ml230 ethernet aggregation switchml230 ethernet ... access mode/dsl... · • ieee 802.3ah ethernet...

2
Highlights IEEE 802.3ah Ethernet in the First Mile (EFM) 2Base-TL Solution CE 2.0, CE 1.0 - MEF 9, 10, 14 Rapid Service Deployment Carrier-Class Redundancy Carrier-Class OAM Superior Rate, Reach & Reliability through EFMplus and DRB Low Delay and Jitter for Voice and Video Transmission Worldwide Spectral Compliancy NEBS III, FCC, UL, CE Environmentally Hardened Markets Served ILECs, CLECs, IOCs, PTTs, and Alternative Carriers Federal, State and Local Government Agencies Education, Health Care, Utilities, and Private Campuses Applications DSLAM Backhaul Fast Internet Access MDU/MTU Backhaul Metro Ethernet Extension Private Campus Network Intra-Connection Transparent LAN Service WiFi and Cellular Backhaul The Actelis ® ML230 is a compact, next-generation Ethernet aggregation platform that delivers high-speed Ethernet services. With Actelis’ best-in-class Ethernet over copper solutions, incorporating EFMplus™ and DRB technologies, the ML230 delivers unprecedented Rate, Reach and Reliability over existing copper facilities, enabling wide-scale deployment of Ethernet services and infrastructure. The ML230 is available with front and rear access options and installs within minutes, providing immediate deployment of broadband services. The ML230 offers a density of up to 64 ports per Rack Unit (RU). The ML230 is interoperable with any standard Ethernet switch or router and aligned with Metro Ethernet Forum (MEF) recommendations, enabling Actelis’ systems to seamlessly integrate into Carrier Ethernet networks. Architecturally, the ML230 platform serves as a Central Office (CO) aggregator in a Point-to-Multipoint topology connecting to multiple ML600 (copper) and ML500 (fiber) Ethernet Access Devices (EADs). For copper deployments, each ML600 EAD is connected to the ML230 via a High Speed Link (HSL) comprising 1-8 bonded-copper pairs and offering up to 100Mbps per HSL. A number of ML230 systems can be stacked in a Star or Ring topology, providing flexible topology layouts and higher port density per uplink. To meet higher bandwidth and/or reach requirements, the Actelis ML230 can be used as an EAD, bonding up to 32 pairs per HSL and offering more than 400Mbps per HSL. The ML230 HSLs can be used both for aggregation and service distribution. The ML230 has a single Service Dispatcher Unit (SDU) slot and two Multiport Line Unit (MLU) slots, allowing for incremental service growth, MLP (Modem Line Port) redundancy and flexible modem allocation (any modem to any HSL) using pluggable cards. A variety of SDU and MLU cards exist, supporting different numbers of Ethernet and modem ports per chassis. The MLU-32EF, MLU-32ER, MLU- 32DF and MLU-32DR line units offer 32 G.SHDSL.bis modems per card and up to 64 modems per shelf. The MLU-64DR and MLU-64DF line units offer a superior density of 64 G.SHDSL ports per card and up to 128 ports per ML230. When equipped with MLU-64DR/DF or MLU-32DR/DF, the ML230 offers significantly increased performance over bonded copper by utilizing Actelis’ DRB technology. The SDU-450 linecard series offer advanced Ethernet switching capability as well as multiple uplinks, providing flexible integration into Ethernet and SONET/SDH networks. The ML230’s Small Form-factor Pluggable (SFP) ports accept standard 100Base-FX, 1000Base-FX, 2500BaseFX, 1000Base-T and T3/E3 modules. Digital Diagnostics Monitoring (DDM) capabilities are supported for enhanced diagnostic and troubleshooting. The ML230 can dramatically increase reach by utilizing Actelis’ XR239 G.SHDSL EFM repeaters and Actelis’ PFU-8x units for repeaters remote powering. The ML230 can support up to 8 hops (9 segments), with each XR239 supporting 2 copper pairs. The ML230 supports current and evolving MEF service requirements, supporting 2000 EVC flows meters, policing and shapers. Additionally, the ML230 provides 802.1q VLAN-aware wire-speed bridging, optimizes multicast switching by IGMP v1/v2 snooping, performs double tagging (VLAN stacking) for end-user VLAN transparency, applies 802.1p COS classification and marking, as well as supports per port egress rate limiting. Service resiliency can be assured using Ethernet Ring Protection Switching (ERPS) (G.8032), offering sub-50ms protection switching. In addition, RSTP/ STP, Automatic Protection Switch (APS) and Link Aggregation (LAG) protocols are supported on all Ethernet ports. ML230 Ethernet Aggregation Switch ML230 Ethernet Aggregation Switch

Upload: trandan

Post on 13-Mar-2018

225 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: ML230 Ethernet Aggregation SwitchML230 Ethernet ... access mode/dsl... · • IEEE 802.3ah Ethernet in the First Mile (EFM) 2Base-TL Solution • CE 2.0, CE 1.0 - MEF 9, 10, 14

Highlights• IEEE802.3ahEthernetintheFirstMile(EFM)2Base-TLSolution• CE2.0,CE1.0-MEF9,10,14• RapidServiceDeployment• Carrier-ClassRedundancy• Carrier-ClassOAM• SuperiorRate,Reach&ReliabilitythroughEFMplusandDRB• LowDelayandJitterforVoiceandVideoTransmission• WorldwideSpectralCompliancy• NEBSIII,FCC,UL,CE• EnvironmentallyHardened

Markets Served• ILECs,CLECs,IOCs,PTTs,andAlternativeCarriers• Federal,StateandLocalGovernmentAgencies• Education,HealthCare,Utilities,andPrivateCampuses

Applications• DSLAMBackhaul• FastInternetAccess• MDU/MTUBackhaul• MetroEthernetExtension• PrivateCampusNetworkIntra-Connection• TransparentLANService• WiFiandCellularBackhaul

The Actelis® ML230 is a compact, next-generation Ethernet aggregation platform that delivers high-speed Ethernet services.

WithActelis’best-in-classEthernetovercoppersolutions,incorporatingEFMplus™andDRBtechnologies,theML230deliversunprecedentedRate,ReachandReliabilityoverexistingcopperfacilities,enablingwide-scaledeploymentofEthernetservicesandinfrastructure.TheML230isavailablewithfrontandrearaccessoptionsandinstallswithinminutes,providingimmediatedeploymentofbroadbandservices.TheML230offersadensityofupto64portsperRackUnit(RU).TheML230isinteroperablewithanystandardEthernetswitchorrouterandalignedwithMetroEthernetForum(MEF)recommendations,enablingActelis’systemstoseamlesslyintegrateintoCarrierEthernetnetworks.

Architecturally,theML230platformservesasaCentralOffice(CO)aggregatorinaPoint-to-MultipointtopologyconnectingtomultipleML600(copper)andML500(fiber)EthernetAccessDevices(EADs).Forcopperdeployments,eachML600EADisconnectedtotheML230viaaHighSpeedLink(HSL)comprising1-8bonded-copperpairsandofferingupto100MbpsperHSL.AnumberofML230systemscanbestackedinaStarorRingtopology,providingflexibletopologylayoutsandhigherportdensityperuplink.Tomeethigherbandwidthand/orreachrequirements,theActelisML230canbeusedasanEAD,bondingupto32pairsperHSLandofferingmorethan400MbpsperHSL.TheML230HSLscanbeusedbothforaggregationandservicedistribution.

TheML230hasasingleServiceDispatcherUnit(SDU)slotandtwoMultiportLineUnit(MLU)slots,allowingforincrementalservicegrowth,MLP(ModemLinePort)redundancyandflexiblemodemallocation(anymodemtoanyHSL)usingpluggablecards.AvarietyofSDUandMLUcardsexist,supportingdifferentnumbersofEthernetandmodemportsperchassis.TheMLU-32EF,MLU-32ER,MLU-32DFandMLU-32DRlineunitsoffer32G.SHDSL.bismodemspercardandupto64modemspershelf.TheMLU-64DRandMLU-64DFlineunitsofferasuperiordensityof64G.SHDSLportspercardand

upto128portsperML230.WhenequippedwithMLU-64DR/DForMLU-32DR/DF,theML230offerssignificantlyincreasedperformanceoverbondedcopperbyutilizingActelis’DRBtechnology.

TheSDU-450linecardseriesofferadvancedEthernetswitchingcapabilityaswellasmultipleuplinks,providingflexibleintegrationintoEthernetandSONET/SDHnetworks.TheML230’sSmallForm-factorPluggable(SFP)portsacceptstandard100Base-FX,1000Base-FX,2500BaseFX,1000Base-TandT3/E3modules.DigitalDiagnosticsMonitoring(DDM)capabilitiesaresupportedforenhanceddiagnosticandtroubleshooting.

TheML230candramaticallyincreasereachbyutilizingActelis’XR239G.SHDSLEFMrepeatersandActelis’PFU-8xunitsforrepeatersremotepowering.TheML230cansupportupto8hops(9segments),witheachXR239supporting2copperpairs.

TheML230supportscurrentandevolvingMEFservicerequirements,supporting2000EVCflowsmeters,policingandshapers.Additionally,theML230provides802.1qVLAN-awarewire-speedbridging,optimizesmulticastswitchingbyIGMPv1/v2snooping,performsdoubletagging(VLANstacking)forend-userVLANtransparency,applies802.1pCOSclassificationandmarking,aswellassupportsperportegressratelimiting.ServiceresiliencycanbeassuredusingEthernetRingProtectionSwitching(ERPS)(G.8032),offeringsub-50msprotectionswitching.Inaddition,RSTP/STP,AutomaticProtectionSwitch(APS)andLinkAggregation(LAG)protocolsaresupportedonallEthernetports.

ML230 Ethernet Aggregation SwitchML230 Ethernet Aggregation Switch

Page 2: ML230 Ethernet Aggregation SwitchML230 Ethernet ... access mode/dsl... · • IEEE 802.3ah Ethernet in the First Mile (EFM) 2Base-TL Solution • CE 2.0, CE 1.0 - MEF 9, 10, 14

ML230

Actelis Networks® is the leading global supplier of Carrier Ethernet over Copper broadband solutions for telecom service providers, enterprises and municipalities. Deployed by more than 350 customers worldwide, Actelis is accelerating broadband services to businesses and residential subscribers through award-winning products and technologies. All content included in this document is the exclusive property of Actelis Networks, Inc., and protected by U.S. and international copyright laws. Specifications are subject to change without notice. Actelis® and Actelis Networks® are registered trademarks. EFMplus™ and MetaASSIST™ are trademarks of Actelis. Any other trademarks used herein are the property of their respective owners. Copyright ©2013. All Rights Reserved. Learn more at www.Actelis.com.

Corporate Headquarters Actelis Networks, Inc. 47800 Westinghouse Drive Fremont, CA 94539 t. +1 510-545-1045 or toll-free in U.S. 1-866-ACTELIS

Company and General Information: [email protected]

Asia Pacific Sales: [email protected]

Central and Latin America Sales: [email protected]

Europe, Middle East and Africa Sales: [email protected]

North America Sales: [email protected]

ML230

03.06.13

TheML230providesenhancedtroubleshootingandOAMcapabilities.TheML230offersproactiveandreactivetoolsfordynamictroubleshootingandmonitoringcapabilities.AdvancedCarrier-classEFMOAM,including802.3ah,CFM(802.1ag)andY.1731(ITU),areincorporated,offeringphysicallink,servicelevelend-to-endadvancedtroubleshooting,aswellasperformanceandServiceLevelAgreement(SLA)monitoringmechanisms.Inaddition,theML230supportsbandwidthutilizationmonitoringperportandEVC,aswellasEthernetframestriggering.Time-DomainReflectometer(TDR)capability,integratedaspartoftheML230alongwithexternalMetallicLoopTest(MLT)connectivity,enables

aneffectivetroubleshootingtooltolocatemostDSL-affectingcopperproblems.Theinformationgatheredincludesaccurateend-to-endlooplengthmeasurement,aswellasidentificationofvariousfaulttypesimpactingsignalcontinuitybetweenloopspans.

TheML230canbemanagedIn-BandandOut-of-BandbyActelis’MetaASSIST™ViewgraphicalcraftapplicationandviaActelis’multiplatformElementManagementSystem,MetaASSISTEMS.ThemanagementprotocolsincludeSNMPusingstandardMIBs,defactostandardCLI,andstandardTL1commandlineinterfaceforseamlessintegrationwiththird-partyNetworkManagementSystems(NMS).

SpecificationsSystem• Service Dispatching Units: 1SDU-450series• Modem Line Units:2MLUcards:

MLU-32ER/EF,MLU-32DR/DF,MLU-64DR/DF• Max Copper pairs:128• Redundancy: EthernetFacilityredundancy,

Modemport/pairredundancy,Powerinputredundancy

• End-to-End Delay: 2-4ms(typical)

ProductInterfacesEthernet (Network/User) No.ofinterfacesSDUmodeldependant• 10/100Base-T Ports:RJ45,Auto-MDIX• 100/1000Base-T (option):RJ45,Auto-MDIX• 1000/2500Base-FX (option): SFPbased,MSA

compliantHigh Speed Link (Bonded Copper Pair Link)• HSLs (max):128• Protocol:IEEE802.3ah2Base-TL• Linecode: ITU-TG.991.2rev.2• Copper Pairs per HSL:1-8withML600,1-32with

ML230• Bandwidth per HSL:1-100Mbpsw/ML600,

Exceeding400Mbpsw/ML230SDU-450/MLU-32• Connector: 1xDIN128-pin,rearaccess,perslot,

2x50-pinTelco,frontaccess(MLU-32EF);64-pairsFCIConnectorforfrontaccessMLU-32/64DFcards

• Cross-talkCancellationDynamicRateBoost(DRB)

• Spectral Compliance: ITU-TG.991.2(AnnexA,B,F,G);ETSITS101524(AnnexE);ANSIT1.417,T1.426;Percountryregulatorycompliantspectralmodes

• SpectralFriendliness DynamicSpectralShaping(DSS)

• Sealing (Wetting) Current*:48V/1.5mAnominal(Note:*SealingcurrentwillnotbesupportedonAdd-Dropconfi.)

Copper Pair Testing Tools• Time Domain Reflectometer: Looplength

measurement,faulttypesidentifications(presenceandlocation)

• External Metallic Loop Testingt:2RJ45connectors,anycopperpair

Management (Out-of-Band). • 10/100Base-T Connector:RJ45,Auto-MDIX• Craft EIA RS-232 (DCE) Connector:DB9• Dial-upModemEIARS-232(DTE);Connector: DB9• Alarm Contacts 4 Input; 4 Output Connector:

DB15andWire-wrap

EthernetCapabilities&Protocols• Dynamic Bridging:IEEE802.1• VLAN Tagging:IEEE802.1Q• Double Tagging:Q-in-Q,VMAN• IGMP Snooping: IGMPv1/v2(SDU-450series)• RSTP,STP:IEEE802.1d• LinkAggregation:IEEE802.3ad• ERPS:ITU-TG.8032• ProviderBridges:IEEE802.1ad• LLDP:IEEE802.1ab

QualityofService• Classes of Service:2Kqueuespersystem• Scheduler:4SP,WFQineachSP• QueueManagement:TailDrop• Classification:Port/L2802.1p/Qpriorities

FrontPanelIndicatorsSystem• PowerA/B• Critical/Major/Minor• ACO(AlarmCut-Off)/LMT(LampTest)ButtonCard• ActiveStatus• ACT(Activity)/LNK(Link):PerEthernetport

ManagementProtocols• SNMP:SNMPV3,V2C,V1• IPaddresses:IPV4andIPV6• CommandLineInterface:TL1,CLI• RemoteAccess:Telnet• SecureAccess(option):SSHv2• TimeSynchronization:SNTPv3• RadiusAuthentication:RFC2856• WebAccess:HTTP

• FileTransfer:FTP,TFTP• EFMOAM:IEEE802.3ahclause57• CFM:IEEE802.3ag• ServiceOAM:ITUY.1731Applications• EMS:MetaASSIST™EMS• CraftGUI:MetaASSIST™View

Physical• Chassis:19”• MountingRack:19”,23”orETSIrackWallmount• DimensionsHeight:3.5”/88mm(2U) Depth:11”/278mmwithcablemanagement Width: 17.2”/438.55mm• Weight:7.7lbs/3.5Kg(chassisonly)• Plug-inCards:3horizontal,frontloading• Power DC:-48/-72VDCnominal,dualA+B,90

Wattminconfiguration(1xSDU,1xMLU-32);130Wattforfullyloadedsystem(1xSDU,2xMLU-32);210Wattforfullyloaded,high-densitysystem(1xSDU,2xMLU-64)

Environmental• Operating Temp.:-40°to+65°C(-40°to+149°F)**• Storage Temp.: -40°to+75°C(-40°to+167°F)• Relative humidity: Upto95%,non-cond. (Note:**TestedinaccordancewithNEMAtemperaturerequirements

withMLU-32XXcards)

RegulatoryCompliance/CertificationsMetro Ethernet Forum• CE2.0,CE1.0-MEF9,10,14Safety• UL60950,CSAC22.260950EN60950,IEC60950EMC• FCCPart15ClassA,ICES-003ClassA,ETSIEN

300386,ETSI,ETS300132-2,ITU-TK.20NEBS• LevelIII(GR-1089-CORE,GR-63-CORE)CE• EMCandSafetyEnvironmental• GR-63-CORE;ETSIETS300019