounting optionsPanel mount (standard)Bench mount bracket (AA924)

Peak/hold featureSignal conditioning options(58c.) Peak/hold (not available with alarm or track/hold option(60a.) 220 Vac(60c.) 12 Vdc powered


Digital Display/Signal ConditionerModel GM-A

DESCRIPTIONThe GM-A is a cost-efficient digital readout that works with

amplified (0 V to 5 V or 4 mA to 20 mA) transducers or transmit-

ters. This unit supplies power to the sensors. Two-wire current is

user jumper selectable for use with two-wire current transducers.

Separate power supply required for three-wire current use. Not

for use with intrinsically safe applications utilizing a barrier.

FEATURES• Highlevel(amplified)transducerinput

• 41/2digitLEDdisplay

• Large14,2mm[0.56in]readout

• Highspeedanalogoutput

• Transducercurrentdrive30mA(max.)



Model GM-A



Temperature,storage -29°Cto93°C[-20°Fto200°F]

Temperature,operating 0°Cto54°C[32°Fto130°F]




41/2

Powerrequirements,standard

115Vac@5W

Powerrequirements,optional

220 Vac

Conversionspersecond 3



Decimalpointselection Jumper (non-solder)

Displaysize 14,2mm[0.56in]

Overrangeindication Flashingdisplay

Displayresolution 1/20000max.

Digitaldisplay LED

Analog output ±5 Vdc


Accuracy ±0.03%

Amplifier frequency response

250Hz

Coarsezeroadjustment ±40%



Weight 1kg[2.25lb]

Mounting Bench,rackorpanel(panelmountincluded with unit)

Casesize(standard) 1/8DIN

Casematerial Noryl plastic

Input/outputconnector Removablewithscrewterminal


Power supply110Vac60a.220Vac

Front panel 51d.Customfrontpanel

Mounting options

51a.Rackmountadaptor51c.NEMAenclosure

NotRoHScompliant



Digital Display/Signal Conditioner


TYPICAL SYSTEM DIAgRAMFLExIbLE PLATFORM

COMPREHENSIVE SIgNAL CONDITIONINg

ACCESSORIES AND OPTIONS DIMENSIONS

Forreferenceonly


SensingandControl


Honeywell



+1-815-235-6847



Model GM-A Digital Display/Signal Conditioner

Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorder acknowledgement or consult your local sales office for specificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.


Specifications may change without notice. The information we supplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.









Digital Display/Signal ConditionerModel GM

DESCRIPTIONThe GM is a versatile full function signal conditioner, amplifier

and power supply that works with unamplified mV/V transduc-

ers. It also provides shunt calibration (R-cal) which enables the

system to be setup without using an expensive primary stimulus

(done at no extra charge at the factory if the readout and trans-

ducer are purchased at the same time). A full range of options

like peak/hold**, track/hold and dual limits are available.

FEATURES• Strain-gage/bridge-based transducer input

• 4 1/2 digit LED display

• Large 14,2 mm [0.56 in] readout

• High speed analog output (up to 27 kHz)

*Optional 56a requires 1/4 DIN enclosure

**Bleed-off rate: <0.01 % of full scale



Model GM



Weight 1 kg [2.25 lb]

Mounting Bench, rack or panel (panel mount included with unit)

Case size (standard) 1/8 DIN

Case material Noryl plastic

Input/output connector Removable with screw terminals






Not RoHS compliant



Input signal 1 mV/V to 5 mV/V or 5 mV/V to 50 mV/V (optional)


4 1/2

Power requirements, standard

115 Vac @ 5 W

Power requirements, optional

12 Vdc, 220 Vac

Conversions per second 3



Decimal point selection Jumper (non-solder)


Overrange indication Flashing display

Display resolution 1/20000 max.

Digital display LED

Analog output ±5 Vdc or 4 mA to 20 mA (optional)


Accuracy ±0.03 %

Amplifier frequency re-sponse

dc to 250 Hz

Common mode rejection 80 db

Fine scan adjustment < ±15 %

Coarse scan adjustment > 80 %

Fine zero adjustment < ±15 %

Coarse zero adjustment > 80%


Input range 0.5 mV/V to 5 mV/V52c. 5 mV/V to 50 mV/V

Analog output Filter setting 260 Hz58t. Optional filter setting (10 Hz, 30 Hz, 10 kHz, 27 kHz)

Alarm outputs 58a. Hi-lo limits

Display options

58c. Peak/hold58d. Track/hold

Power supply 110 Vac60a. 220 Vac60c. Battery powered (12 Vdc)56a. 4 mA to 20 mA output

Front panel 51d. Custom front panel

Mounting options 51a. Rack mount adapter51c. NEMA enclosure



Honeywell • Sensing and Control 3

Digital Display/Signal ConditionerCOMPREHENSIVE SIgNAL CONDITIONINg

FLExIbLE PLATFORM

ACCESSORIES AND OPTIONS DIMENSIONS


Sensing and Control


Honeywell



+1-815-235-6847



Model GM Digital Display/Signal Conditioner












Programmable Single-Channel Transducer Indicator/Conditioner

Model SC500








automatically.


input channel includes an excitation power supply and either

an isolated voltage (optional) or isolated current analog output

(optional).




current amplifiers



Available output channels for the SC500 include:

• ContactrelaysforthetwoformCorthreeformAoptionallimits


In addition to the physical input and output channels, up to three

virtual channels can be configured to assist in many potential

applications.

FEATURES• Choiceoftransducerinputs

• Small1/8DINformfactor

• Automaticsetup,calibrationviasigcal

• Shunt-cal,mV/Vorknownloadcalibration

• Peak/valleycapture

• OptionalanalogoutputandRS-232/RS-485

• Fieldselectablefrequencyresponse(upto250Hz)and

calibration

• Uptothreevirtualchannels(optional)

• CEapproved



Model SC500

PhySICAl SPECIFICATIONS


Formfactor 1/8DIN








Powersupplytype ac (with included wall-mount adapter) or dc

dc power supply requirements

10Vdcto26Vdc@1A

ac wall-mount adapter (included)

Interchangeable plugs for use in the Americas, Europe, theUnitedKingdomandAustralia(100Vacto240Vac)



Displaytype Vacuumfluorescent

Numericdisplayformat +999999to-999999(0,1,2,3,4,5decimal places)

Digitsize,normalmode(HxW)

5mmx2,5mm[0.2inx0.1in](withengineering units)

Digitsize,largemode(HxW)

10mmx5mm[0.4inx0.2in](noengi-neering units)

Engineering units display 4characters,availableinnormalmodeonly

Displayupdatepersecond 4

lIMITS OUTPUT (OPTIONAl) SPECIFICATIONS


Quantity 2FormCor3FormA(factoryoption)

Responsetime Same as input

Relayenergizedwhensignal is

less than, greater than, inside or outside set points

Contact ratings 1A@30Vdc,0.5A@50Vac

ANAlOg OUTPUT (OPTIONAl) SPECIFICATIONS


Voltagerange 5Vdc,±5Vdc,10Vdcor±10Vdc(fieldselectable)

Isolation 500V

Digital-to-analogresolution 15bits

Frequencyresponse Same as input

COMMUNICATIONS OUTPUT (OPTIONAl) SPECIFICATIONS


Serial setup and output IsolatedRS-232orRS-485(factory option)

Max. baud rate 38400Baud


Output options

53a.RS-232(notavailablewith53d)53d.RS-485(notavailablewith53a)58a.Twolimitset-pointswithformCcontact

relays(notavailablewith58h)58h.Threelimitset-pointswithformAcontact

relays(notavailablewith58a)58i.Isolateddigital-to-analog(DAC)voltage

NotRoHScompliant





TyPICAl SySTEM DIAgRAM

FlExIblE AND ExPANDAblE PlATFORM

Forreferenceonly

INPUT

Strain gage millivolts

high level volts/mA

ac/ac dis-placement transducer

Order code AE236 AE237 AE238

Transducer type

Unamplifiedpressure or load

Amplified pres-sureorload,dc/dc displace-ment transducer

Displacementtransducer

Range 0.5mV/Vto21mV/V


0.1VRMSto15VRMS

Frequency response and resolu-tion

See table below See table below See table below

Calibration type (field selectable)

Shunt,mV/V,2-,3-,or5-pointknownload

Shunt,2-,3-,or5-pointknownload


Transducer excitation

5Vdc@60mAmax.

12Vdc,±15Vdc,28Vdc

3Vac@5kHz

Push button 100 % tare

Yes Yes Yes

Push button shunt test

Yes Yes No


Frequency response (hz) field selectable


Strain gage high level ac/ac dis-placement transducer

2(fastmode)

40 ±50000 ±50000 ±25000

2 440 ±50000 ±50000 ±25000

8 110 ±25000 ±25000 ±15000

16 55 ±20000 ±25000 ±10000

32 28 ±10000 ±20000 ±10000

50 16 ±5000 ±15000 ±5000

100 8 ±5000 ±10000 ±5000

250 3 ±2000 ±10000 ±2000



Model SC500

SC500 CAPAbIlITIES



User selectable display options Different alarm configurations (optional)




SC500 CAPAbIlITIES

User selectable filtering Math channel (optional) can act like PlC

Sig cal auto setup Analog and digital outputs (optional)


Sensing and Control


Honeywell



+1-815-235-6847



Model SC500 Programmable Single-Channel Transducer Indicator/Conditioner

warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecific warranty details. If warranted goods are returned to Honeywellduringtheperiodofcoverage,Honeywellwillrepairor replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall honeywell be liable for consequential, special, or indirect damages.







wARNINgMISUSE OF DOCUMENTATION




Model NK

DESCRIPTIONThe Model NK portable instrument features a full 4 1/2 digit LCD

display and is designed for use in remote field operations as a

portable calibrator or readout device. Shunt calibration offers the

operator quick field setup with a minimum of warm-up. A peak/

hold feature is optional.

FEATURES• Strain-gage/bridge-basedtransducerinput

• 4-1/2digitLEDdisplay

• Batterypowered

• Analogoutputoption

• NotRoHScompliant

Portable LCD Display/Signal Conditioner



Model NK

GENERAL SPECIFICATIONS



Material Deep drawn Aluminum case





Power requirement Batteries-4“D”cells

FRONT PANEL SPECIFICATIONS


Digital display 4-1/2 digits LCD

Environmentallysealed Weatherproof case

POWER SUPPLY SPECIFICATIONS


Power requirements 4“D”cells

PhYSICAL ChARACTERISTICS SPECIFICATIONS



TRANSDUCER INTERFACE SPECIFICATIONS


Transducer excitation 4 Vdc

Types of inputs accepted 0.5 mV/V to 4 mV/V

Transducer bridge range 350 ohm

Pushbutton shunt cal Yes

Calibration method Manual

Electricalconnectiontype PT02A-10-6S1

Zero balance ± 15 % of full scale (min.)

Noise and ripple 30 microvolts

AMPLIFIER ChARACTERISTICS SPECIFICATIONS


Full scale outputs available 0 V to 1 V (optional)

Output impedance < 1 ohm (optional)

Non-linearity ±0.02 % of full scale (max.)

Drift, zero ±5 mV (max.)

Drift, span ±5 mV (max.)

Stability, zero 0.1 % of full scale/year

Stability, span 0.1 % of full scale/year

Frequency response 1000Hz

Span adjustment, fine ±15 % of range

Span adjustment, coarse 100 % of range

Zero adjustment, fine ±15 % of range

Zero adjustment, coarse 100 % of range

Short circuit protection Yes

DIGITAL DISPLAY ChARACTERISTICS SPECIFICATIONS


Number of display characters

4-1/2

Conversion/second 1.5

Scaling 0-19999



Polarity indications Yes

Programmable decimal points

Yes


Overrange indication Yes

Resolution 1/20000

Type LCD

Max. sensitivity 0.1 microvolt/count

Peak/hold Yes (optional)


Input 52c. 10 mV/V to 40 mV/V

Output 56e. 0 Vdc to 1 Vdc

Special features58c. Peak/hold58m. Knob zero and span adjustments



Portable Display/Signal Conditioner

WIRING CODES

Wiring codes

A (+) excitation

B (+) sense

C (-) excitation

D (-) sense

E (-) input

F (+) input


TYPICAL SYSTEM DIAGRAM

FEATURES

For reference only


Sensing and Control


Honeywell



+1-815-235-6847



Model NK Portable Display/Signal Conditioner




For more information about Sensing and Control products, visit www.honeywell.com/sensing or call [email protected]

WARNINGPERSONAL INJURY






Notes

1.PT06A-10-6P(SR)matingconnector,ordercodeAA119


Model HH

DESCRIPTIONThe model HH handheld instrument features a full 3-1/2 digit

LCD display and is designed for use in remote field operations

as a portable calibrator or readout device. Shunt calibration of-

fers the operator quick field setup with a minimum of warm-up. A

peak/hold feature is standard.

FEATURES• Strain-gage/bridgebasedtransducerinput

• 31/2digitLCDdisplay

• Batterypowered

• Peakholdandshuntcalfeatures

Portable LCD Display/Signal Conditioner



Model HH




Material Hand-held plastic case

ENVIRONMENTAl SPECIFICATIONS




Powerrequirement Battery-one9Vcell

PhySICAl ChARACTERISTICS SPECIFICATIONS



POwER SUPPly SPECIFICATIONS


Powerrequirements One9Vcell

FRONT PANEl SPECIFICATIONS


Digital display 3-1/2 digits LCD

TRANSDUCER INTERFACE SPECIFICATIONS


Transducer excitation 2.5Vdc

Types of inputs accepted 0.5mV/Vto8mV/V

Transducer bridge 120 ohm min.

Pushbuttonshuntcal Yes

Calibration method Manual

Electrical connection type 4 banana jacks

Zero balance ±15 % of full scale (min.)

Noise and ripple 30 microvolts

AMPlIFIER ChARACTERISTICS SPECIFICATIONS


Non-linearity ±0.1 % of full scale (max.)

Drift, zero ±50mV(max.)

Drift, span ±50mV(max.)

Stability, zero 1.0 % of full scale/year

Stability, span 1.0 % of full scale/year

Frequency response 5 Hz

Fine span adjustment ±15 % of range

Fine zero adjustment ±15 % of range

Short circuit protection Yes

DIGITAl DISPlAy ChARACTERISTICS SPECIFICATIONS


Number of display characters

3½

Conversion/second 3

Scaling 0-1999



Polarityindications Yes

Programmabledecimalpoints

Yes


Overrange indication Yes

Resolution 1/2000

Type LCD

Maximum sensitivity 0.1 microvolt/count

Peak/hold Yes


Input 52c.10mV/Vto40mV/V

Not RoHS compliant


Sensing and Control


Honeywell



+1-815-235-6847



Model HH Portable Display/Signal Conditioner

warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall honeywell be liable for consequential, special, or indirect damages.



For more information about Sensing and Control products, visit www.honeywell.com/sensingorcall+1-815-235-6847Email inquiries to [email protected]









For reference only


Portable Strain Display Load Cell/Force Indicator

Model 7561-PSD

DESCRIPTIONThe 7561-PSD is a completely portable strain gage/bridge-based

battery-powered indicator, packaged in a small, robust IP65/

NEMA 4 enclosure. For simplified use, the operator only has ac-

cess to six keys.

Two separate ranges are available which enable the instrument

to read and display two units of measure.

The menu options offer the ability to tailor the instrument’s re-

sponse to the application. Gross, net, peak, and trough (valley)

measurements are easily selected. An annunciator indicates

which range has been selected. There is also a window, to insert

a legend, describing each range. Once these parameters are

set, it provides the user with the simplest of indicators.

FEATURES• PoweredbytwoAAinternalbatteries

• Portable,handheldprecisioninstrumentweighingonly250g

• Tactilekeyboard,withdual-rangeselection,peak/valley

hold, gross/net, and on/off controls

• Microprocessorbased,allowingsingle-passcalibration

facility

• Dualrangefacility

• Acceptsaninputrangeofupto50mV/V

• EnvironmentallysealedtoIP65/NEMA4

• 7½digitLCDdisplay,withbattery,peak,trough,net,error,

and shunt cal indication

• One-yearwarranty

• Autosleep



Model 7561-PSD



Input type Strain gage full-bridge sensors

Input range Upto±5mV/V(±50mV/Vcanbesup-plied with factory-set option)

Nonlinearity ±0.005%FSD

Thermal drift <25ppm/°C

Excitation voltage 5Vdc(±4%),59mAmax.current

Bridge resistance, min. 85ohm(4off350ohmsensorsinparal-lel)

Internal battery Two off AA size alkaline, access via sealed rear compartment

Battery life 45hours(typ.450hoursinlowerpowermode)with350ohmsensor

Update rate Upto40ms(canbesetinconfigurationmenu)

MEChANICAl SPECIFICATIONS


Electrical connection 5-pin Binder socket (mating plug supplied)

Physicalsize(HxWxD) 152mmx90mmx34mm[5.98inx3.5inx1.39in]

Weight 260g

Legends Insert legends for engineering unit identification (supplied)



Operating temperature -10°Cto50°C[14°Fto122°F]

Environmental rating IP65 (when mating plug fitted)

INDICATION SPECIFICATIONS


Display type 7½digitLCDdisplay,8.8mmhighdigits

Display resolution 1partin250000at1Hzupdaterate;1partin65000at10Hzupdaterate

Annunciators Lowbatterywarning:peak,trough;hold;net;shuntcal;range

CONTROl vARIAblES SPECIFICATIONS


Front panel user keys Tactilekeyswithrecessedrimsfor:

On/off/trough Switches power on/off displays trough read.

Range Selects between two ranges

Peak Displays peak reading

Hold Switches hold on/off

Gross/net Toggles between gross/net readings

Shunt cal Putsinshuntcalmode(100Kresis.)

Settable parameters Tare/zerovalue;displayresolution/deci-malpointposition;displayupdaterate;lowpowermode;autopoweroff


SensingandControl


Honeywell



+1-815-235-6847



Model 7561-PSD Portable Strain Display Load Cell/Force Indicator




FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Email inquiries to [email protected]








Strain Gage Transducer SimulatorModel TS

DESCRIPTIONThe Model TS is a strain gage transducer simulator for use in

calibration or testing display/indicators and signal conditioning

amplifiers (pressure, force, torque or weigh systems). It greatly

assists in trouble shooting, and testing of systems that use strain

gage transducers. The Model TS simulates either a 350 ohm or

5000 ohm strain gage transducer bridge with precise adjust-

ments for transducer sensitivities in five ranges in 0.5 mV/V to

10 mV/V. The output adjustments are in 10 % increments from 0

to 100 % of each of the above ranges. No batteries to replace

as the excitation voltage is supplied by the instrument to be

calibrated.

FEATURES• Easytouse

• Simulateseither350or5000ohmtransducerbridge

• Rugged,weatherproofcase

• Precisionwire-woundresistors



Model TS







Input excitation requirements

4.5 Vdc to 12 Vdc, constant voltage only

Input resistance 350 ohm or 5000 ohm

Fullscaleoutputranges 0.5 mV/V, 1 mV/V, 2 mV/V, 5 mV/V and 10 mV/V

Output adjustment 0 % to 100 % in 10 % steps

Output linearity and hysteresis, typical

±0.05 % of full scale

Output linearity and hysteresis, maximum

±0.10 % of full scale

Output zero balance, 350 ohm resistance

±100 microvolts max.

Output zero balance, 5000 ohm resistance

0.01 % of full scale max.

PhySICAL SPECIFICATIONS


Connections Binding posts for use with wire or ba-nana jackets

Casesize(WxHxD) 17,8cmx12,7cmx12,7cm[7inx5inx5in]

Casematerial Aluminum

Weight 1kg[2.5lb]


TyPICAL SySTEM DIAgRAM

Forreferenceonly

NotRoHScompliant


SensingandControl


Honeywell



+1-815-235-6847



Model TS Strain Gage Transducer Simulator

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall honeywell be liable for consequential, special, or indirect damages.

Whileweprovideapplicationassistancepersonally,throughourliterature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.



WARNINgPERSONAL INJURy







model dv-05 din - steven engineeringmodel dv-05 din rail mount in-line amplifier warranty. honeywell...

Documents