minicolor v minicolor g gravicolor · smart solutions excellent mixing ... individual applications...

BlendingLinesmart solutions

Excellent mixing quality with highestrepeatability are demanding require-ments when dosing additives andregrind directly on the processingmachine. Motan MINICOLOR andGRAVICOLOR dosing and mixing unitsmeet these requirements to a highdegree.

The MINICOLOR and GRAVICOLORseries are specially designed forinjection moulding and extrusion. Inno-vative design, high quality engineeringand technical specifications, guaranteeoptimum performance and reliability ofthe units.

MINICOLOR VMINICOLOR GGRAVICOLORDosing and mixing units

BlendingLine smart 27.03.2008, 17:50 Uhr1

2

smart solutions, is an additional range ofequipment for optimising and automating theproduction around plastics processing machines.

All units can be combined or expanded in order tosatisfy increasing and changing requirements.smart solutions help the plastics processor toequip their individual machines or production cells.In the case of injection moulding, extrusion or blowmoulding machines, cost savings can be easilyachieved with minimum outlay.

Individual applications and problems are rapidlysolved and may be the first steps towards a latersystem solution. smart solutions correspond toMotan's high quality standard in spite of lowerprices and are available through Motan's worldwidedistribution and service network. All units may ofcourse be integrated into system solutions.

• Material bins for clean and clearly arrangedmaterial storage

• Dryers for energy saving material drying to adefined residual moisture, or removing surfacemoisture and preheating of material

• Conveying equipment for automatic materialtransport and supply to the machine

• Dosing and mixing units for self colouring oraddition of additives and regrind

• Mobile granulators for sprues and rejects as wellas the introduction of regrind to the material flow

• Temperature control units to maintain thetemperature for optimum conditioning of injectionmoulds

smart solutions: to increase productivity with the

least capital expenditure.

Examples for step-by-step automation of injection moulding machines.


3

1. Hopper loader for automatic machine feeding2. Material storage bin3. Debagging station4. Temperature control units5. Granulators for granulating sprues with material recirculation6. MINICOLOR V, volumetric colouring unit7. MINICOLOR G, gravimetric colouring unit8. GRAVICOLOR, dosing and mixing unit9. LUXOR HD, hot air dryer10. LUXOR CA, compressed air dryer11. LUXOR, dry air dryer12. Blower station13. Central blower station with filter


4

The demand for an excellent mixing quality andconsistently accurate dosing are a must whencombining additives with the virgin material at theprocessing machine.

The volumetric dosing and blending unit MINI-COLOR V meets and exceeds these requirements.Mounted between the machine hopper and thefeed throat of the plastics processing machine itrequires very little space.

A stainless steel cruciform in the mixing throatdivides the main component into two streams ofmaterial. They flow together with the additives atthe feed inlet producing a homogeneous mixture.

The optional METRO VL, a small compressed airloader, can be used to fill the additive hopperquickly.

MINICOLOR VMETRO VLDosing and mixing unit

General view of all dosing and mixing units

MINICOLOR V* MINICOLOR G S* MINICOLOR G A* GRAVICOLOR 30 MD GRAVICOLOR 60 GRAVICOLOR 100Dosing system volumetric gravimetric gravimetric gravimetric gravimetric gravimetricNumber of possible dosing heads 2 1 2 4 4 4Dosing range main component 1 - 100% 1 - 100% 1 - 100%Dosing range additive with dosing screw G1 0.15 - 2.5kg/h 0.15 - 2.5kg/h 0.15 - 2.5kg/h 0.1 - 10% 0.5 - 10% 0.3 - 10%Dosing range additive with dosing screw G2 1.4 - 20kg/h 1.4 - 20kg/h 1.4 - 20kg/hDosing range additive with dosing screw G3 2.7 - 27kg/h 2.7 - 27kg/h 2.7 - 27kg/hMost cost effective solution for colouring of masterbatch •Most cost effective solution for automatic calibration •Most cost effective solution for weighing all components •Additive/masterbatch mixing and dosing unit • • •Automatic calibration • • • • •Recipe management •** • • • • •Process documentation (throughput acquisition etc.) • • • •Can be networked (Ethernet) • • • •Additives and main components are dosed • • •IntelliBlend for highest dosing and mixing accuracy • • •Micro dosing for minimum quantities •* Processes also extruder tachometer signal.** Only with COLOR A.


5

(6)

(3)

(5)

(4)

(2)

(1)

METRO VL/MINICOLOR G VL (Fig. 1)The Venturi loader can be used for the automaticfilling of the additive hopper with granulate. Bothunits are installed by replacing the additive hopperlid and can easily be retro-fitted.

With METRO VL a level sensor in the hoppersignals the need for material and ensures that thehopper never runs empty. With MINICOLOR G VLthis is done using a weigh scale.

Mounting flange (Fig. 2)The mounting flange is designed so that it caneasily be mounted on different sized feed throats(min. 74mm - max. 90mm) without the need fordrilling.

Mixing neck (Fig. 3)The mixing cruciform is made of stainless steel. Itseparates the main material from the additives untilthey meet just above the throat of the processingmachine. They then flow together, resulting in anoptimum mix with no material separation.

Dosing (Fig. 4)The special angled dosing head eliminates materialtrickle. There are three different sizes of wearresistant dosing screws available and they can beremoved without the use of tools. During calibrationthe dosing head can be withdrawn in order tocollect and weigh the additive sample.

Controls

There are two types of controls available, anddosing can be either continuous for extrusionapplications or during screw-back time for injectionmachines. In conjunction with the brushless motorand control, the MINICOLOR V offers one of themost consistent and repeatable dosing rates on themarket today.

MINICOLOR S (Fig. 5)The standard control for either one or two dosingheads is available with or without timer.

COLOR A (Fig. 6)The innovative microprocessor control is designedfor optimum performance, simplicity of use andoffers:

four selectable material types for up to twodosing unitsrecipe management”plug and play” easy to use and no manualrequired for start-upadjustable low material level alarmmultiple external signal input/output options


6

MINICOLOR G S

Compact gravimetric dosing and mixing unit for onemain component and one masterbatch or additive ingranular form suitable for injection mouldingmachines, extruders and blow moulding machines.With the GRAVInet MC control up to two dosingheads can be operated.

The unit is based on the well tried MINICOLORconcept with gravity mixing funnel guaranteeing ahomogeneous material mix and eliminatingseparation.

The dosing station for masterbatch or additive sitson a robust but extremely precise load-cell and

GRAVI S control

• Separate microprocessor control with membranekeyboard and 3m connection cable to the mixingunit MINICOLOR G S. Thus, no thermalinfluence. User friendly location possible.

• Colour or additive rate is simply entered aspercentage.

• 5-digit-display with symbols for the variousoperational states.

• Potential-free alarm output and external signalinput (external contact) for the dosing cycle.

• Connection of hopper loaders for automatic fillingof the additive storage bins.

• Storage of 10 recipes possible.

• Display of the additive throughput.

• At power failure, recipe and unit data are bufferedand not lost.


7

MINICOLOR G A

Load-cell

operates using loss-in-weight metering technology.This offers operational security for high levelrequirements.

MINICOLOR G A enables easy addition of regrind.Due to automatic calibration, the commissioningtime is extremely short.

The MINICOLOR G is insensitive to vibrations andis specially designed for mounting directly onto thefeed throat of the processing machine.

GRAVInet MC control

• Separate control with 3m connection cable to themixing unit MINICOLOR G A. Thus no thermalinfluence. User-friendly location possible.

• Easy handling through colour graphic display withtouch-screen and image guided operatorinterface.

• Potential-free alarm output and external signalinput (external contact) for the dosing cycle.

• Storage of up to 50 recipes possible.

• Detailed report function via ethernet.

• Automatic adjustment of the masterbatch dosingdepending on the regrind percentage.

• Unit with two dosing heads enables fast colourchange.


MINICOLOR

8

MINICOLOR VMINICOLOR G

METRO VL/MINICOLOR G VL

METRO VL

MINICOLOR G VL

Your benefits

• Infinitely variable dosing quantity• Wear resistant dosing screw• Fast and easy to clean

Cost savings through

• no warehousing of pre-colouredmaterial

• fast material changes formasterbatch

• minimal additive usage• maintenance free dosing motor

(not MINICOLOR G S)

Production reliability through

• inclined dosing screw (no materialtrickle)

Additional benefits for MINICOLOR G

• Highest dosing reliability throughloss-in-weight technology

• Recipe management• Acquisition of throughput rates• Simple operation


• automatic calibration• potential savings with masterbatch

and additives• automatic monitoring of the dosing

throughput and adjustment to chang-ing bulk densities

Technical data MINICOLOR V

Number of dosing stations 1 or 2

Dosing capacity (kg/h)* dosing motor i = 55:1 dosing motor i = 30:1

G1S (kg/h) 0.1 - 1.5 0.15 - 2.5

G2S (kg/h) 0.7 - 12 1.4 - 20

G3S (kg/h) 1.5 - 20 2.7 - 27

Volume of storage hopper (l) 12

Control unit MINICOLOR S and COLOR A

External contact potential-free

Connected load (W) 150

Power supply 1/N/PE (V/Hz) 230/50

Weight (approx. kg) 15 (without control)

* Varies with bulk density. Indicated values for masterbatch: bulk density = 0.8kg/dm3.

Subject to technical changes.

Technical data MINICOLOR G

Number of dosing stations 1 or 2

Dosing capacity (kg/h)* dosing motor i = 55:1 dosing motor i = 30:1

G1S (kg/h) 0.1 - 1.5 0.15 - 2.5

G2S (kg/h) 0.7 - 12 1.4 - 20

G3S (kg/h) 1.5 - 20 2.7 - 27

Volume of storage hopper (l) 12

Control unit GRAVI S and GRAVInet MC

External contact potential-free

Connected load (W) 150

Power supply 1/N/PE (V/Hz) 230/50

Weight (approx. kg) 16 (without control)

* Varies with bulk density. Indicated values for masterbatch: bulk density = 0.8kg/dm3.

* The following items are included with delivery: 3m material hose and a suction pipe.** The Conveying capacity refers to a conveying distance of 5m at a height of 3m. The

information refers to materials with a bulk density of 0.6kg/dm3.

Technical dataLoader type* METRO VL/MINICOLOR G VLConveying capacity (kg/h)** max. 100Mode of conveying compressed airCompressed air, oil and water free (bar) 2 - 7Air consumption (m3/h) max. 78Power supply 1/N/PE (V/Hz) 230/50Weight (ca. kg) 2


9

GRAVICOLORGravimetric dosing andmixing units

Motan's GRAVICOLOR units mix andblend up to four materials precisely andwith maximum accuracy of blend. Thesemodular gravimetric blenders aredesigned for injection, blow mouldingand extrusion and provide throughputsup to 150kg/h.

Independent of recipes, materials or theoperational environment, IntelliBlendanalyses all process data achieving thebest possible operating point at any timethrough continuous self-optimisation.Recipe integrity results in an excellentand consistent product quality.

The GRAVICOLOR series forms part ofthe total Motan range of products andsystems for all stages of the manage-ment, conditioning and preparation ofplastic granules. Build quality plus theengineering and service standards whichMotan applies to all parts of its operationensure high performance and reliableoperation.

Dosing

Except for the additive micro-dosing onthe GRAVICOLOR 30 MD, all compo-nent materials are metered by theunique Motan cone-dosing system. Thisdosing system ensures that a high totalmaterial throughput can be achieved,even when metering a large number ofadditives.

On the GRAVICOLOR 30 MD, additivesor masterbatch are metered by an inno-vative and highly accurate micro-dosingunit. The additive is dosed into theweigh bin using a vertically aligned feed-screw.

GRAVICOLOR 30 MD

Cone-dosing

Micro-dosing GRAVICOLOR 30 MD


10

GRAVICOLOR 100

GRAVICOLOR 60

Material storage bin

The stainless steel storage bins are of modular design andavailable in several different sizes. Some can be removedand all are easily accessible for cleaning. The designfeatures provide optimum flexibility for processing diffe-rent materials.

Monitoring

Large sight glasses in the storage bins and the front door ofthe units allow visual control of the entire dosing and mixingprocess.

Installation

GRAVICOLOR units can either be mounted on theprocessing machine or operated as a central mixing station.In the latter case, an optional support frame with hopperand suction box is available.

GRAVIreport (optional)With this PC program process data of up to 252 GRAVICOLORunits can be captured and evaluated via Ethernet.

Conveying

All GRAVICOLOR units can optionally be equipped with anintegrated conveying control which allows the control of upto seven hopper loaders with a blower station; i.e. materialhandling for a 4-component mixing station with processingmachine can, for example, be controlled and operateddirectly via the GRAVICOLOR.

For the installation of complex systems there is the possi-bility of networking several GRAVICOLOR units with eachother or with other Motan controls of the CONTROLnetfamily. This guarantees a high degree of flexibility.

Mixing chamber

The specially developed mixing chamber guarantees totalhomogenisation of the batches.


11

GRAVICOLOR 30 MD

GRAVICOLOR

Recipe accuracy through IntelliBlend

This dosing system ensures a high total material throughput,even when metering large quantities of additives. Since eachcomponent is weighed individually and using IntelliBlend, anextraordinary recipe accuracy is achieved.

Cleaning and material changes

Fast material changes require easy access to all parts incontact with the material, to ensure efficient cleaning.Hinged lids and large, removable sight glasses ordemountable storage bins enable complete and thoroughcleaning of the bins.

Material changes are facilitated and simplified by thelarge front door, the removable weigh bin and the easilyaccessible mixing chamber.

All GRAVICOLOR parts in contact with material are madeof stainless steel, preventing contamination of thegranulate.

GRAVInet control

The operating unit can either be mounted on theGRAVICOLOR or operated remotely. In addition,integrated Ethernet technology enables operation via aMotan WEBpanel or a PC from any location. Furthercharacteristics are:

• colour graphics display with touch panel operation,• simple intuitive handling via standardised user

interface,• powerful and accurate process control with IntelliBlend,

continuous self-optimisation and sophisticated vibrationmanagement,

• detailed report and print functions via network or serialinterfaces,

• integrated network interface (Ethernet) as well asInternet technology,

• integrated conveying control (optional),• recipe management,• possibility to set up coupled line systems (optional),• LINKnet interface for visualisation (optional).

Blue: Recipe accuracy with IntelliBlendRed: Recipe accuracy without IntelliBlend


www.motan.com

GRAVICOLOR

03_0

8_3.

4

All dimensions in mm.

Technical data GRAVICOLOR 30 MD 60 100

Standard number of dosing stations 4 4 4

Average throughput (kg/h) 60 90 150

Dosing range per main component (%) 1 -100 1 -100 1 - 100

Dosing range per additive (%) 0.1 - 10 0.5 - 10 0.3 - 10

Volume of hopper for main component (l) 7 18 18

Volume of hopper for additive (l) 7 18 18

Power supply 1/N/PE (V/Hz) 230/50 230/50 230/50

Connected load (W) 100 100 250

Protection class IP 54/42 IP 54/42 IP 54/42

Compressed air (bar) 6 - 8 6 - 8 6 - 8

Weight without support frame (approx. kg) 60 70 80

Your benefits

• Documented production process(report and print function via Ethernetor serial interface)

• Simple operation through colour graficdisplay with toch-screen – no pro-gramming necessary

• Regrind management

• Integrated network connection(Ethernet) as standard


• guaranteeing recipe integrity andlowest possible additive consumptionusing IntelliBlend

• high productivity and consistentproduct quality

• small space requirement

• fast and easy cleaning

• fast and easy material change

• regrind management, preventing anoverdose of other components

• versatile operation (central mixing unitor machine mounted unit)

• integrated conveying control (option)

Production reliability through

• continuous self-optimisation by set/actual comparison

• maximum repeatability and extra-ordinary recipe accuracy throughIntelliBlend

Subject to technical changes.


minicolor v minicolor g gravicolor · smart solutions excellent mixing ... individual applications...

Documents