MG Welding's Full Line of Stainless Steel Electrodes

®

Quality in Raw Materials

Before any raw materials are used in the manufacturing process, they are rigorously evaluated for purity and consis-tency with in-house Quality Assurance Standards. Core wires are inspected for length and roundness tolerances to make

sure there is no batch-to-batch variation…Quality Guaranteed!

Quality in Manufacture

MG Welding Slik-Stik welding electrodes are backed by over a century of manufacturing excellence. Through extensiveR&D activities, a closely monitored quality assurance system, batch testing, and final bench testing means… SatisfactionGuaranteed!

Quality in Testing

Every batch of Slik-Stik electrodes is line-monitored for flux tolerance, slow-cured for better moisture control, and finallyelectric furnace baked under computer control. These critical elements assure that the flux coating becomes densifiedfor better cleaning action during welding and enhanced resistance to moisture absorption…Superior WeldabilityGuaranteed!

Quality in Packaging

Packed in air-tight barrier bags for porosity-free welds right out of the box, MG's Slik-Stik line of coated stainlesselectrodes has long been a favorite of welders in all industries. A compliment of MIG, TIG, and Flux cored wires roundout the MG line.

Quality in Welding

When welding stainless steels, quality should never be assumed. Welders depend on MG's Slik-Stik as a high-quality, easy-to-use electrode for superior welds.

Quality Packaging• Crush-proof carton• Air-Tight barrier bag• Moisture resistant• Complete “how-to-use” information• Uniform product content• "No mistake" markings

Available Exclusively Through Authorized Distributors

MG Slik-Stik Features & BenefitsBetter current carrying capacity and specially designed fl ux coating.

Reduced overheating allows up to 67% lessstub loss.

Runs 10-15 amps lower with smoother spray-typetransfer.

Easier to weld out of position with reduceddanger to surrounding fi nished surfaces.

Slag is virtually self releasing.Minimize clean up and reduce risk of inclusions in multi-pass welds.

Flat or concave fi llets formed.Reduces fi nish time, better looking welds,smooth beads with extremely fi ne ripples.

Quality manufacturing and packaging.High quality, porosity-free welds right out of the box everytime!

PRODUCT TYPICAL INDUSTRIAL USES INDUSTRY

MG Slik-Stik

6308

Recommended for welding food processing, chemical, refinery &brewery equipment when fabricated from AISI grades 302, 304,and 308. AC or DCEP (+)

• Chemical• Brewery• Restaurant Equipment• Refi neries

MG Slik-Stik

6308L

A lower carbon version of 6308. It should be used when welding AISI grade 308L typically used for dairy equipment, pulp & paper assemblies, textile dyeing vats, and refinery equipment. Polarity: AC or DCEP (+).

• Dairy• Textile• Pulp & Paper• Railroad

MG Slik-Stik

6309

Frequently used when welding heat exchangers, kiln linings andheat treating equipment. Ideal for use when welding clad 18-8steels to reduce dilution problems. Polarity: AC or DCEP (+).

• Chemical• Petroleum• Pharmaceutical• Steel Plants

MG Slik-Stik

6309L

A lower carbon version of 6309 and is commonly used for chemical processing equipment, furnace-handling gear and forwelding stainless steels to mild, and low carbon steels.Polarity: AC or DCEP (+).

• Heat Treating• Pump Manufacturers• Food Processing

MG Slik-Stik

6310

Typically used when welding dissimilar steels and for high temperature applications such as kiln linings, heat-treatingbaskets, etc. Excellent for use on paper digesters.Polarity: AC or DCEP (+).

• Chemical Processing• Furnace Operators• Kiln Manufacturer

MG Slik-Stik

6312

An all-position electrode for critical joining and repair of tool & die steels, spring steels, and for joining high carbon steels. Excellent as an under-pass alloy to help reduce HAZ cracking. Polarity: AC or DCEP (+).

• Mining• Tool & Die• Transportation• Pulp & Paper

MG Slik-Stik

6316

Contains molybdenum for enhanced corrosion resistance togeneral as well as some forms of pitting corrosion. Slik-Stik 6316can withstand corrosive attacks by sodium and calcium brines,hypochlorite solutions, phosphoric acid; and the sulfate liquorsand sulphurous acids used in the pulp & paper industry. Polarity: AC or DCEP (+).

• Textile• Petroleum• Refi nery• Pharmaceutical

MG Slik-Stik

6316L

A lower carbon version of 6316. The lower carbon content improves resistance to inter-granular corrosion due to carbide precipitation. Widely used in food processing, pharmaceutical,and chemical processing equipment. Polarity: AC or DCEP (+).

• Food Processing• Petro-Chemical• Marine• Brewing

MG Slik-Stik 6316 LVD

A vertical-down version of 6316L with similar application properties. Polarity: AC or DCEP (+).

• Pulp & Paper• Brewing• Food Processing• Textile

MG Slik-Stik

6317L

Similar to 6316L but with a higher alloy content includingmolybdenum. It is typically used to weld alloys of similarcomposition, and for severe corrosion applications involving sulphurous and sulphurous acids and associated salts.Polarity: AC or DCEP (+).

• Chemical Processing• Pulp & Paper• Air Pollution

MG Slik-Stik

6347

Suitable for applications involving temperatures above 750°F(400°C), for example heat exchangers, boiler parts. Weld depositshave good general corrosion resistance due to the columbiumcontent. Polarity: AC or DCEP (+).

• Oil Refi ning• Boiler Operation• Pressure Valves

MG Slik-Stik Product-Use

“Superior alloys made in the USA”

MG Welding ProductsN94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USAP 800-558-8524 • F 262-255-5542

Customer Service Technical Services +1 262-532-4677

Statement of Liability: Due to variations inherent in specifi c applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fi tness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affi liates shall have no liability in respect thereof. 09-20

BASE METAL GRADES FILLER METALAISI Standard1 UNS2 ACI Standard3 Slik-Stik AWS

Grade 301 S30100 ------------------ 6308 E308-16

Grade 302 S30200 CF-20 HF 6308 E308-16

Grade 304 S30400 CF-8 6308 E308-16

Grade 304L S30403 CF-3 6308L E308L-16

Grade 308 S30800 CF-16F 6308 E308-16

Grade 308L S30803 ------------------ 6308L E308L-16

Grade 309 S30900 HH 6309 E309-16

Grade 309S S30908 CH-20 6309L E309L-16

Grade 310 S31000 CK-20 6310 E310-16

Grade 312 S31200 CE-30 6312 E312-16

Grade 316 S31600 CF-8M 6316 E316-16

Grade 316L S31603 CF-3M 6316L E316L-16

Grade 316L4 S31603 CF-3M 6316L-VD4 E316L-16

Grade 317 S31700 CG-8M 6317 E317-16

Grade 317L S31703 ------------------ 6317L E317L-16

Grade 347 S34700 CF-8C 6347 E347-16

1) American Iron & Steel Institute 3) American Casting Institute

2) Unifi ed Numbering System 4) Vertical-down electrode

MG Slik-Stik Cross Reference

MIG Wire TIG RodProduct 0.023 0.035 0.045 1/16 0.035 0.045 1/16 3/32 1/8

SOLI

D

ER308H x x x x xER308L x x x x x x x x

ER308LSi x x x x x x xER309 x x x x x

SER309L x x x x x xER309LSi x x x x

ER310 x x xER316H x x xER316L x x x x x x x x

ER316LSi x x x x xER317L x x xER347 x x x x

FCW

ER308LT1-1 x xER309LT1-1 x xER316LT1-1 x x

MG Slik-Stik Companion Products

In addition to Slik-Stik electrodes, MG Welding of-fers a full line of electrodes and wires encompassinghardfacing, cast iron, aluminum, copper/bronze andmany specialty products that may be ordered with aPOP Display. Contact your MG sales person for infor-mation on pricing and availability.